URL
https://opencores.org/ocsvn/or1k_old/or1k_old/trunk
Subversion Repositories or1k_old
[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [net/] [ipv4/] [tcp_input.c] - Rev 1782
Compare with Previous | Blame | View Log
/* * INET An implementation of the TCP/IP protocol suite for the LINUX * operating system. INET is implemented using the BSD Socket * interface as the means of communication with the user level. * * Implementation of the Transmission Control Protocol(TCP). * * Version: @(#)tcp_input.c 1.0.16 05/25/93 * * Authors: Ross Biro, <bir7@leland.Stanford.Edu> * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> * Mark Evans, <evansmp@uhura.aston.ac.uk> * Corey Minyard <wf-rch!minyard@relay.EU.net> * Florian La Roche, <flla@stud.uni-sb.de> * Charles Hedrick, <hedrick@klinzhai.rutgers.edu> * Linus Torvalds, <torvalds@cs.helsinki.fi> * Alan Cox, <gw4pts@gw4pts.ampr.org> * Matthew Dillon, <dillon@apollo.west.oic.com> * Arnt Gulbrandsen, <agulbra@nvg.unit.no> * Jorge Cwik, <jorge@laser.satlink.net> * * FIXES * Pedro Roque : Double ACK bug * Eric Schenk : Fixes to slow start algorithm. * Eric Schenk : Yet another double ACK bug. * Eric Schenk : Delayed ACK bug fixes. * Eric Schenk : Floyd style fast retrans war avoidance. * Eric Schenk : Skip fast retransmit on small windows. * Eric Schenk : Fixes to retransmission code to * : avoid extra retransmission. * Theodore Ts'o : Do secure TCP sequence numbers. * Eric Schenk : SYN and RST cookies for dealing * : with SYN flooding attacks. * David S. Miller : New socket lookup architecture for ISS. * This code is dedicated to John Dyson. * Elliot Poger : Added support for SO_BINDTODEVICE. * Willy Konynenberg : Transparent proxy adapted to new * socket hash code. * J Hadi Salim : We assumed that some idiot wasnt going * Alan Cox to idly redefine bits of ToS in an * experimental protocol for other things * (ECN) - wrong!. Mask the bits off. Note * masking the bits if they dont use ECN * then use it for ToS is even more * broken. * </RANT> * George Baeslack : SIGIO delivery on accept() bug that * affected sun jdk. */ #include <linux/config.h> #include <linux/types.h> #include <linux/random.h> #include <net/tcp.h> /* * Do we assume the IP ToS is entirely for its intended purpose */ #define TOS_VALID_MASK(x) ((x)&0x3F) /* * Policy code extracted so it's now separate */ /* * Called each time to estimate the delayed ack timeout. This is * how it should be done so a fast link isn't impacted by ack delay. */ extern __inline__ void tcp_delack_estimator(struct sock *sk) { /* * Delayed ACK time estimator. */ if (sk->lrcvtime == 0) { sk->lrcvtime = jiffies; sk->ato = HZ/3; } else { int m; m = jiffies - sk->lrcvtime; sk->lrcvtime = jiffies; if (m <= 0) m = 1; /* This used to test against sk->rtt. * On a purely receiving link, there is no rtt measure. * The result is that we lose delayed ACKs on one-way links. * Therefore we test against sk->rto, which will always * at least have a default value. */ if (m > sk->rto) { sk->ato = sk->rto; /* * printk(KERN_DEBUG "ato: rtt %lu\n", sk->ato); */ } else { /* * Very fast acting estimator. * May fluctuate too much. Probably we should be * doing something like the rtt estimator here. */ sk->ato = (sk->ato >> 1) + m; /* * printk(KERN_DEBUG "ato: m %lu\n", sk->ato); */ } } } /* * Called on frames that were known _not_ to have been * retransmitted [see Karn/Partridge Proceedings SIGCOMM 87]. * The algorithm is from the SIGCOMM 88 piece by Van Jacobson. */ extern __inline__ void tcp_rtt_estimator(struct sock *sk, struct sk_buff *oskb) { long m; /* * The following amusing code comes from Jacobson's * article in SIGCOMM '88. Note that rtt and mdev * are scaled versions of rtt and mean deviation. * This is designed to be as fast as possible * m stands for "measurement". */ m = jiffies - oskb->when; /* RTT */ if (sk->rtt != 0) { if(m<=0) m=1; /* IS THIS RIGHT FOR <0 ??? */ m -= (sk->rtt >> 3); /* m is now error in rtt est */ sk->rtt += m; /* rtt = 7/8 rtt + 1/8 new */ if (m < 0) m = -m; /* m is now abs(error) */ m -= (sk->mdev >> 2); /* similar update on mdev */ sk->mdev += m; /* mdev = 3/4 mdev + 1/4 new */ } else { /* no previous measure. */ sk->rtt = m<<3; /* take the measured time to be rtt */ sk->mdev = m<<1; /* make sure rto = 3*rtt */ } /* * Now update timeout. Note that this removes any backoff. */ /* Jacobson's algorithm calls for rto = R + 4V. * We diverge from Jacobson's algorithm here. See the commentary * in tcp_ack to understand why. */ sk->rto = (sk->rtt >> 3) + sk->mdev; sk->rto += (sk->rto>>2) + (sk->rto >> (sk->cong_window-1)); if (sk->rto > 120*HZ) sk->rto = 120*HZ; if (sk->rto < HZ/5) /* Was 1*HZ - keep .2 as minimum cos of the BSD delayed acks */ sk->rto = HZ/5; sk->backoff = 0; } #if defined(CONFIG_RST_COOKIES) /* * This code needs to be a bit more clever. * Does 300 second timeouts now. Still just a circular buffer. * At most 32 validations stored. New validations are ignored * if all 32 validations are currently valid. To do otherwise * allows a situation in which clearances are forgotten before * they can be used (provided valid traffic is coming fast enough). * The buffer should really be as long as the number of valid * connections we want to accept in an 300 second period. * 32 is maybe to small. On the other hand, the validation check * algorithm has to walk the whole table, which is also stupid. * It would be better to have a combined hash/circular buffer. * The hash could be used with chaining for fast lookup. * Really this is probably an argument against using RST cookies * at all, since they take up space for the clearances. */ static struct { u32 saddr; unsigned long tstamp; } clearances[32] = { {0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0}, {0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0}, {0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0}, {0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0},{0,0}}; static next_clearance = 0; /* Does the address saddr have an active security clearance? */ int tcp_clearance(__u32 saddr) { int i; for (i = 0; i < 32; i++) if (clearances[i].saddr == saddr && clearances[i].tstamp > jiffies-HZ*300) return 1; return 0; } void add_clearance(__u32 saddr) { /* * If expired then we can add a new entry. */ if (clearances[next_clearance].tstamp <= jiffies-HZ*300) { clearances[next_clearance].saddr = saddr; clearances[next_clearance].tstamp = jiffies; next_clearance = (next_clearance+1)%32; } } #endif #ifdef CONFIG_SYN_COOKIES /* * MTU values we can represent in fall back mode. * These values are partially borrowed from Jeff Weisberg's SunOS * implementation of SYNCOOKIES. I have added an extra limiting * value of 64 to deal with the case of very small MTU values. * (e.g. long delay packet radio links, 1200 baud modems.) */ static __u32 cookie_mtu[8] = { 64, 256, 512, 536, 1024, 1440, 1460, 4312 }; unsigned int ui_c_send_cookies = 0; #endif extern void tcp_v4_hash(struct sock *sk); extern void tcp_v4_unhash(struct sock *sk); extern void tcp_v4_rehash(struct sock *sk); /* Don't inline this cruft. Here are some nice properties to * exploit here. The BSD API does not allow a listening TCP * to specify the remote port nor the remote address for the * connection. So always assume those are both wildcarded * during the search since they can never be otherwise. */ static struct sock *tcp_v4_lookup_longway(u32 daddr, unsigned short hnum, struct device *dev) { struct sock *sk = tcp_listening_hash[tcp_lhashfn(hnum)]; struct sock *result = NULL; int score, hiscore = 0; for(; sk; sk = sk->next) { if(sk->num == hnum) { __u32 rcv_saddr = sk->rcv_saddr; score = 1; /* If this socket is bound to a particular IP address, * does the dest IPaddr of the packet match it? */ if(rcv_saddr) { if(rcv_saddr != daddr) continue; score++; } /* If this socket is bound to a particular interface, * did