Subversion Repositories or1k

/*
 *  linux/init/main.c
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 *
 *  GK 2/5/95  -  Changed to support mounting root fs via NFS
 *  Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96
 *  Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96
 */
 
/*
 * Revisions, including NO_MM, CONFIG_CONSOLE, and do_shell fix
 * by Kenneth Albanowski <kjahds@kjahds.com>,
 * Copyright (C) 1997, 1998 The Silver Hammer Group, Ltd.
 *
 */  
 
 
#define __KERNEL_SYSCALLS__
#include <stdarg.h>
/*
#include <asm/system.h>
*/
#include <asm/io.h>
 
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/head.h>
#include <linux/unistd.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/fs.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/utsname.h>
#include <linux/ioport.h>
#include <linux/hdreg.h>
#include <linux/mm.h>
#include <linux/major.h>
#include <linux/blk.h>
#ifdef CONFIG_ROOT_NFS
#include <linux/nfs_fs.h>
#endif
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
#ifdef CONFIG_APM
#include <linux/apm_bios.h>
#endif
 
#include <asm/bugs.h>
/*int printk(const char *fmt, ...);
*/
 
/*
 * Versions of gcc older than that listed below may actually compile
 * and link okay, but the end product can have subtle run time bugs.
 * To avoid associated bogus bug reports, we flatly refuse to compile
 * with a gcc that is known to be too old from the very beginning.
 */
#if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 6)
#error sorry, your GCC is too old. It builds incorrect kernels.
#endif
 
extern char _stext, _etext;
extern const char *linux_banner;
 
static char printbuf[1024];
 
extern int console_loglevel;
 
static int init(void *);
extern int bdflush(void *);
#ifndef NO_MM
extern int kswapd(void *);
extern void kswapd_setup(void);
#endif /* !NO_MM */
 
extern void init_IRQ(void);
extern void init_modules(void);
extern long console_init(long, long);
extern long kmalloc_init(long,long);
extern void sock_init(void);
extern unsigned long pci_init(unsigned long, unsigned long);
extern void sysctl_init(void);
 
extern void no_scroll(char *str, int *ints);
extern void swap_setup(char *str, int *ints);
extern void buff_setup(char *str, int *ints);
extern void panic_setup(char *str, int *ints);
extern void bmouse_setup(char *str, int *ints);
extern void msmouse_setup(char *str, int *ints);
extern void lp_setup(char *str, int *ints);
extern void eth_setup(char *str, int *ints);
extern void xd_setup(char *str, int *ints);
extern void xd_manual_geo_init(char *str, int *ints);
extern void floppy_setup(char *str, int *ints);
extern void st_setup(char *str, int *ints);
extern void st0x_setup(char *str, int *ints);
extern void advansys_setup(char *str, int *ints);
extern void tmc8xx_setup(char *str, int *ints);
extern void t128_setup(char *str, int *ints);
extern void pas16_setup(char *str, int *ints);
extern void generic_NCR5380_setup(char *str, int *intr);
extern void generic_NCR53C400_setup(char *str, int *intr);
extern void aha152x_setup(char *str, int *ints);
extern void aha1542_setup(char *str, int *ints);
extern void gdth_setup(char *str, int *ints);
extern void aic7xxx_setup(char *str, int *ints);
extern void AM53C974_setup(char *str, int *ints);
extern void BusLogic_Setup(char *str, int *ints);
extern void ncr53c8xx_setup(char *str, int *ints);
extern void eata2x_setup(char *str, int *ints);
extern void u14_34f_setup(char *str, int *ints);
extern void fdomain_setup(char *str, int *ints);
extern void in2000_setup(char *str, int *ints);
extern void NCR53c406a_setup(char *str, int *ints);
extern void sym53c416_setup(char *str, int *ints);
extern void wd7000_setup(char *str, int *ints);
extern void dc390_setup(char* str, int *ints);
extern void ppa_setup(char *str, int *ints);
extern void scsi_luns_setup(char *str, int *ints);
extern void sound_setup(char *str, int *ints);
extern void apm_setup(char *str, int *ints);
extern void reboot_setup(char *str, int *ints);
extern void video_setup(char *str, int *ints);
#ifdef CONFIG_CDU31A
extern void cdu31a_setup(char *str, int *ints);
#endif CONFIG_CDU31A
#ifdef CONFIG_MCD
extern void mcd_setup(char *str, int *ints);
#endif CONFIG_MCD
#ifdef CONFIG_MCDX
extern void mcdx_setup(char *str, int *ints);
#endif CONFIG_MCDX
#ifdef CONFIG_SBPCD
extern void sbpcd_setup(char *str, int *ints);
#endif CONFIG_SBPCD
#ifdef CONFIG_AZTCD
extern void aztcd_setup(char *str, int *ints);
#endif CONFIG_AZTCD
#ifdef CONFIG_CDU535
extern void sonycd535_setup(char *str, int *ints);
#endif CONFIG_CDU535
#ifdef CONFIG_GSCD
extern void gscd_setup(char *str, int *ints);
#endif CONFIG_GSCD
#ifdef CONFIG_CM206
extern void cm206_setup(char *str, int *ints);
#endif CONFIG_CM206
#ifdef CONFIG_OPTCD
extern void optcd_setup(char *str, int *ints);
#endif CONFIG_OPTCD
#ifdef CONFIG_SJCD
extern void sjcd_setup(char *str, int *ints);
#endif CONFIG_SJCD
#ifdef CONFIG_ISP16_CDI
extern void isp16_setup(char *str, int *ints);
#endif CONFIG_ISP16_CDI
#ifdef CONFIG_BLK_DEV_RAM
static void ramdisk_start_setup(char *str, int *ints);
static void load_ramdisk(char *str, int *ints);
static void prompt_ramdisk(char *str, int *ints);
static void ramdisk_size(char *str, int *ints);
#ifdef CONFIG_BLK_DEV_INITRD
static void no_initrd(char *s,int *ints);
#endif
#endif CONFIG_BLK_DEV_RAM
#ifdef CONFIG_ISDN_DRV_ICN
extern void icn_setup(char *str, int *ints);
#endif
#ifdef CONFIG_ISDN_DRV_HISAX
extern void HiSax_setup(char *str, int *ints);
#endif
#ifdef CONFIG_ISDN_DRV_PCBIT
extern void pcbit_setup(char *str, int *ints);
#endif
 
