URL
https://opencores.org/ocsvn/or1k_old/or1k_old/trunk
Subversion Repositories or1k_old
[/] [or1k_old/] [trunk/] [insight/] [tk/] [mac/] [tkMacSend.c] - Rev 1765
Go to most recent revision | Compare with Previous | Blame | View Log
/* * tkMacSend.c -- * * This file provides procedures that implement the "send" * command, allowing commands to be passed from interpreter * to interpreter. This current implementation for the Mac * has most functionality stubed out. * * Copyright (c) 1989-1994 The Regents of the University of California. * Copyright (c) 1994-1996 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tkMacSend.c,v 1.1.1.1 2002-01-16 10:25:57 markom Exp $ */ #include "tkPort.h" #include "tkInt.h" /* * The following structure is used to keep track of the * interpreters registered by this process. */ typedef struct RegisteredInterp { char *name; /* Interpreter's name (malloc-ed). */ Tcl_Interp *interp; /* Interpreter associated with * name. */ TkWindow *winPtr; /* Main window for the application. */ struct RegisteredInterp *nextPtr; /* Next in list of names associated * with interps in this process. * NULL means end of list. */ } RegisteredInterp; static RegisteredInterp *registry = NULL; /* List of all interpreters * registered by this process. */ /* * A registry of all interpreters for a display is kept in a * property "InterpRegistry" on the root window of the display. * It is organized as a series of zero or more concatenated strings * (in no particular order), each of the form * window space name '\0' * where "window" is the hex id of the comm. window to use to talk * to an interpreter named "name". * * When the registry is being manipulated by an application (e.g. to * add or remove an entry), it is loaded into memory using a structure * of the following type: */ typedef struct NameRegistry { TkDisplay *dispPtr; /* Display from which the registry was * read. */ int locked; /* Non-zero means that the display was * locked when the property was read in. */ int modified; /* Non-zero means that the property has * been modified, so it needs to be written * out when the NameRegistry is closed. */ unsigned long propLength; /* Length of the property, in bytes. */ char *property; /* The contents of the property. See format * above; this is *not* terminated by the * first null character. Dynamically * allocated. */ int allocedByX; /* Non-zero means must free property with * XFree; zero means use ckfree. */ } NameRegistry; /* * When a result is being awaited from a sent command, one of * the following structures is present on a list of all outstanding * sent commands. The information in the structure is used to * process the result when it arrives. You're probably wondering * how there could ever be multiple outstanding sent commands. * This could happen if interpreters invoke each other recursively. * It's unlikely, but possible. */ typedef struct PendingCommand { int serial; /* Serial number expected in * result. */ TkDisplay *dispPtr; /* Display being used for communication. */ char *target; /* Name of interpreter command is * being sent to. */ Window commWindow; /* Target's communication window. */ Tk_TimerToken timeout; /* Token for timer handler used to check * up on target during long sends. */ Tcl_Interp *interp; /* Interpreter from which the send * was invoked. */ int code; /* Tcl return code for command * will be stored here. */ char *result; /* String result for command (malloc'ed), * or NULL. */ char *errorInfo; /* Information for "errorInfo" variable, * or NULL (malloc'ed). */ char *errorCode; /* Information for "errorCode" variable, * or NULL (malloc'ed). */ int gotResponse; /* 1 means a response has been received, * 0 means the command is still outstanding. */ struct PendingCommand *nextPtr; /* Next in list of all outstanding * commands. NULL means end of * list. */ } PendingCommand; static PendingCommand *pendingCommands = NULL; /* List of all commands currently * being waited for. */ /* * The information below is used for communication between processes * during "send" commands. Each process keeps a private window, never * even mapped, with one property, "Comm". When a command is sent to * an interpreter, the command is appended to the comm property of the * communication window associated with the interp's process. Similarly, * when a result is returned from a sent command, it is also appended * to the comm property. * * Each command and each result takes the form of ASCII text. For a * command, the text consists of a zero character followed by several * null-terminated ASCII strings. The first string consists of the * single letter "c". Subsequent strings have the form "option value" * where the following options are supported: * * -r commWindow serial * * This option means that a response should be sent to the window * whose X identifier is "commWindow" (in hex), and the response should * be identified with the serial number given by "serial" (in decimal). * If this option isn't specified then the send is asynchronous and * no response is sent. * * -n name * "Name" gives the name of the application for which the command is * intended. This option must be present. * * -s script * * "Script" is the script to be executed. This option must be present. * * The options may appear in any order. The -n and -s options must be * present, but -r may be omitted for asynchronous RPCs. For compatibility * with future releases that may add new features, there may be additional * options present; as long as they start with a "-" character, they will * be ignored. * * A result also consists of a zero character followed by several null- * terminated ASCII strings. The first string consists of the single * letter "r". Subsequent strings have the form "option value" where * the following options are supported: * * -s