the packet come in on it? */ if (sk->bound_device) { if (dev != sk->bound_device) continue; score++; } /* Check the score--max is 3. */ if (score == 3) return sk; /* Best possible match. */ if (score > hiscore) { hiscore = score; result = sk; } } } return result; } /* Sockets in TCP_CLOSE state are _always_ taken out of the hash, so * we need not check it for TCP lookups anymore, thanks Alexey. -DaveM */ static inline struct sock *__tcp_v4_lookup(struct tcphdr *th, u32 saddr, u16 sport, u32 daddr, u16 dport, struct device *dev) { unsigned short hnum = ntohs(dport); struct sock *sk; /* Optimize here for direct hit, only listening connections can * have wildcards anyways. It is assumed that this code only * gets called from within NET_BH. */ sk = tcp_established_hash[tcp_hashfn(daddr, hnum, saddr, sport)]; for(; sk; sk = sk->next) if(sk->daddr == saddr && /* remote address */ sk->dummy_th.dest == sport && /* remote port */ sk->num == hnum && /* local port */ sk->rcv_saddr == daddr && /* local address */ ((sk->bound_device==NULL) || (sk->bound_device==dev)) ) goto hit; /* You sunk my battleship! */ sk = tcp_v4_lookup_longway(daddr, hnum, dev); hit: return sk; } __inline__ struct sock *tcp_v4_lookup(u32 saddr, u16 sport, u32 daddr, u16 dport, struct device *dev) { return __tcp_v4_lookup(0, saddr, sport, daddr, dport, dev); } #ifdef CONFIG_IP_TRANSPARENT_PROXY /* I am not entirely sure this is fully equivalent to the old lookup code, but it does * look reasonable. WFK */ struct sock *tcp_v4_proxy_lookup(u32 saddr, u16 sport, u32 daddr, u16 dport, u32 paddr, u16 rport, struct device *dev) { unsigned short hnum = ntohs(dport); unsigned short hrnum = ntohs(rport); struct sock *sk; /* Optimize here for direct hit, only listening connections can * have wildcards anyways. It is assumed that this code only * gets called from within NET_BH. */ sk = tcp_established_hash[tcp_hashfn(daddr, hnum, saddr, sport)]; for(; sk; sk = sk->next) if(sk->daddr == saddr && /* remote address */ sk->dummy_th.dest == sport && /* remote port */ sk->num == hnum && /* local port */ sk->rcv_saddr == daddr && /* local address */ ((sk->bound_device==NULL) || (sk->bound_device==dev)) ) goto hit; /* You sunk my battleship! */ /* If we don't match on a bound socket, try to find one explicitly listening * on the remote address (a proxy bind). */ sk = tcp_v4_lookup_longway(daddr, hnum, dev); /* If that didn't yield an exact match, look for a socket listening on the * redirect port. */ if (!sk || sk->rcv_saddr != daddr) { sk = tcp_v4_lookup_longway(paddr, hrnum, dev); } hit: return sk; } #endif /* * React to a out-of-window TCP sequence number in an incoming packet */ static void bad_tcp_sequence(struct sock *sk, struct tcphdr *th, u32 end_seq, struct device *dev) { if (th->rst) return; /* * Send a reset if we get something not ours and we are * unsynchronized. Note: We don't do anything to our end. We * are just killing the bogus remote connection then we will * connect again and it will work (with luck). */ if (sk->state==TCP_SYN_SENT || sk->state==TCP_SYN_RECV) { tcp_send_reset(sk->saddr,sk->daddr,th,sk->prot,NULL,dev,0,255); return; } /* * This packet is old news. Usually this is just a resend * from the far end, but sometimes it means the far end lost * an ACK we sent, so we better send an ACK. */ /* * BEWARE! Unconditional answering by ack to out-of-window ack * can result in infinite exchange of empty acks. * This check cures bug, found by Michiel Boland, but * not another possible cases. * If we are in TCP_TIME_WAIT, we have already received * FIN, so that our peer need not window update. If our * ACK were lost, peer would retransmit his FIN anyway. --ANK */ if (sk->state != TCP_TIME_WAIT || ntohl(th->seq) != end_seq) tcp_send_ack(sk); } /* * This functions checks to see if the tcp header is actually acceptable. */ extern __inline__ int tcp_sequence(struct sock *sk, u32 seq, u32 end_seq) { u32 end_window = sk->lastwin_seq + sk->window; return /* if start is at end of window, end must be too (zero window) */ (seq == end_window && seq == end_seq) || /* if start is before end of window, check for interest */ (before(seq, end_window) && !before(end_seq, sk->acked_seq)); } /* * When we get a reset we do this. This probably is a tcp_output routine * really. */ static int tcp_reset(struct sock *sk, struct sk_buff *skb) { sk->zapped = 1; /* * We want the right error as BSD sees it (and indeed as we do). */ switch (sk->state) { case TCP_TIME_WAIT: break; case TCP_SYN_SENT: sk->err = ECONNREFUSED; break; case TCP_CLOSE_WAIT: sk->err = EPIPE; break; default: sk->err = ECONNRESET; } #ifdef CONFIG_TCP_RFC1337 /* * Time wait assassination protection [RFC1337] * * This is a good idea, but causes more sockets to take time to close. * * Ian Heavens has since shown this is an inadequate fix for the protocol * bug in question. */ if(sk->state!=TCP_TIME_WAIT) { tcp_set_state(sk,TCP_CLOSE); sk->shutdown = SHUTDOWN_MASK; } #else tcp_set_state(sk,TCP_CLOSE); sk->shutdown = SHUTDOWN_MASK; #endif if (!sk->dead) sk->state_change(sk); kfree_skb(skb, FREE_READ); return(0); } /* * Look for tcp options. Parses everything but only knows about MSS. * This routine is always called with the packet containing the SYN. * However it may also be called with the ack to the SYN. So you * can't assume this is always the SYN. It's always called after * we have set up sk->mtu to our own MTU. * * We need at minimum to add PAWS support here. Possibly large windows * as Linux gets deployed on 100Mb/sec networks. */ static void tcp_options(struct sock *sk, struct tcphdr *th) { unsigned char *ptr; int length=(th->doff*4)-sizeof(struct tcphdr); int mss_seen = 0; ptr = (unsigned char *)(th + 1); while(length>0) { int opcode=*ptr++; int opsize=*ptr++; switch(opcode) { case TCPOPT_EOL: goto ende; case TCPOPT_NOP: /* Ref: RFC 793 section 3.1 */ length--; ptr--; /* the opsize=*ptr++ above was a mistake */ continue; default: if(opsize<=2) /* Avoid silly options looping forever */ goto ende; switch(opcode) { case TCPOPT_MSS: if(opsize==4 && th->syn) { sk->mtu=min(sk->mtu,ntohs(*(unsigned short *)ptr)); mss_seen = 1; } break; /* Add other options here as people feel the urge to implement stuff like large windows */ } ptr+=opsize-2; length-=opsize; } } ende: if (th->syn) { if (! mss_seen) sk->mtu=min(sk->mtu, 536); /* default MSS if none sent */ } #ifdef CONFIG_INET_PCTCP sk->mss = min(sk->max_window >> 1, sk->mtu); #else sk->mss = min(sk->max_window, sk->mtu); sk->max_unacked = 2 * sk->mss; #endif } /* * This routine handles a connection request. * It should make sure we haven't already responded. * Because of the way BSD works, we have to send a syn/ack now. * This also means it will be harder to close a socket which is * listening. */ static void tcp_conn_request(struct sock *sk, struct sk_buff *skb, u32 daddr, u32 saddr, struct options *opt, struct device *dev, u32 seq) { struct sock *newsk; struct tcphdr *th; struct rtable *rt; #ifdef CONFIG_SYN_COOKIES int send_cookie = 0; #endif th = skb->h.th; /* If the socket is dead, don't accept the connection. */ if (!sk->dead) { /* * This must wait for 3 way completion. * sk->data_ready(sk,0); */ } else { if(sk->debug) printk("Reset on %p: Connect on dead socket.