#ifdef CONFIG_ATARIMOUSE
extern void atari_mouse_setup (char *str, int *ints);
#endif
#ifdef CONFIG_DMASOUND
extern void dmasound_setup (char *str, int *ints);
#endif
#ifdef CONFIG_ATARI_SCSI
extern void atari_scsi_setup (char *str, int *ints);
#endif
extern void wd33c93_setup (char *str, int *ints);
extern void gvp11_setup (char *str, int *ints);
 
#ifdef CONFIG_CYCLADES
extern void cy_setup(char *str, int *ints);
#endif
#ifdef CONFIG_DIGI
extern void pcxx_setup(char *str, int *ints);
#endif
#ifdef CONFIG_RISCOM8
extern void riscom8_setup(char *str, int *ints);
#endif
#ifdef CONFIG_SPECIALIX
extern void specialix_setup(char *str, int *ints);
#endif
#ifdef CONFIG_BAYCOM
extern void baycom_setup(char *str, int *ints);
#endif
#ifdef CONFIG_LCDDMA
extern void lcddma_init(void);
#endif
#ifdef CONFIG_DAC0800
extern void dac0800_init(void);
#endif
#ifdef CONFIG_DACI2S
extern void daci2s_init(void);
#endif
#if defined(CONFIG_T6963_DMA) || defined(CONFIG_T6963_PIO) 
extern void t6963fb_init(void);
#endif
 
#ifdef CONFIG_PARIDE_PD
extern void pd_setup(char *str, int *ints);
#endif
#ifdef CONFIG_PARIDE_PF
extern void pf_setup(char *str, int *ints);
#endif
#ifdef CONFIG_PARIDE_PT
extern void pt_setup(char *str, int *ints);
#endif
#ifdef CONFIG_PARIDE_PG
extern void pg_setup(char *str, int *ints);
#endif
#ifdef CONFIG_PARIDE_PCD
extern void pcd_setup(char *str, int *ints);
#endif
#ifdef CONFIG_BLK_CPQ_DA
#ifdef CONFIG_BLK_CPQ_DA_EISA
extern void cpqarray_setup(char *str, int *ints);
#endif
#endif
 
#if defined(CONFIG_SYSVIPC) || defined(CONFIG_KERNELD)
extern void ipc_init(void);
#endif
 
/*
 * Boot command-line arguments
 */
#define MAX_INIT_ARGS 8
#define MAX_INIT_ENVS 8
 
extern void time_init(void);
 
static unsigned long memory_start = 0;
static unsigned long memory_end = 0;
 
int rows, cols;
 
#ifdef CONFIG_BLK_DEV_RAM
extern int rd_doload;		/* 1 = load ramdisk, 0 = don't load */
extern int rd_prompt;		/* 1 = prompt for ramdisk, 0 = don't prompt */
extern int rd_size;		/* Size of the ramdisk(s) */
extern int rd_image_start;	/* starting block # of image */
#ifdef CONFIG_BLK_DEV_INITRD
int real_root_dev;		/* MUST be int for sysctl! */
#endif
#endif
 
int root_mountflags = MS_RDONLY;
char *execute_command = 0;
 
int serial_debug = 0;
 
#ifdef CONFIG_ROOT_NFS
char nfs_root_name[NFS_ROOT_NAME_LEN] = { "default" };
char nfs_root_addrs[NFS_ROOT_ADDRS_LEN] = { "" };
#endif
 
extern void dquot_init(void);
 
