URL
https://opencores.org/ocsvn/or1k_old/or1k_old/trunk
Subversion Repositories or1k_old
[/] [or1k_old/] [trunk/] [rtems-20020807/] [c/] [src/] [lib/] [libcpu/] [powerpc/] [ChangeLog] - Rev 1782
Compare with Previous | Blame | View Log
2002-07-24 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* mpc6xx/mmu/pte121.c: Include <string.h> for gcc-3.1.2002-07-22 Till Straumann <strauman@slac.stanford.edu>* mpc6xx/mmu/bat.c: Per PR241, fix a tiny bug introduced by thefix for an earlier patch (PR213) which added support for settingBAT0 to setdbat().2001-05-17 Joel Sherrill <joel@OARcorp.com>* mpc6xx/exceptions/raw_exception.c, pc6xx/mmu/pte121.c: Modifiedslightly to reflect recent PowerPC re-organization and avoid warnings.2001-05-15 Till Straumann <strauman@slac.stanford.edu>* mpc6xx/mmu/pte121.c, mpc6xx/mmu/pte121.h: New files. Missed inmerge of PR213.2001-05-14 Joel Sherrill <joel@OARcorp.com>* shared/include/cpuIdent.c: Account for duplicate numbers.2002-05-01 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* rtems/powerpc/debugmod.h: New file (extracted fromscore/ppc.h).* Makefile.am: Relect changes above.2001-05-14 Till Straumann <strauman@slac.stanford.edu>* shared/include/io.h: Per PR215 address the following issues:- _IO_BASE, _ISA_MEM_BASE and PCI_DRAM_OFFSETare no longer defined by libcpu (powerpc/shared/include/io.h)but by the BSP (who is the only one to know the values)- the affected BSP (shared/motorola) headers have been fixedin a separate "libbsp/powerpc/shared" patch.- the DEC 21140 driver (libchip/network/dec21140.c) has beenfixed to use PCI_DRAM_OFFSET instead of PREP_PCI_DRAM_OFFSET.and PCI_MEM_BASE instead of PREP_ISA_MEM_BASE. PCI_MEM_BASEis to be defined by the BSP who is using this driver.- the DEC driver also has been fixed to use the newerrtems_bsp_delay_in_bus_cycles() instead of the obsoletedelay_in_bus_cycles().2001-05-14 Till Straumann <strauman@slac.stanford.edu>* rtems/powerpc/registers.h, rtems/score/ppc.h: Per PR213, addthe following:- support for the MPC74000 (AKA G4); there is noAltiVec support yet, however.- the cache flushing assembly code uses hardware-flush on the G4.Also, a couple of hardcoded numerical values were replacedby more readable symbolic constants.- extended interrupt-disabled code section so enclose the entirecache flush/invalidate procedure (as recommended by the book).This is not (latency) critical as it is only used byinit code but prevents possible corruption.- Trivial page table support as been added.(1:1 effective-virtual-physical address mapping which is onlyuseful only on CPUs which feature hardware TLB replacement,e.g. >604. This allows for write-protecting memory regions,e.g. text/ro-data which makes catching corruptors a lot easier.It also frees one DBAT/IBAT and gives more flexibilityfor setting up address maps :-)- setdbat() allows changing BAT0 also (since the BSP may usea page table, BAT0 could be available...).- asm_setdbatX() violated the SVR ABI by usingr20 as a scratch register; changed for r0- according to the book, a context synchronizing instruction isnecessary prior to and after changing a DBAT -> isync added2002-04-30 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* rtems/powerpc/cache.h: New file (extracted fromold-exceptions/cpu.h)* Makefile.am: Relect changes above.2002-04-18 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* shared/include/cpu.h: Removed.* shared/include/Makefile.am: Reflect changes above.