Subversion Repositories or1k_old

The driver provides a kernel capi2.0 Interface (kernelcapi) and
on top of this a User-Level-CAPI2.0-interface (capi)
and a driver to connect isdn4linux with CAPI2.0 (capidrv).

The Author can be reached at calle@calle.in-berlin.de
The command avmcapictrl is part of the isdn4linux-utils.
t4-files can be found at ftp.avm.de.

Installing
----------

You need at least /dev/capi20 to load the firmware.

mknod /dev/capi20 c 68 0
mknod /dev/capi20.00 c 68 1
mknod /dev/capi20.01 c 68 2
.
.
.
mknod /dev/capi20.19 c 68 20

Running
-------

To use the card you need the t4-files to download the firmware.
AVM GmbH provides several t4-files for the different D-channel
protocols (b1.t4 for Euro-ISDN). Install these file in /lib/isdn.

If you not compile the driver as modules, you have to add the
card(s) and load them after booting:

avmcapictrl add 0x150 15
avmcapictrl load /lib/isdn/b1.t4 1

if you configure as modules you have two possibilities:

insmod /lib/modules/current/misc/capiutil.o
insmod /lib/modules/current/misc/kernelcapi.o portbase=0x150 irq=15
insmod /lib/modules/current/misc/capidrv.o
insmod /lib/modules/current/misc/capi.o
avmcapictrl load /lib/isdn/b1.t4

or

insmod /lib/modules/current/misc/capiutil.o
insmod /lib/modules/current/misc/kernelcapi.o
insmod /lib/modules/current/misc/capidrv.o
insmod /lib/modules/current/misc/capi.o
avmcapictrl add 0x150 15
avmcapictrl load /lib/isdn/b1.t4

Questions
---------
Check out the FAQ (ftp.franken.de).

Bugs 
----
If you find any please let me know. 

Enjoy,

Carsten Paeth (calle@calle.in-berlin.de)