URL
https://opencores.org/ocsvn/or1k_old/or1k_old/trunk
Subversion Repositories or1k_old
[/] [or1k_old/] [trunk/] [gdb-5.3/] [opcodes/] [configure.in] - Rev 1181
Go to most recent revision | Compare with Previous | Blame | View Log
dnl Process this file with autoconf to produce a configure script.
dnl
AC_PREREQ(2.13)
AC_INIT(z8k-dis.c)
AC_CANONICAL_SYSTEM
AC_ISC_POSIX
# We currently only use the version number for the name of any shared
# library. For user convenience, we always use the same version
# number that BFD is using.
changequote(,)dnl
BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
changequote([,])dnl
AM_INIT_AUTOMAKE(opcodes, ${BFD_VERSION})
dnl These must be called before AM_PROG_LIBTOOL, because it may want
dnl to call AC_CHECK_PROG.
AC_CHECK_TOOL(AR, ar)
AC_CHECK_TOOL(RANLIB, ranlib, :)
dnl Default to a non shared library. This may be overridden by the
dnl configure option --enable-shared.
AM_DISABLE_SHARED
AM_PROG_LIBTOOL
AC_ARG_ENABLE(targets,
[ --enable-targets alternative target configurations],
[case "${enableval}" in
yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
;;
no) enable_targets= ;;
*) enable_targets=$enableval ;;
esac])dnl
AC_ARG_ENABLE(commonbfdlib,
[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
[case "${enableval}" in
yes) commonbfdlib=true ;;
no) commonbfdlib=false ;;
*) AC_MSG_ERROR([bad value ${enableval} for opcodes commonbfdlib option]) ;;
esac])dnl
build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
AC_ARG_ENABLE(build-warnings,
[ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
[case "${enableval}" in
yes) ;;
no) build_warnings="-w";;
,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
build_warnings="${build_warnings} ${t}";;
*,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
build_warnings="${t} ${build_warnings}";;
*) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
echo "Setting warning flags = $build_warnings" 6>&1
fi])dnl
WARN_CFLAGS=""
if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
WARN_CFLAGS="${build_warnings}"
fi
AC_SUBST(WARN_CFLAGS)
AM_CONFIG_HEADER(config.h:config.in)
if test -z "$target" ; then
AC_MSG_ERROR(Unrecognized target system type; please check config.sub.)
fi
AM_MAINTAINER_MODE
AM_INSTALL_LIBBFD
AC_EXEEXT
# host-specific stuff:
AC_PROG_CC
ALL_LINGUAS="fr sv tr es da de id pt_BR"
CY_GNU_GETTEXT
. ${srcdir}/../bfd/configure.host
BFD_CC_FOR_BUILD
AC_SUBST(HDEFINES)
AC_PROG_INSTALL
AC_CHECK_HEADERS(string.h strings.h stdlib.h)
cgen_maint=no
cgendir='$(srcdir)/../cgen'
AC_ARG_ENABLE(cgen-maint,
[ --enable-cgen-maint[=dir] build cgen generated files],
[case "${enableval}" in
yes) cgen_maint=yes ;;
no) cgen_maint=no ;;
*)
# argument is cgen install directory (not implemented yet).
# Having a `share' directory might be more appropriate for the .scm,
# .cpu, etc. files.
cgen_maint=yes
cgendir=${cgen_maint}/lib/cgen
;;
esac])dnl
AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} = xyes)
AC_SUBST(cgendir)