\n",sk); tcp_send_reset(daddr, saddr, th, sk->prot, opt, dev, 0,255); tcp_statistics.TcpAttemptFails++; kfree_skb(skb, FREE_READ); return; } /* * Make sure we can accept more. This will prevent a * flurry of syns from eating up all our memory. * * BSD does some funnies here and allows 3/2 times the * set backlog as a fudge factor. That's just too gross. * * Well, now I'm making things even grosser for dealing * with SYNACK flooding. */ if (sk->ack_backlog >= sk->max_ack_backlog) { #if defined(CONFIG_RST_COOKIES) || defined(CONFIG_SYN_COOKIES) static unsigned long warning_time = 0; /* We may be experiencing SYNACK flooding. * We now must decide if we should accept this connection. * If we have a security clearance for the incoming * packet, i.e. it is from a location we where talking * to succesfully recently, or that has responded to * a security probe, then we go ahead and deal normally, * accepting up to 2*max in the backlog. * Otherwise, we send out either an RST security probe * or a SYN cookie, or both. (depending on configuration). * Note that we send out a cookie even if the backlog * is full up to 2*max, since the backlog may clear * by the time we get a response. * WARNING: This code changes the semantics of the backlog * a bit. I'm not entirely sure this is the right thing * to do here. */ extern void tcp_send_synack_probe(unsigned long saddr, unsigned long daddr, struct tcphdr *th, struct proto *prot, struct options *opt, struct device *dev, int tos, int ttl); #ifdef CONFIG_RST_COOKIES if (!tcp_clearance(saddr)) { #endif /* Only let this warning get printed once a minute. */ if (jiffies - warning_time > HZ*60) { warning_time = jiffies; printk(KERN_INFO "Warning: possible SYN flood from %d.%d.%d.%d on %d.%d.%d.%d:%d. Sending cookies.\n", NIPQUAD(saddr), NIPQUAD(daddr), ntohs(th->dest)); } #ifdef CONFIG_RST_COOKIES tcp_send_synack_probe(daddr, saddr, th, &tcp_prot, opt, dev, skb->ip_hdr->tos, 255); #endif #ifdef CONFIG_SYN_COOKIES send_cookie = 1; ui_c_send_cookies++; #else /* If we only have RST cookies we should * not drop through to the rest of the response code. */ kfree_skb(skb, FREE_READ); return; #endif #ifdef CONFIG_RST_COOKIES } else if (sk->ack_backlog >= 2*sk->max_ack_backlog) { tcp_statistics.TcpAttemptFails++; kfree_skb(skb, FREE_READ); return; } #endif #else tcp_statistics.TcpAttemptFails++; kfree_skb(skb, FREE_READ); return; #endif } /* * We need to build a new sock struct. * It is sort of bad to have a socket without an inode attached * to it, but the wake_up's will just wake up the listening socket, * and if the listening socket is destroyed before this is taken * off of the queue, this will take care of it. */ newsk = (struct sock *) kmalloc(sizeof(struct sock), GFP_ATOMIC); if (newsk == NULL) { /* just ignore the syn. It will get retransmitted. */ tcp_statistics.TcpAttemptFails++; kfree_skb(skb, FREE_READ); return; } memcpy(newsk, sk, sizeof(*newsk)); /* Or else we die! -DaveM */ newsk->sklist_next = NULL; /* and die again -- erics */ newsk->pprev = NULL; newsk->opt = NULL; newsk->ip_route_cache = NULL; if (opt && opt->optlen) { sk->opt = (struct options*)kmalloc(sizeof(struct options)+opt->optlen, GFP_ATOMIC); if (!sk->opt) { kfree_s(newsk, sizeof(struct sock)); tcp_statistics.TcpAttemptFails++; kfree_skb(skb, FREE_READ); return; } if (ip_options_echo(sk->opt, opt, daddr, saddr, skb)) { kfree_s(sk->opt, sizeof(struct options)+opt->optlen); kfree_s(newsk, sizeof(struct sock)); tcp_statistics.TcpAttemptFails++; kfree_skb(skb, FREE_READ); return; } } skb->when = jiffies; /* For timeout */ skb_queue_head_init(&newsk->write_queue); skb_queue_head_init(&newsk->receive_queue); newsk->send_head = NULL; newsk->send_tail = NULL; newsk->send_next = NULL; skb_queue_head_init(&newsk->back_log); newsk->rtt = 0; newsk->rto = TCP_TIMEOUT_INIT; newsk->mdev = TCP_TIMEOUT_INIT; newsk->max_window = 32; /* It cannot be left at zero. -DaveM */ /* * See draft-stevens-tcpca-spec-01 for discussion of the * initialization of these values. */ newsk->cong_window = 1; newsk->cong_count = 0; newsk->ssthresh = 0x7fffffff; newsk->lrcvtime = 0; newsk->idletime = 0; newsk->high_seq = 0; newsk->backoff = 0; newsk->blog = 0; newsk->intr = 0; newsk->proc = 0; newsk->done = 0; newsk->partial = NULL; newsk->pair = NULL; newsk->wmem_alloc = 0; newsk->rmem_alloc = 0; newsk->localroute = sk->localroute; newsk->max_unacked = MAX_WINDOW - TCP_WINDOW_DIFF; newsk->err = 0; newsk->shutdown = 0; newsk->ack_backlog = 0; newsk->acked_seq = skb->seq+1; newsk->lastwin_seq = skb->seq+1; newsk->delay_acks = 1; newsk->copied_seq = skb->seq+1; newsk->fin_seq = skb->seq; newsk->syn_seq = skb->seq; newsk->state = TCP_SYN_RECV; newsk->timeout = 0; newsk->ip_xmit_timeout = 0; newsk->urg_data = 0; newsk->retransmits = 0; newsk->linger=0; newsk->destroy = 0; init_timer(&newsk->timer); newsk->timer.data = (unsigned long)newsk; newsk->timer.function = &net_timer; init_timer(&newsk->delack_timer); newsk->delack_timer.data = (unsigned long)newsk; newsk->delack_timer.function = tcp_delack_timer; init_timer(&newsk->retransmit_timer); newsk->retransmit_timer.data = (unsigned long)newsk; newsk->retransmit_timer.function = tcp_retransmit_timer; newsk->dummy_th.source = skb->h.th->dest; newsk->dummy_th.dest = skb->h.th->source; newsk->users=0; #ifdef CONFIG_IP_TRANSPARENT_PROXY /* * Deal with possibly redirected traffic by setting num to * the intended destination port of the received packet. */ newsk->num = ntohs(skb->h.th->dest); #endif /* * Swap these two, they are from our point of view. */ newsk->daddr = saddr; newsk->saddr = daddr; newsk->rcv_saddr = daddr; #ifdef CONFIG_SYN_COOKIES /* Don't actually stuff the socket into the protocol lists * if we are going to just destroy it anyway. We don't want any * funnies happening if the next packet arrives before we get * a chance to clean this one up. */ if (!send_cookie) #endif { tcp_v4_hash(newsk); add_to_prot_sklist(newsk); } newsk->acked_seq = skb->seq + 1; newsk->copied_seq = skb->seq + 1; newsk->socket = NULL; newsk->listening = sk; /* * Grab the ttl and tos values and use them */ newsk->ip_ttl=sk->ip_ttl; newsk->ip_tos=TOS_VALID_MASK(skb->ip_hdr->tos); /* * Use 512 or whatever user asked for */ /* * Note use of sk->user_mss, since user has no direct access to newsk */ rt = ip_rt_route(newsk->opt && newsk->opt->srr ? newsk->opt->faddr : saddr, 0, sk->bound_device); newsk->ip_route_cache = rt; if(rt!=NULL && (rt->rt_flags&RTF_WINDOW)) newsk->window_clamp = rt->rt_window; else newsk->window_clamp = 0; if (sk->user_mss) newsk->mtu = sk->user_mss; else if (rt) newsk->mtu = rt->rt_mtu - sizeof(struct iphdr) - sizeof(struct tcphdr); else newsk->mtu = 576 - sizeof(struct iphdr) - sizeof(struct tcphdr); /* * But not bigger than device MTU */ newsk->mtu = min(newsk->mtu, dev->mtu - sizeof(struct iphdr) - sizeof(struct tcphdr)); /* Must check it here, just to be absolutely safe. If we end up * with a newsk->{max_window,mtu} of zero, we can thus end up with * a newsk->mss of zero, which causes us to bomb out in * tcp_do_sendmsg. -DaveM */ if(newsk->mtu < 32) newsk->mtu = 32; #ifdef CONFIG_SKIP /* * SKIP devices set their MTU to 65535. This is so they can take packets * unfragmented to security process then fragment. They could lie to the * TCP layer about a suitable MTU, but it's easier to let skip sort it out * simply because the final package we want unfragmented is going to be * * [IPHDR][IPSP][Security data][Modified TCP data][Security data] */ if(skip_pick_mtu!=NULL) /* If SKIP is loaded.. */ sk->mtu=skip_pick_mtu(sk->mtu,dev); #endif /* * This will min with what arrived in the packet */ tcp_options(newsk,skb->h.th); #ifdef CONFIG_SYN_COOKIES if (send_cookie) { int mtu_index = 0; /* Pick the largest MTU smaller than sk->mtu that we * can represent in a cookies bottom 3 bits. */ while (newsk->mtu > cookie_mtu[mtu_index+1] && mtu_index < 7) mtu_index++; newsk->mtu = cookie_mtu[mtu_index]; /* * Choose a cookie. */ seq = secure_tcp_syn_cookie(daddr,saddr, ntohs(th->source),ntohs(th->dest),ntohl(th->seq),jiffies/(60*HZ)); seq |= mtu_index; } #endif /* Set up the right sequence numbers */ newsk->write_seq = seq; newsk->window_seq = newsk->write_seq; newsk->rcv_ack_seq = newsk->write_seq; #ifdef CONFIG_SYN_COOKIES tcp_send_synack(newsk, sk, skb, send_cookie); #else tcp_send_synack(newsk, sk, skb, 0); #endif } #ifdef CONFIG_SYN_COOKIES /* * This routine handles a faked connection request as a result * of a valid SYN cookie being seen. This sets up a socket in the * SYN_SENT state. */ static int tcp_conn_request_fake(struct sock *sk, struct sk_buff *skb, u32 daddr, u32 saddr, struct options *opt, struct device *dev, u32 seq, u32 mtu) { struct sock *newsk; struct sk_buff *newskb; struct rtable *rt; /* If the socket is dead, don't accept the connection. */ if (!sk->dead) { /*sk->data_ready(sk,0); */ } else { if(sk->debug) printk("Reset on %p: Connect on dead socket.