Subversion Repositories or1k_old

/*
 * ramdisk.c - Multiple ramdisk driver - gzip-loading version - v. 0.8 beta.
 * 
 * (C) Chad Page, Theodore Ts'o, et. al, 1995. 
 *
 * This ramdisk is designed to have filesystems created on it and mounted
 * just like a regular floppy disk.  
 *  
 * It also does something suggested by Linus: use the buffer cache as the
 * ramdisk data.  This makes it possible to dynamically allocate the ramdisk
 * buffer - with some consequences I have to deal with as I write this. 
 * 
 * This code is based on the original ramdisk.c, written mostly by
 * Theodore Ts'o (TYT) in 1991.  The code was largely rewritten by
 * Chad Page to use the buffer cache to store the ramdisk data in
 * 1995; Theodore then took over the driver again, and cleaned it up
 * for inclusion in the mainline kernel.
 *
 * The original CRAMDISK code was written by Richard Lyons, and
 * adapted by Chad Page to use the new ramdisk interface.  Theodore
 * Ts'o rewrote it so that both the compressed ramdisk loader and the
 * kernel decompressor uses the same inflate.c codebase.  The ramdisk
 * loader now also loads into a dynamic (buffer cache based) ramdisk,
 * not the old static ramdisk.  Support for the old static ramdisk has
 * been completely removed.
 *
 * Loadable module support added by Tom Dyas.
 *
 * Further cleanups by Chad Page (page0588@sundance.sjsu.edu):
 *	Cosmetic changes in #ifdef MODULE, code movement, etc...
 * 	When the ramdisk is rmmod'ed, free the protected buffers
 * 	Default ramdisk size changed to 2.88MB
 *
 *  Added initrd: Werner Almesberger & Hans Lermen, Feb '96
 *
 * 4/25/96 : Made ramdisk size a parameter (default is now 4MB) 
 *		- Chad Page
 *
 * Support added for releasing empty (all zero) blocks
 *      -- Kenneth Albanowski <kjahds@kjahds.com>
 *
 */
 
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/minix_fs.h>
#include <linux/ext2_fs.h>
#include <linux/romfs_fs.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/malloc.h>
#include <linux/ioctl.h>
#include <linux/fd.h>
#include <linux/module.h>
 
#include <asm/system.h>
#include <asm/segment.h>
#include <asm/byteorder.h> 
 
extern void wait_for_keypress(void);
 
/*
 * 35 has been officially registered as the RAMDISK major number, but
 * so is the original MAJOR number of 1.  We're using 1 in
 * include/linux/major.h for now
 */
#define MAJOR_NR RAMDISK_MAJOR
#include <linux/blk.h>
 
/* The ramdisk size is now a parameter */
#define NUM_RAMDISKS 16		/* This cannot be overridden (yet) */ 
 
#ifndef MODULE
/* We don't have to load ramdisks or gunzip them in a module... */
#define RD_LOADER
#define BUILD_CRAMDISK
 
void rd_load(void);
static int crd_load(struct file *fp, struct file *outfp);
 
#ifdef CONFIG_BLK_DEV_INITRD
static int initrd_users = 0;
#endif
#endif
 
/* Various static variables go here... mostly used within the ramdisk code only. */
 
static int rd_length[NUM_RAMDISKS];
static int rd_hardsec[NUM_RAMDISKS];
static int rd_blocksizes[NUM_RAMDISKS];
static int rd_kbsize[NUM_RAMDISKS];
 
/*
 * Parameters for the boot-loading of the ramdisk.  These are set by
 * init/main.c (from arguments to the kernel command line) or from the
 * architecture-specific setup routine (from the stored bootsector
 * information). 
 */
int rd_size = 1024;		/* Size of the ramdisks */
 
#ifndef MODULE
int rd_doload = 0;		/* 1 = load ramdisk, 0 = don't load */
int rd_prompt = 1;		/* 1 = prompt for ramdisk, 0 = don't prompt */
int rd_image_start = 0;		/* starting block # of image */
#ifdef CONFIG_BLK_DEV_INITRD
unsigned long initrd_start,initrd_end;
int mount_initrd = 1;		/* zero if initrd should not be mounted */
#endif
#endif
 