//static char * argv_init[MAX_INIT_ARGS+2] = { "ping", "10.1.1.2", NULL, };
static char * argv_init[MAX_INIT_ARGS+2] = { NULL, };
static char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
 
static char * argv_rc[] = { "/bin/sh", NULL };
static char * envp_rc[] = { "HOME=/", "TERM=linux", NULL };
 
static char * argv[] = { "-/bin/sh",NULL };
static char * envp[] = { "HOME=/usr/root", "TERM=linux", NULL };
 
char *get_options(char *str, int *ints)
{
	char *cur = str;
	int i=1;
 
	while (cur && isdigit(*cur) && i <= 10) {
		ints[i++] = simple_strtoul(cur,NULL,0);
		if ((cur = strchr(cur,',')) != NULL)
			cur++;
	}
	ints[0] = i-1;
	return(cur);
}
 
static void profile_setup(char *str, int *ints)
{
	if (ints[0] > 0)
		prof_shift = (unsigned long) ints[1];
	else
#ifdef CONFIG_PROFILE_SHIFT
		prof_shift = CONFIG_PROFILE_SHIFT;
#else
		prof_shift = 2;
#endif
}
 
struct kernel_param {
	const char *str;
	void (*setup_func)(char *, int *);
} ;
 
struct kernel_param bootsetups[] = {
	{ "reserve=", reserve_setup },
	{ "profile=", profile_setup },
#ifdef CONFIG_BLK_DEV_RAM
	{ "ramdisk_start=", ramdisk_start_setup },
	{ "load_ramdisk=", load_ramdisk },
	{ "prompt_ramdisk=", prompt_ramdisk },
	{ "ramdisk=", ramdisk_size },
	{ "ramdisk_size=", ramdisk_size },
#ifdef CONFIG_BLK_DEV_INITRD
	{ "noinitrd", no_initrd },
#endif
#endif
	{ "swap=", swap_setup },
	{ "buff=", buff_setup },
	{ "panic=", panic_setup },
#ifdef CONFIG_CONSOLE
	{ "no-scroll", no_scroll },
#endif
#ifdef CONFIG_BUGi386
	{ "no-hlt", no_halt },
	{ "no387", no_387 },
	{ "reboot=", reboot_setup },
#endif
#ifdef CONFIG_INET
	{ "ether=", eth_setup },
#endif
#ifdef CONFIG_PRINTER
        { "lp=", lp_setup },
#endif
#ifdef CONFIG_SCSI
	{ "max_scsi_luns=", scsi_luns_setup },
#endif
#ifdef CONFIG_SCSI_ADVANSYS
	{ "advansys=", advansys_setup },
#endif
#if defined(CONFIG_BLK_DEV_HD)
	{ "hd=", hd_setup },
#endif
#ifdef CONFIG_CHR_DEV_ST
	{ "st=", st_setup },
#endif
#ifdef CONFIG_BUSMOUSE
	{ "bmouse=", bmouse_setup },
#endif
#ifdef CONFIG_MS_BUSMOUSE
	{ "msmouse=", msmouse_setup },
#endif
#ifdef CONFIG_SCSI_SEAGATE
	{ "st0x=", st0x_setup },
	{ "tmc8xx=", tmc8xx_setup },
#endif
#ifdef CONFIG_SCSI_T128
	{ "t128=", t128_setup },
#endif
#ifdef CONFIG_SCSI_PAS16
	{ "pas16=", pas16_setup },
#endif
#ifdef CONFIG_SCSI_GENERIC_NCR5380
	{ "ncr5380=", generic_NCR5380_setup },
	{ "ncr53c400=", generic_NCR53C400_setup },
#endif
#ifdef CONFIG_SCSI_AHA152X
	{ "aha152x=", aha152x_setup},
#endif
#ifdef CONFIG_SCSI_AHA1542
	{ "aha1542=", aha1542_setup},
#endif
#ifdef CONFIG_SCSI_GDTH
	{ "gdth=", gdth_setup},
#endif
#ifdef CONFIG_SCSI_AIC7XXX
	{ "aic7xxx=", aic7xxx_setup},
#endif
#ifdef CONFIG_SCSI_BUSLOGIC
	{ "BusLogic=", BusLogic_Setup},
#endif
#ifdef CONFIG_SCSI_NCR53C8XX
	{ "ncr53c8xx=", ncr53c8xx_setup},
#endif
#ifdef CONFIG_SCSI_EATA
	{ "eata=", eata2x_setup},
#endif
#ifdef CONFIG_SCSI_U14_34F
	{ "u14-34f=", u14_34f_setup},
#endif
#ifdef CONFIG_SCSI_AM53C974
        { "AM53C974=", AM53C974_setup},
#endif
#ifdef CONFIG_SCSI_NCR53C406A
	{ "ncr53c406a=", NCR53c406a_setup},
#endif
#ifdef CONFIG_SCSI_SYM53C416
	{ "sym53c416=", sym53c416_setup}, 
#endif
#ifdef CONFIG_SCSI_FUTURE_DOMAIN
	{ "fdomain=", fdomain_setup},
#endif
#ifdef CONFIG_SCSI_IN2000
	{ "in2000=", in2000_setup},
#endif
#ifdef CONFIG_SCSI_7000FASST
	{ "wd7000=", wd7000_setup},
#endif
#ifdef CONFIG_SCSI_PPA
        { "ppa=", ppa_setup },
#endif
#if defined(CONFIG_SCSI_DC390T) && ! defined(CONFIG_SCSI_DC390T_NOGENSUPP)
	{ "tmscsim=", dc390_setup },
#endif
#ifdef CONFIG_BLK_DEV_XD
	{ "xd=", xd_setup },
	{ "xd_geo=", xd_manual_geo_init },
#endif
#ifdef CONFIG_BLK_DEV_FD
	{ "floppy=", floppy_setup },
#endif
#ifdef CONFIG_CDU31A
	{ "cdu31a=", cdu31a_setup },
#endif CONFIG_CDU31A
#ifdef CONFIG_MCD
	{ "mcd=", mcd_setup },
#endif CONFIG_MCD
#ifdef CONFIG_MCDX
	{ "mcdx=", mcdx_setup },
#endif CONFIG_MCDX
#ifdef CONFIG_SBPCD
	{ "sbpcd=", sbpcd_setup },
#endif CONFIG_SBPCD
#ifdef CONFIG_AZTCD
	{ "aztcd=", aztcd_setup },
#endif CONFIG_AZTCD
#ifdef CONFIG_CDU535
	{ "sonycd535=", sonycd535_setup },
#endif CONFIG_CDU535
#ifdef CONFIG_GSCD
	{ "gscd=", gscd_setup },
#endif CONFIG_GSCD
#ifdef CONFIG_CM206
	{ "cm206=", cm206_setup },
#endif CONFIG_CM206
#ifdef CONFIG_OPTCD
	{ "optcd=", optcd_setup },
#endif CONFIG_OPTCD
#ifdef CONFIG_SJCD
	{ "sjcd=", sjcd_setup },
#endif CONFIG_SJCD
#ifdef CONFIG_ISP16_CDI
	{ "isp16=", isp16_setup },
#endif CONFIG_ISP16_CDI
#ifdef CONFIG_SOUND
	{ "sound=", sound_setup },
#endif
#ifdef CONFIG_ISDN_DRV_ICN
	{ "icn=", icn_setup },
#endif
#ifdef CONFIG_ISDN_DRV_HISAX
       { "hisax=", HiSax_setup },
       { "HiSax=", HiSax_setup },
#endif
#ifdef CONFIG_ISDN_DRV_PCBIT
	{ "pcbit=", pcbit_setup },
#endif
#ifdef CONFIG_ATARIMOUSE
	{ "atamouse=", atari_mouse_setup },
#endif
#ifdef CONFIG_DMASOUND
	{ "dmasound=", dmasound_setup },
#endif
#ifdef CONFIG_ATARI_SCSI
	{ "atascsi=", atari_scsi_setup },
#endif
#if defined(CONFIG_A3000_SCSI) || defined(CONFIG_A2091_SCSI) \
	    || defined(CONFIG_GVP11_SCSI)
	{ "wd33c93=", wd33c93_setup },
#endif
#if defined(CONFIG_GVP11_SCSI)
	{ "gvp11=", gvp11_setup },
#endif
#ifdef CONFIG_CYCLADES
	{ "cyclades=", cy_setup },
#endif
#ifdef CONFIG_DIGI
	{ "digi=", pcxx_setup },
#endif
#ifdef CONFIG_RISCOM8
	{ "riscom8=", riscom8_setup },
#endif
#ifdef CONFIG_SPECIALIX
	{ "specialix=", specialix_setup },
#endif
#ifdef CONFIG_BAYCOM
	{ "baycom=", baycom_setup },
#endif
#ifdef CONFIG_BLK_CPQ_DA
#ifdef CONFIG_BLK_CPQ_DA_EISA
       { "smart2=", cpqarray_setup },
#endif
#endif
	{ 0, 0 }
};
 
