URL
https://opencores.org/ocsvn/or1k_old/or1k_old/trunk
Subversion Repositories or1k_old
[/] [or1k_old/] [trunk/] [insight/] [tk/] [unix/] [tkUnixCursor.c] - Rev 1782
Compare with Previous | Blame | View Log
/* * tkUnixCursor.c -- * * This file contains X specific cursor manipulation routines. * * Copyright (c) 1995 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tkUnixCursor.c,v 1.1.1.1 2002-01-16 10:26:01 markom Exp $ */ #include "tkPort.h" #include "tkInt.h" /* * The following data structure is a superset of the TkCursor structure * defined in tkCursor.c. Each system specific cursor module will define * a different cursor structure. All of these structures must have the * same header consisting of the fields in TkCursor. */ typedef struct { TkCursor info; /* Generic cursor info used by tkCursor.c */ Display *display; /* Display for which cursor is valid. */ } TkUnixCursor; /* * The table below is used to map from the name of a cursor to its * index in the official cursor font: */ static struct CursorName { char *name; unsigned int shape; } cursorNames[] = { {"X_cursor", XC_X_cursor}, {"arrow", XC_arrow}, {"based_arrow_down", XC_based_arrow_down}, {"based_arrow_up", XC_based_arrow_up}, {"boat", XC_boat}, {"bogosity", XC_bogosity}, {"bottom_left_corner", XC_bottom_left_corner}, {"bottom_right_corner", XC_bottom_right_corner}, {"bottom_side", XC_bottom_side}, {"bottom_tee", XC_bottom_tee}, {"box_spiral", XC_box_spiral}, {"center_ptr", XC_center_ptr}, {"circle", XC_circle}, {"clock", XC_clock}, {"coffee_mug", XC_coffee_mug}, {"cross", XC_cross}, {"cross_reverse", XC_cross_reverse}, {"crosshair", XC_crosshair}, {"diamond_cross", XC_diamond_cross}, {"dot", XC_dot}, {"dotbox", XC_dotbox}, {"double_arrow", XC_double_arrow}, {"draft_large", XC_draft_large}, {"draft_small", XC_draft_small}, {"draped_box", XC_draped_box}, {"exchange", XC_exchange}, {"fleur", XC_fleur}, {"gobbler", XC_gobbler}, {"gumby", XC_gumby}, {"hand1", XC_hand1}, {"hand2", XC_hand2}, {"heart", XC_heart}, {"icon", XC_icon}, {"iron_cross", XC_iron_cross}, {"left_ptr", XC_left_ptr}, {"left_side", XC_left_side}, {"left_tee", XC_left_tee}, {"leftbutton", XC_leftbutton}, {"ll_angle", XC_ll_angle}, {"lr_angle", XC_lr_angle}, {"man", XC_man}, {"middlebutton", XC_middlebutton}, {"mouse", XC_mouse}, {"pencil", XC_pencil}, {"pirate", XC_pirate}, {"plus", XC_plus}, {"question_arrow", XC_question_arrow}, {"right_ptr", XC_right_ptr}, {"right_side", XC_right_side}, {"right_tee", XC_right_tee}, {"rightbutton", XC_rightbutton}, {"rtl_logo", XC_rtl_logo}, {"sailboat", XC_sailboat}, {"sb_down_arrow", XC_sb_down_arrow}, {"sb_h_double_arrow", XC_sb_h_double_arrow}, {"sb_left_arrow", XC_sb_left_arrow}, {"sb_right_arrow", XC_sb_right_arrow}, {"sb_up_arrow", XC_sb_up_arrow}, {"sb_v_double_arrow", XC_sb_v_double_arrow}, {"shuttle", XC_shuttle}, {"sizing", XC_sizing}, {"spider", XC_spider}, {"spraycan", XC_spraycan}, {"star", XC_star}, {"target", XC_target}, {"tcross", XC_tcross}, {"top_left_arrow", XC_top_left_arrow}, {"top_left_corner", XC_top_left_corner}, {"top_right_corner", XC_top_right_corner}, {"top_side", XC_top_side}, {"top_tee", XC_top_tee}, {"trek", XC_trek}, {"ul_angle", XC_ul_angle}, {"umbrella", XC_umbrella}, {"ur_angle", XC_ur_angle}, {"watch", XC_watch}, {"xterm", XC_xterm}, {NULL, 0} }; /* * Font to use for cursors: */ #ifndef CURSORFONT #define CURSORFONT "cursor" #endif /* *---------------------------------------------------------------------- * * TkGetCursorByName -- * * Retrieve a cursor by name. Parse the cursor name into