/*
 *  Basically, my strategy here is to set up a buffer-head which can't be
 *  deleted, and make that my Ramdisk.  If the request is outside of the
 *  allocated size, we must get rid of it...
 *
 */
static void rd_request(void)
{
	unsigned int minor;
	int offset, len;
 
repeat:
	INIT_REQUEST;
 
	minor = MINOR(CURRENT->rq_dev);
 
	if (minor >= NUM_RAMDISKS) {
		end_request(0);
		goto repeat;
	}
 
	offset = CURRENT->sector << 9;
	len = CURRENT->current_nr_sectors << 9;
 
	if ((offset + len) > rd_length[minor]) {
		end_request(0);
		goto repeat;
	}
 
	/*
	 * If we're reading, fill the buffer with 0's.  This is okay since
         * we're using protected buffers which should never get freed...
	 *
	 * If we're writing, we protect the buffer.
  	 */
 
#ifndef CONFIG_RD_RELEASE_BLOCKS
	if (CURRENT->cmd == READ) {
		memset(CURRENT->buffer, 0, len); 
	}
	else
		set_bit(BH_Protected, &CURRENT->bh->b_state);
#else /* CONFIG_RD_RELEASE_BLOCKS*/
 
	/* But we'll unprotect it if it's empty. */
 
	if (CURRENT->cmd == READ) {
		memset(CURRENT->buffer, 0, len); 
	}
	else
	{
		int i=0;
 
		for(i=0;i<len;i++)
			if (CURRENT->buffer[i] != 0)
				break;
 
		if (i<len) {
			set_bit(BH_Protected, &CURRENT->bh->b_state);
		}
		else {
			clear_bit(BH_Protected, &CURRENT->bh->b_state);
		}
	}
#endif /* CONFIG_RD_RELEASE_BLOCKS*/
 
	end_request(1);
	goto repeat;
} 
 
static int rd_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
	int err;
 
	if (!inode || !inode->i_rdev) 	
		return -EINVAL;
 
	switch (cmd) {
		case BLKFLSBUF:
			if (!suser()) return -EACCES;
			invalidate_buffers(inode->i_rdev);
			break;
         	case BLKGETSIZE:   /* Return device size */
			if (!arg)  return -EINVAL;
			err = verify_area(VERIFY_WRITE, (long *) arg,
					  sizeof(long));
			if (err)
				return err;
			put_user(rd_length[MINOR(inode->i_rdev)] / 512, 
				 (long *) arg);
			return 0;
 
		default:
			break;
	};
 
	return 0;
}
 
 
#ifdef CONFIG_BLK_DEV_INITRD
 
static int initrd_read(struct inode *inode,struct file *file,char *buf,
    int count)
{
	int left;
 
	left = initrd_end-initrd_start-file->f_pos;
	if (count > left) count = left;
	if (count <= 0) return 0;
	memcpy_tofs(buf,(char *) initrd_start+file->f_pos,count);
	file->f_pos += count;
	return count;
}
 
 
static void initrd_release(struct inode *inode,struct file *file)
{
	unsigned long i;
 
	if (--initrd_users) return;
	for (i = initrd_start; i < initrd_end; i += PAGE_SIZE)
		free_page(i);
	initrd_start = 0;
}
 
 
static struct file_operations initrd_fops = {
	NULL,		/* lseek */
	initrd_read,	/* read */
	NULL,		/* write */
	NULL,		/* readdir */
	NULL,		/* select */
	NULL, 		/* ioctl */
	NULL,		/* mmap */
	NULL,		/* open */
	initrd_release,	/* release */
	NULL		/* fsync */ 
};
 
#endif
 
 
static int rd_open(struct inode * inode, struct file * filp)
{
#ifdef CONFIG_BLK_DEV_INITRD
	if (DEVICE_NR(inode->i_rdev) == INITRD_MINOR) {
		if (!initrd_start) return -ENODEV;
		initrd_users++;
		filp->f_op = &initrd_fops;
		return 0;
	}
#endif
 
	if (DEVICE_NR(inode->i_rdev) >= NUM_RAMDISKS)
		return -ENXIO;
 
	MOD_INC_USE_COUNT;
 
	return 0;
}
 
#ifdef MODULE
static void rd_release(struct inode * inode, struct file * filp)
{
	MOD_DEC_USE_COUNT;
}
#endif
 
static struct file_operations fd_fops = {
	NULL,		/* lseek - default */
	block_read,	/* read - block dev read */
	block_write,	/* write - block dev write */
	NULL,		/* readdir - not here! */
	NULL,		/* select */
	rd_ioctl, 	/* ioctl */
	NULL,		/* mmap */
	rd_open,	/* open */
#ifndef MODULE
	NULL,		/* no special release code... */
#else
	rd_release,	/* module needs to decrement use count */
#endif
	block_fsync		/* fsync */ 
};
 
