Subversion Repositories or1k_old

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  wb_slave_behavioral.v                                       ////
////                                                              ////
////                                                              ////
////  This file is part of the SoC Debug Interface.               ////
////  http://www.opencores.org/projects/DebugInterface/           ////
////                                                              ////
////  Author(s):                                                  ////
////      Tadej Markovic, tadej@opencores.org                     ////
////                                                              ////
////                                                              ////
////  All additional information is avaliable in the README.txt   ////
////  file.                                                       ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 - 2004 Authors                            ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.3  2004/03/28 20:27:40  igorm
// New release of the debug interface (3rd. release).
//
// Revision 1.2  2004/01/15 10:47:13  mohor
// Working.
//
// Revision 1.1  2003/12/23 14:26:01  mohor
// New version of the debug interface. Not finished, yet.
//
//
//
//
 
`include "timescale.v"
`include "wb_model_defines.v"
module wb_slave_behavioral
(
	CLK_I,
	RST_I,
	ACK_O,
	ADR_I,
	CYC_I,
	DAT_O,
	DAT_I,
	ERR_O,
	RTY_O,
	SEL_I,
	STB_I,
	WE_I,
	CAB_I
);
 
/*------------------------------------------------------------------------------------------------------
WISHBONE signals
------------------------------------------------------------------------------------------------------*/
input                   CLK_I;
input                   RST_I;
output                  ACK_O;
input   `WB_ADDR_TYPE   ADR_I;
input                   CYC_I;
output  `WB_DATA_TYPE   DAT_O;
input   `WB_DATA_TYPE   DAT_I;
output                  ERR_O;
output                  RTY_O;
input   `WB_SEL_TYPE    SEL_I;
input                   STB_I;
input                   WE_I;
input                   CAB_I;
 
reg     `WB_DATA_TYPE   DAT_O;
 
/*------------------------------------------------------------------------------------------------------
Asynchronous dual-port RAM signals for storing and fetching the data
------------------------------------------------------------------------------------------------------*/
//reg     `WB_DATA_TYPE wb_memory [0:16777215]; // WB memory - 24 addresses connected - 2 LSB not used
reg     `WB_DATA_TYPE wb_memory [0:1048575]; // WB memory - 20 addresses connected - 2 LSB not used
reg     `WB_DATA_TYPE mem_wr_data_out;
reg     `WB_DATA_TYPE mem_rd_data_in;
 
/*------------------------------------------------------------------------------------------------------
Maximum values for WAIT and RETRY counters and which response !!!
------------------------------------------------------------------------------------------------------*/
reg     [2:0]  a_e_r_resp; // tells with which cycle_termination_signal must wb_slave respond !
reg     [8:0]  wait_cyc;
reg     [7:0]  max_retry;
 
// assign registers to default state while in reset
// always@(RST_I)
// begin
//   if (RST_I)
//   begin
//     a_e_r_resp <= 3'b000; // do not respond
//     wait_cyc   <= 8'b0; // no wait cycles
//     max_retry  <= 8'h0; // no retries
//   end
// end //reset
 
task cycle_response;
  input [2:0]  ack_err_rty_resp; // acknowledge, error or retry response input flags
  input [8:0]  wait_cycles; // if wait cycles before each data termination cycle (ack, err or rty)
  input [7:0]  retry_cycles; // noumber of retry cycles before acknowledge cycle
begin
  // assign values
  a_e_r_resp <= #1 ack_err_rty_resp;
  wait_cyc   <= #1 wait_cycles;
  max_retry  <= #1 retry_cycles;
end
endtask // cycle_response
 
/*------------------------------------------------------------------------------------------------------
Tasks for writing and reading to and from memory !!!
------------------------------------------------------------------------------------------------------*/
reg    `WB_ADDR_TYPE task_wr_adr_i;
reg    `WB_ADDR_TYPE task_rd_adr_i;
reg    `WB_DATA_TYPE task_dat_i;
reg    `WB_DATA_TYPE task_dat_o;
reg    `WB_SEL_TYPE  task_sel_i;
reg                  task_wr_data;
reg                  task_data_written;
reg    `WB_DATA_TYPE task_mem_wr_data;
 
