URL
https://opencores.org/ocsvn/or1k_old/or1k_old/trunk
Subversion Repositories or1k_old
[/] [or1k_old/] [tags/] [start/] [insight/] [gdb/] [i386-linux-tdep.c] - Rev 1782
Compare with Previous | Blame | View Log
/* Target-dependent code for Linux running on i386's, for GDB. Copyright 2000, 2001 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "defs.h" #include "gdbcore.h" #include "frame.h" #include "value.h" #include "regcache.h" /* For i386_linux_skip_solib_resolver. */ #include "symtab.h" #include "symfile.h" #include "objfiles.h" #include "solib-svr4.h" /* For struct link_map_offsets. */ /* Recognizing signal handler frames. */ /* Linux has two flavors of signals. Normal signal handlers, and "realtime" (RT) signals. The RT signals can provide additional information to the signal handler if the SA_SIGINFO flag is set when establishing a signal handler using `sigaction'. It is not unlikely that future versions of Linux will support SA_SIGINFO for normal signals too. */ /* When the i386 Linux kernel calls a signal handler and the SA_RESTORER flag isn't set, the return address points to a bit of code on the stack. This function returns whether the PC appears to be within this bit of code. The instruction sequence for normal signals is pop %eax mov $0x77,%eax int $0x80 or 0x58 0xb8 0x77 0x00 0x00 0x00 0xcd 0x80. Checking for the code sequence should be somewhat reliable, because the effect is to call the system call sigreturn. This is unlikely to occur anywhere other than a signal trampoline. It kind of sucks that we have to read memory from the process in order to identify a signal trampoline, but there doesn't seem to be any other way. The IN_SIGTRAMP macro in tm-linux.h arranges to only call us if no function name could be identified, which should be the case since the code is on the stack. Detection of signal trampolines for handlers that set the SA_RESTORER flag is in general not possible. Unfortunately this is what the GNU C Library has been doing for quite some time now. However, as of version 2.1.2, the GNU C Library uses signal trampolines (named __restore and __restore_rt) that are identical to the ones used by the kernel. Therefore, these trampolines are supported too. */ #define LINUX_SIGTRAMP_INSN0 (0x58) /* pop %eax */ #define LINUX_SIGTRAMP_OFFSET0 (0) #define LINUX_SIGTRAMP_INSN1 (0xb8) /* mov $NNNN,%eax */ #define LINUX_SIGTRAMP_OFFSET1 (1) #define LINUX_SIGTRAMP_INSN2 (0xcd) /* int */ #define LINUX_SIGTRAMP_OFFSET2 (6) static const unsigned char linux_sigtramp_code[] = { LINUX_SIGTRAMP_INSN0, /* pop %eax */ LINUX_SIGTRAMP_INSN1, 0x77, 0x00, 0x00, 0x00, /* mov $0x77,%eax */ LINUX_SIGTRAMP_INSN2, 0x80 /* int $0x80 */ }; #define LINUX_SIGTRAMP_LEN (sizeof linux_sigtramp_code) /* If PC is in a sigtramp routine, return the address of the start of the routine. Otherwise, return 0. */ static CORE_ADDR i386_linux_sigtramp_start (CORE_ADDR pc) { unsigned char buf[LINUX_SIGTRAMP_LEN]; /* We only recognize a signal trampoline if PC is at the start of one of the three instructions. We optimize for finding the PC at the start, as will be the case when the trampoline is not the first frame on the stack. We assume that in the case where the PC is not at the start of the instruction sequence, there will be a few trailing readable bytes on the stack. */ if (read_memory_nobpt (pc, (char *) buf, LINUX_SIGTRAMP_LEN) != 0) return 0; if (buf[0] != LINUX_SIGTRAMP_INSN0) { int adjust; switch (buf[0]) { case LINUX_SIGTRAMP_INSN1: adjust = LINUX_SIGTRAMP_OFFSET1; break; case LINUX_SIGTRAMP_INSN2: adjust = LINUX_SIGTRAMP_OFFSET2; break; default: return 0; } pc -= adjust; if (read_memory_nobpt (pc, (char *) buf, LINUX_SIGTRAMP_LEN) != 0) return 0; } if (memcmp (buf, linux_sigtramp_code, LINUX_SIGTRAMP_LEN) != 0) return 0; return pc; } /* This function does the same for RT signals. Here the instruction sequence is mov $0xad,%eax int $0x80 or 0xb8 0xad 0x00 0x00 0x00 0xcd 0x80. The effect is to call the system call rt_sigreturn. */ #define LINUX_RT_SIGTRAMP_INSN0 (0xb8) /* mov $NNNN,%eax */ #define LINUX_RT_SIGTRAMP_OFFSET0 (0) #define LINUX_RT_SIGTRAMP_INSN1 (0xcd) /* int */ #define LINUX_RT_SIGTRAMP_OFFSET1 (5) static const unsigned char linux_rt_sigtramp_code[] = { LINUX_RT_SIGTRAMP_INSN0, 0xad, 0x00, 0x00, 0x00, /* mov $0xad,%eax */ LINUX_RT_SIGTRAMP_INSN1, 0x80 /* int $0x80 */ }; #define LINUX_RT_SIGTRAMP_LEN (sizeof linux_rt_sigtramp_code) /* If