* shared/include/spr.h: Include rtems/powerpc/registers.h instead oflibcpu/cpu.h.* mpc6xx/clock/c_clock.c: Reflect changes to <rtems/score/cpu.h>.* mpc6xx/exceptions/asm_utils.S: Ditto.* mpc6xx/exceptions/raw_exception.c: Ditto.* mpc6xx/mmu/mmuAsm.S: Ditto.* mpc6xx/timer/timer.c: Ditto.* mpc8260/exceptions/asm_utils.S: Ditto.* mpc8260/exceptions/raw_exception.c: Ditto.* mpc8xx/exceptions/asm_utils.S: Ditto.* mpc8xx/exceptions/raw_exception.c: Ditto.* ppc403/vectors/vectors.S: Include <asm.h> instead of "asm.h".2001-04-17 Joel Sherrill <joel@OARcorp.com>* shared/include/cpu.h: Added ifndef ASM.2001-04-17 Joel Sherrill <joel@OARcorp.com>* ChangeLog: Corrected paths on past few commits.2002-04-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* shared/include/cpu.h: Don't include cpuIdent.h.2002-04-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* mpc8260/exceptions/raw_exception.c: Include <libcpu/cpuIdent.h>.2002-04-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* mpc8xx/exceptions/raw_exception.c: Include <libcpu/cpuIdent.h>.2002-04-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* mpc6xx/exceptions/raw_exception.c: Include <libcpu/cpuIdent.h>.2002-04-13 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* shared/include/cpuIdent.h: New.* shared/include/cpuIdent.c: Reflect having added cpuIdent.h.* shared/include/cpu.h: Ditto.* shared/include/Makefile.am: Add cpuIndent.h. Fix EXTRA_DIST.2001-04-03 Joel Sherrill <joel@OARcorp.com>* Closed PR57. The hack is OK as it allows a BSP to overrideor not at its discretion.* mpc8xx/timer/timer.c: Removed #warning declaring providing adefault definition for the macrosrtems_cpu_configuration_get_timer_least_valid andrtems_cpu_configuration_get_timer_average_overhead.2002-02-04 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* shared/include/byteorder.h: Use unsigned instead of __unsigned(GCC-3.0.x compatibility).2002-03-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* configure.ac:AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).AM_INIT_AUTOMAKE([no-define foreign 1.6]).* mpc505/ictrl/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc505/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc505/timer/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc505/vectors/Makefile.am: Remove AUTOMAKE_OPTIONS.* Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc6xx/clock/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc6xx/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc6xx/exceptions/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc6xx/mmu/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc6xx/timer/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc6xx/wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8260/clock/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8260/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8260/console-generic/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8260/cpm/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8260/exceptions/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8260/include/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8260/mmu/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8260/timer/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8xx/clock/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8xx/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8xx/console-generic/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8xx/cpm/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8xx/exceptions/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8xx/include/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8xx/mmu/Makefile.am: Remove AUTOMAKE_OPTIONS.