Subversion Repositories or1k_old

/*
 * sound/trix.c
 *
 * Low level driver for the MediaTrix AudioTrix Pro
 * (MT-0002-PC Control Chip)
 */
/*
 * Copyright (C) by Hannu Savolainen 1993-1996
 *
 * USS/Lite for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
 * Version 2 (June 1991). See the "COPYING" file distributed with this software
 * for more info.
 */
#include <linux/config.h>
 
 
#include "sound_config.h"
#include "sb.h"
 
#if defined(CONFIG_TRIX)
 
#ifdef INCLUDE_TRIX_BOOT
#include "trix_boot.h"
#else
static unsigned char *trix_boot = NULL;
static int      trix_boot_len = 0;
 
#endif
 
 
static int      kilroy_was_here = 0;	/* Don't detect twice */
static int      sb_initialized = 0;
static int      mpu_initialized = 0;
 
static int     *trix_osp = NULL;
 
static unsigned char
trix_read (int addr)
{
  outb ((unsigned char) addr, 0x390);	/* MT-0002-PC ASIC address */
  return inb (0x391);		/* MT-0002-PC ASIC data */
}
 
static void
trix_write (int addr, int data)
{
  outb ((unsigned char) addr, 0x390);	/* MT-0002-PC ASIC address */
  outb ((unsigned char) data, 0x391);	/* MT-0002-PC ASIC data */
}
 
static void
download_boot (int base)
{
  int             i = 0, n = trix_boot_len;
 
  if (trix_boot_len == 0)
    return;
 
  trix_write (0xf8, 0x00);	/* ??????? */
  outb (0x01, base + 6);	/* Clear the internal data pointer */
  outb (0x00, base + 6);	/* Restart */
 
  /*
     *  Write the boot code to the RAM upload/download register.
     *  Each write increments the internal data pointer.
   */
  outb (0x01, base + 6);	/* Clear the internal data pointer */
  outb (0x1A, 0x390);		/* Select RAM download/upload port */
 
  for (i = 0; i < n; i++)
    outb (trix_boot[i], 0x391);
  for (i = n; i < 10016; i++)	/* Clear up to first 16 bytes of data RAM */
    outb (0x00, 0x391);
  outb (0x00, base + 6);	/* Reset */
  outb (0x50, 0x390);		/* ?????? */
 
}
 
static int
trix_set_wss_port (struct address_info *hw_config)
{
  unsigned char   addr_bits;
 
  if (check_region (0x390, 2))
    {
      printk ("AudioTrix: Config port I/O conflict\n");
      return 0;
    }
 
  if (kilroy_was_here)		/* Already initialized */
    return 0;
 
  if (trix_read (0x15) != 0x71)	/* No ASIC signature */
    {
      DDB (printk ("No AudioTrix ASIC signature found\n"));
      return 0;
    }
 
  kilroy_was_here = 1;
 
  /*
   * Reset some registers.
   */
 
  trix_write (0x13, 0);
  trix_write (0x14, 0);
 
  /*
     * Configure the ASIC to place the codec to the proper I/O location
   */
 
  switch (hw_config->io_base)
    {
    case 0x530:
      addr_bits = 0;
      break;
    case 0x604:
      addr_bits = 1;
      break;
    case 0xE80:
      addr_bits = 2;
      break;
    case 0xF40:
      addr_bits = 3;
      break;
    default:
      return 0;
    }
 
  trix_write (0x19, (trix_read (0x19) & 0x03) | addr_bits);
  return 1;
}
 
/*
 *    Probe and attach routines for the Windows Sound System mode of
 *      AudioTrix Pro
 */
 
int
probe_trix_wss (struct address_info *hw_config)
{
  int             ret;
 