\n",sk); tcp_statistics.TcpAttemptFails++; return 0; } /* * We need to build a new sock struct. * It is sort of bad to have a socket without an inode attached * to it, but the wake_up's will just wake up the listening socket, * and if the listening socket is destroyed before this is taken * off of the queue, this will take care of it. */ newsk = (struct sock *) kmalloc(sizeof(struct sock), GFP_ATOMIC); if (newsk == NULL) { /* Bad juju. If we ignore things now the remote side * will be frozen. Really we should retrans the cookie, * but that's a no go also, since we don't have enough * memory to receive it either. So, we're stuck with * this bad case, and a few others further down. * We just have to hope it is a low probability event. * Also, to avoid a loop we must not go down into * the recursive call to tcp_rcv in the caller to this * routine, so we should let them know we failed. */ tcp_statistics.TcpAttemptFails++; return 0; } memcpy(newsk, sk, sizeof(*newsk)); /* Or else we die! -DaveM */ newsk->sklist_next = NULL; newsk->opt = NULL; newsk->ip_route_cache = NULL; if (opt && opt->optlen) { sk->opt = (struct options*)kmalloc(sizeof(struct options)+opt->optlen, GFP_ATOMIC); if (!sk->opt) { /* More bad juju. */ kfree_s(newsk, sizeof(struct sock)); tcp_statistics.TcpAttemptFails++; return 0; } if (ip_options_echo(sk->opt, opt, daddr, saddr, skb)) { /* More bad juju. */ kfree_s(sk->opt, sizeof(struct options)+opt->optlen); kfree_s(newsk, sizeof(struct sock)); tcp_statistics.TcpAttemptFails++; return 0; } } skb_queue_head_init(&newsk->write_queue); skb_queue_head_init(&newsk->receive_queue); newsk->send_head = NULL; newsk->send_tail = NULL; newsk->send_next = NULL; skb_queue_head_init(&newsk->back_log); newsk->rtt = 0; newsk->rto = TCP_TIMEOUT_INIT; newsk->mdev = TCP_TIMEOUT_INIT; newsk->max_window = 32; /* It cannot be left at zero. -DaveM */ /* * See draft-stevens-tcpca-spec-01 for discussion of the * initialization of these values. */ newsk->cong_window = 1; newsk->cong_count = 0; newsk->ssthresh = 0x7fffffff; newsk->lrcvtime = 0; newsk->idletime = 0; newsk->high_seq = 0; newsk->backoff = 0; newsk->blog = 0; newsk->intr = 0; newsk->proc = 0; newsk->done = 0; newsk->partial = NULL; newsk->pair = NULL; newsk->wmem_alloc = 0; newsk->rmem_alloc = 0; newsk->localroute = sk->localroute; newsk->max_unacked = MAX_WINDOW - TCP_WINDOW_DIFF; newsk->err = 0; newsk->shutdown = 0; newsk->ack_backlog = 0; newsk->acked_seq = skb->seq; newsk->lastwin_seq = skb->seq; newsk->delay_acks = 1; newsk->copied_seq = skb->seq; newsk->fin_seq = skb->seq-1; newsk->syn_seq = skb->seq-1; newsk->state = TCP_SYN_RECV; newsk->timeout = 0; newsk->ip_xmit_timeout = 0; newsk->urg_data = 0; newsk->retransmits = 0; newsk->linger=0; newsk->destroy = 0; init_timer(&newsk->timer); newsk->timer.data = (unsigned long)newsk; newsk->timer.function = &net_timer; init_timer(&newsk->delack_timer); newsk->delack_timer.data = (unsigned long)newsk; newsk->delack_timer.function = tcp_delack_timer; init_timer(&newsk->retransmit_timer); newsk->retransmit_timer.data = (unsigned long)newsk; newsk->retransmit_timer.function = tcp_retransmit_timer; newsk->dummy_th.source = skb->h.th->dest; newsk->dummy_th.dest = skb->h.th->source; newsk->users=0; #ifdef CONFIG_IP_TRANSPARENT_PROXY /* * Deal with possibly redirected traffic by setting num to * the intended destination port of the received packet. */ newsk->num = ntohs(skb->h.th->dest); #endif /* * Swap these two, they are from our point of view. */ newsk->daddr = saddr; newsk->saddr = daddr; newsk->rcv_saddr = daddr; tcp_v4_hash(newsk); add_to_prot_sklist(newsk); newsk->acked_seq = skb->seq; newsk->copied_seq = skb->seq; newsk->socket = NULL; newsk->listening = sk; /* * Grab the ttl and tos values and use them */ newsk->ip_ttl=sk->ip_ttl; newsk->ip_tos=TOS_VALID_MASK(skb->ip_hdr->tos); rt = ip_rt_route(newsk->opt && newsk->opt->srr ? newsk->opt->faddr : saddr, 0, sk->bound_device); newsk->ip_route_cache = rt; if (rt!=NULL && (rt->rt_flags&RTF_WINDOW)) newsk->window_clamp = rt->rt_window; else newsk->window_clamp = 0; newsk->mtu = mtu; /* Set up the right sequence numbers. * Note that we have to make sure write_seq is correct for having * sent off the handshake! */ newsk->write_seq = seq+1; newsk->sent_seq = seq+1; newsk->window_seq = seq; newsk->rcv_ack_seq = seq; newsk->max_unacked = 2 * newsk->mss; tcp_select_window(newsk); /* We need to get something into the receive queue to enable an * accept. Possibly we should be faking up a SYN packet, but * as far as I can tell the contents of this skb don't matter, * so long as it points to our new socket. */ newskb = skb_clone(skb,GFP_ATOMIC); newskb->sk = newsk; atomic_add(skb->truesize, &newsk->rmem_alloc); sk->ack_backlog++; skb_queue_tail(&sk->receive_queue,newskb); return 1; } #endif /* * Handle a TCP window that shrunk on us. It shouldn't happen, * but.. * * We may need to move packets from the send queue * to the write queue, if the window has been shrunk on us. * The RFC says you are not allowed to shrink your window * like this, but if the other end does, you must be able * to deal with it. */ void tcp_window_shrunk(struct sock * sk, u32 window_seq) { struct sk_buff *skb; struct sk_buff *skb2; struct sk_buff *wskb = NULL; skb2 = sk->send_head; sk->send_head = NULL; sk->send_tail = NULL; sk->send_next = NULL; /* * This is an artifact of a flawed concept. We want one * queue and a smarter send routine when we send all. */ cli(); while (skb2 != NULL) { skb = skb2; skb2 = skb->link3; skb->link3 = NULL; if (after(skb->end_seq, window_seq)) { if (sk->packets_out > 0) sk->packets_out--; /* We may need to remove this from the dev send list. */ if (skb->next != NULL) { skb_unlink(skb); } /* Now add it to the write_queue. */ if (wskb == NULL) skb_queue_head(&sk->write_queue,skb); else skb_append(wskb,skb); wskb = skb; } else { if (sk->send_head == NULL) { sk->send_head = skb; sk->send_tail = skb; sk->send_next = skb; } else { sk->send_tail->link3 = skb; sk->send_tail = skb; } skb->link3 = NULL; } } sti(); } /* * This routine deals with incoming acks, but not outgoing ones. * * This routine is totally _WRONG_. The list structuring is wrong, * the algorithm is wrong, the code is wrong. */ static int tcp_ack(struct sock *sk, struct tcphdr *th, u32 ack, int len) { int flag = 0; u32 window_seq; /* * 1 - there was data in packet as well as ack or new data is sent or * in shutdown state * 2 - data from retransmit queue was acked and removed * 4 - window shrunk or data from retransmit queue was acked and removed */ if(sk->zapped) return(1); /* Dead, can't ack any more so why bother */ /* * We have dropped back to keepalive timeouts. Thus we have * no retransmits pending. */ if (sk->ip_xmit_timeout == TIME_KEEPOPEN) sk->retransmits = 0; /* * If the ack is newer than sent or older than previous acks * then we can probably ignore it. */ if (after(ack, sk->sent_seq) || before(ack, sk->rcv_ack_seq)) goto uninteresting_ack; /* * Have we discovered a larger window */ window_seq = ntohs(th->window); if (window_seq > sk->max_window) { sk->max_window = window_seq; #ifdef CONFIG_INET_PCTCP /* Hack because we don't send partial packets to non SWS handling hosts */ sk->mss = min(window_seq>>1, sk->mtu); #else sk->mss = min(window_seq, sk->mtu); #endif } window_seq += ack; /* * See if our window has been shrunk. */ if (after(sk->window_seq, window_seq)) tcp_window_shrunk(sk, window_seq); /* * Pipe