PC is in a RT sigtramp routine, return the address of the start of the routine. Otherwise, return 0. */ static CORE_ADDR i386_linux_rt_sigtramp_start (CORE_ADDR pc) { unsigned char buf[LINUX_RT_SIGTRAMP_LEN]; /* We only recognize a signal trampoline if PC is at the start of one of the two instructions. We optimize for finding the PC at the start, as will be the case when the trampoline is not the first frame on the stack. We assume that in the case where the PC is not at the start of the instruction sequence, there will be a few trailing readable bytes on the stack. */ if (read_memory_nobpt (pc, (char *) buf, LINUX_RT_SIGTRAMP_LEN) != 0) return 0; if (buf[0] != LINUX_RT_SIGTRAMP_INSN0) { if (buf[0] != LINUX_RT_SIGTRAMP_INSN1) return 0; pc -= LINUX_RT_SIGTRAMP_OFFSET1; if (read_memory_nobpt (pc, (char *) buf, LINUX_RT_SIGTRAMP_LEN) != 0) return 0; } if (memcmp (buf, linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN) != 0) return 0; return pc; } /* Return whether PC is in a Linux sigtramp routine. */ int i386_linux_in_sigtramp (CORE_ADDR pc, char *name) { if (name) return STREQ ("__restore", name) || STREQ ("__restore_rt", name); return (i386_linux_sigtramp_start (pc) != 0 || i386_linux_rt_sigtramp_start (pc) != 0); } /* Assuming FRAME is for a Linux sigtramp routine, return the address of the associated sigcontext structure. */ CORE_ADDR i386_linux_sigcontext_addr (struct frame_info *frame) { CORE_ADDR pc; pc = i386_linux_sigtramp_start (frame->pc); if (pc) { CORE_ADDR sp; if (frame->next) /* If this isn't the top frame, the next frame must be for the signal handler itself. The sigcontext structure lives on the stack, right after the signum argument. */ return frame->next->frame + 12; /* This is the top frame. We'll have to find the address of the sigcontext structure by looking at the stack pointer. Keep in mind that the first instruction of the sigtramp code is "pop %eax". If the PC is at this instruction, adjust the returned value accordingly. */ sp = read_register (SP_REGNUM); if (pc == frame->pc) return sp + 4; return sp; } pc = i386_linux_rt_sigtramp_start (frame->pc); if (pc) { if (frame->next) /* If this isn't the top frame, the next frame must be for the signal handler itself. The sigcontext structure is part of the user context. A pointer to the user context is passed as the third argument to the signal handler. */ return read_memory_integer (frame->next->frame + 16, 4) + 20; /* This is the top frame. Again, use the stack pointer to find the address of the sigcontext structure. */ return read_memory_integer (read_register (SP_REGNUM) + 8, 4) + 20; } error ("Couldn't recognize signal trampoline."); return 0; } /* Offset to saved PC in sigcontext, from <asm/sigcontext.h>. */ #define LINUX_SIGCONTEXT_PC_OFFSET (56) /* Assuming FRAME is for a Linux sigtramp routine, return the saved program counter. */ static CORE_ADDR i386_linux_sigtramp_saved_pc (struct frame_info *frame) { CORE_ADDR addr; addr = i386_linux_sigcontext_addr (frame); return read_memory_integer (addr + LINUX_SIGCONTEXT_PC_OFFSET, 4); } /* Offset to saved SP in sigcontext, from <asm/sigcontext.h>. */ #define LINUX_SIGCONTEXT_SP_OFFSET (28) /* Assuming FRAME is for a Linux sigtramp routine, return the saved stack pointer. */ static CORE_ADDR i386_linux_sigtramp_saved_sp (struct frame_info *frame) { CORE_ADDR addr; addr = i386_linux_sigcontext_addr (frame); return read_memory_integer (addr + LINUX_SIGCONTEXT_SP_OFFSET, 4); } /* Signal trampolines don't have a meaningful frame. As in "i386/tm-i386.h", the frame pointer value we use is actually the frame pointer of the calling frame -- that is, the frame which was in progress when the signal trampoline was entered. GDB mostly treats this frame pointer value as a magic cookie. We detect the case of a signal trampoline by looking at the SIGNAL_HANDLER_CALLER field, which is set based on IN_SIGTRAMP. When a signal trampoline is invoked from a frameless function, we essentially have two frameless functions in a row. In this case, we use the same magic cookie for three frames in a row. We detect this case by seeing whether the next frame has SIGNAL_HANDLER_CALLER set, and, if it does, checking whether the current frame is actually frameless. In this case, we need to get the PC by looking at the SP register value stored in the signal context. This should work in most cases except in horrible situations