* mpc8xx/timer/Makefile.am: Remove AUTOMAKE_OPTIONS.* ppc403/clock/Makefile.am: Remove AUTOMAKE_OPTIONS.* ppc403/Makefile.am: Remove AUTOMAKE_OPTIONS.* ppc403/console/Makefile.am: Remove AUTOMAKE_OPTIONS.* ppc403/ictrl/Makefile.am: Remove AUTOMAKE_OPTIONS.* ppc403/timer/Makefile.am: Remove AUTOMAKE_OPTIONS.* ppc403/tty_drv/Makefile.am: Remove AUTOMAKE_OPTIONS.* ppc403/vectors/Makefile.am: Remove AUTOMAKE_OPTIONS.* shared/include/Makefile.am: Remove AUTOMAKE_OPTIONS.* shared/Makefile.am: Remove AUTOMAKE_OPTIONS.* shared/src/Makefile.am: Remove AUTOMAKE_OPTIONS.* wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.2002-01-03 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* mpc6xx/clock/c_clock.c: Include rtems/bspIo.h instead of bspIo.h.* mpc6xx/mmu/bat.h: Include rtems/bspIo.h instead of bspIo.h.* mpc8260/console-generic/console-generic.c: Include rtems/bspIo.h instead of bspIo.h.* mpc8260/cpm/brg.c: Include rtems/bspIo.h instead of bspIo.h.* mpc8xx/console-generic/console-generic.c: Include rtems/bspIo.h instead of bspIo.h.* shared/include/cpuIdent.c: Include rtems/bspIo.h instead of bspIo.h.2001-11-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* ppc403/vectors/vectors.S: Include <bsp.h>.* shared/include/cpu.h: Remove stray empty lines.2001-11-27 Joel Sherrill <joel@OARcorp.com>,* new_exception_processing/Makefile.in,new_exception_processing/.cvsignore,new_exception_processing/Makefile.am,new_exception_processing/c_isr.inl,new_exception_processing/cpu.c, new_exception_processing/cpu.h,new_exception_processing/cpu_asm.S,old_exception_processing/Makefile.in,old_exception_processing/.cvsignore,old_exception_processing/Makefile.am, old_exception_processing/README,old_exception_processing/TODO, old_exception_processing/c_isr.inl,old_exception_processing/cpu.c, old_exception_processing/cpu.h,old_exception_processing/cpu_asm.S, old_exception_processing/irq_stub.S,old_exception_processing/ppc_offs.h,old_exception_processing/ppccache.c, old_exception_processing/rtems.S:Deleted since now under libbsp.2001-11-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* configure.ac: Remove old_exception_processing,new_exception_processing.* Makefile.am: Ditto.2001-11-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* configure.ac: Remove mpc750 from new_exception_processing,Remove mpc604 from new_exception_processing.2001-11-21 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* configure.ac: Remove ppc603e from old_exception_processing.2001-11-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* configure.ac: Remove mpc8xx from new_exception_processing.2001-11-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* configure.ac: Remove mpc8620 from new_exception_processing.2001-11-20 Joel Sherrill <joel@OARcorp.com>* ChangeLog: Corrected spacing.2001-11-14 Till Straumann <strauman@SLAC.Stanford.EDU>* new_exception_processing/cpu_asm.S: Support double or singleprecision context switches. Note that doing a single precisioncontext save/restore on a double precision PowerPC machine does notonly result in rounding errors but also screws up the FPSCR register!2001-11-08 Dennis Ehlin (ECS) <Dennis.Ehlin@ecs.ericsson.se>This modification is part of the submitted modifications necessary tosupport the IBM PPC405 family. This submission was reviewed byThomas Doerfler <Thomas.Doerfler@imd-systems.de> who ensured it didnot negatively impact the ppc403 BSPs. The submission and trackingprocess was captured as PR50.