Subversion Repositories or1k

/* $Id: memreg.h,v 1.1.1.1 2001-09-10 07:44:43 simons Exp $ */
#ifndef _SPARC_MEMREG_H
#define _SPARC_MEMREG_H
/* memreg.h:  Definitions of the values found in the synchronous
 *            and asynchronous memory error registers when a fault
 *            occurs on the sun4c.
 *
 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
 */
 
/* First the synchronous error codes, these are usually just
 * normal page faults.
 */
 
#define SUN4C_SYNC_WDRESET   0x0001  /* watchdog reset */
#define SUN4C_SYNC_SIZE      0x0002  /* bad access size? whuz this? */
#define SUN4C_SYNC_PARITY    0x0008  /* bad ram chips caused a parity error */
#define SUN4C_SYNC_SBUS      0x0010  /* the SBUS had some problems... */
#define SUN4C_SYNC_NOMEM     0x0020  /* translation to non-existent ram */
#define SUN4C_SYNC_PROT      0x0040  /* access violated pte protections */
#define SUN4C_SYNC_NPRESENT  0x0080  /* pte said that page was not present */
#define SUN4C_SYNC_BADWRITE  0x8000  /* while writing something went bogus */
 
#define SUN4C_SYNC_BOLIXED  \
        (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
         SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
 
/* Now the asynchronous error codes, these are almost always produced
 * by the cache writing things back to memory and getting a bad translation.
 * Bad DVMA transactions can cause these faults too.
 */
 
#define SUN4C_ASYNC_BADDVMA 0x0010  /* error during DVMA access */
#define SUN4C_ASYNC_NOMEM   0x0020  /* write back pointed to bad phys addr */
#define SUN4C_ASYNC_BADWB   0x0080  /* write back points to non-present page */
 
#endif /* !(_SPARC_MEMREG_H) */