  /*
     * Check if the IO port returns valid signature. The original MS Sound
     * system returns 0x04 while some cards (AudioTrix Pro for example)
     * return 0x00.
   */
  if (check_region (hw_config->io_base, 8))
    {
      printk ("AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
      return 0;
    }
 
  trix_osp = hw_config->osp;
 
  if (!trix_set_wss_port (hw_config))
    return 0;
 
  if ((inb (hw_config->io_base + 3) & 0x3f) != 0x00)
    {
      DDB (printk ("No MSS signature detected on port 0x%x\n", hw_config->io_base));
      return 0;
    }
 
  if (hw_config->irq > 11)
    {
      printk ("AudioTrix: Bad WSS IRQ %d\n", hw_config->irq);
      return 0;
    }
 
  if (hw_config->dma != 0 && hw_config->dma != 1 && hw_config->dma != 3)
    {
      printk ("AudioTrix: Bad WSS DMA %d\n", hw_config->dma);
      return 0;
    }
 
  if (hw_config->dma2 != -1)
    if (hw_config->dma2 != 0 && hw_config->dma2 != 1 && hw_config->dma2 != 3)
      {
	printk ("AudioTrix: Bad capture DMA %d\n", hw_config->dma2);
	return 0;
      }
 
  /*
     * Check that DMA0 is not in use with a 8 bit board.
   */
 
  if (hw_config->dma == 0 && inb (hw_config->io_base + 3) & 0x80)
    {
      printk ("AudioTrix: Can't use DMA0 with a 8 bit card\n");
      return 0;
    }
 
  if (hw_config->irq > 7 && hw_config->irq != 9 && inb (hw_config->io_base + 3) & 0x80)
    {
      printk ("AudioTrix: Can't use IRQ%d with a 8 bit card\n", hw_config->irq);
      return 0;
    }
 
  ret = ad1848_detect (hw_config->io_base + 4, NULL, hw_config->osp);
 
  if (ret)
    request_region (0x390, 2, "AudioTrix");
 
  return ret;
}
 
void
attach_trix_wss (struct address_info *hw_config)
{
  static unsigned char interrupt_bits[12] =
  {0, 0, 0, 0, 0, 0, 0, 0x08, 0, 0x10, 0x18, 0x20};
  char            bits;
 
  static unsigned char dma_bits[4] =
  {1, 2, 0, 3};
 
  int             config_port = hw_config->io_base + 0;
  int             dma1 = hw_config->dma, dma2 = hw_config->dma2;
 
  trix_osp = hw_config->osp;
 
  if (!kilroy_was_here)
    {
      DDB (printk ("AudioTrix: Attach called but not probed yet???\n"));
      return;
    }
 
  /*
     * Set the IRQ and DMA addresses.
   */
 
  bits = interrupt_bits[hw_config->irq];
  if (bits == 0)
    {
      printk ("AudioTrix: Bad IRQ (%d)\n", hw_config->irq);
      return;
    }
 
  outb (bits | 0x40, config_port);
 
  if (hw_config->dma2 == -1 || hw_config->dma2 == hw_config->dma)
    {
      bits |= dma_bits[dma1];
      dma2 = dma1;
    }
  else
    {
      unsigned char   tmp;
 
      tmp = trix_read (0x13) & ~30;
      trix_write (0x13, tmp | 0x80 | (dma1 << 4));
 
      tmp = trix_read (0x14) & ~30;
      trix_write (0x14, tmp | 0x80 | (dma2 << 4));
    }
 
  outb (bits, config_port);	/* Write IRQ+DMA setup */
 
  ad1848_init ("AudioTrix Pro", hw_config->io_base + 4,
	       hw_config->irq,
	       dma1,
	       dma2,
	       0,
	       hw_config->osp);
  request_region (hw_config->io_base, 4, "MSS config");
}
 
int
probe_trix_sb (struct address_info *hw_config)
{
 
  int             tmp;
  unsigned char   conf;
  static char     irq_translate[] =
  {-1, -1, -1, 0, 1, 2, -1, 3};
 
  if (trix_boot_len == 0)
    return 0;			/* No boot code -> no fun */
 
  if (!kilroy_was_here)
    return 0;			/* AudioTrix Pro has not been detected earlier */
 
  if (sb_initialized)
    return 0;
 
  if (check_region (hw_config->io_base, 16))
    {
      printk ("AudioTrix: SB I/O port conflict (%x)\n", hw_config->io_base);
      return 0;
    }
 
