OpenCores
URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [or1ksim/] [peripheral/] [eth.c] - Rev 1390

Go to most recent revision | Compare with Previous | Blame | View Log

/* ethernet.c -- Simulation of Ethernet MAC
   Copyright (C) 2001 by Erez Volk, erez@opencores.org
                         Ivan Guzvinec, ivang@opencores.org
 
   This file is part of OpenRISC 1000 Architectural Simulator.
 
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.
 
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
 
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>   
#include <fcntl.h>      
#include <sys/poll.h>   
#include <sys/time.h>   
#include <unistd.h>     
#include <errno.h>
#include <netinet/in.h>
 
#include "config.h"
 
#ifdef HAVE_INTTYPES_H
#include <inttypes.h>
#endif
 
#include "port.h"
#include "arch.h"
#include "config.h"
#include "abstract.h"
#include "ethernet_i.h"
#include "dma.h"
#include "sim-config.h"
#include "fields.h"
#include "crc32.h"
#include "vapi.h"
#include "pic.h"
#include "sched.h"
#include "debug.h"
 
/* simulator interface */
static void eth_vapi_read( unsigned long id, unsigned long data, void *dat);
/* register interface */
static void eth_write32( oraddr_t addr, uint32_t value, void *dat );
static uint32_t eth_read32( oraddr_t addr, void *dat );
/* clock */
static void eth_controller_tx_clock( void * );
static void eth_controller_rx_clock( void * );
/* utility functions */
static ssize_t eth_read_rx_file( struct eth_device *, void *, size_t );
static void eth_skip_rx_file( struct eth_device *, off_t );
static void eth_rewind_rx_file( struct eth_device *, off_t );
static void eth_rx_next_packet( struct eth_device * );
static void eth_write_tx_bd_num( struct eth_device *, unsigned long value );
/* ========================================================================= */
/*  TX LOGIC                                                                 */
/*---------------------------------------------------------------------------*/
 
/*
 * TX clock
 * Responsible for starting and finishing TX
 */
void eth_controller_tx_clock( void *dat )
{
    struct eth_device *eth = dat;
    int breakpoint = 0;
    int bAdvance   = 1;
#if HAVE_ETH_PHY
    struct sockaddr_ll sll;
#endif /* HAVE_ETH_PHY */
    long nwritten;
    unsigned long read_word;
 
    switch (eth->tx.state) {
    case ETH_TXSTATE_IDLE:
	debug (3, "TX - entering state WAIT4BD (%ld)\n", eth->tx.bd_index);
        eth->tx.state = ETH_TXSTATE_WAIT4BD;
        break;
    case ETH_TXSTATE_WAIT4BD:
        /* Read buffer descriptor */
        eth->tx.bd = eth->regs.bd_ram[eth->tx.bd_index];
        eth->tx.bd_addr = eth->regs.bd_ram[eth->tx.bd_index + 1];
 
        if ( TEST_FLAG( eth->tx.bd, ETH_TX_BD, READY ) ) {
            /*****************/
            /* initialize TX */
            eth->tx.bytes_left = eth->tx.packet_length = GET_FIELD( eth->tx.bd, ETH_TX_BD, LENGTH );
            eth->tx.bytes_sent = 0;
 
            /*   Initialize error status bits */
            CLEAR_FLAG( eth->tx.bd, ETH_TX_BD, DEFER );
            CLEAR_FLAG( eth->tx.bd, ETH_TX_BD, COLLISION );
            CLEAR_FLAG( eth->tx.bd, ETH_TX_BD, RETRANSMIT );
            CLEAR_FLAG( eth->tx.bd, ETH_TX_BD, UNDERRUN );
            CLEAR_FLAG( eth->tx.bd, ETH_TX_BD, NO_CARRIER );
            SET_FIELD ( eth->tx.bd, ETH_TX_BD, RETRY, 0 );
 
            /* Find out minimum length */
            if ( TEST_FLAG( eth->tx.bd, ETH_TX_BD, PAD ) ||
                 TEST_FLAG( eth->regs.moder, ETH_MODER, PAD ) )
                eth->tx.minimum_length = GET_FIELD( eth->regs.packetlen, ETH_PACKETLEN, MINFL );
            else 
                eth->tx.minimum_length = eth->tx.packet_length;
 
            /* Find out maximum length */
            if ( TEST_FLAG( eth->regs.moder, ETH_MODER, HUGEN ) )
                eth->tx.maximum_length = eth->tx.packet_length;
            else
                eth->tx.maximum_length = GET_FIELD( eth->regs.packetlen, ETH_PACKETLEN, MAXFL );
 