/* This is the registration and initialization section of the ramdisk driver */
int rd_init(void)
{
	int		i;
 
	if (register_blkdev(MAJOR_NR, "ramdisk", &fd_fops)) {
		printk("RAMDISK: Could not get major %d", MAJOR_NR);
		return -EIO;
	}
 
	blk_dev[MAJOR_NR].request_fn = &rd_request;
 
	for (i = 0; i < NUM_RAMDISKS; i++) {
		rd_length[i] = (rd_size * BLOCK_SIZE);
		rd_blocksizes[i] = BLOCK_SIZE;
		rd_hardsec[i] = BLOCK_SIZE;
		rd_kbsize[i] = rd_size; 
	}
 
	blksize_size[MAJOR_NR] = rd_blocksizes;
	hardsect_size[MAJOR_NR] = rd_hardsec;
	blk_size[MAJOR_NR] = &rd_kbsize[0];
 
	printk("Ramdisk driver initialized : %d ramdisks of %dK size\n",
							NUM_RAMDISKS, rd_size);
 
	return 0;
}
 
/* loadable module support */
 
#ifdef MODULE
 
int init_module(void)
{
	int error = rd_init();
	if (!error)
		printk(KERN_INFO "RAMDISK: Loaded as module.\n");
	return error;
}
 
/* Before freeing the module, invalidate all of the protected buffers! */
void cleanup_module(void)
{
	int i;
 
	for (i = 0 ; i < NUM_RAMDISKS; i++)
		invalidate_buffers(MKDEV(MAJOR_NR, i));
 
	unregister_blkdev( MAJOR_NR, "ramdisk" );
	blk_dev[MAJOR_NR].request_fn = 0;
}
 
#endif  /* MODULE */
 
/* End of non-loading portions of the ramdisk driver */
 
#ifdef RD_LOADER 
/*
 * This routine tries to a ramdisk image to load, and returns the
 * number of blocks to read for a non-compressed image, 0 if the image
 * is a compressed image, and -1 if an image with the right magic
 * numbers could not be found.
 *
 * We currently check for the following magic numbers:
 * 	minix
 * 	ext2
 *	romfs
 * 	gzip
 */
int
identify_ramdisk_image(kdev_t device, struct file *fp, int start_block)
{
	const int size = 512;
	struct minix_super_block *minixsb;
	struct ext2_super_block *ext2sb;
	struct romfs_super_block *romfsb;
	int nblocks = -1;
	int max_blocks;
	unsigned char *buf;
 
	buf = kmalloc(size, GFP_KERNEL);
	if (buf == 0)
		return -1;
 
	minixsb = (struct minix_super_block *) buf;
	ext2sb = (struct ext2_super_block *) buf;
	romfsb = (struct romfs_super_block *) buf;
	memset(buf, 0xe5, size);
 
	/*
	 * Read block 0 to test for gzipped kernel
	 */
	if (fp->f_op->lseek)
		fp->f_op->lseek(fp->f_inode, fp, start_block * BLOCK_SIZE, 0);
	fp->f_pos = start_block * BLOCK_SIZE;
 
	fp->f_op->read(fp->f_inode, fp, buf, size);
 
	/*
	 * If it matches the gzip magic numbers, return -1
	 */
	if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) {
		printk(KERN_NOTICE
		       "RAMDISK: Compressed image found at block %d\n",
		       start_block);
		nblocks = 0;
		goto done;
	}
 
	/* romfs is at block zero too */
	if (romfsb->word0 == ROMSB_WORD0 &&
	    romfsb->word1 == ROMSB_WORD1) {
		printk(KERN_NOTICE
		       "RAMDISK: Romfs filesystem found at block %d\n",
		       start_block);
		nblocks = (ntohl(romfsb->size)+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
		goto done;
	}
 
	/*
	 * Read block 1 to test for minix and ext2 superblock
	 */
	if (fp->f_op->lseek)
		fp->f_op->lseek(fp->f_inode, fp,
				(start_block+1) * BLOCK_SIZE, 0);
	fp->f_pos = (start_block+1) * BLOCK_SIZE;
 
	fp->f_op->read(fp->f_inode, fp, buf, size);
 
	/* Try minix */
	if (minixsb->s_magic == MINIX_SUPER_MAGIC ||
	    minixsb->s_magic == MINIX_SUPER_MAGIC2) {
		printk(KERN_NOTICE
		       "RAMDISK: Minix filesystem found at block %d\n",
		       start_block);
		nblocks = minixsb->s_nzones << minixsb->s_log_zone_size;
		goto done;
	}
 