using_cgen=no
# Horrible hacks to build DLLs on Windows.
WIN32LDFLAGS=
WIN32LIBADD=
case "${host}" in
*-*-cygwin*)
if test "$enable_shared" = "yes"; then
WIN32LDFLAGS="-no-undefined"
WIN32LIBADD="-L`pwd`/../bfd -lbfd -L`pwd`/../libiberty -liberty -L`pwd`/../intl -lintl -lcygwin"
fi
;;
esac
AC_SUBST(WIN32LDFLAGS)
AC_SUBST(WIN32LIBADD)
# target-specific stuff:
# Canonicalize the secondary target names.
if test -n "$enable_targets" ; then
for targ in `echo $enable_targets | sed 's/,/ /g'`
do
result=`$ac_config_sub $targ 2>/dev/null`
if test -n "$result" ; then
canon_targets="$canon_targets $result"
else
# Allow targets that config.sub doesn't recognize, like "all".
canon_targets="$canon_targets $targ"
fi
done
fi
all_targets=false
selarchs=
for targ in $target $canon_targets
do
if test "x$targ" = "xall" ; then
all_targets=true
else
. $srcdir/../bfd/config.bfd
selarchs="$selarchs $targ_archs"
fi
done
# Utility var, documents generic cgen support files.
cgen_files="cgen-opc.lo cgen-asm.lo cgen-dis.lo"
# We don't do any links based on the target system, just makefile config.
if test x${all_targets} = xfalse ; then
# Target architecture .o files.
ta=
for arch in $selarchs
do
ad=`echo $arch | sed -e s/bfd_//g -e s/_arch//g`
archdefs="$archdefs -DARCH_$ad"
case "$arch" in
bfd_a29k_arch) ta="$ta a29k-dis.lo" ;;
bfd_alliant_arch) ;;
bfd_alpha_arch) ta="$ta alpha-dis.lo alpha-opc.lo" ;;
bfd_arc_arch) ta="$ta arc-dis.lo arc-opc.lo arc-ext.lo" ;;
bfd_arm_arch) ta="$ta arm-dis.lo" ;;
bfd_avr_arch) ta="$ta avr-dis.lo" ;;
bfd_convex_arch) ;;
bfd_cris_arch) ta="$ta cris-dis.lo cris-opc.lo" ;;
bfd_d10v_arch) ta="$ta d10v-dis.lo d10v-opc.lo" ;;
bfd_d30v_arch) ta="$ta d30v-dis.lo d30v-opc.lo" ;;
bfd_dlx_arch) ta="$ta dlx-dis.lo" ;;
bfd_fr30_arch) ta="$ta fr30-asm.lo fr30-desc.lo fr30-dis.lo fr30-ibld.lo fr30-opc.lo" using_cgen=yes ;;
bfd_h8300_arch) ta="$ta h8300-dis.lo" ;;
bfd_h8500_arch) ta="$ta h8500-dis.lo" ;;
bfd_hppa_arch) ta="$ta hppa-dis.lo" ;;
bfd_i370_arch) ta="$ta i370-dis.lo i370-opc.lo" ;;
bfd_i386_arch) ta="$ta i386-dis.lo" ;;
bfd_i860_arch) ta="$ta i860-dis.lo" ;;
bfd_i960_arch) ta="$ta i960-dis.lo" ;;
bfd_ia64_arch) ta="$ta ia64-dis.lo ia64-opc.lo" ;;
bfd_ip2k_arch) ta="$ta ip2k-asm.lo ip2k-desc.lo ip2k-dis.lo ip2k-ibld.lo ip2k-opc.lo" using_cgen=yes ;;
bfd_m32r_arch) ta="$ta m32r-asm.lo m32r-desc.lo m32r-dis.lo m32r-ibld.lo m32r-opc.lo m32r-opinst.lo" using_cgen=yes ;;
bfd_m68hc11_arch) ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;;
bfd_m68hc12_arch) ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;;
bfd_m68k_arch) ta="$ta m68k-dis.lo m68k-opc.lo" ;;
bfd_m88k_arch) ta="$ta m88k-dis.lo" ;;
bfd_mcore_arch) ta="$ta mcore-dis.lo" ;;
bfd_mips_arch) ta="$ta mips-dis.lo mips-opc.lo mips16-opc.lo" ;;
bfd_mmix_arch) ta="$ta mmix-dis.lo mmix-opc.lo" ;;
bfd_mn10200_arch) ta="$ta m10200-dis.lo m10200-opc.lo" ;;
bfd_mn10300_arch) ta="$ta m10300-dis.lo m10300-opc.lo" ;;
bfd_ns32k_arch) ta="$ta ns32k-dis.lo" ;;
bfd_openrisc_arch) ta="$ta openrisc-asm.lo openrisc-desc.lo openrisc-dis.lo openrisc-ibld.lo openrisc-opc.lo" using_cgen=yes ;;
bfd_or32_arch) ta="$ta or32-dis.lo or32-opc.lo" using_cgen=yes ;;
bfd_pdp11_arch) ta="$ta pdp11-dis.lo pdp11-opc.lo" ;;
bfd_pj_arch) ta="$ta pj-dis.lo pj-opc.lo" ;;
bfd_powerpc_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;;
bfd_powerpc_64_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;;
bfd_pyramid_arch) ;;
bfd_romp_arch) ;;
bfd_rs6000_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;;
bfd_s390_arch) ta="$ta s390-dis.lo s390-opc.lo" ;;
bfd_sh_arch)