            /* Do we need CRC on this packet? */
            if ( TEST_FLAG( eth->regs.moder, ETH_MODER, CRCEN ) ||
                 (TEST_FLAG( eth->tx.bd, ETH_TX_BD, CRC) &&
                  TEST_FLAG( eth->tx.bd, ETH_TX_BD, LAST)) )
                eth->tx.add_crc = 1;
            else
                eth->tx.add_crc = 0;
 
            if ( TEST_FLAG( eth->regs.moder, ETH_MODER, DLYCRCEN ) )
                eth->tx.crc_dly = 1;
            else
                eth->tx.crc_dly = 0;
            /* XXX - For now we skip CRC calculation */
 
            debug( 3, "Ethernet: Starting TX of %lu bytes (min. %u, max. %u)\n",
                   eth->tx.packet_length, eth->tx.minimum_length,
                   eth->tx.maximum_length );
 
            if (eth->rtx_type == ETH_RTX_FILE) {
                /* write packet length to file */
                nwritten = write( eth->txfd, &(eth->tx.packet_length), sizeof(eth->tx.packet_length) );
            }
 
            /************************************************/
            /* start transmit with reading packet into FIFO */
	        debug (3, "TX - entering state READFIFO\n");
            eth->tx.state = ETH_TXSTATE_READFIFO;
        }
 
        /* stay in this state if (TXEN && !READY) */
        break;
    case ETH_TXSTATE_READFIFO:
#if 1
        if ( eth->tx.bytes_sent < eth->tx.packet_length ) {
            read_word = eval_direct32(eth->tx.bytes_sent + eth->tx.bd_addr, &breakpoint, 0, 0);
            eth->tx_buff[eth->tx.bytes_sent]   = (unsigned char)(read_word >> 24);
            eth->tx_buff[eth->tx.bytes_sent+1] = (unsigned char)(read_word >> 16);
            eth->tx_buff[eth->tx.bytes_sent+2] = (unsigned char)(read_word >> 8);
            eth->tx_buff[eth->tx.bytes_sent+3] = (unsigned char)(read_word);            
            eth->tx.bytes_sent += 4;
        }
#else
        if ( eth->tx.bytes_sent < eth->tx.packet_length ) {
            eth->tx_buff[eth->tx.bytes_sent] = eval_direct8(eth->tx.bytes_sent + eth->tx.bd_addr, &breakpoint, 0, 0);
            eth->tx.bytes_sent += 1;
        }
#endif
        else {
	    debug (3, "TX - entering state TRANSMIT\n");
            eth->tx.state = ETH_TXSTATE_TRANSMIT;
        }
        break;
    case ETH_TXSTATE_TRANSMIT:
        /* send packet */
        switch (eth->rtx_type) {
        case ETH_RTX_FILE:
            nwritten = write( eth->txfd, eth->tx_buff, eth->tx.packet_length );
            break;
#if HAVE_ETH_PHY
        case ETH_RTX_SOCK:
            memset(&sll, 0, sizeof(sll));
            sll.sll_ifindex = eth->ifr.ifr_ifindex;
            nwritten = sendto(eth->rtx_sock, eth->tx_buff, eth->tx.packet_length, 0, (struct sockaddr *)&sll, sizeof(sll));
#endif /* HAVE_ETH_PHY */
        }
 
        /* set BD status */
        if (nwritten == eth->tx.packet_length) {
            CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, READY);
            SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, TXB);
	    debug (4, "ETH_INT_SOURCE = %0lx\n", eth->regs.int_source);
 
	    debug (3, "TX - entering state WAIT4BD\n");
            eth->tx.state = ETH_TXSTATE_WAIT4BD;
            debug (3, "send (%ld)bytes OK\n", nwritten);
        }
        else {
            /* XXX - implement retry mechanism here! */
            CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, READY);
            CLEAR_FLAG (eth->tx.bd, ETH_TX_BD, COLLISION);
            SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, TXE);
            debug (4, "ETH_INT_SOURCE = %0lx\n", eth->regs.int_source);
 
            debug (3, "TX - entering state WAIT4BD\n");
            eth->tx.state = ETH_TXSTATE_WAIT4BD;
            debug (3, "send FAILED!\n");
        }
 
        eth->regs.bd_ram[eth->tx.bd_index] = eth->tx.bd;
 
        /* generate OK interrupt */
        if ( TEST_FLAG(eth->regs.int_mask, ETH_INT_MASK, TXE_M) || 
             TEST_FLAG(eth->regs.int_mask, ETH_INT_MASK, TXB_M) )
        {
            if ( TEST_FLAG( eth->tx.bd, ETH_TX_BD, IRQ ) )
                report_interrupt( eth->mac_int );
        }
 