* ppc403/console/console405.c ppc403/tty_drv/.cvsignore,ppc403/tty_drv/Makefile.am, ppc403/tty_drv/tty_drv.c,ppc403/tty_drv/tty_drv.h: New files.* Makefile.am, README, configure.ac, old_exception_processing/cpu.c,old_exception_processing/cpu.h, ppc403/Makefile.am,ppc403/clock/clock.c, ppc403/console/Makefile.am,ppc403/console/console.c, ppc403/ictrl/ictrl.c, ppc403/ictrl/ictrl.h,ppc403/timer/timer.c: Modified.2001-11-07 Joel Sherrill <joel@OARcorp.com>* configure.ac: Delete the commented out line that said thatthe mpc8260 used the old exception processing model. This linealso appears to have caused ppc603e to miss this test.2001-10-29 Joel Sherrill <joel@OARcorp.com>* mpc8xx/timer/timer.c: Added hack for two macros that are not definedwith the new exception processing model:rtems_cpu_configuration_get_timer_least_valid()rtems_cpu_configuration_get_timer_average_overhead()This is captured as PR57.2001-10-24 Joel Sherrill <joel@OARcorp.com>* mpc8260/clock/.cvsignore, mpc8260/console-generic/.cvsignore,mpc8260/cpm/.cvsignore, mpc8260/exceptions/.cvsignore,mpc8260/include/.cvsignore, mpc8260/mmu/.cvsignore,mpc8260/timer/.cvsignore, mpc8260/.cvsignore: New files.2001-10-24 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* mpc8260/exceptions/Makefile.am, mpc8260/include/Makefile.am,mpc8xx/exceptions/Makefile.am: Updated to autoconf 2.52.2001-10-24 Joel Sherrill <joel@OARcorp.com>* mpc8260/include/mpc8260.h: "or" is a keyword in C++.2001-10-22 Andy Dachs <a.dachs@sstl.co.uk>* Makefile.am, README, configure.ac, new_exception_processing/cpu.h,shared/include/cpu.h, shared/include/cpuIdent.c, shared/src/cache.c:Added mpc8260 support.2001-10-22 Andy Dachs <a.dachs@sstl.co.uk>* Added mpc8260 directory.* Modified Makefile.am and configure.in to build the contents* mpc8260/Makefile.am, mpc8260/README, mpc8260/clock/Makefile.am,mpc8260/clock/clock.c, mpc8260/console-generic/Makefile.am,mpc8260/console-generic/console-generic.c, mpc8260/cpm/.cvsignore,mpc8260/cpm/Makefile.am, mpc8260/cpm/brg.c, mpc8260/cpm/cp.c,mpc8260/cpm/dpram.c, mpc8260/exceptions/.cvsignore,mpc8260/exceptions/Makefile.am, mpc8260/exceptions/asm_utils.S,mpc8260/exceptions/raw_exception.c, mpc8260/exceptions/raw_exception.h,mpc8260/include/Makefile.am, mpc8260/include/console.h,mpc8260/include/cpm.h, mpc8260/include/mmu.h,mpc8260/include/mpc8260.h, mpc8260/mmu/Makefile.am, mpc8260/mmu/mmu.c,mpc8260/timer/Makefile.am, mpc8260/timer/timer.c: New files.2001-10-12 Joel Sherrill <joel@OARcorp.com>* mpc6xx/clock/c_clock.c, mpc6xx/clock/c_clock.h, mpc8xx/clock/clock.c,mpc8xx/timer/timer.c, new_exception_processing/cpu.c,new_exception_processing/cpu.h, new_exception_processing/cpu_asm.S,old_exception_processing/cpu.c, old_exception_processing/cpu.h,old_exception_processing/cpu_asm.S, old_exception_processing/rtems.S:Fixed typo.2001-10-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* .cvsignore: Add autom4te.cache for autoconf > 2.52.* configure.in: Remove.* configure.ac: New file, generated from configure.in by autoupdate.2001-09-27 Joel Sherrill <joel@OARcorp.com>* old_exception_processing/cpu.h: Renamed delay() to rtems_bsp_delay().Renamed delay_in_bus_cycles() to rtems_bsp_delay_in_bus_cycles().