fields * and create a cursor, either from the standard cursor font or * from bitmap files. * * Results: * Returns a new cursor, or NULL on errors. * * Side effects: * Allocates a new cursor. * *---------------------------------------------------------------------- */ TkCursor * TkGetCursorByName(interp, tkwin, string) Tcl_Interp *interp; /* Interpreter to use for error reporting. */ Tk_Window tkwin; /* Window in which cursor will be used. */ Tk_Uid string; /* Description of cursor. See manual entry * for details on legal syntax. */ { TkUnixCursor *cursorPtr = NULL; Cursor cursor = None; int argc; char **argv = NULL; Pixmap source = None; Pixmap mask = None; Display *display = Tk_Display(tkwin); if (Tcl_SplitList(interp, string, &argc, &argv) != TCL_OK) { return NULL; } if (argc == 0) { goto badString; } if (argv[0][0] != '@') { XColor fg, bg; unsigned int maskIndex; register struct CursorName *namePtr; TkDisplay *dispPtr; /* * The cursor is to come from the standard cursor font. If one * arg, it is cursor name (use black and white for fg and bg). * If two args, they are name and fg color (ignore mask). If * three args, they are name, fg, bg. Some of the code below * is stolen from the XCreateFontCursor Xlib procedure. */ if (argc > 3) { goto badString; } for (namePtr = cursorNames; ; namePtr++) { if (namePtr->name == NULL) { goto badString; } if ((namePtr->name[0] == argv[0][0]) && (strcmp(namePtr->name, argv[0]) == 0)) { break; } } maskIndex = namePtr->shape + 1; if (argc == 1) { fg.red = fg.green = fg.blue = 0; bg.red = bg.green = bg.blue = 65535; } else { if (XParseColor(display, Tk_Colormap(tkwin), argv[1], &fg) == 0) { Tcl_AppendResult(interp, "invalid color name \"", argv[1], "\"", (char *) NULL); goto cleanup; } if (argc == 2) { bg.red = bg.green = bg.blue = 0; maskIndex = namePtr->shape; } else { if (XParseColor(display, Tk_Colormap(tkwin), argv[2], &bg) == 0) { Tcl_AppendResult(interp, "invalid color name \"", argv[2], "\"", (char *) NULL); goto cleanup; } } } dispPtr = ((TkWindow *) tkwin)->dispPtr; if (dispPtr->cursorFont == None) { dispPtr->cursorFont = XLoadFont(display, CURSORFONT); if (dispPtr->cursorFont == None) { interp->result = "couldn't load cursor font"; goto cleanup; } } cursor = XCreateGlyphCursor(display, dispPtr->cursorFont, dispPtr->cursorFont, namePtr->shape, maskIndex, &fg, &bg); } else { int width, height, maskWidth, maskHeight; int xHot, yHot, dummy1, dummy2; XColor fg, bg; /* * Prevent file system access in safe interpreters. */ if (Tcl_IsSafe(interp)) { Tcl_AppendResult(interp, "can't get cursor from a file in", " a safe interpreter", (char *) NULL); cursorPtr = NULL; goto cleanup; } /* * The cursor is to be created by reading bitmap files. There * should be either two elements in the list (source, color) or * four (source mask fg bg). */ if ((argc != 2) && (argc != 4)) { goto badString; } if (TkReadBitmapFile(display, RootWindowOfScreen(Tk_Screen(tkwin)), &argv[0][1], (unsigned int *) &width, (unsigned int *) &height, &source, &xHot, &yHot) != BitmapSuccess) { Tcl_AppendResult(interp, "cleanup reading bitmap file \"", &argv[0][1], "\"", (char *) NULL); goto cleanup; } if ((xHot < 0) || (yHot < 0) || (xHot >= width) || (yHot >= height)) { Tcl_AppendResult(interp, "bad hot spot in bitmap file \"", &argv[0][1], "\"", (char *) NULL); goto cleanup; } if (argc == 2) { if (XParseColor(display, Tk_Colormap(tkwin), argv[1], &fg) == 0) { Tcl_AppendResult(interp, "invalid color name \"", argv[1], "\"", (char *) NULL); goto cleanup; } cursor = XCreatePixmapCursor(display, source, source, &fg, &fg, (unsigned) xHot, (unsigned) yHot); } else { if (TkReadBitmapFile(display, RootWindowOfScreen(Tk_Screen(tkwin)), argv[1], (unsigned int *) &maskWidth, (unsigned int *) &maskHeight, &mask, &dummy1, &dummy2) != BitmapSuccess) { Tcl_AppendResult(interp, "cleanup reading bitmap file \"", argv[1], "\"", (char *) NULL); goto cleanup; } if ((maskWidth != width) && (maskHeight != height)) { interp->result = "source and mask bitmaps have different sizes"; goto cleanup; } if (XParseColor(display, Tk_Colormap(tkwin), argv[2], &fg) == 0) { Tcl_AppendResult(interp, "invalid color name \"", argv[2], "\"", (char *) NULL); goto cleanup; } if (XParseColor(display, Tk_Colormap(tkwin), argv[3], &bg) == 0) { Tcl_AppendResult(interp, "invalid color name \"", argv[3], "\"", (char *) NULL); goto cleanup; } cursor = XCreatePixmapCursor(display, source, mask, &fg, &bg, (unsigned) xHot, (unsigned) yHot); } } if (cursor != None) { cursorPtr = (TkUnixCursor *) ckalloc(sizeof(TkUnixCursor)); cursorPtr->info.cursor = (Tk_Cursor) cursor; cursorPtr->display = display; } cleanup: if (argv != NULL) { ckfree((char *) argv); } if (source != None) { Tk_FreePixmap(display, source); } if (mask != None) { Tk_FreePixmap(display, mask); } return (TkCursor *) cursorPtr; badString: Tcl_AppendResult(interp, "bad cursor spec \"", string, "\"", (char *) NULL); return NULL; } /* *---------------------------------------------------------------------- * * TkCreateCursorFromData -- * * Creates a cursor from the source and mask bits. * * Results: * Returns a new cursor, or NULL on errors. * * Side effects: * Allocates a new cursor. * *---------------------------------------------------------------------- */ TkCursor * TkCreateCursorFromData(tkwin, source, mask, width, height, xHot, yHot, fgColor, bgColor) Tk_Window tkwin; /* Window in which cursor will be used. */ char *source; /* Bitmap data for cursor shape. */ char *mask; /* Bitmap data for cursor mask. */ int width, height; /* Dimensions of cursor. */ int xHot, yHot; /* Location of hot-spot in cursor. */ XColor fgColor; /* Foreground color for cursor. */ XColor bgColor; /* Background color for cursor. */ { Cursor cursor; Pixmap sourcePixmap, maskPixmap; TkUnixCursor *cursorPtr = NULL; Display *display = Tk_Display(tkwin); sourcePixmap = XCreateBitmapFromData(display, RootWindowOfScreen(Tk_Screen(tkwin)), source, (unsigned) width, (unsigned) height); maskPixmap = XCreateBitmapFromData(display, RootWindowOfScreen(Tk_Screen(tkwin)), mask, (unsigned) width, (unsigned) height); cursor = XCreatePixmapCursor(display, sourcePixmap, maskPixmap, &fgColor, &bgColor, (unsigned) xHot, (unsigned) yHot); Tk_FreePixmap(display, sourcePixmap); Tk_FreePixmap(display, maskPixmap); if (cursor != None) { cursorPtr = (TkUnixCursor *) ckalloc(sizeof(TkUnixCursor)); cursorPtr->info.cursor = (Tk_Cursor) cursor; cursorPtr->display = display; } return (TkCursor *) cursorPtr; } /* *---------------------------------------------------------------------- * * TkFreeCursor -- * * This procedure is called to release a cursor allocated by * TkGetCursorByName. * * Results: * None. * * Side effects: * The cursor data structure is deallocated. * *---------------------------------------------------------------------- */ void TkFreeCursor(cursorPtr) TkCursor *cursorPtr; { TkUnixCursor *unixCursorPtr = (TkUnixCursor *) cursorPtr; XFreeCursor(unixCursorPtr->display, (Cursor) unixCursorPtr->info.cursor); Tk_FreeXId(unixCursorPtr->display, (XID) unixCursorPtr->info.cursor); ckfree((char *) unixCursorPtr); }