Subversion Repositories or1k_old

2002-08-05      Eric Norum <eric.norum@usask.ca>

        * pci/pcibios.c: Per PR262, removed all asserts so probes for 
        devices that are not present will work.  This lets you have
        multiple PCI Ethernet drivers in an application and dynamically
        use the one for the card othat is present.

2002-07-16      Eric Norum <eric.norum@usask.ca>

        * comm/uart.c: I am using a PC-104 card with no video output.  I
        found that things would lock up if a printk was followed closely by
        a printf when BSPConsolePort = BSP_UART_COM2 and
        BSPPrintkPort = BSP_UART_COM1.  With this change in place,
        printf/printk calls can be intermingled with no apparent problems.

2002-05-01      Eric Norum <eric.norum@usask.ca>

        * console/console.c, fatal/bspfatal.c, startup/bspclean.c, 
        startup/page_table.c: Per PR200 fix multi-line inline assembly 
        to satisfy gcc 3.1 and newer.

2002-03-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * comm/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * io/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * Makefile.am: Remove AUTOMAKE_OPTIONS.
        * irq/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * pci/Makefile.am: Remove AUTOMAKE_OPTIONS.

2002-01-03      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * irq/irq_init.c: Include rtems/bspIo.h instead of bspIo.h.

2001-10-12      Joel Sherrill <joel@OARcorp.com>

        * startup/linkcmds: Fixed typo.

2001-09-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * irq/Makefile.am: Use 'PREINSTALL_FILES ='.
        * comm/Makefile.am: Use 'PREINSTALL_FILES ='.
        * pci/Makefile.am: Use 'PREINSTALL_FILES ='.

2001-08-16      Mike Siers <mikes@poliac.com>

        * comm/tty_drv.c, comm/uart.c: Correct some minor cut and paste bugs.

2001-07-03      Mike Seirs <mike@poliac.com>

        * comm/tty_drv.c, comm/uart.c, comm/uart.h:  Adds the capability
        to use task driven serial I/O to ti386 BSPs. This patch leaves thex
        default I/O mode to be IRQ.  If you want to use task I/O mode,
        then the tty_drv.c file needs to be modified.  Basically, all
        you need to change is the data values of the termios callbacks
        structure.  This callback structure is used in the tty1_open
        and tty2_open functions.  The values you need to set are commented
        out in the source code. 

2001-06-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * comm/Makefile.am: Use *_HEADERS instead of *H_FILES.
        * io/Makefile.am: Ditto.
        * irq/Makefile.am: Ditto.
        * pci/Makefile.am: Ditto.

2000-10-19      Joel Sherrill <joel@OARcorp.com>

        * common/uart.h: Added prototype for BSP_uart_set_baud().

2000-10-19         Charles-Antoine Gauthier <charles.gauthier@nrc.ca>

        * comm/uart.c (BSP_uart_init): Save more line state parameters.

2000-10-18       Charles-Antoine Gauthier <charles.gauthier@nrc.ca>

        * comm/i386-stub-glue.c, comm/tty_drv.c, comm/uart.c, comm/uart.h:
        Add the ability to set parity, number of data bits and
        number of stop bits to the existing i386 serial drivers.

2000-10-17      Joel Sherrill <joel@OARcorp.com>

        * irq/idt.c, irq/Makefile.am: Moved idt.c to from libcpu/i386 so 
        i386 RTEMS can be multilib'ed.

2000-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * io/Makefile.am: Formatting.

2000-08-26  Rosimildo da Silva  <rdasilva@connecttel.com>

        * shared/comm: Added "/dev/ttyS1" & "/dev/ttyS2" support for
        the i386 BSPs.
        * shared/comm/gdb_glue.c: New file.
        * shared/comm/i386_io.c: New file.
        * shared/comm/tty_drv.c: New file.
        * shared/comm/tty_drv.h: New file.
        * shared/comm/Makefile.am: Account for new files.
        * shared/comm/uart.c: Adds support for sending characters to 
        another "line discipline."

2000-08-10      Joel Sherrill <joel@OARcorp.com>

        * ChangeLog: New file.