        /* advance to next BD */
        if (bAdvance) {
            if ( TEST_FLAG( eth->tx.bd, ETH_TX_BD, WRAP ) ||
                            eth->tx.bd_index >= ETH_BD_COUNT )
                eth->tx.bd_index = 0;
            else
                eth->tx.bd_index += 2;
        }
 
        break;
    }
 
    /* Reschedule */
    SCHED_ADD( eth_controller_tx_clock, dat, 1 );
}
/* ========================================================================= */
 
 
/* ========================================================================= */
/*  RX LOGIC                                                                 */
/*---------------------------------------------------------------------------*/
 
/*
 * RX clock
 * Responsible for starting and finishing RX
 */
void eth_controller_rx_clock( void *dat )
{
    struct eth_device *eth = dat;
    int breakpoint = 0;
    long nread;
    unsigned long send_word;
 
 
    switch (eth->rx.state) {
    case ETH_RXSTATE_IDLE:
	debug (3, "RX - entering state WAIT4BD (%ld)\n", eth->rx.bd_index);
        eth->rx.state = ETH_RXSTATE_WAIT4BD;
        break;
 
    case ETH_RXSTATE_WAIT4BD:
        eth->rx.bd = eth->regs.bd_ram[eth->rx.bd_index];
        eth->rx.bd_addr = eth->regs.bd_ram[eth->rx.bd_index + 1];
 
        if ( TEST_FLAG( eth->rx.bd, ETH_RX_BD, READY ) ) {
            /*****************/
            /* Initialize RX */
            CLEAR_FLAG( eth->rx.bd, ETH_RX_BD, MISS );
            CLEAR_FLAG( eth->rx.bd, ETH_RX_BD, INVALID );
            CLEAR_FLAG( eth->rx.bd, ETH_RX_BD, DRIBBLE );
            CLEAR_FLAG( eth->rx.bd, ETH_RX_BD, UVERRUN );
            CLEAR_FLAG( eth->rx.bd, ETH_RX_BD, COLLISION );
            CLEAR_FLAG( eth->rx.bd, ETH_RX_BD, TOOBIG );
            CLEAR_FLAG( eth->rx.bd, ETH_RX_BD, TOOSHORT );
 
            debug( 3,  "Ethernet: Starting RX\n" );
 
            /* Setup file to read from */
            if ( TEST_FLAG( eth->regs.moder, ETH_MODER, LOOPBCK ) ) {
                eth->rx.fd = eth->txfd;
                eth->rx.offset = &(eth->loopback_offset);
            } else {
                eth->rx.fd = eth->rxfd;
                eth->rx.offset = 0;
            }
	    debug (3, "RX - entering state RECV\n");   
            eth->rx.state = ETH_RXSTATE_RECV;
        }
        else if (!TEST_FLAG( eth->regs.moder, ETH_MODER, RXEN)) {
	  debug (3, "RX - entering state IDLE\n");
	  eth->rx.state = ETH_RXSTATE_IDLE;
	}
	else {
            nread = recv(eth->rtx_sock, eth->rx_buff, ETH_MAXPL, /*MSG_PEEK | */MSG_DONTWAIT);
    	    if (nread > 0) {
                SET_FLAG (eth->regs.int_source, ETH_INT_SOURCE, BUSY);
		if ( TEST_FLAG(eth->regs.int_mask, ETH_INT_MASK, BUSY_M) )
		  report_interrupt(eth->mac_int);
            }
        }
        break;
 
    case ETH_RXSTATE_RECV:
        switch (eth->rtx_type) {
        case ETH_RTX_FILE:
            /* Read packet length */
            if ( eth_read_rx_file( eth, &(eth->rx.packet_length), sizeof(eth->rx.packet_length) )
                     < sizeof(eth->rx.packet_length) ) {
                /* TODO: just do what real ethernet would do (some kind of error state) */
                debug (4, "eth_start_rx(): File does not have a packet ready for RX (len = %ld)\n", eth->rx.packet_length );
                runtime.sim.cont_run = 0;
                break;
            }
 
            /* Packet must be big enough to hold a header */
            if ( eth->rx.packet_length < ETHER_HDR_LEN ){
                debug( 3,  "eth_start_rx(): Packet too small\n" );
                eth_rx_next_packet( eth );
 
		debug (3, "RX - entering state WAIT4BD\n");
                eth->rx.state = ETH_RXSTATE_WAIT4BD;
                break;
            }
 
            eth->rx.bytes_read = 0;
            eth->rx.bytes_left = eth->rx.packet_length;     
 