serial * * Identifies the command for which this is the result. It is the * same as the "serial" field from the -s option in the command. This * option must be present. * * -c code * * "Code" is the completion code for the script, in decimal. If the * code is omitted it defaults to TCL_OK. * * -r result * * "Result" is the result string for the script, which may be either * a result or an error message. If this field is omitted then it * defaults to an empty string. * * -i errorInfo * * "ErrorInfo" gives a string with which to initialize the errorInfo * variable. This option may be omitted; it is ignored unless the * completion code is TCL_ERROR. * * -e errorCode * * "ErrorCode" gives a string with with to initialize the errorCode * variable. This option may be omitted; it is ignored unless the * completion code is TCL_ERROR. * * Options may appear in any order, and only the -s option must be * present. As with commands, there may be additional options besides * these; unknown options are ignored. */ /* * The following variable is the serial number that was used in the * last "send" command. It is exported only for testing purposes. */ int tkSendSerial = 0; /* * Maximum size property that can be read at one time by * this module: */ #define MAX_PROP_WORDS 100000 /* * Forward declarations for procedures defined later in this file: */ static int AppendErrorProc _ANSI_ARGS_((ClientData clientData, XErrorEvent *errorPtr)); static void AppendPropCarefully _ANSI_ARGS_((Display *display, Window window, Atom property, char *value, int length, PendingCommand *pendingPtr)); static void DeleteProc _ANSI_ARGS_((ClientData clientData)); static void RegAddName _ANSI_ARGS_((NameRegistry *regPtr, char *name, Window commWindow)); static void RegClose _ANSI_ARGS_((NameRegistry *regPtr)); static void RegDeleteName _ANSI_ARGS_((NameRegistry *regPtr, char *name)); static Window RegFindName _ANSI_ARGS_((NameRegistry *regPtr, char *name)); static NameRegistry * RegOpen _ANSI_ARGS_((Tcl_Interp *interp, TkWindow *winPtr, int lock)); static void SendEventProc _ANSI_ARGS_((ClientData clientData, XEvent *eventPtr)); static int SendInit _ANSI_ARGS_((Tcl_Interp *interp, TkWindow *winPtr)); static Bool SendRestrictProc _ANSI_ARGS_((Display *display, XEvent *eventPtr, char *arg)); static int ServerSecure _ANSI_ARGS_((TkDisplay *dispPtr)); static void TimeoutProc _ANSI_ARGS_((ClientData clientData)); static int ValidateName _ANSI_ARGS_((TkDisplay *dispPtr, char *name, Window commWindow, int oldOK)); /* *-------------------------------------------------------------- * * Tk_SetAppName -- * * This procedure is called to associate an ASCII name with a Tk * application. If the application has already been named, the * name replaces the old one. * * Results: * The return value is the name actually given to the application. * This will normally be the same as name, but if name was already * in use for an application then a name of the form "name #2" will * be chosen, with a high enough number to make the name unique. * * Side effects: * Registration info is saved, thereby allowing the "send" command * to be used later to invoke commands in the application. In * addition, the "send" command is created in the application's * interpreter. The registration will be removed automatically * if the interpreter is deleted or the "send" command is removed. * *-------------------------------------------------------------- */ char * Tk_SetAppName( Tk_Window tkwin, /* Token for any window in the application * to be named: it is just used to identify * the application and the display. */ char *name) /* The name that will be used to * refer to the interpreter in later * "send" commands. Must be globally * unique. */ { return name; } /* *-------------------------------------------------------------- * * Tk_SendCmd -- * * This procedure is invoked to process the "send" Tcl command. * See the user documentation for details on what it does. * * Results: * A standard Tcl result. * * Side effects: * See the user documentation. * *-------------------------------------------------------------- */ int Tk_SendCmd( ClientData clientData, /* Information about sender (only * dispPtr field is used). */ Tcl_Interp *interp, /* Current interpreter. */ int argc, /* Number of arguments. */ char **argv) /* Argument strings. */ { Tcl_SetResult(interp, "Send not yet implemented", TCL_STATIC); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * TkGetInterpNames -- * * This procedure is invoked to fetch a list of all the * interpreter names currently registered for the display * of a particular window. * * Results: * A standard Tcl return value. Interp->result will be set * to hold a list of all the interpreter names defined for * tkwin's display. If an error occurs, then TCL_ERROR * is returned and interp->result will hold an error message. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TkGetInterpNames( Tcl_Interp *interp, /* Interpreter for returning a result. */ Tk_Window tkwin) /* Window whose display is to be used * for the lookup. */ { Tcl_SetResult(interp, "Send not yet implemented", TCL_STATIC); return TCL_ERROR; } /* *-------------------------------------------------------------- * * SendInit -- * * This procedure is called to initialize the * communication channels for sending commands and * receiving results. * * Results: * None. * * Side effects: * Sets up various data structures and windows. * *-------------------------------------------------------------- */ static int SendInit( Tcl_Interp *interp, /* Interpreter to use for error reporting * (no errors are ever returned, but the * interpreter is needed anyway). */ TkWindow *winPtr) /* Window that identifies the display to * initialize. */ { return TCL_OK; }
Go to most recent revision | Compare with Previous | Blame | View Log