static struct kernel_param raw_params[] = {
 
#ifdef CONFIG_PARIDE_PD
       { "pd.", pd_setup },
#endif
#ifdef CONFIG_PARIDE_PCD
       { "pcd.", pcd_setup },
#endif
#ifdef CONFIG_PARIDE_PF
       { "pf.", pf_setup },
#endif
#ifdef CONFIG_PARIDE_PT
       { "pt.", pt_setup },
#endif
#ifdef CONFIG_PARIDE_PG
       { "pg.", pg_setup },
#endif
#ifdef CONFIG_APM
	{ "apm=", apm_setup },
#endif
       { 0, 0 }
} ;
 
 
#ifdef CONFIG_BLK_DEV_RAM
static void ramdisk_start_setup(char *str, int *ints)
{
   if (ints[0] > 0 && ints[1] >= 0)
      rd_image_start = ints[1];
}
 
static void load_ramdisk(char *str, int *ints)
{
   if (ints[0] > 0 && ints[1] >= 0)
      rd_doload = ints[1] & 3;
}
 
static void prompt_ramdisk(char *str, int *ints)
{
   if (ints[0] > 0 && ints[1] >= 0)
      rd_prompt = ints[1] & 1;
}
 
static void ramdisk_size(char *str, int *ints)
{
	if (ints[0] > 0 && ints[1] >= 0)
		rd_size = ints[1];
}
 