has emptied */ if (sk->send_tail == NULL || sk->send_head == NULL) { sk->send_head = NULL; sk->send_tail = NULL; sk->send_next = NULL; sk->packets_out= 0; } /* * We don't want too many packets out there. */ if (sk->ip_xmit_timeout == TIME_WRITE && sk->cong_window < 2048 && after(ack, sk->rcv_ack_seq)) { /* * This is Jacobson's slow start and congestion avoidance. * SIGCOMM '88, p. 328. Because we keep cong_window in integral * mss's, we can't do cwnd += 1 / cwnd. Instead, maintain a * counter and increment it once every cwnd times. It's possible * that this should be done only if sk->retransmits == 0. I'm * interpreting "new data is acked" as including data that has * been retransmitted but is just now being acked. */ if (sk->cong_window <= sk->ssthresh) /* * In "safe" area, increase */ sk->cong_window++; else { /* * In dangerous area, increase slowly. In theory this is * sk->cong_window += 1 / sk->cong_window */ if (sk->cong_count >= sk->cong_window) { sk->cong_window++; sk->cong_count = 0; } else sk->cong_count++; } } /* * Remember the highest ack received and update the * right hand window edge of the host. * We do a bit of work here to track number of times we've * seen this ack without a change in the right edge of the * window and no data in the packet. * This will allow us to do fast retransmits. */ /* We are looking for duplicate ACKs here. * An ACK is a duplicate if: * (1) it has the same sequence number as the largest number we've seen, * (2) it has the same window as the last ACK, * (3) we have outstanding data that has not been ACKed * (4) The packet was not carrying any data. * (5) [From Floyd's paper on fast retransmit wars] * The packet acked data after high_seq; * I've tried to order these in occurrence of most likely to fail * to least likely to fail. * [These are an extension of the rules BSD stacks use to * determine if an ACK is a duplicate.] */ if (sk->rcv_ack_seq == ack && sk->window_seq == window_seq && len == th->doff*4 && before(ack, sk->sent_seq) && after(ack, sk->high_seq)) { /* Prevent counting of duplicate ACKs if the congestion * window is smaller than 3. Note that since we reduce * the congestion window when we do a fast retransmit, * we must be careful to keep counting if we were already * counting. The idea behind this is to avoid doing * fast retransmits if the congestion window is so small * that we cannot get 3 ACKs due to the loss of a packet * unless we are getting ACKs for retransmitted packets. */ if (sk->cong_window >= 3 || sk->rcv_ack_cnt > MAX_DUP_ACKS+1) sk->rcv_ack_cnt++; /* See draft-stevens-tcpca-spec-01 for explanation * of what we are doing here. */ if (sk->rcv_ack_cnt == MAX_DUP_ACKS+1) { int tmp; /* We need to be a bit careful to preserve the * count of packets that are out in the system here. */ sk->ssthresh = max( min(sk->cong_window, (sk->window_seq-sk->rcv_ack_seq)/max(sk->mss,1)) >> 1, 2); sk->cong_window = sk->ssthresh+MAX_DUP_ACKS+1; sk->cong_count = 0; tmp = sk->packets_out; tcp_do_retransmit(sk,0); sk->packets_out = tmp; } else if (sk->rcv_ack_cnt > MAX_DUP_ACKS+1) { sk->cong_window++; /* * At this point we are suppose to transmit a NEW * packet (not retransmit the missing packet, * this would only get us into a retransmit war.) * I think that having just adjusted cong_window * we will transmit the new packet below. */ } } else { if (sk->rcv_ack_cnt > MAX_DUP_ACKS) { /* Don't allow congestion window to drop to zero. */ sk->cong_window = max(sk->ssthresh, 1); sk->cong_count = 0; } sk->window_seq = window_seq; sk->rcv_ack_seq = ack; sk->rcv_ack_cnt = 1; } /* * We passed data and got it acked, remove any soft error * log. Something worked... */ sk->err_soft = 0; /* * If this ack opens up a zero window, clear backoff. It was * being used to time the probes, and is probably far higher than * it needs to be for normal retransmission. */ if (sk->ip_xmit_timeout == TIME_PROBE0) { sk->retransmits = 0; /* Our probe was answered */ /* * Was it a usable window open ? */ if (!skb_queue_empty(&sk->write_queue) && /* should always be true */ ! before (sk->window_seq, sk->write_queue.next->end_seq)) { sk->backoff = 0; /* * Recompute rto from rtt. this eliminates any backoff. */ /* * Appendix C of Van Jacobson's final version of * the SIGCOMM 88 paper states that although * the original paper suggested that * RTO = R*2V * was the correct calculation experience showed * better results using * RTO = R*4V * In particular this gives better performance over * slow links, and should not effect fast links. * * Note: Jacobson's algorithm is fine on BSD which * has a 1/2 second granularity clock, but with our * 1/100 second granularity clock we become too * sensitive to minor changes in the round trip time. * We add in two compensating factors. * First we multiply by 5/4. For large congestion * windows this allows us to tolerate burst traffic * delaying up to 1/4 of our packets. * We also add in a rtt / cong_window term. * For small congestion windows this allows * a single packet delay, but has negligible effect * on the compensation for large windows. */ sk->rto = (sk->rtt >> 3) + sk->mdev; sk->rto += (sk->rto>>2) + (sk->rto >> (sk->cong_window-1)); if (sk->rto > 120*HZ) sk->rto = 120*HZ; if (sk->rto < HZ/5) /* Was 1*HZ, then 1 - turns out we must allow about .2 of a second because of BSD delayed acks - on a 100Mb/sec link .2 of a second is going to need huge windows (SIGH) */ sk->rto = HZ/5; } } /* * See if we can take anything off of the retransmit queue. */ for (;;) { int was_locked; struct sk_buff * skb = sk->send_head; if (!skb) break; /* Check for a bug. */ if (skb->link3 && after(skb->end_seq, skb->link3->end_seq)) printk("INET: tcp.c: *** bug send_list out of order.\n"); /* * If our packet is before the ack sequence we can * discard it as it's confirmed to have arrived the other end. */ if (after(skb->end_seq, ack)) break; if (sk->retransmits) { /* * We were retransmitting. don't count this in RTT est */ flag |= 2; } if ((sk->send_head = skb->link3) == NULL) { sk->send_tail = NULL; sk->send_next = NULL; sk->retransmits = 0; } /* * advance the send_next pointer if needed. */ if (sk->send_next == skb) sk->send_next = sk->send_head; /* * Note that we only reset backoff and rto in the * rtt recomputation code. And that doesn't happen * if there were retransmissions in effect. So the * first new packet after the retransmissions is * sent with the backoff still in effect. Not until * we get an ack from a non-retransmitted packet do * we reset the backoff and rto. This allows us to deal * with a situation where the network delay has increased * suddenly. I.e. Karn's algorithm. (SIGCOMM '87, p5.) */ /* * We have one less packet out there. */ if (sk->packets_out > 0) sk->packets_out --; /* This is really only supposed to be called when we * are actually ACKing new data, which should exclude * the ACK handshake on an initial SYN packet as well. * Rather than introducing a new test here for this * special case, we just reset the initial values for * rtt immediately after we move to the established state. */ if (!