// write to memory
task wr_mem;
  input  `WB_ADDR_TYPE adr_i;
  input  `WB_DATA_TYPE dat_i;
  input  `WB_SEL_TYPE  sel_i;
begin
  task_data_written = 0;
  task_wr_adr_i = adr_i;
  task_dat_i = dat_i;
  task_sel_i = sel_i;
  task_wr_data = 1;
  wait(task_data_written);
  task_wr_data = 0;
end
endtask
 
// read from memory
task rd_mem;
  input  `WB_ADDR_TYPE adr_i;
  output `WB_DATA_TYPE dat_o;
  input  `WB_SEL_TYPE  sel_i;
begin
  task_rd_adr_i = adr_i;
  task_sel_i = sel_i;
  #1;
  dat_o = task_dat_o;
end
endtask
 
/*------------------------------------------------------------------------------------------------------
Internal signals and logic
------------------------------------------------------------------------------------------------------*/
reg            calc_ack;
reg            calc_err;
reg            calc_rty;
 
reg     [7:0]  retry_cnt;
reg     [7:0]  retry_num;
reg            retry_expired;
 
// Retry counter
always@(posedge RST_I or posedge CLK_I)
begin
  if (RST_I)
    retry_cnt <= #1 8'h00;
  else
  begin
    if (calc_ack || calc_err)
      retry_cnt <= #1 8'h00;
    else if (calc_rty)
      retry_cnt <= #1 retry_num;
  end
end
 
always@(retry_cnt or max_retry)
begin
  if (retry_cnt < max_retry)
  begin
    retry_num = retry_cnt + 1'b1;
    retry_expired = 1'b0;
  end
  else
  begin
    retry_num = retry_cnt;
    retry_expired = 1'b1;
  end
end
 
reg     [8:0]  wait_cnt;
reg     [8:0]  wait_num;
reg            wait_expired;
 
// Wait counter
always@(posedge RST_I or posedge CLK_I)
begin
  if (RST_I)
    wait_cnt <= #1 9'h0;
  else
  begin
    if (wait_expired || ~STB_I)
      wait_cnt <= #1 9'h0;
    else
      wait_cnt <= #1 wait_num;
  end
end
 
always@(wait_cnt or wait_cyc or STB_I or a_e_r_resp or retry_expired)
begin
  if ((wait_cyc > 0) && (STB_I))
  begin
    if (wait_cnt < wait_cyc)
    begin
      wait_num = wait_cnt + 1'b1;
      wait_expired = 1'b0;
      calc_ack = 1'b0;
      calc_err = 1'b0;
      calc_rty = 1'b0;
    end
    else
    begin
      wait_num = wait_cnt;
      wait_expired = 1'b1;
      if (a_e_r_resp == 3'b100)
      begin
        calc_ack = 1'b1;
        calc_err = 1'b0;
        calc_rty = 1'b0;
      end
      else
      if (a_e_r_resp == 3'b010)
      begin
        calc_ack = 1'b0;
        calc_err = 1'b1;
        calc_rty = 1'b0;
      end
      else
      if (a_e_r_resp == 3'b001)
      begin
        calc_err = 1'b0;
        if (retry_expired)
        begin
          calc_ack = 1'b1;
          calc_rty = 1'b0;
        end
        else
        begin
          calc_ack = 1'b0;
          calc_rty = 1'b1;
        end
      end
      else
      begin
        calc_ack = 1'b0;
        calc_err = 1'b0;
        calc_rty = 1'b0;
      end
    end
  end
  else
  if ((wait_cyc == 0) && (STB_I))
  begin
    wait_num = 9'h0;
    wait_expired = 1'b1;
    if (a_e_r_resp == 3'b100)
    begin
      calc_ack = 1'b1;
      calc_err = 1'b0;
      calc_rty = 1'b0;
    end
    else if (a_e_r_resp == 3'b010)
    begin
      calc_ack = 1'b0;
      calc_err = 1'b1;
      calc_rty = 1'b0;
    end
    else if (a_e_r_resp == 3'b001)
    begin
      calc_err = 1'b0;
      if (retry_expired)
      begin
        calc_ack = 1'b1;
        calc_rty = 1'b0;
      end
      else
      begin
        calc_ack = 1'b0;
        calc_rty = 1'b1;
      end
    end
    else
    begin
      calc_ack = 1'b0;
      calc_err = 1'b0;
      calc_rty = 1'b0;
    end
  end
  else
  begin
    wait_num = 9'h0;
    wait_expired = 1'b0;
    calc_ack = 1'b0;
    calc_err = 1'b0;
    calc_rty = 1'b0;
  end
end
 