#endif
 
static int checksetup(char *line)
{
	int i = 0;
	int ints[11];
 
#ifdef CONFIG_BLK_DEV_IDE
	/* ide driver needs the basic string, rather than pre-processed values */
	if (!strncmp(line,"ide",3) || (!strncmp(line,"hd",2) && line[2] != '=')) {
		ide_setup(line);
		return 1;
	}
#endif
	while (bootsetups[i].str) {
		int n = strlen(bootsetups[i].str);
		if (!strncmp(line,bootsetups[i].str,n)) {
			bootsetups[i].setup_func(get_options(line+n,ints), ints);
			return 1;
		}
		i++;
	}
 
        for (i=0; raw_params[i].str; i++) {
                int n = strlen(raw_params[i].str);
                if (!strncmp(line,raw_params[i].str,n)) {
                        raw_params[i].setup_func(line+n, NULL);
                        return 1;
                }
        }
 
	return 0;
}
 
/* this should be approx 2 Bo*oMips to start (note initial shift), and will
   still work even if initially too large, it will just take slightly longer */
unsigned long loops_per_sec = 1;/*(1<<12);*/
 
#if defined(__SMP__) && defined(__i386__)
unsigned long smp_loops_per_tick = 1000000;
#endif
 
/* This is the number of bits of precision for the loops_per_second.  Each
   bit takes on average 1.5/HZ seconds.  This (like the original) is a little
   better than 1% */
#define LPS_PREC 8
 
void calibrate_delay(void)
{
	int ticks;
	int loopbit;
	int lps_precision = LPS_PREC;
 
	loops_per_sec = (1<<12);
 
	printk("Calibrating delay loop.. ");
	while (loops_per_sec <<= 1) {
		/* wait for "start of" clock tick */
		ticks = jiffies;
		while (ticks == jiffies)
			/* nothing */;
		/* Go .. */
		ticks = jiffies;
		__delay(loops_per_sec);
		ticks = jiffies - ticks;
		if (ticks)
			break;
		}
 
/* Do a binary approximation to get loops_per_second set to equal one clock
   (up to lps_precision bits) */
	loops_per_sec >>= 1;
	loopbit = loops_per_sec;
	while ( lps_precision-- && (loopbit >>= 1) ) {
		loops_per_sec |= loopbit;
		ticks = jiffies;
		while (ticks == jiffies);
		ticks = jiffies;
		__delay(loops_per_sec);
		if (jiffies != ticks)	/* longer than 1 tick */
			loops_per_sec &= ~loopbit;
	}
 
/* finally, adjust loops per second in terms of seconds instead of clocks */	
	loops_per_sec *= HZ;
/* Round the value and print it */	
	printk("ok - %lu.%02lu BogoMIPS\n",
		loops_per_sec/500000,
		(loops_per_sec/5000) % 100);
 
#if defined(__SMP__) && defined(__i386__)
	smp_loops_per_tick = loops_per_sec / 400;
#endif
}
 
static void parse_root_dev(char * line)
{
	int base = 0;
	static struct dev_name_struct {
		const char *name;
		const int num;
	} devices[] = {
		{ "nfs",     0x00ff },
		{ "loop",    0x0700 },
		{ "hda",     0x0300 },
		{ "hdb",     0x0340 },
		{ "hdc",     0x1600 },
		{ "hdd",     0x1640 },
		{ "hde",     0x2100 },
		{ "hdf",     0x2140 },
		{ "hdg",     0x2200 },
		{ "hdh",     0x2240 },
		{ "sda",     0x0800 },
		{ "sdb",     0x0810 },
		{ "sdc",     0x0820 },
		{ "sdd",     0x0830 },
		{ "sde",     0x0840 },
		{ "sdf",     0x0850 },
		{ "sdg",     0x0860 },
		{ "sdh",     0x0870 },
		{ "sdi",     0x0880 },
		{ "sdj",     0x0890 },
		{ "sdk",     0x08a0 },
		{ "sdl",     0x08b0 },
		{ "sdm",     0x08c0 },
		{ "sdn",     0x08d0 },
		{ "sdo",     0x08e0 },
		{ "sdp",     0x08f0 },
#ifdef CONFIG_BLK_DEV_DAC960
		{ "rd/c0d0p",0x3000 },
		{ "rd/c0d1p",0x3008 },
		{ "rd/c0d2p",0x3010 },
		{ "rd/c0d3p",0x3018 },
		{ "rd/c0d4p",0x3020 },
		{ "rd/c0d5p",0x3028 },
		{ "rd/c0d6p",0x3030 },
		{ "rd/c0d7p",0x3038 },
		{ "rd/c0d8p",0x3040 },
		{ "rd/c0d9p",0x3048 },
		{ "rd/c0d10p",0x3050 },
		{ "rd/c0d11p",0x3058 },
		{ "rd/c0d12p",0x3060 },
		{ "rd/c0d13p",0x3068 },
		{ "rd/c0d14p",0x3070 },
		{ "rd/c0d15p",0x3078 },
#endif
		{ "fd",      0x0200 },
		{ "xda",     0x0d00 },
		{ "xdb",     0x0d40 },
		{ "ram",     0x0100 },
		{ "scd",     0x0b00 },
		{ "mcd",     0x1700 },
		{ "cdu535",  0x1800 },
		{ "aztcd",   0x1d00 },
		{ "cm206cd", 0x2000 },
		{ "gscd",    0x1000 },
		{ "sbpcd",   0x1900 },
		{ "sonycd",  0x1800 },
		{ "rom0",    0x1f00 },
		{ "rom1",    0x1f01 },
#ifdef CONFIG_PARIDE_PD
       		{ "pda",     0x2d00 },
       		{ "pdb",     0x2d10 },
       		{ "pdc",     0x2d20 },
       		{ "pdd",     0x2d30 },
#endif
#ifdef CONFIG_PARIDE_PCD
     	  	{ "pcd",     0x2e00 },
#endif
#ifdef CONFIG_PARIDE_PF
	       	{ "pf",      0x2f00 },
#endif
		{ NULL, 0 }
	};
 