(flag&2)) /* Not retransmitting */ tcp_rtt_estimator(sk,skb); IS_SKB(skb); /* * We may need to remove this from the dev send list. */ cli(); was_locked = skb_device_locked(skb); if (was_locked) { /* In this case, we are relying on the fact that kfree_skb * will just set the free flag to be 3, and increment * a counter. It will not actually free anything, and * will not take much time */ kfree_skb(skb, FREE_WRITE); } else { skb_unlink(skb); } sti(); if (!was_locked) kfree_skb(skb, FREE_WRITE); /* write. */ if (!sk->dead) sk->write_space(sk); } /* * Maybe we can take some stuff off of the write queue, * and put it onto the xmit queue. * There is bizarre case being tested here, to check if * the data at the head of the queue ends before the start of * the sequence we already ACKed. This is not an error, * it can occur when we send a packet directly off of the write_queue * in a zero window probe. */ if (!skb_queue_empty(&sk->write_queue) && !before(sk->window_seq, sk->write_queue.next->end_seq) && (sk->retransmits == 0 || sk->ip_xmit_timeout != TIME_WRITE || !after(sk->write_queue.next->end_seq, sk->rcv_ack_seq)) && sk->packets_out < sk->cong_window) { /* * Add more data to the send queue. */ tcp_write_xmit(sk); } /* * Reset timers to reflect the new state. * * from TIME_WAIT we stay in TIME_WAIT as long as we rx packets * from TCP_CLOSE we don't do anything * * from anything else, if there is queued data (or fin) pending, * we use a TIME_WRITE timeout, if there is data to write but * no room in the window we use TIME_PROBE0, else if keepalive * we reset to a KEEPALIVE timeout, else we delete the timer. * * We do not set flag for nominal write data, otherwise we may * force a state where we start to write itsy bitsy tidbits * of data. */ switch(sk->state) { case TCP_TIME_WAIT: /* * keep us in TIME_WAIT until we stop getting packets, * reset the timeout. */ tcp_reset_msl_timer(sk, TIME_CLOSE, TCP_TIMEWAIT_LEN); break; case TCP_CLOSE: /* * don't touch the timer. */ break; default: /* * Must check send_head and write_queue * to determine which timeout to use. */ if (sk->send_head) { tcp_reset_xmit_timer(sk, TIME_WRITE, sk->rto); } else if (!skb_queue_empty(&sk->write_queue) && sk->ack_backlog == 0) { /* * if the write queue is not empty when we get here * then we failed to move any data to the retransmit * queue above. (If we had send_head would be non-NULL). * Furthermore, since the send_head is NULL here * we must not be in retransmit mode at this point. * This implies we have no packets in flight, * hence sk->packets_out < sk->cong_window. * Examining the conditions for the test to move * data to the retransmission queue we find that * we must therefore have a zero window. * Hence, if the ack_backlog is 0 we should initiate * a zero probe. * We don't do a zero probe if we have a delayed * ACK in hand since the other side may have a * window opening, but they are waiting to hear * from us before they tell us about it. * (They are applying Nagle's rule). * So, we don't set up the zero window probe * just yet. We do have to clear the timer * though in this case... */ tcp_reset_xmit_timer(sk, TIME_PROBE0, sk->rto); } else if (sk->keepopen) { tcp_reset_xmit_timer(sk, TIME_KEEPOPEN, TCP_TIMEOUT_LEN); } else { del_timer(&sk->retransmit_timer); sk->ip_xmit_timeout = 0; } break; } /* * In the LAST_ACK case, the other end FIN'd us. We then FIN'd them, and * we are now waiting for an acknowledge to our FIN. The other end is * already in TIME_WAIT. * * Move to TCP_CLOSE on success. */ if (sk->state == TCP_LAST_ACK) { if (!sk->dead) sk->state_change(sk); if(sk->debug) printk("rcv_ack_seq: %X==%X, acked_seq: %X==%X\n", sk->rcv_ack_seq,sk->write_seq,sk->acked_seq,sk->fin_seq); if (sk->rcv_ack_seq == sk->write_seq /*&& sk->acked_seq == sk->fin_seq*/) { sk->shutdown = SHUTDOWN_MASK; tcp_set_state(sk,TCP_CLOSE); return 1; } } /* * Incoming ACK to a FIN we sent in the case of our initiating the close. * * Move to FIN_WAIT2 to await a FIN from the other end. Set * SEND_SHUTDOWN but not RCV_SHUTDOWN as data can still be coming in. */ if (sk->state == TCP_FIN_WAIT1) { if (!sk->dead) sk->state_change(sk); if (sk->rcv_ack_seq == sk->write_seq) { sk->shutdown |= SEND_SHUTDOWN; tcp_set_state(sk, TCP_FIN_WAIT2); /* If the socket is dead, then there is no * user process hanging around using it. * We want to set up a FIN_WAIT2 timeout ala BSD. */ if (sk->dead) tcp_reset_msl_timer(sk, TIME_CLOSE, TCP_FIN_TIMEOUT); } } /* * Incoming ACK to a FIN we sent in the case of a simultaneous close. * * Move to TIME_WAIT */ if (sk->state == TCP_CLOSING) { if (!sk->dead) sk->state_change(sk); if (sk->rcv_ack_seq == sk->write_seq) { tcp_time_wait(sk); } } /* * Final ack of a three way shake */ if (sk->state==TCP_SYN_RECV) { tcp_set_state(sk, TCP_ESTABLISHED); /* * We have a listening socket owning us. Wake it for * the accept. */ if ( sk->listening ) { /* The listener may be sk->dead. Dont worry data_ready traps this */ sk->data_ready(sk->listening,0); sk->listening = NULL; } /* Must check for peer advertising zero sized window * or else we get a sk->{mtu,mss} of zero and thus bomb out * in tcp_do_sendmsg. -DaveM */ if(sk->max_window == 0) sk->max_window = 32; tcp_options(sk,th); #if 0 sk->dummy_th.dest=th->source; tcp_v4_rehash(sk); #endif sk->copied_seq = sk->acked_seq; if(!sk->dead) sk->state_change(sk); /* Reset the RTT estimator to the initial * state rather than testing to avoid * updating it on the ACK to the SYN packet. */ sk->rtt = 0; sk->rto = TCP_TIMEOUT_INIT; sk->mdev = TCP_TIMEOUT_INIT; } /* * The following code has been greatly simplified from the * old hacked up stuff. The wonders of properly setting the * retransmission timeouts. * * If we are retransmitting, and we acked a packet on the retransmit * queue, and there is still something in the retransmit queue, * then we can output some retransmission packets. * * Note that we need to be a bit careful here about getting the * correct TIME_WRITE timer set. If we just got an ack of a * packet we where retransmitting, we will retransmit the next * packet in the retransmit queue below, and the timeout * should now start from the time we retransmitted that packet. * The resetting of the TIME_WRITE timer above will have set it * relative to the prior transmission time, which would be wrong. */ if (sk->send_head != NULL && (flag&2) && sk->retransmits) { tcp_do_retransmit(sk, 1); tcp_reset_xmit_timer(sk, TIME_WRITE, sk->rto); } return 1; uninteresting_ack: if(sk->debug) printk("Ack ignored %u %u\n",ack,sk->sent_seq); /* * Keepalive processing. */ if (after(ack, sk->sent_seq)) { return 0; } /* * Restart the keepalive timer. */ if (sk->keepopen) { if(sk->ip_xmit_timeout==TIME_KEEPOPEN) tcp_reset_xmit_timer(sk, TIME_KEEPOPEN, TCP_TIMEOUT_LEN); } /* * A zero return from tcp_ack(), while in SYN_RECV, means that the * handshake has failed, and an RST packet should be generated. We * really have to generate an RST here, or a blind spoofing attack * would be possible. */ return sk->state != TCP_SYN_RECV; } /* * Process the FIN bit. This now behaves as it is supposed to work * and the FIN takes effect when it is validly part of sequence * space. Not before when we get holes. * * If we are ESTABLISHED, a received fin moves us to CLOSE-WAIT * (and thence onto LAST-ACK and finally, CLOSE, we never enter * TIME-WAIT) * * If we are in FINWAIT-1, a received FIN indicates simultaneous * close and we go into CLOSING (and later onto TIME-WAIT) * * If we are in FINWAIT-2, a received FIN moves us to TIME-WAIT. * */ static int tcp_fin(struct sk_buff *skb, struct sock *sk, struct tcphdr *th) { sk->fin_seq = skb->end_seq; if (!sk->dead) { sk->state_change(sk); sock_wake_async(sk->socket, 1); } switch(sk->state) { case TCP_SYN_RECV: case TCP_SYN_SENT: case TCP_ESTABLISHED: /* * move to CLOSE_WAIT, tcp_data() already handled * sending the ack. */ tcp_set_state(sk,TCP_CLOSE_WAIT); if (th->rst) sk->shutdown = SHUTDOWN_MASK; break; case TCP_CLOSE_WAIT: case TCP_CLOSING: /* * received a retransmission of the FIN, do * nothing. */ break; case TCP_TIME_WAIT: /* * received a retransmission of the FIN, * restart the TIME_WAIT timer. */ tcp_reset_msl_timer(sk, TIME_CLOSE, TCP_TIMEWAIT_LEN); return(0); case TCP_FIN_WAIT1: /* * This case occurs when a simultaneous close * happens, we must ack the received FIN and * enter the CLOSING state. * * This causes a WRITE timeout, which will either * move on to TIME_WAIT when we timeout, or resend * the FIN properly (maybe we get rid of that annoying * FIN lost hang). The TIME_WRITE code is already correct * for handling this timeout. */ if (sk->ip_xmit_timeout != TIME_WRITE) { if (sk->send_head) tcp_reset_xmit_timer(sk, TIME_WRITE, sk->rto); else if (sk->ip_xmit_timeout != TIME_PROBE0 || skb_queue_empty(&sk->write_queue)) { /* BUG check case. * We have a problem here if there * is no timer running [leads to * frozen socket] or no data in the * write queue [means we sent a fin * and lost it from the queue before * changing the ack properly]. */ printk(KERN_ERR "Lost timer or fin packet in tcp_fin.