	/* Try ext2 */
#ifndef __or1k__
	if (ext2sb->s_magic == EXT2_SUPER_MAGIC) {
		printk(KERN_NOTICE
		       "RAMDISK: Ext2 filesystem found at block %d\n",
		       start_block);
		nblocks = ext2sb->s_blocks_count;
		goto done;
	}
#else
	if (ext2sb->s_magic == cpu_to_le16(EXT2_SUPER_MAGIC)) {
                printk(KERN_NOTICE
                       "RAMDISK: ext2 filesystem found at block %d\n",
                       start_block);
                nblocks = le32_to_cpu(ext2sb->s_blocks_count);
                goto done;
        }
#endif
	printk(KERN_NOTICE
	       "RAMDISK: Couldn't find valid ramdisk image starting at %d.\n",
	       start_block);
 
done:
	if (fp->f_op->lseek)
		fp->f_op->lseek(fp->f_inode, fp, start_block * BLOCK_SIZE, 0);
	fp->f_pos = start_block * BLOCK_SIZE;	
 
	if ((nblocks > 0) && blk_size[MAJOR(device)]) {
		max_blocks = blk_size[MAJOR(device)][MINOR(device)];
		max_blocks -= start_block;
		if ((nblocks > max_blocks) && (MINOR(device) != INITRD_MINOR)) {
			printk(KERN_NOTICE
			       "RAMDISK: Restricting filesystem size "
			       "from %d to %d blocks.\n",
			       nblocks, max_blocks);
			nblocks = max_blocks;
		}
	}
	kfree(buf);
	return nblocks;
}
 
/*
 * This routine loads in the ramdisk image.
 */
static void rd_load_image(kdev_t device,int offset, int unit)
{
	struct inode inode, out_inode;
	struct file infile, outfile;
	unsigned short fs;
	kdev_t ram_device;
	int nblocks, i;
	char *buf;
	unsigned short rotate = 0;
	char rotator[4] = { '|' , '/' , '-' , '\\' };
	ram_device = MKDEV(MAJOR_NR, unit);
 
	memset(&infile, 0, sizeof(infile));
	memset(&inode, 0, sizeof(inode));
	inode.i_rdev = device;
	infile.f_mode = 1; /* read only */
	infile.f_inode = &inode;
 
	memset(&outfile, 0, sizeof(outfile));
	memset(&out_inode, 0, sizeof(out_inode));
	out_inode.i_rdev = ram_device;
	outfile.f_mode = 3; /* read/write */
	outfile.f_inode = &out_inode;
 
	if (blkdev_open(&inode, &infile) != 0) return;
	if (blkdev_open(&out_inode, &outfile) != 0) return;
 
 
	fs = get_fs();
	set_fs(KERNEL_DS);
 
	nblocks = identify_ramdisk_image(device, &infile, offset);
	if (nblocks < 0)
		goto done;
 
	if (nblocks == 0) {
#ifdef BUILD_CRAMDISK
		if (crd_load(&infile, &outfile) == 0)
			goto successful_load;
#else
		printk(KERN_NOTICE
		       "RAMDISK: Kernel does not support compressed "
		       "ramdisk images\n");
#endif
		goto done;
	}
 
	if (nblocks > (rd_length[0] >> BLOCK_SIZE_BITS)) {
		printk("RAMDISK: image too big! (%d/%d blocks)\n",
		       nblocks, rd_length[0] >> BLOCK_SIZE_BITS);
		goto done;
	}
 
	/*
	 * OK, time to copy in the data
	 */
	buf = kmalloc(BLOCK_SIZE, GFP_KERNEL);
	if (buf == 0) {
		printk(KERN_ERR "RAMDISK: could not allocate buffer\n");
		goto done;
	}
 
	printk(KERN_NOTICE "RAMDISK: Loading %d blocks into ram disk... ", nblocks);
	for (i=0; i < nblocks; i++) {
		infile.f_op->read(infile.f_inode, &infile, buf,
				  BLOCK_SIZE);
		outfile.f_op->write(outfile.f_inode, &outfile, buf,
				    BLOCK_SIZE);
		if (!(i % 16)) {
			printk("%c\b", rotator[rotate & 0x3]);
			rotate++;
		}
	}
	printk("done.\n");
	kfree(buf);
 
successful_load:
	invalidate_buffers(device);
	ROOT_DEV = MKDEV(MAJOR_NR,unit);
 
done:
	if (infile.f_op->release)
		infile.f_op->release(&inode, &infile);
	set_fs(fs);
}
 
 
static void rd_load_disk(int n)
{
#ifdef CONFIG_BLK_DEV_INITRD
	extern kdev_t real_root_dev;
#endif	
 
	if (rd_doload == 0)
		return;
 
	if (MAJOR(ROOT_DEV) != FLOPPY_MAJOR
#ifdef CONFIG_BLK_DEV_INITRD	
		&& MAJOR(real_root_dev) != FLOPPY_MAJOR
#endif		
	)
			return;
 
	if (rd_prompt) {
#ifdef CONFIG_BLK_DEV_FD
		floppy_eject();
#endif
		printk(KERN_NOTICE
		       "VFS: Insert root floppy disk to be loaded into ramdisk and press ENTER\n");
		wait_for_keypress();
	}
 
	rd_load_image(ROOT_DEV,rd_image_start,n);
 