wire rd_sel = (CYC_I && STB_I && ~WE_I);
wire wr_sel = (CYC_I && STB_I && WE_I);
 
// Generate cycle termination signals
assign ACK_O = calc_ack && STB_I;
assign ERR_O = calc_err && STB_I;
assign RTY_O = calc_rty && STB_I;
 
// Assign address to asynchronous memory
always@(RST_I or ADR_I)
begin
  if (RST_I) // this is added because at start of test bench we need address change in order to get data!
  begin
    #1 mem_rd_data_in = `WB_DATA_WIDTH'hxxxx_xxxx;
  end
  else
  begin
//    #1 mem_rd_data_in = wb_memory[ADR_I[25:2]];
    #1 mem_rd_data_in = wb_memory[ADR_I[21:2]];
  end
end
 
// Data input/output interface
always@(rd_sel or mem_rd_data_in or RST_I)
begin
  if (RST_I)
    DAT_O <=#1 `WB_DATA_WIDTH'hxxxx_xxxx;	// assign outputs to unknown state while in reset
  else if (rd_sel)
    DAT_O <=#1 mem_rd_data_in;
  else
    DAT_O <=#1 `WB_DATA_WIDTH'hxxxx_xxxx;
end
 
 
always@(RST_I or task_rd_adr_i)
begin
  if (RST_I)
    task_dat_o = `WB_DATA_WIDTH'hxxxx_xxxx;
  else
    task_dat_o = wb_memory[task_rd_adr_i[21:2]];
end
always@(CLK_I or wr_sel or task_wr_data or ADR_I or task_wr_adr_i or 
        mem_wr_data_out or DAT_I or task_mem_wr_data or task_dat_i or
        SEL_I or task_sel_i)
begin
  if (task_wr_data)
  begin
    task_mem_wr_data = wb_memory[task_wr_adr_i[21:2]];
 
    if (task_sel_i[3])
      task_mem_wr_data[31:24] = task_dat_i[31:24];
    if (task_sel_i[2])
      task_mem_wr_data[23:16] = task_dat_i[23:16];
    if (task_sel_i[1])
      task_mem_wr_data[15: 8] = task_dat_i[15: 8];
    if (task_sel_i[0])
      task_mem_wr_data[ 7: 0] = task_dat_i[ 7: 0];
 
    wb_memory[task_wr_adr_i[21:2]] = task_mem_wr_data; // write data
    task_data_written = 1;
  end
  else if (wr_sel && CLK_I)
  begin
//    mem_wr_data_out = wb_memory[ADR_I[25:2]]; // if no SEL_I is active, old value will be written
    mem_wr_data_out = wb_memory[ADR_I[21:2]]; // if no SEL_I is active, old value will be written
 
    if (SEL_I[3])
      mem_wr_data_out[31:24] = DAT_I[31:24];
    if (SEL_I[2])
      mem_wr_data_out[23:16] = DAT_I[23:16];
    if (SEL_I[1])
      mem_wr_data_out[15: 8] = DAT_I[15: 8];
    if (SEL_I[0])
      mem_wr_data_out[ 7: 0] = DAT_I[ 7: 0];
 
//    wb_memory[ADR_I[25:2]]  <= mem_wr_data_out; // write data
    wb_memory[ADR_I[21:2]]      = mem_wr_data_out; // write data
  end
end
 
endmodule