\n"); } } tcp_set_state(sk,TCP_CLOSING); break; case TCP_FIN_WAIT2: /* * received a FIN -- send ACK and enter TIME_WAIT */ tcp_reset_msl_timer(sk, TIME_CLOSE, TCP_TIMEWAIT_LEN); sk->shutdown|=SHUTDOWN_MASK; tcp_set_state(sk,TCP_TIME_WAIT); break; case TCP_CLOSE: /* * already in CLOSE */ break; default: tcp_set_state(sk,TCP_LAST_ACK); /* Start the timers. */ tcp_reset_msl_timer(sk, TIME_CLOSE, TCP_TIMEWAIT_LEN); return(0); } return(0); } /* * Add a sk_buff to the TCP receive queue, calculating * the ACK sequence as we go.. */ static inline void tcp_insert_skb(struct sk_buff * skb, struct sk_buff_head * list) { struct sk_buff * prev, * next; u32 seq; /* * Find where the new skb goes.. (This goes backwards, * on the assumption that we get the packets in order) */ seq = skb->seq; prev = list->prev; next = (struct sk_buff *) list; for (;;) { if (prev == (struct sk_buff *) list || !after(prev->seq, seq)) break; next = prev; prev = prev->prev; } __skb_insert(skb, prev, next, list); } /* * Called for each packet when we find a new ACK endpoint sequence in it */ static inline u32 tcp_queue_ack(struct sk_buff * skb, struct sock * sk) { /* * When we ack the fin, we do the FIN * processing. */ skb->acked = 1; if (skb->h.th->fin) tcp_fin(skb,sk,skb->h.th); return skb->end_seq; } static void tcp_queue(struct sk_buff * skb, struct sock * sk, struct tcphdr *th) { u32 ack_seq; tcp_insert_skb(skb, &sk->receive_queue); /* * Did we get anything new to ack? */ ack_seq = sk->acked_seq; if (!after(skb->seq, ack_seq)) { if (after(skb->end_seq, ack_seq)) { /* the packet straddles our window end */ struct sk_buff_head * list = &sk->receive_queue; struct sk_buff * next; ack_seq = tcp_queue_ack(skb, sk); /* * Do we have any old packets to ack that the above * made visible? (Go forward from skb) */ next = skb->next; while (next != (struct sk_buff *) list) { if (after(next->seq, ack_seq)) break; if (after(next->end_seq, ack_seq)) ack_seq = tcp_queue_ack(next, sk); next = next->next; } /* * Ok, we found new data, update acked_seq as * necessary (and possibly send the actual * ACK packet). */ sk->acked_seq = ack_seq; } else { if (sk->debug) printk("Ack duplicate packet.\n"); tcp_send_ack(sk); return; } /* * Delay the ack if possible. Send ack's to * fin frames immediately as there shouldn't be * anything more to come. */ if (!sk->delay_acks || th->fin) { tcp_send_ack(sk); } else { /* * If psh is set we assume it's an * interactive session that wants quick * acks to avoid nagling too much. */ int delay = HZ/2; if (th->psh) delay = HZ/50; tcp_send_delayed_ack(sk, delay, sk->ato); } /* * Tell the user we have some more data. */ if (!sk->dead) sk->data_ready(sk,0); } else { /* * If we've missed a packet, send an ack. * Also start a timer to send another. * * 4.3reno machines look for these kind of acks so * they can do fast recovery. Three identical 'old' * acks lets it know that one frame has been lost * and should be resent. Because this is before the * whole window of data has timed out it can take * one lost frame per window without stalling. * [See Jacobson RFC1323, Stevens TCP/IP illus vol2] * * We also should be spotting triple bad sequences. * [We now do this.] * */ if (!skb->acked) { if(sk->debug) printk("Ack past end of seq packet.\n"); tcp_send_ack(sk); /* * We need to be very careful here. We must * not violate Jacobsons packet conservation condition. * This means we should only send an ACK when a packet * leaves the network. We can say a packet left the * network when we see a packet leave the network, or * when an rto measure expires. */ tcp_send_delayed_ack(sk,sk->rto,sk->rto); } } } /* * This routine handles the data. If there is room in the buffer, * it will be have already been moved into it. If there is no * room, then we will just have to discard the packet. */ static int tcp_data(struct sk_buff *skb, struct sock *sk, unsigned long saddr, unsigned int len) { struct tcphdr *th; u32 new_seq, shut_seq; th = skb->h.th; skb_pull(skb,th->doff*4); skb_trim(skb,len-(th->doff*4)); /* * The bytes in the receive read/assembly queue has increased. Needed for the * low memory discard algorithm */ sk->bytes_rcv += skb->len; if (skb->len == 0 && !th->fin) { /* * Don't want to keep passing ack's back and forth. * (someone sent us dataless, boring frame) */ if (!th->ack) tcp_send_ack(sk); kfree_skb(skb, FREE_READ); return(0); } /* * We no longer have anyone receiving data on this connection. */ #ifndef TCP_DONT_RST_SHUTDOWN if(sk->shutdown & RCV_SHUTDOWN) { /* * FIXME: BSD has some magic to avoid sending resets to * broken 4.2 BSD keepalives. Much to my surprise a few non * BSD stacks still have broken keepalives so we want to * cope with it. */ if(skb->len) /* We don't care if it's just an ack or a keepalive/window probe */ { new_seq = skb->seq + skb->len + th->syn; /* Right edge of _data_ part of frame */ /* Do this the way 4.4BSD treats it. Not what I'd regard as the meaning of the spec but it's what BSD does and clearly they know everything 8) */ /* * This is valid because of two things * * a) The way tcp_data behaves at the bottom. * b) A fin takes effect when read not when received. */ shut_seq = sk->acked_seq+1; /* Last byte */ if(after(new_seq,shut_seq)) { if(sk->debug) printk("Data arrived on %p after close [Data right edge %X, Socket shut on %X] %d\n", sk, new_seq, shut_seq, sk->blog); if(sk->dead) { sk->acked_seq = new_seq + th->fin; tcp_send_reset(sk->saddr, sk->daddr, skb->h.th, sk->prot, NULL, skb->dev, 0, 255); tcp_statistics.TcpEstabResets++; sk->err = EPIPE; sk->error_report(sk); sk->shutdown = SHUTDOWN_MASK; tcp_set_state(sk,TCP_CLOSE); kfree_skb(skb, FREE_READ); return 0; } } } } #endif /* * We should only call this if there is data in the frame. */ tcp_delack_estimator(sk); tcp_queue(skb, sk, th); return(0); } /* * This routine is only called when we have urgent data * signalled. Its the 'slow' part of tcp_urg. It could be * moved inline now as tcp_urg is only called from one * place. We handle URGent data wrong. We have to - as * BSD still doesn't use the correction from RFC961. * * For 1003.1g we should support a new option TCP_STDURG to permit * either form. */ static void tcp_check_urg(struct sock * sk, struct tcphdr * th) { u32 ptr = ntohs(th->urg_ptr); if (ptr) ptr--; ptr += ntohl(th->seq); /* ignore urgent data that we've already seen and read */ if (after(sk->copied_seq, ptr)) return; /* do we already have a newer (or duplicate) urgent pointer? */ if (sk->urg_data && !after(ptr, sk->urg_seq)) return; /* tell the world about our new urgent pointer */ if (sk->proc != 0) { if (sk->proc > 0) { kill_proc(sk->proc, SIGURG, 1); } else { kill_pg(-sk->proc, SIGURG, 1); } } /* * We may be adding urgent data when the last byte read was * urgent. To do this requires some care. We cannot just ignore * sk->copied_seq since we would read the last urgent byte again * as data, nor can we alter copied_seq until this data arrives * or we break the sematics of SIOCATMARK (and thus sockatmark()) */ if (sk->urg_seq == sk->copied_seq) sk->copied_seq++; /* Move the copied sequence on correctly */ sk->urg_data = URG_NOTYET; sk->urg_seq = ptr; } /* * This is the 'fast' part of urgent handling. */ static inline void tcp_urg(struct sock *sk, struct tcphdr *th, unsigned long len) { /* * Check if we get a new urgent pointer - normally not */ if (th->urg) tcp_check_urg(sk,th); /* * Do we wait for any urgent