            /* for now Read entire packet into memory */
            nread = eth_read_rx_file( eth, eth->rx_buff, eth->rx.bytes_left );
            if ( nread < eth->rx.bytes_left ) {
                debug (3, "Read %ld from %ld. Error!\n", nread, eth->rx.bytes_left);
                eth->rx.error = 1;
                break;
            }
 
            eth->rx.packet_length = nread;
            eth->rx.bytes_left = nread;
            eth->rx.bytes_read = 0;
 
            debug (3, "RX - entering state WRITEFIFO\n");
            eth->rx.state = ETH_RXSTATE_WRITEFIFO;
 
            break;
 
        case ETH_RTX_SOCK:
    	    nread = recv(eth->rtx_sock, eth->rx_buff, ETH_MAXPL, MSG_DONTWAIT);
 
            if (nread == 0)
		break;
    	    else if (nread < 0) {
        	if ( errno != EAGAIN ) {        		    
      		    debug (3, "recv() FAILED!\n");
       		    break;
       		}
                else break;
            }
            /* If not promiscouos mode, check the destination address */
            if (!TEST_FLAG(eth->regs.moder, ETH_MODER, PRO)) {
	        if (TEST_FLAG(eth->regs.moder, ETH_MODER, IAM) && (eth->rx_buff[0] & 1)) {
                /* Nothing for now */
                }
 
 		if (eth->mac_address[5] != eth->rx_buff[0] ||
	 	    eth->mac_address[4] != eth->rx_buff[1] ||
	 	    eth->mac_address[3] != eth->rx_buff[2] ||
	 	    eth->mac_address[2] != eth->rx_buff[3] ||
	 	    eth->mac_address[1] != eth->rx_buff[4] ||
	 	    eth->mac_address[0] != eth->rx_buff[5])
                    break;
            }
 
    	    eth->rx.packet_length = nread;
    	    eth->rx.bytes_left = nread;
    	    eth->rx.bytes_read = 0;
 
    	    debug (3, "RX - entering state WRITEFIFO\n");
    	    eth->rx.state = ETH_RXSTATE_WRITEFIFO;
 
            break;
	case ETH_RTX_VAPI:
	    break;
        }
        break;
 
    case ETH_RXSTATE_WRITEFIFO:
#if 1
        send_word = ((unsigned long)eth->rx_buff[eth->rx.bytes_read]   << 24) |
                    ((unsigned long)eth->rx_buff[eth->rx.bytes_read+1] << 16) |
                    ((unsigned long)eth->rx_buff[eth->rx.bytes_read+2] << 8)  |
                    ((unsigned long)eth->rx_buff[eth->rx.bytes_read+3] );
        set_direct32( eth->rx.bd_addr + eth->rx.bytes_read, send_word, &breakpoint, 0, 0);
        /* update counters */
        debug (3, "Write %ld, left %ld - %08lXd\n", eth->rx.bytes_read,
               eth->rx.bytes_left, send_word);
        eth->rx.bytes_left -= 4;
        eth->rx.bytes_read += 4;        
#else
        set_direct8( eth->rx.bd_addr + eth->rx.bytes_read, eth->rx_buff[eth->rx.bytes_read], &breakpoint, 0, 0);
        eth->rx.bytes_left -= 1;
        eth->rx.bytes_read += 1;        
#endif
 
        if ( eth->rx.bytes_left <= 0 ) {
            /* Write result to bd */
            SET_FIELD( eth->rx.bd, ETH_RX_BD, LENGTH, eth->rx.packet_length );
            CLEAR_FLAG( eth->rx.bd, ETH_RX_BD, READY);
            SET_FLAG( eth->regs.int_source, ETH_INT_SOURCE, RXB);
	    debug (4, "ETH_INT_SOURCE = %0lx\n", eth->regs.int_source);
 
            if ( eth->rx.packet_length < (GET_FIELD( eth->regs.packetlen, ETH_PACKETLEN, MINFL ) - 4) )
                SET_FLAG( eth->rx.bd, ETH_RX_BD, TOOSHORT);
            if ( eth->rx.packet_length > GET_FIELD( eth->regs.packetlen, ETH_PACKETLEN, MAXFL ) )
                SET_FLAG( eth->rx.bd, ETH_RX_BD, TOOBIG);
 
            eth->regs.bd_ram[eth->rx.bd_index] = eth->rx.bd;
 
            /* advance to next BD */
            if ( TEST_FLAG( eth->rx.bd, ETH_RX_BD, WRAP ) || eth->rx.bd_index >= ETH_BD_COUNT )
                eth->rx.bd_index = eth->regs.tx_bd_num << 1;
            else
                eth->rx.bd_index += 2;
 
            if ( ( TEST_FLAG( eth->regs.int_mask, ETH_INT_MASK, RXB_M ) ) &&
                 ( TEST_FLAG( eth->rx.bd, ETH_RX_BD, IRQ )              ) ) {
                report_interrupt( eth->mac_int );
            }
 