}
 
void rd_load(void)
{
	rd_load_disk(0);
}
 
void rd_load_secondary(void)
{
	rd_load_disk(1);
}
 
#ifdef CONFIG_BLK_DEV_INITRD
void initrd_load(void)
{
	rd_load_image(MKDEV(MAJOR_NR, INITRD_MINOR),0,0);
}
#endif
 
#endif /* RD_LOADER */
 
#ifdef BUILD_CRAMDISK
 
/*
 * gzip declarations
 */
 
#define OF(args)  args
 
#define memzero(s, n)     memset ((s), 0, (n))
 
 
typedef unsigned char  uch;
typedef unsigned short ush;
typedef unsigned long  ulg;
 
#define INBUFSIZ 4096
#define WSIZE 0x8000    /* window size--must be a power of two, and */
			/*  at least 32K for zip's deflate method */
 
static uch *inbuf;
static uch *window;
 
static unsigned insize = 0;  /* valid bytes in inbuf */
static unsigned inptr = 0;   /* index of next byte to be processed in inbuf */
static unsigned outcnt = 0;  /* bytes in output buffer */
static int exit_code = 0;
static long bytes_out = 0;
static struct file *crd_infp, *crd_outfp;
 
#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
 
/* Diagnostic functions (stubbed out) */
#define Assert(cond,msg)
#define Trace(x)
#define Tracev(x)
#define Tracevv(x)
#define Tracec(c,x)
#define Tracecv(c,x)
 
#define STATIC static
 
static int  fill_inbuf(void);
static void flush_window(void);
static void *malloc(int size);
static void free(void *where);
static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
 
#include "../../lib/inflate.c"
 
static void *malloc(int size)
{
	return kmalloc(size, GFP_KERNEL);
}
 
static void free(void *where)
{
	kfree(where);
}
 
static void gzip_mark(void **ptr)
{
}
 
static void gzip_release(void **ptr)
{
}
 
 
/* ===========================================================================
 * Fill the input buffer. This is called only when the buffer is empty
 * and at least one byte is really needed.
 */
static int fill_inbuf()
{
	if (exit_code) return -1;
 
	insize = crd_infp->f_op->read(crd_infp->f_inode, crd_infp,
				      inbuf, INBUFSIZ);
	if (insize == 0) return -1;
 
	inptr = 1;
 
	return inbuf[0];
}
 
/* ===========================================================================
 * Write the output window window[0..outcnt-1] and update crc and bytes_out.
 * (Used for the decompressed data only.)
 */
static void flush_window()
{
    ulg c = crc;         /* temporary variable */
    unsigned n;
    uch *in, ch;
 
    crd_outfp->f_op->write(crd_outfp->f_inode, crd_outfp, window,
			   outcnt);
    in = window;
    for (n = 0; n < outcnt; n++) {
	    ch = *in++;
	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
    }
    crc = c;
    bytes_out += (ulg)outcnt;
    outcnt = 0;
}
 
static void error(char *x)
{
	printk(KERN_ERR "%s", x);
	exit_code = 1;
}
 
static int
crd_load(struct file * fp, struct file *outfp)
{
	int result;
 
	insize = 0;  /* valid bytes in inbuf */
	inptr = 0;   /* index of next byte to be processed in inbuf */
	outcnt = 0;  /* bytes in output buffer */
	exit_code = 0;
	bytes_out = 0;
	crc = 0xFFFFFFFF;
 
	crd_infp = fp;
	crd_outfp = outfp;
	inbuf = kmalloc(INBUFSIZ, GFP_KERNEL);
	if (inbuf == 0) {
		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n");
		return -1;
	}
	window = kmalloc(WSIZE, GFP_KERNEL);
	if (window == 0) {
		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n");
		kfree(inbuf);
		return -1;
	}
	makecrc();
	result = gunzip();
	kfree(inbuf);
	kfree(window);
	return result;
}
 
#endif  /* BUILD_CRAMDISK */