where a signal occurs just as we enter a function but before the frame has been set up. */ #define FRAMELESS_SIGNAL(frame) \ ((frame)->next != NULL \ && (frame)->next->signal_handler_caller \ && frameless_look_for_prologue (frame)) CORE_ADDR i386_linux_frame_chain (struct frame_info *frame) { if (frame->signal_handler_caller || FRAMELESS_SIGNAL (frame)) return frame->frame; if (! inside_entry_file (frame->pc)) return read_memory_unsigned_integer (frame->frame, 4); return 0; } /* Return the saved program counter for FRAME. */ CORE_ADDR i386_linux_frame_saved_pc (struct frame_info *frame) { if (frame->signal_handler_caller) return i386_linux_sigtramp_saved_pc (frame); if (FRAMELESS_SIGNAL (frame)) { CORE_ADDR sp = i386_linux_sigtramp_saved_sp (frame->next); return read_memory_unsigned_integer (sp, 4); } return read_memory_unsigned_integer (frame->frame + 4, 4); } /* Immediately after a function call, return the saved pc. */ CORE_ADDR i386_linux_saved_pc_after_call (struct frame_info *frame) { if (frame->signal_handler_caller) return i386_linux_sigtramp_saved_pc (frame); return read_memory_unsigned_integer (read_register (SP_REGNUM), 4); } /* Calling functions in shared libraries. */ /* Find the minimal symbol named NAME, and return both the minsym struct and its objfile. This probably ought to be in minsym.c, but everything there is trying to deal with things like C++ and SOFUN_ADDRESS_MAYBE_TURQUOISE, ... Since this is so simple, it may be considered too special-purpose for general consumption. */ static struct minimal_symbol * find_minsym_and_objfile (char *name, struct objfile **objfile_p) { struct objfile *objfile; ALL_OBJFILES (objfile) { struct minimal_symbol *msym; ALL_OBJFILE_MSYMBOLS (objfile, msym) { if (SYMBOL_NAME (msym) && STREQ (SYMBOL_NAME (msym), name)) { *objfile_p = objfile; return msym; } } } return 0; } static CORE_ADDR skip_hurd_resolver (CORE_ADDR pc) { /* The HURD dynamic linker is part of the GNU C library, so many GNU/Linux distributions use it. (All ELF versions, as far as I know.) An unresolved PLT entry points to "_dl_runtime_resolve", which calls "fixup" to patch the PLT, and then passes control to the function. We look for the symbol `_dl_runtime_resolve', and find `fixup' in the same objfile. If we are at the entry point of `fixup', then we set a breakpoint at the return address (at the top of the stack), and continue. It's kind of gross to do all these checks every time we're called, since they don't change once the executable has gotten started. But this is only a temporary hack --- upcoming versions of Linux will provide a portable, efficient interface for debugging programs that use shared libraries. */ struct objfile *objfile; struct minimal_symbol *resolver = find_minsym_and_objfile ("_dl_runtime_resolve", &objfile); if (resolver) { struct minimal_symbol *fixup = lookup_minimal_symbol ("fixup", 0, objfile); if (fixup && SYMBOL_VALUE_ADDRESS (fixup) == pc) return (SAVED_PC_AFTER_CALL (get_current_frame ())); } return 0; } /* See the comments for SKIP_SOLIB_RESOLVER at the top of infrun.c. This function: 1) decides whether a PLT has sent us into the linker to resolve a function reference, and 2) if so, tells us where to set a temporary breakpoint that will trigger when the dynamic linker is done. */ CORE_ADDR i386_linux_skip_solib_resolver (CORE_ADDR pc) { CORE_ADDR result; /* Plug in functions for other kinds of resolvers here. */ result = skip_hurd_resolver (pc); if (result) return result; return 0; } /* Fetch (and possibly build) an appropriate link_map_offsets structure for native Linux/x86 targets using the struct offsets defined in link.h (but without actual reference to that file). This makes it possible to access Linux/x86 shared libraries from a GDB that was not built on an Linux/x86 host (for cross debugging). */ struct link_map_offsets * i386_linux_svr4_fetch_link_map_offsets (void) { static struct link_map_offsets lmo; static struct link_map_offsets *lmp = NULL; if (lmp == NULL) { lmp = &lmo; lmo.r_debug_size = 8; /* The actual size is 20 bytes, but this is all we need. */ lmo.r_map_offset = 4; lmo.r_map_size = 4; lmo.link_map_size = 20; /* The actual size is 552 bytes, but this is all we need. */ lmo.l_addr_offset = 0; lmo.l_addr_size = 4; lmo.l_name_offset = 4; lmo.l_name_size = 4; lmo.l_next_offset = 12; lmo.l_next_size = 4; lmo.l_prev_offset = 16; lmo.l_prev_size = 4; } return lmp; }