            /* ready to receive next packet */
	        debug (3, "RX - entering state IDLE\n");
            eth->rx.state = ETH_RXSTATE_IDLE;
        }
        break;
    }
 
    /* Reschedule */
    SCHED_ADD( eth_controller_rx_clock, dat, 1 );
}
 
/* ========================================================================= */
/* Move to next RX BD */
void eth_rx_next_packet( struct eth_device *eth )
{
    /* Skip any possible leftovers */
    if ( eth->rx.bytes_left )
	eth_skip_rx_file( eth, eth->rx.bytes_left );
}
/* "Skip" bytes in RX file */
void eth_skip_rx_file( struct eth_device *eth, off_t count )
{
    eth->rx.offset += count;
}
 
/* Move RX file position back */
void eth_rewind_rx_file( struct eth_device *eth, off_t count )
{
    eth->rx.offset -= count;
}
/*
 * Utility function to read from the ethernet RX file
 * This function moves the file pointer to the current place in the packet before reading
 */
ssize_t eth_read_rx_file( struct eth_device *eth, void *buf, size_t count )
{
    ssize_t result;
 
    if ( eth->rx.fd <= 0 ) {
	debug( 3,  "Ethernet: No RX file\n" );
	return 0;
    }
 
    if ( eth->rx.offset )
	if ( lseek( eth->rx.fd, *(eth->rx.offset), SEEK_SET ) == (off_t)-1 ) {
	    debug( 3,  "Ethernet: Error seeking RX file\n" );
	    return 0;
	}
 
    result = read( eth->rx.fd, buf, count );
    debug (4, "Ethernet: read result = %d \n", result);
    if ( eth->rx.offset && result >= 0 )
	*(eth->rx.offset) += result;
 
    return result;
}
 
/* ========================================================================= */
 
/*
  Reset. Initializes all registers to default and places devices in
         memory address space.
*/
void eth_reset(void *dat)
{
    struct eth_device *eth = dat;
#if HAVE_ETH_PHY
    int j;
    struct sockaddr_ll sll;
#endif /* HAVE_ETH_PHY */
 
    if ( eth->baseaddr != 0 ) {
        switch (eth->rtx_type) {
        case ETH_RTX_FILE:
            /* (Re-)open TX/RX files */
            if ( eth->rxfd > 0 )
                close( eth->rxfd );
            if ( eth->txfd > 0 )
                close( eth->txfd );
            eth->rxfd = eth->txfd = -1;
 
            if ( (eth->rxfd = open( eth->rxfile, O_RDONLY )) < 0 )
                fprintf( stderr, "Cannot open Ethernet RX file \"%s\"\n", eth->rxfile );
            if ( (eth->txfd = open( eth->txfile, 
                                    O_RDWR | O_CREAT | O_APPEND
 
#if defined(O_SYNC)	/* BSD / Mac OS X manual doesn't know about O_SYNC */
									| O_SYNC
#endif
									,
                                    S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH )) < 0 )
                fprintf( stderr, "Cannot open Ethernet TX file \"%s\"\n", eth->txfile );
            eth->loopback_offset = lseek( eth->txfd, 0, SEEK_END );
 
            break;
#if HAVE_ETH_PHY
        case ETH_RTX_SOCK:
            /* (Re-)open TX/RX sockets */
            if (eth->rtx_sock != 0)
                break;
 
            debug (3, "RTX oppening socket...\n");
            eth->rtx_sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
            if (eth->rtx_sock == -1) {
                fprintf( stderr, "Cannot open rtx_sock.\n");
                return;
            }
 
            /* get interface index number */
            debug (3, "RTX getting interface...\n");
            memset(&(eth->ifr), 0, sizeof(eth->ifr));
            strncpy(eth->ifr.ifr_name, eth->sockif, IFNAMSIZ);
            if (ioctl(eth->rtx_sock, SIOCGIFINDEX, &(eth->ifr)) == -1) {
                fprintf( stderr, "SIOCGIFINDEX failed!\n");
                return;
            }           
            debug (3, "RTX Socket Interface : %d\n", eth->ifr.ifr_ifindex);
 
            /* Bind to interface... */
            debug (3, "Binding to the interface ifindex=%d\n", eth->ifr.ifr_ifindex); 
            memset(&sll, 0xff, sizeof(sll));
            sll.sll_family = AF_PACKET;    /* allways AF_PACKET */
            sll.sll_protocol = htons(ETH_P_ALL);
            sll.sll_ifindex = eth->ifr.ifr_ifindex;
            if (bind(eth->rtx_sock, (struct sockaddr *)&sll, sizeof(sll)) == -1) {
                fprintf( stderr, "Error bind().\n");
                return;
            }
 