* shared/include/cpu.h: Renamed delay() to rtems_bsp_delay().Renamed delay_in_bus_cycles() to rtems_bsp_delay_in_bus_cycles().2001-09-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* new_exception_processing/Makefile.am: Use 'PREINSTALL_FILES ='.* old_exception_processing/Makefile.am: Use 'PREINSTALL_FILES ='.* mpc6xx/mmu/Makefile.am: Use 'PREINSTALL_FILES ='.* mpc6xx/clock/Makefile.am: Use 'PREINSTALL_FILES ='.* mpc6xx/exceptions/Makefile.am: Use 'PREINSTALL_FILES ='.* mpc8xx/include/Makefile.am: Use 'PREINSTALL_FILES ='.* mpc8xx/exceptions/Makefile.am: Use 'PREINSTALL_FILES ='.* shared/include/Makefile.am: Use 'PREINSTALL_FILES ='.* shared/src/Makefile.am: Use 'PREINSTALL_FILES ='.* shared/src/Makefile.am: Use 'CLEANFILES ='.2000-06-08 Eric Valette <valette@crf.canon.fr>* mpc8xx/console-generic/console-generic.c:The printk/printf did not work when loaded by EPPCBUG. They didwork when loaded with the BDM debugger. I suspected EPPBUGmade some nasty things like patching Communication processormicrocode... Anyway, the attached patch:1) Enables to have printk nearly immediately after boot,2) Make printf work automagically (I do not know why except I make adifferent initialization for printk that should be overwritten byconsole init later ?)I let the default to be using EPPCBUG embedded firmware to boot andusing this printk early enabler code (LOADED_BY_EPPCBUG andEARLY_CONSOLE) are on.2001-05-24 Tom Armistead <tom_armistead@phx.mcd.mot.com>* mpc6xx/timer/timer.c: Added include of bsp.h and removedexternal declaration of BSP_Convert_decrementer() tocorrect unresolved reference to this routine.2001-05-24 Eric Valette <valette@crf.canon.fr>* mpc8xx/console-generic/console-generic.c: Bug found by Yacine<elkolli@crf.canon.fr> where the initialization or irq data structurewas incomplete in case a SMC channel was used first and later a SCC one.2001-03-30 Eric Valette <valette@crf.canon.fr>* mpc8xx/vectors/.cvsignore, mpc8xx/vectors/Makefile.am,mpc8xx/vectors/README, mpc8xx/vectors/align_h.Smpc8xx/vectors/vectors.S: These files were removed insupport of switching the mpc8xx to the use the "new exceptionprocessing model."2001-03-30 Eric Valette <valette@crf.canon.fr>* mpc8xx/exceptions/.cvsignore, mpc8xx/exceptions/Makefile.am,mpc8xx/exceptions/asm_utils.S, mpc8xx/exceptions/raw_exception.c,mpc8xx/exceptions/raw_exception.h: New files.* configure.in, mpc6xx/mmu/bat.h, mpc8xx/Makefile.am,mpc8xx/clock/clock.c,mpc8xx/console-generic/console-generic.c,mpc8xx/include/mpc8xx.h, mpc8xx/mmu/mmu.c,new_exception_processing/cpu.h, shared/include/byteorder.h,wrapup/Makefile.am: This is conversion of thempc8xx CPU to the "new exception processing model."2001-02-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* mpc505/ictrl/Makefile.am, mpc6xx/clock/Makefile.am,mpc6xx/exceptions/Makefile.am, mpc6xx/mmu/Makefile.am,mpc8xx/include/Makefile.am, new_exception_processing/Makefile.am,old_exception_processing/Makefile.am, pc403/ictrl/Makefile.am,shared/include/Makefile.am, shared/src/Makefile.am:Apply *_HEADERS instead of *H_FILES.