  if ((hw_config->io_base & 0xffffff8f) != 0x200)
    return 0;
 
  tmp = hw_config->irq;
  if (tmp > 7)
    return 0;
  if (irq_translate[tmp] == -1)
    return 0;
 
  tmp = hw_config->dma;
  if (tmp != 1 && tmp != 3)
    return 0;
 
  conf = 0x84;			/* DMA and IRQ enable */
  conf |= hw_config->io_base & 0x70;	/* I/O address bits */
  conf |= irq_translate[hw_config->irq];
  if (hw_config->dma == 3)
    conf |= 0x08;
  trix_write (0x1b, conf);
 
  download_boot (hw_config->io_base);
  sb_initialized = 1;
 
  hw_config->name = "AudioTrix SB";
#ifdef CONFIG_SBDSP
  return probe_sb (hw_config);
#else
  return 0;
#endif
}
 
void
attach_trix_sb (struct address_info *hw_config)
{
#ifdef CONFIG_SBDSP
  hw_config->driver_use_1 = SB_NO_MIDI | SB_NO_MIXER | SB_NO_RECORDING;
  attach_sb_card (hw_config);
#endif
}
 
void
attach_trix_mpu (struct address_info *hw_config)
{
#if defined(CONFIG_UART401) && defined(CONFIG_MIDI)
  hw_config->name = "AudioTrix Pro";
  attach_uart401 (hw_config);
#endif
}
 
int
probe_trix_mpu (struct address_info *hw_config)
{
#if defined(CONFIG_UART401) && defined(CONFIG_MIDI)
  unsigned char   conf;
  static char     irq_bits[] =
  {-1, -1, -1, 1, 2, 3, -1, 4, -1, 5};
 
  if (!kilroy_was_here)
    {
      DDB (printk ("Trix: WSS and SB modes must be initialized before MPU\n"));
      return 0;			/* AudioTrix Pro has not been detected earlier */
    }
 
  if (!sb_initialized)
    {
      DDB (printk ("Trix: SB mode must be initialized before MPU\n"));
      return 0;
    }
 
  if (mpu_initialized)
    {
      DDB (printk ("Trix: MPU mode already initialized\n"));
      return 0;
    }
 
  if (check_region (hw_config->io_base, 4))
    {
      printk ("AudioTrix: MPU I/O port conflict (%x)\n", hw_config->io_base);
      return 0;
    }
 
  if (hw_config->irq > 9)
    {
      printk ("AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
      return 0;
    }
 
  if (irq_bits[hw_config->irq] == -1)
    {
      printk ("AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
      return 0;
    }
 
  switch (hw_config->io_base)
    {
    case 0x330:
      conf = 0x00;
      break;
    case 0x370:
      conf = 0x04;
      break;
    case 0x3b0:
      conf = 0x08;
      break;
    case 0x3f0:
      conf = 0x0c;
      break;
    default:
      return 0;			/* Invalid port */
    }
 
  conf |= irq_bits[hw_config->irq] << 4;
 
  trix_write (0x19, (trix_read (0x19) & 0x83) | conf);
 
  mpu_initialized = 1;
 
  return probe_uart401 (hw_config);
#else
  return 0;
#endif
}
 
void
unload_trix_wss (struct address_info *hw_config)
{
  int             dma2 = hw_config->dma2;
 
  if (dma2 == -1)
    dma2 = hw_config->dma;
 
  release_region (0x390, 2);
  release_region (hw_config->io_base, 4);
 
  ad1848_unload (hw_config->io_base + 4,
		 hw_config->irq,
		 hw_config->dma,
		 dma2,
		 0);
}
 
void
unload_trix_mpu (struct address_info *hw_config)
{
#if defined(CONFIG_UART401) && defined(CONFIG_MIDI)
  unload_uart401 (hw_config);
#endif
}
void
unload_trix_sb (struct address_info *hw_config)
{
#ifdef CONFIG_SBDSP
  unload_sb (hw_config);
#endif
}
 
 
#endif