            /* first, flush all received packets. */
	    debug (3, "Flush");
	    do {
                fd_set fds;
                struct timeval t;
 
		debug( 3, ".");
                FD_ZERO(&fds);
                FD_SET(eth->rtx_sock, &fds);
                memset(&t, 0, sizeof(t));
                j = select(FD_SETSIZE, &fds, NULL, NULL, &t);
                if (j > 0)
                    recv(eth->rtx_sock, eth->rx_buff, j, 0);
            } while (j);
	    debug (3, "\n");
 
            break;
#else /* HAVE_ETH_PHY */
        case ETH_RTX_SOCK:
            fprintf (stderr, "Ethernet phy not enabled in this configuration.  Configure with --enable-ethphy.\n");
            exit (1);
            break;
#endif /* HAVE_ETH_PHY */
        }
 
        /* Set registers to default values */
        memset( &(eth->regs), 0, sizeof(eth->regs) );
        eth->regs.moder = 0x0000A000;
        eth->regs.ipgt = 0x00000012;
        eth->regs.ipgr1 = 0x0000000C;
        eth->regs.ipgr2 = 0x00000012;
        eth->regs.packetlen = 0x003C0600;
        eth->regs.collconf = 0x000F003F;
        eth->regs.miimoder = 0x00000064;
        eth->regs.tx_bd_num = 0x00000040;
 
        /* Initialize TX/RX status */
        memset( &(eth->tx), 0, sizeof(eth->tx) );
        memset( &(eth->rx), 0, sizeof(eth->rx) );        
        eth->rx.bd_index = eth->regs.tx_bd_num << 1;
 
	/* Initialize VAPI */
	if (eth->base_vapi_id) {
	    vapi_install_multi_handler( eth->base_vapi_id, ETH_NUM_VAPI_IDS, eth_vapi_read, dat );
	}
    }
}
/* ========================================================================= */
 
 
/* 
  Print register values on stdout 
*/
void eth_status( void *dat )
{
    struct eth_device *eth = dat;
 
    PRINTF( "\nEthernet MAC at 0x%"PRIxADDR":\n", eth->baseaddr );
    PRINTF( "MODER        : 0x%08lX\n", eth->regs.moder );
    PRINTF( "INT_SOURCE   : 0x%08lX\n", eth->regs.int_source );
    PRINTF( "INT_MASK     : 0x%08lX\n", eth->regs.int_mask );
    PRINTF( "IPGT         : 0x%08lX\n", eth->regs.ipgt );
    PRINTF( "IPGR1        : 0x%08lX\n", eth->regs.ipgr1 );
    PRINTF( "IPGR2        : 0x%08lX\n", eth->regs.ipgr2 );
    PRINTF( "PACKETLEN    : 0x%08lX\n", eth->regs.packetlen );
    PRINTF( "COLLCONF     : 0x%08lX\n", eth->regs.collconf );
    PRINTF( "TX_BD_NUM    : 0x%08lX\n", eth->regs.tx_bd_num );
    PRINTF( "CTRLMODER    : 0x%08lX\n", eth->regs.controlmoder );
    PRINTF( "MIIMODER     : 0x%08lX\n", eth->regs.miimoder );
    PRINTF( "MIICOMMAND   : 0x%08lX\n", eth->regs.miicommand );
    PRINTF( "MIIADDRESS   : 0x%08lX\n", eth->regs.miiaddress );
    PRINTF( "MIITX_DATA   : 0x%08lX\n", eth->regs.miitx_data );
    PRINTF( "MIIRX_DATA   : 0x%08lX\n", eth->regs.miirx_data );
    PRINTF( "MIISTATUS    : 0x%08lX\n", eth->regs.miistatus );
    PRINTF( "MAC Address  : %02X:%02X:%02X:%02X:%02X:%02X\n",
           eth->mac_address[0], eth->mac_address[1], eth->mac_address[2],
           eth->mac_address[3], eth->mac_address[4], eth->mac_address[5] );
    PRINTF( "HASH0        : 0x%08lX\n", eth->regs.hash0 );
    PRINTF( "HASH1        : 0x%08lX\n", eth->regs.hash1 );
}
/* ========================================================================= */
 