	if (strncmp(line,"/dev/",5) == 0) {
		struct dev_name_struct *dev = devices;
		line += 5;
		do {
			int len = strlen(dev->name);
			if (strncmp(line,dev->name,len) == 0) {
				line += len;
				base = dev->num;
				break;
			}
			dev++;
		} while (dev->name);
	}
	ROOT_DEV = to_kdev_t(base + simple_strtoul(line,NULL,base?10:16));
}
 
/*
 * This is a simple kernel command line parsing function: it parses
 * the command line, and fills in the arguments/environment to init
 * as appropriate. Any cmd-line option is taken to be an environment
 * variable if it contains the character '='.
 *
 *
 * This routine also checks for options meant for the kernel.
 * These options are not given to init - they are for internal kernel use only.
 */
static void parse_options(char *line)
{
	char *next;
	int args, envs;
 
	if (!*line)
		return;
	args = 0;
	envs = 1;	/* TERM is set to 'linux' by default */
	next = line;
	while ((line = next) != NULL) {
		if ((next = strchr(line,' ')) != NULL)
			*next++ = 0;
		/*
		 * check for kernel options first..
		 */
		if (!strncmp(line,"root=",5)) {
			parse_root_dev(line+5);
			continue;
		}
#ifdef CONFIG_ROOT_NFS
		if (!strncmp(line, "nfsroot=", 8)) {
			int n;
			line += 8;
			ROOT_DEV = MKDEV(UNNAMED_MAJOR, 255);
			if (line[0] == '/' || line[0] == ',' || (line[0] >= '0' && line[0] <= '9')) {
				strncpy(nfs_root_name, line, sizeof(nfs_root_name));
				nfs_root_name[sizeof(nfs_root_name)-1] = '\0';
				continue;
			}
			n = strlen(line) + strlen(NFS_ROOT);
			if (n >= sizeof(nfs_root_name))
				line[sizeof(nfs_root_name) - strlen(NFS_ROOT) - 1] = '\0';
			sprintf(nfs_root_name, NFS_ROOT, line);
			continue;
		}
		if (!strncmp(line, "nfsaddrs=", 9)) {
			line += 9;
			strncpy(nfs_root_addrs, line, sizeof(nfs_root_addrs));
			nfs_root_addrs[sizeof(nfs_root_addrs)-1] = '\0';
			continue;
		}
#endif
		if (!strcmp(line,"ro")) {
			root_mountflags |= MS_RDONLY;
			continue;
		}
		if (!strcmp(line,"rw")) {
			root_mountflags &= ~MS_RDONLY;
			continue;
		}
		if (!strcmp(line,"debug")) {
			console_loglevel = 10;
			continue;
		}
		if (!strncmp(line,"init=",5)) {
			line += 5;
			execute_command = line;
			continue;
		}
		if (checksetup(line))
			continue;
		/*
		 * Then check if it's an environment variable or
		 * an option.
		 */
		if (strchr(line,'=')) {
			if (envs >= MAX_INIT_ENVS)
				break;
			envp_init[++envs] = line;
		} else {
			if (args >= MAX_INIT_ARGS)
				break;
			argv_init[++args] = line;
		}
	}
	argv_init[args+1] = NULL;
	envp_init[envs+1] = NULL;
}
 
 
extern void setup_arch(char **, unsigned long *, unsigned long *);
extern void arch_syms_export(void);
 
#ifndef __SMP__
 
/*
 *	Uniprocessor idle thread
 */
 
int cpu_idle(void *unused)
{
	for(;;) {
		idle();
	}
}
 
#else
 
/*
 *	Multiprocessor idle thread is in arch/...
 */
 
extern int cpu_idle(void * unused);
 
/*
 *	Activate a secondary processor.
 */
 
asmlinkage void start_secondary(void)
{
	trap_init();
	init_IRQ();
	smp_callin();
	cpu_idle(NULL);
}
 
 
 