# We can't decide what we want just from the CPU family.
# We want SH5 support unless a specific version of sh is
# specified, as in sh3-elf, sh3b-linux-gnu, etc.
# Include it just for ELF targets, since the SH5 bfd:s are ELF only.
for t in $target $canon_targets; do
case $t in
all | sh5*-* | sh64*-* | sh-*-*elf* | shl*-*-*elf* | \
sh-*-linux* | shl-*-linux*)
ta="$ta sh64-dis.lo sh64-opc.lo"
archdefs="$archdefs -DINCLUDE_SHMEDIA"
break;;
esac;
done
ta="$ta sh-dis.lo" ;;
bfd_sparc_arch) ta="$ta sparc-dis.lo sparc-opc.lo" ;;
bfd_tahoe_arch) ;;
bfd_tic30_arch) ta="$ta tic30-dis.lo" ;;
bfd_tic4x_arch) ta="$ta tic4x-dis.lo" ;;
bfd_tic54x_arch) ta="$ta tic54x-dis.lo tic54x-opc.lo" ;;
bfd_tic80_arch) ta="$ta tic80-dis.lo tic80-opc.lo" ;;
bfd_v850_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
bfd_v850e_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
bfd_v850ea_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
bfd_vax_arch) ta="$ta vax-dis.lo" ;;
bfd_w65_arch) ta="$ta w65-dis.lo" ;;
bfd_we32k_arch) ;;
bfd_xstormy16_arch) ta="$ta xstormy16-asm.lo xstormy16-desc.lo xstormy16-dis.lo xstormy16-ibld.lo xstormy16-opc.lo" using_cgen=yes ;;
bfd_z8k_arch) ta="$ta z8k-dis.lo" ;;
bfd_frv_arch) ta="$ta frv-asm.lo frv-desc.lo frv-dis.lo frv-ibld.lo frv-opc.lo" using_cgen=yes ;;
"") ;;
*) AC_MSG_ERROR(*** unknown target architecture $arch) ;;
esac
done
if test $using_cgen = yes ; then
ta="$ta $cgen_files"
fi
# Weed out duplicate .o files.
f=""
for i in $ta ; do
case " $f " in
*" $i "*) ;;
*) f="$f $i" ;;
esac
done
ta="$f"
# And duplicate -D flags.
f=""
for i in $archdefs ; do
case " $f " in
*" $i "*) ;;
*) f="$f $i" ;;
esac
done
archdefs="$f"
BFD_MACHINES="$ta"
else # all_targets is true
archdefs=-DARCH_all
BFD_MACHINES='$(ALL_MACHINES)'
fi
AC_SUBST(archdefs)
AC_SUBST(BFD_MACHINES)
AC_OUTPUT(Makefile po/Makefile.in:po/Make-in,
[sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile])
Go to most recent revision | Compare with Previous | Blame | View Log