 
/* 
  Read a register 
*/
uint32_t eth_read32( oraddr_t addr, void *dat )
{
    struct eth_device *eth = dat;
    addr -= eth->baseaddr;
 
    switch( addr ) {
    case ETH_MODER: return eth->regs.moder;
    case ETH_INT_SOURCE: return eth->regs.int_source;
    case ETH_INT_MASK: return eth->regs.int_mask;
    case ETH_IPGT: return eth->regs.ipgt;
    case ETH_IPGR1: return eth->regs.ipgr1;
    case ETH_IPGR2: return eth->regs.ipgr2;
    case ETH_PACKETLEN: return eth->regs.packetlen;
    case ETH_COLLCONF: return eth->regs.collconf;
    case ETH_TX_BD_NUM: return eth->regs.tx_bd_num;
    case ETH_CTRLMODER: return eth->regs.controlmoder;
    case ETH_MIIMODER: return eth->regs.miimoder;
    case ETH_MIICOMMAND: return eth->regs.miicommand;
    case ETH_MIIADDRESS: return eth->regs.miiaddress;
    case ETH_MIITX_DATA: return eth->regs.miitx_data;
    case ETH_MIIRX_DATA: return eth->regs.miirx_data;
    case ETH_MIISTATUS: return eth->regs.miistatus;
    case ETH_MAC_ADDR0: return (((unsigned long)eth->mac_address[3]) << 24) |
                               (((unsigned long)eth->mac_address[2]) << 16) |
                               (((unsigned long)eth->mac_address[1]) << 8) |
                                 (unsigned long)eth->mac_address[0];
    case ETH_MAC_ADDR1: return (((unsigned long)eth->mac_address[5]) << 8) |
                                 (unsigned long)eth->mac_address[4];
    case ETH_HASH0: return eth->regs.hash0;
    case ETH_HASH1: return eth->regs.hash1;
    /*case ETH_DMA_RX_TX: return eth_rx( eth );*/
    }
 
    if ( (addr >= ETH_BD_BASE) && (addr < ETH_BD_BASE + ETH_BD_SPACE) )
        return eth->regs.bd_ram[(addr - ETH_BD_BASE) / 4];
 
    PRINTF( "eth_read32( 0x%"PRIxADDR" ): Illegal address\n",
            addr + eth->baseaddr );
    runtime.sim.cont_run = 0;
    return 0;
}
/* ========================================================================= */
 
 
/* 
  Write a register 
*/
void eth_write32( oraddr_t addr, uint32_t value, void *dat )
{
    struct eth_device *eth = dat;
 
    addr -= eth->baseaddr;
 
    switch( addr ) {
    case ETH_MODER:
 
        if ( !TEST_FLAG( eth->regs.moder, ETH_MODER, RXEN) &&
             TEST_FLAG( value, ETH_MODER, RXEN) )
            SCHED_ADD( eth_controller_rx_clock, dat, 1 );
        else if ( !TEST_FLAG( value, ETH_MODER, RXEN) )
            SCHED_FIND_REMOVE( eth_controller_rx_clock, dat);
 
        if ( !TEST_FLAG( eth->regs.moder, ETH_MODER, TXEN) &&
             TEST_FLAG( value, ETH_MODER, TXEN) )
            SCHED_ADD( eth_controller_tx_clock, dat, 1 );
        else if ( !TEST_FLAG( value, ETH_MODER, TXEN) )
            SCHED_FIND_REMOVE( eth_controller_tx_clock, dat);
 
        eth->regs.moder = value;
 
        if (TEST_FLAG(value, ETH_MODER, RST))
            eth_reset( dat );
        return;
    case ETH_INT_SOURCE: eth->regs.int_source &= ~value; return;
    case ETH_INT_MASK: eth->regs.int_mask = value; return;
    case ETH_IPGT: eth->regs.ipgt = value; return;
    case ETH_IPGR1: eth->regs.ipgr1 = value; return;
    case ETH_IPGR2: eth->regs.ipgr2 = value; return;
    case ETH_PACKETLEN: eth->regs.packetlen = value; return;
    case ETH_COLLCONF: eth->regs.collconf = value; return;
    case ETH_TX_BD_NUM: eth_write_tx_bd_num( eth, value ); return;
    case ETH_CTRLMODER: eth->regs.controlmoder = value; return;
    case ETH_MIIMODER: eth->regs.miimoder = value; return;
    case ETH_MIICOMMAND: eth->regs.miicommand = value; return;
    case ETH_MIIADDRESS: eth->regs.miiaddress = value; return;
    case ETH_MIITX_DATA: eth->regs.miitx_data = value; return;
    case ETH_MIIRX_DATA: eth->regs.miirx_data = value; return;
    case ETH_MIISTATUS: eth->regs.miistatus = value; return;
    case ETH_MAC_ADDR0:
        eth->mac_address[0] = value & 0xFF;
        eth->mac_address[1] = (value >> 8) & 0xFF;
        eth->mac_address[2] = (value >> 16) & 0xFF;
        eth->mac_address[3] = (value >> 24) & 0xFF;
        return;
    case ETH_MAC_ADDR1:
        eth->mac_address[4] = value & 0xFF;
        eth->mac_address[5] = (value >> 8) & 0xFF;
        return;
    case ETH_HASH0: eth->regs.hash0 = value; return;
    case ETH_HASH1: eth->regs.hash1 = value; return;
 