/*
 *	Called by CPU#0 to activate the rest.
 */
 
static void smp_init(void)
{
	int i, j;
	smp_boot_cpus();
 
	/*
	 *	Create the slave init tasks as sharing pid 0.
	 *
	 *	This should only happen if we have virtual CPU numbers
	 *	higher than 0.
	 */
 
	for (i=1; i<smp_num_cpus; i++)
	{
		struct task_struct *n, *p;
 
		j = cpu_logical_map[i];
		/*
		 *	We use kernel_thread for the idlers which are
		 *	unlocked tasks running in kernel space.
		 */
		kernel_thread(cpu_idle, NULL, CLONE_PID);
		/*
		 *	Don't assume linear processor numbering
		 */
		current_set[j]=task[i];
		current_set[j]->processor=j;
		cli();
		n = task[i]->next_run;
		p = task[i]->prev_run;
		nr_running--;
		n->prev_run = p;
		p->next_run = n;
		task[i]->next_run = task[i]->prev_run = task[i];
		sti();
	}
}		
 
/*
 *	The autoprobe routines assume CPU#0 on the i386
 *	so we don't actually set the game in motion until
 *	they are finished.
 */
 
static void smp_begin(void)
{
	smp_threads_ready=1;
	smp_commence();
}
 
#endif
 
/*
 *	Activate the first processor.
 */
 
asmlinkage void start_kernel(void)
{
	char * command_line;
 
/*
 *	This little check will move.
 */
#ifdef __SMP__
	static int first_cpu=1;
 
	if(!first_cpu)
		start_secondary();
	first_cpu=0;
 
#endif	
 
/*
 * Interrupts are still disabled. Do necessary setups, then
 * enable them
 */
	setup_arch(&command_line, &memory_start, &memory_end);
	memory_start = paging_init(memory_start,memory_end);
	trap_init();
	init_IRQ();
	sched_init();
	time_init();
	parse_options(command_line);
 
#ifdef CONFIG_MODULES
	init_modules();
#endif
#ifdef CONFIG_PROFILE
	if (!prof_shift)
#ifdef CONFIG_PROFILE_SHIFT
		prof_shift = CONFIG_PROFILE_SHIFT;
#else
		prof_shift = 2;
#endif
#endif
	if (prof_shift) {
		prof_buffer = (unsigned int *) memory_start;
		/* only text is profiled */
		prof_len = (unsigned long) &_etext - (unsigned long) &_stext;
		prof_len >>= prof_shift;
		memory_start += prof_len * sizeof(unsigned int);
		memset(prof_buffer, 0, prof_len * sizeof(unsigned int));
	}
	memory_start = console_init(memory_start,memory_end);
#ifdef CONFIG_PCI
	memory_start = pci_init(memory_start,memory_end);
#endif
	memory_start = kmalloc_init(memory_start,memory_end);
	sti();
	calibrate_delay();
	memory_start = inode_init(memory_start,memory_end);
	memory_start = file_table_init(memory_start,memory_end);
	memory_start = name_cache_init(memory_start,memory_end);
#ifdef CONFIG_BLK_DEV_INITRD
	if (initrd_start && initrd_start < memory_start) {
		printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
		    "disabling it.\n",initrd_start,memory_start);
		initrd_start = 0;
	}
#endif
	mem_init(memory_start,memory_end);
	buffer_init();
	sock_init();
#if defined(CONFIG_SYSVIPC) || defined(CONFIG_KERNELD)
	ipc_init();
#endif
	dquot_init();
	arch_syms_export();
	sti();
	check_bugs();
 
#if defined(CONFIG_MTRR) && defined(__SMP__)
	init_mtrr_config();
#endif
 
	printk(linux_banner);
#ifdef __SMP__
	smp_init();
#endif
	sysctl_init();
	/* 
	 *	We count on the initial thread going ok 
	 *	Like idlers init is an unlocked kernel thread, which will
	 *	make syscalls (and thus be locked).
	 */
	kernel_thread(init, NULL, 0);
 
/*
 * task[0] is meant to be used as an "idle" task: it may not sleep, but
 * it might do some general things like count free pages or it could be
 * used to implement a reasonable LRU algorithm for the paging routines:
 * anything that can be useful, but shouldn't take time from the real
 * processes.
 *
 * Right now task[0] just does a infinite idle loop.
 */
 	cpu_idle(NULL);
}
 
static int printf(const char *fmt, ...)
{
	va_list args;
	int i;
 
	va_start(args, fmt);
	write(1,printbuf,i=vsprintf(printbuf, fmt, args));
	va_end(args);
	return i;
}
 
static int do_rc(void * rc)
{
	close(0);
	if (open(rc,O_RDONLY,0))
		return -1;
	return execve("/bin/sh", argv_rc, envp_rc);
}
 
static int do_shell(void * shell)
{
	close(0);close(1);close(2);
	setsid();
	if ((int)(open("/dev/tty1",O_RDWR,0) < 0) &&
	    (int)(open("/dev/ttyS0",O_RDWR,0) < 0))
		printk("Unable to open an initial console for do_shell.\n");
 
