OpenCores
URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [block/] [paride/] [on20.c] - Rev 1782

Compare with Previous | Blame | View Log

/* 
	on20.c	(c) 1996-8  Grant R. Guenther <grant@torque.net>
		            Under the terms of the GNU public license.
 
        on20.c is a low-level protocol driver for the
        Onspec 90c20 parallel to IDE adapter. 
*/
 
/* Changes:
 
        1.01    GRG 1998.05.06 init_proto, release_proto
 
*/
 
#define	ON20_VERSION	"1.01"
 
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
 
#include "paride.h"
 
#define op(f)	w2(4);w0(f);w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
#define vl(v)	w2(4);w0(v);w2(5);w2(7);w2(5);w2(4);
 
#define j44(a,b)  (((a>>4)&0x0f)|(b&0xf0))
 
/* cont = 0 - access the IDE register file 
   cont = 1 - access the IDE command set 
*/
 
static int on20_read_regr( PIA *pi, int cont, int regr )
 
{	int h,l, r ;
 
        r = (regr<<2) + 1 + cont;
 
        op(1); vl(r); op(0);
 
	switch (pi->mode)  {
 
        case 0:  w2(4); w2(6); l = r1();
                 w2(4); w2(6); h = r1();
                 w2(4); w2(6); w2(4); w2(6); w2(4);
		 return j44(l,h);
 
	case 1:  w2(4); w2(0x26); r = r0(); 
                 w2(4); w2(0x26); w2(4);
		 return r;
 
	}
	return -1;
}	
 
static void on20_write_regr( PIA *pi, int cont, int regr, int val )
 
{	int r;
 
	r = (regr<<2) + 1 + cont;
 
	op(1); vl(r); 
	op(0); vl(val); 
	op(0); vl(val);
}
 
static void on20_connect ( PIA *pi)
 
{	pi->saved_r0 = r0();
        pi->saved_r2 = r2();
 
	w2(4);w0(0);w2(0xc);w2(4);w2(6);w2(4);w2(6);w2(4); 
	if (pi->mode) { op(2); vl(8); op(2); vl(9); }
	       else   { op(2); vl(0); op(2); vl(8); }
}
 
static void on20_disconnect ( PIA *pi )
 
{	w2(4);w0(7);w2(4);w2(0xc);w2(4);
        w0(pi->saved_r0);
        w2(pi->saved_r2);
} 
 
static void on20_read_block( PIA *pi, char * buf, int count )
 
{	int     k, l, h; 
 
	op(1); vl(1); op(0);
 
	for (k=0;k<count;k++) 
	    if (pi->mode) {
		w2(4); w2(0x26); buf[k] = r0();
	    } else {
		w2(6); l = r1(); w2(4);
		w2(6); h = r1(); w2(4);
		buf[k] = j44(l,h);
	    }
	w2(4);
}
 
static void on20_write_block(  PIA *pi, char * buf, int count )
 
{	int	k;
 
	op(1); vl(1); op(0);
 
	for (k=0;k<count;k++) { w2(5); w0(buf[k]); w2(7); }
	w2(4);
}
 
static void on20_log_adapter( PIA *pi, char * scratch, int verbose )
 
{       char    *mode_string[2] = {"4-bit","8-bit"};
 
        printk("%s: on20 %s, OnSpec 90c20 at 0x%x, ",
                pi->device,ON20_VERSION,pi->port);
        printk("mode %d (%s), delay %d\n",pi->mode,
		mode_string[pi->mode],pi->delay);
 
}
 
static void on20_init_proto( PIA *pi)
 
{       MOD_INC_USE_COUNT;
}
 
static void on20_release_proto( PIA *pi)
 
{       MOD_DEC_USE_COUNT;
}
 
struct pi_protocol on20 = {"on20",0,2,2,1,1,
                           on20_write_regr,
                           on20_read_regr,
                           on20_write_block,
                           on20_read_block,
                           on20_connect,
                           on20_disconnect,
                           0,
                           0,
                           0,
                           on20_log_adapter,
                           on20_init_proto,
                           on20_release_proto
                          };
 
 
#ifdef MODULE
 
int     init_module(void)
 
{       return pi_register( &on20 ) - 1;
}
 
void    cleanup_module(void)
 
{       pi_unregister( &on20 );
}
 
#endif
 
/* end of on20.c */
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.