    /*case ETH_DMA_RX_TX: eth_tx( eth, value ); return;*/
    }
 
    if ( (addr >= ETH_BD_BASE) && (addr < ETH_BD_BASE + ETH_BD_SPACE) ) {
        eth->regs.bd_ram[(addr - ETH_BD_BASE) / 4] = value;
        return;
    }
 
    PRINTF( "eth_write32( 0x%"PRIxADDR" ): Illegal address\n",
            addr + eth->baseaddr );
    runtime.sim.cont_run = 0;
    return;
}
/* ========================================================================= */
 
 
/*
 *   VAPI connection to outside
 */
static void eth_vapi_read (unsigned long id, unsigned long data, void *dat)
{
    unsigned long which;
    struct eth_device *eth = dat;
 
    which = id - eth->base_vapi_id;
 
    debug( 5, "ETH: id %08lx, data %08lx\n", id, data );
 
    if ( !eth ) {
	debug( 1, "ETH: VAPI ID %08lx is not ours!\n", id );
	return;
    }
 
    switch( which ) {
    case ETH_VAPI_DATA:
	break;
    case ETH_VAPI_CTRL:
	break;
    }
}
/* ========================================================================= */
 
 
/* When TX_BD_NUM is written, also reset current RX BD index */
void eth_write_tx_bd_num( struct eth_device *eth, unsigned long value )
{
    eth->regs.tx_bd_num = value & 0xFF;
    eth->rx.bd_index = eth->regs.tx_bd_num << 1;
}
 
/* ========================================================================= */
 
/*-----------------------------------------------[ Ethernet configuration ]---*/
void eth_baseaddr(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  eth->baseaddr = val.addr_val;
}
 
void eth_dma(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  eth->dma = val.addr_val;
}
 
void eth_rtx_type(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  eth->rtx_type = val.int_val;
}
 
void eth_rx_channel(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  eth->rx_channel = val.int_val;
}
 
void eth_tx_channel(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  eth->tx_channel = val.int_val;
}
 
void eth_rxfile(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  if(!(eth->rxfile = strdup(val.str_val))) {
    fprintf(stderr, "Peripheral Ethernet: Run out of memory\n");
    exit(-1);
  }
}
 
void eth_txfile(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  if(!(eth->txfile = strdup(val.str_val))) {
    fprintf(stderr, "Peripheral Ethernet: Run out of memory\n");
    exit(-1);
  }
}
 
void eth_sockif(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  if(!(eth->sockif = strdup(val.str_val))) {
    fprintf(stderr, "Peripheral Ethernet: Run out of memory\n");
    exit(-1);
  }
}
 
void eth_irq(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  eth->mac_int = val.int_val;
}
 
void eth_vapi_id(union param_val val, void *dat)
{
  struct eth_device *eth = dat;
  eth->base_vapi_id = val.int_val;
}
 
void *eth_sec_start(void)
{
  struct eth_device *new = malloc(sizeof(struct eth_device));
 
  if(!new) {
    fprintf(stderr, "Peripheral Eth: Run out of memory\n");
    exit(-1);
  }
 
  return new;
}
 
void eth_sec_end(void *dat)
{
  struct eth_device *eth = dat;
 
  register_memoryarea( eth->baseaddr, ETH_ADDR_SPACE, 4, 0, eth_read32, eth_write32, dat );
  reg_sim_stat( eth_status, dat );
  reg_sim_reset( eth_reset, dat );
}
 
void reg_ethernet_sec(void)
{
  struct config_section *sec = reg_config_sec("ethernet", eth_sec_start, eth_sec_end);
 
  reg_config_param(sec, "irq", paramt_int, eth_irq);
  reg_config_param(sec, "baseaddr", paramt_int, eth_baseaddr);
  reg_config_param(sec, "dma", paramt_int, eth_dma);
  reg_config_param(sec, "rtx_type", paramt_int, eth_rtx_type);
  reg_config_param(sec, "rx_channel", paramt_int, eth_rx_channel);
  reg_config_param(sec, "tx_channel", paramt_int, eth_tx_channel);
  reg_config_param(sec, "rxfile", paramt_str, eth_rxfile);
  reg_config_param(sec, "txfile", paramt_str, eth_txfile);
  reg_config_param(sec, "sockif", paramt_str, eth_sockif);
  reg_config_param(sec, "vapi_id", paramt_int, eth_vapi_id);
}
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.