	(void) dup(0);
	(void) dup(0);
	return execve(shell, argv, envp);
}
 
#ifdef CONFIG_BLK_DEV_INITRD
static int do_linuxrc(void * shell)
{
	static char *argv[] = { "linuxrc", NULL, };
	close(0);close(1);close(2);
	setsid();
	(void) open("/dev/tty1",O_RDWR,0);
	(void) dup(0);
	(void) dup(0);
	return execve(shell, argv, envp_init);
}
 
static void no_initrd(char *s,int *ints)
{
	mount_initrd = 0;
}
#endif
 
static int init(void * unused)
{
	int pid,i;
#ifdef CONFIG_BLK_DEV_INITRD
	int real_root_mountflags;
#endif
#ifdef CONFIG_COLDFIRE
        extern char console_device[];
#endif
	/* Launch bdflush from here, instead of the old syscall way. */
	kernel_thread(bdflush, NULL, 0);
	/* Start the background pageout daemon. */
#ifndef NO_MM
	kswapd_setup();
	kernel_thread(kswapd, NULL, 0);
#endif /* !NO_MM */
 
#ifdef CONFIG_BLK_DEV_INITRD
	real_root_dev = ROOT_DEV;
	real_root_mountflags = root_mountflags;
	if (initrd_start && mount_initrd) root_mountflags &= ~MS_RDONLY;
	else mount_initrd =0;
#endif
	setup();
#ifdef CONFIG_LCDDMA
        lcddma_init();
#endif
#ifdef CONFIG_DAC0800
        dac0800_init();
#endif
#ifdef CONFIG_DACI2S
	daci2s_init();
#endif
#if defined(CONFIG_T6963_DMA) || defined(CONFIG_T6963_PIO) 
	t6963fb_init();
#endif
 
#ifdef __SMP__
	/*
	 *	With the devices probed and setup we can
	 *	now enter SMP mode.
	 */
 
	smp_begin();
#endif	
 
	#ifdef CONFIG_UMSDOS_FS
	{
		/*
			When mounting a umsdos fs as root, we detect
			the pseudo_root (/linux) and initialise it here.
			pseudo_root is defined in fs/umsdos/inode.c
		*/
		extern struct inode *pseudo_root;
		if (pseudo_root != NULL){
			current->fs->root = pseudo_root;
			current->fs->pwd  = pseudo_root;
		}
	}
	#endif
 
#ifdef CONFIG_BLK_DEV_INITRD
	root_mountflags = real_root_mountflags;
	if (mount_initrd && ROOT_DEV != real_root_dev && ROOT_DEV == MKDEV(RAMDISK_MAJOR,0)) {
		int error;
 
	if ((open("/dev/tty1",O_RDWR,0) < 0) &&
	    (open("/dev/ttyS0",O_RDWR,0) < 0))
		printk("Unable to open an initial console.\n");
 
		pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
		if (pid>0)
			while (pid != wait(&i));
		if (real_root_dev != MKDEV(RAMDISK_MAJOR, 0)) {
			error = change_root(real_root_dev,"/initrd");
			if (error)
				printk(KERN_ERR "Change root to /initrd: "
				    "error %d\n",error);
		}
	}
#endif
 
	/*
	 *	This keeps serial console MUCH cleaner, but does assume
	 *	the console driver checks there really is a video device
	 *	attached (Sparc effectively does).
	 */
#ifdef CONFIG_COLDFIRE
        if (console_device[0] && (open(console_device,O_RDWR,0) >= 0)) {
                /* Nothing */;
        } else
#endif /* CONFIG_COLDFIRE */
	if ((open("/dev/tty1",O_RDWR,0) < 0) &&
	    (open("/dev/ttyS0",O_RDWR,0) < 0))
		printk("Unable to open an initial console.\n");
 
	(void) dup(0);
	(void) dup(0);
 
#if 0
	printf("Executing ping... ");
	execve("/bin/ping",argv_init,envp_init);
	printf("failed\n");
 
	printf("Executing nano-X... ");
	execve("/bin/landmine",argv_init,envp_init);
	printf("failed\n");
#endif
	printf("Executing sash... ");
	execve("/bin/sash",argv_init,envp_init);
	printf("failed\n");
 
	if (!execute_command) {
		execve("/etc/init",argv_init,envp_init);
		execve("/bin/init",argv_init,envp_init);
		execve("/sbin/init",argv_init,envp_init);
		/* if this fails, fall through to original stuff */
 
		pid = kernel_thread(do_rc, "/etc/rc", SIGCHLD);
		if (pid>0)
			while (pid != wait(&i))
				/* nothing */;
	}
 
	while (1) {
		pid = kernel_thread(do_shell,
			execute_command ? execute_command : "/bin/sh",
			SIGCHLD);
		if (pid < 0) {
			printf("Fork failed in init\n\r");
			continue;
		}
		while (1)
			if (pid == wait(&i))
				break;
		printf("\n\rchild %d died with code %04x\n\r",pid,i);
		sync();
	}
	return -1;
}