* shared/src/.cvsignore: Add cache.h.2001-01-03 Joel Sherrill <joel@OARcorp.com>* new_exception_processing/cpu.h, old_exception_processing/cpu.c:old_exception_processing/cpu.h, Added _CPU_Initialize_vectors().In particular, spurious vector initialization had to be movedon old exception processing model.2000-11-09 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.2000-11-02 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.2000-10-26 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.Switch to GNU canonicalization.2000-10-20 Joel Sherrill <joel@OARcorp.com>* mpc8xx/console-generic/console-generic.c: Avoid use ofBSP definitions and rely on the new routinembx8xx_console_get_configuration() to get information. Thisroutine was formerly incorrectly calledmbx8xx_console_use_maximum_buffer_size().binding to the exception code.2000-10-20 Joel Sherrill <joel@OARcorp.com>* configure.in, Makefile.am: Explicitly specify whether anRTEMS_CPU_MODEL is using old or new exception processing. Thisis important because when building multilib, you do not knowthe RTEMS_CPU_MODEL. So everything built in a multilib'ed RTEMSmust be independent of the exception model and allow for latebinding to the exception code.2000-10-18 Sergei Organov <osv@javad.ru>* Added full support for MPC505.* mpc505/ictrl: New directory.* configure.in, mpc505/Makefile.am: Modified to reflect ictrl addition.* mpc505/ictrl/.cvsignore, mpc505/ictrl/Makefile.am,mpc505/ictrl/ictrl.c, mpc505/ictrl/ictrl.h: New files.* mpc505/timer/timer.c: Use <rtems.h>, not "rtems.h".* mpc505/vectors/Makefile.am: alignment exception handler now included.* mpc505/vectors/vectors.S: Now use constants for exception numbers.* old_exception_processing/ppc_offs.h: New file.* old_exception_processing/Makefile.am: Account for ppc_offs.h.* old_exception_processing/cpu.h: Make Nest and Disable levels volatile.* old_exception_processing/cpu_asm.S: Offsets moved to ppc_offs.h.2000-10-18 Joel Sherrill <joel@OARcorp.com>* mpc8xx/console-generic/console-generic.c: Removed include of<bsp.h> by adding BSP dependent routinembx8xx_console_use_maximum_buffer_size() which can be hard codedor check non-volatile memory for configuration.2000-10-18 Joel Sherrill <joel@OARcorp.com>* mpc8xx/console-generic/console-generic.c: Removed warnings.2000-10-18 Joel Sherrill <joel@OARcorp.com>* mpc6xx/clock/c_clock.h: Removed commented out reference to <bsp.h>.* mpc6xx/timer/timer.c: Ditto.2000-10-18 Joel Sherrill <joel@OARcorp.com>* mpc6xx/clock/c_clock.c, mpc6xx/clock/c_clock.h: Removed use ofbsp.h and replaced it with use of proper interfaces or explicitexterns of required functions and data.* mpc6xx/timer/timer.c: Ditto.2000-09-04 Ralf Corsepius <corsepiu@faw.uni-ulm.de>* mpc505/timer/Makefile.am, mpc505/vectors/Makefile.am,mpc6xx/clock/Makefile.am, mpc6xx/exceptions/Makefile.am,mpc6xx/mmu/Makefile.am, mpc6xx/timer/Makefile.am,mpc6xx/wrapup/Makefile.am, ppc403/clock/Makefile.am,ppc403/console/Makefile.am, ppc403/ictrl/Makefile.am,ppc403/timer/Makefile.am, ppc403/vectors/Makefile.am,shared/include/Makefile.am, shared/src/Makefile.am,wrapup/Makefile.am, mpc8xx/clock/Makefile.am,mpc8xx/console-generic/Makefile.am, mpc8xx/cpm/Makefile.am,mpc8xx/mmu/Makefile.am, mpc8xx/timer/Makefile.am,mpc8xx/vectors/Makefile.am, new_exception_processing/Makefile.am,old_exception_processing/Makefile.am: Include compile.am2000-08-11 Charles-Antoine Gauthier <charles.gauthier@nrc.ca>* mpc8xx/console-generic/console-generic.c:Add support for configuration parameters in NVRAM2000-08-25 Joel Sherrill <joel.sherrill@OARcorp.com>* ChangeLog: File paths corrected.2000-08-10 Charles-Antoine Gauthier <charles.gauthier@nrc.ca>* mpx8xx/console-generic/console-generic.c: Addition of supportfor shared printk and no termios.2000-08-10 Charles-Antoine Gauthier <charles.gauthier@nrc.ca>* mpx8xx/console-generic/console-generic.c(m8xx_uart_pollWrite):Flush actual buffer.2000-08-10 Joel Sherrill <joel@OARcorp.com>* ChangeLog: New file.