data? - normally not */ if (sk->urg_data == URG_NOTYET) { u32 ptr; /* * Is the urgent pointer pointing into this packet? */ ptr = sk->urg_seq - ntohl(th->seq) + th->doff*4; if (ptr < len) { sk->urg_data = URG_VALID | *(ptr + (unsigned char *) th); if (!sk->dead) sk->data_ready(sk,0); } } } /* * This should be a bit smarter and remove partially * overlapping stuff too, but this should be good * enough for any even remotely normal case (and the * worst that can happen is that we have a few * unnecessary packets in the receive queue). * * This function is never called with an empty list.. */ static inline void tcp_remove_dups(struct sk_buff_head * list) { struct sk_buff * next = list->next; for (;;) { struct sk_buff * skb = next; next = next->next; if (next == (struct sk_buff *) list) break; if (before(next->end_seq, skb->end_seq)) { __skb_unlink(next, list); kfree_skb(next, FREE_READ); next = skb; continue; } if (next->seq != skb->seq) continue; __skb_unlink(skb, list); kfree_skb(skb, FREE_READ); } } /* * Throw out all unnecessary packets: we've gone over the * receive queue limit. This shouldn't happen in a normal * TCP connection, but we might have gotten duplicates etc. */ static void prune_queue(struct sk_buff_head * list) { for (;;) { struct sk_buff * skb = list->prev; /* gone through it all? */ if (skb == (struct sk_buff *) list) break; if (!skb->acked) { __skb_unlink(skb, list); kfree_skb(skb, FREE_READ); continue; } tcp_remove_dups(list); break; } } #ifdef CONFIG_IP_TRANSPARENT_PROXY /* * Check whether a received TCP packet might be for one of our * connections. */ int tcp_chkaddr(struct sk_buff *skb) { struct iphdr *iph = skb->h.iph; struct tcphdr *th = (struct tcphdr *)(skb->h.raw + iph->ihl*4); struct sock *sk; sk = tcp_v4_lookup(iph->saddr, th->source, iph->daddr, th->dest, skb->dev); if (!sk) return 0; /* 0 means accept all LOCAL addresses here, not all the world... */ if (sk->rcv_saddr == 0) return 0; return 1; } #endif /* * A TCP packet has arrived. * skb->h.raw is the TCP header. */ int tcp_rcv(struct sk_buff *skb, struct device *dev, struct options *opt, __u32 daddr, unsigned short len, __u32 saddr, int redo, struct inet_protocol * protocol) { struct tcphdr *th; struct sock *sk; __u32 seq; int was_ack; #ifdef CONFIG_IP_TRANSPARENT_PROXY int r; #endif /* * "redo" is 1 if we have already seen this skb but couldn't * use it at that time (the socket was locked). In that case * we have already done a lot of the work (looked up the socket * etc). */ th = skb->h.th; was_ack = th->ack; /* Remember for later when we've freed the skb */ sk = skb->sk; #ifdef CONFIG_RST_COOKIES if (th->rst && secure_tcp_probe_number(saddr,daddr,ntohs(th->source),ntohs(th->dest),ntohl(th->seq),1)) { add_clearance(saddr); } #endif if (!redo) { tcp_statistics.TcpInSegs++; if (skb->pkt_type!=PACKET_HOST) goto discard_it; /* * Pull up the IP header. */ skb_pull(skb, skb->h.raw-skb->data); /* * Try to use the device checksum if provided. */ switch (skb->ip_summed) { case CHECKSUM_NONE: skb->csum = csum_partial((char *)th, len, 0); case CHECKSUM_HW: if (tcp_check(th, len, saddr, daddr, skb->csum)) goto discard_it; default: /* CHECKSUM_UNNECESSARY */ } #ifdef CONFIG_SYN_COOKIES retry_search: #endif #ifdef CONFIG_IP_TRANSPARENT_PROXY if (skb->redirport) sk = tcp_v4_proxy_lookup(saddr, th->source, daddr, th->dest, dev->pa_addr, skb->redirport, dev); else #endif sk = __tcp_v4_lookup(th, saddr, th->source, daddr, th->dest, dev); if (!sk) goto no_tcp_socket; skb->sk = sk; skb->seq = ntohl(th->seq); skb->end_seq = skb->seq + th->syn + th->fin + len - th->doff*4; skb->ack_seq = ntohl(th->ack_seq); skb->acked = 0; skb->used = 0; skb->free = 1; skb->saddr = daddr; skb->daddr = saddr; /* * We may need to add it to the backlog here. */ if (sk->users) { __skb_queue_tail(&sk->back_log, skb); return(0); } } /* * If this socket has got a reset it's to all intents and purposes * really dead. Count closed sockets as dead. * * Note: BSD appears to have a bug here. A 'closed' TCP in BSD * simply drops data. This seems incorrect as a 'closed' TCP doesn't * exist so should cause resets as if the port was unreachable. */ if (sk->zapped || sk->state==TCP_CLOSE) { goto no_tcp_socket; } if (!sk->prot) { printk(KERN_CRIT "IMPOSSIBLE 3\n"); return(0); } /* * Charge the memory to the socket. */ skb->sk=sk; atomic_add(skb->truesize, &sk->rmem_alloc); /* * Mark the time of the last received packet. */ sk->idletime = jiffies; /* * We should now do header prediction. */ /* * This basically follows the flow suggested by RFC793, with the corrections in RFC1122. We * don't implement precedence and we process URG incorrectly (deliberately so) for BSD bug * compatibility. We also set up variables more thoroughly [Karn notes in the * KA9Q code the RFC793 incoming segment rules don't initialise the variables for all paths]. */ if(sk->state!=TCP_ESTABLISHED) /* Skip this lot for normal flow */ { /* * Now deal with unusual cases. */ if(sk->state==TCP_LISTEN) { /* Don't start connections with illegal address ranges. Trying to talk TCP to a broken dhcp host isnt good on a lan with broken SunOS 4.x boxes who think its a broadcast */ if ((saddr | daddr) == 0) goto discard_it; if (th->ack) { /* These use the socket TOS.. might want to be the received TOS */ #ifdef CONFIG_SYN_COOKIES if (!th->syn && !th->rst) { __u32 acked_seq = ntohl(th->ack_seq)-1; int mtu_index = (acked_seq&0x7); /* extract MTU */ __u32 count = jiffies/(60*HZ); acked_seq = acked_seq&0xfffffff8; /* Any time in the last 2 minutes is OK */ if (acked_seq == secure_tcp_syn_cookie(daddr, saddr,ntohs(th->source),ntohs(th->dest), ntohl(th->seq)-1,count) || acked_seq == secure_tcp_syn_cookie(daddr, saddr,ntohs(th->source),ntohs(th->dest), ntohl(th->seq)-1,count-1) || acked_seq == secure_tcp_syn_cookie(daddr, saddr,ntohs(th->source),ntohs(th->dest), ntohl(th->seq)-1,count-2)) { /* If this passes, we need to fake up the * new socket in TCP_SYN_SENT state and * call ourselves recursively to handle * the move to ESTABLISHED using the * current packet. Nasty, but a cleaner * solution would require major rewrites. */ if (tcp_conn_request_fake(sk, skb, daddr, saddr, opt, dev, (acked_seq | mtu_index), cookie_mtu[mtu_index])) { goto retry_search; } } } #endif tcp_send_reset(daddr,saddr,th,sk->prot,opt,dev,0, 255); } /* * We don't care for RST, and non SYN are absorbed (old segments) * Broadcast/multicast SYN isn't allowed. Note - bug if you change the * netmask on a running connection it can go broadcast. Even Sun's have * this problem so I'm ignoring it */ #ifdef CONFIG_IP_TRANSPARENT_PROXY /* * We may get non-local addresses and still want to * handle them locally, due to transparent proxying. * Thus, narrow down the test to what is really meant. */ if(th->rst || !th->syn || th->ack || (r = ip_chk_addr(daddr)) == IS_BROADCAST || r == IS_MULTICAST) #else if(th->rst || !th->syn || th->ack || ip_chk_addr(daddr)!=IS_MYADDR) #endif { kfree_skb(skb, FREE_READ); return 0; } /* * Guess we need to make a new socket up */ seq = secure_tcp_sequence_number(saddr, daddr, skb->h.th->dest, skb->h.th->source); tcp_conn_request(sk, skb, daddr, saddr, opt, dev, seq); /* * Now we have several options: In theory there is nothing else * in the frame. KA9Q has an option to send data with the syn, * BSD accepts data with the syn up to the [to be] advertised window * and Solaris 2.1 gives you a protocol error. For now we just ignore * it, that fits the spec precisely and avoids incompatibilities. It * would be nice in future to drop through and process the data. * * Now TTCP is starting to use we ought to queue this data. */ return 0; } /* * Retransmitted SYN for our socket. This is uninteresting. If sk->state==TCP_LISTEN * then it's a new connection */ if (sk->state == TCP_SYN_RECV) { if(th->syn && skb->seq+1 == sk->acked_seq) { kfree_skb(skb, FREE_READ); return 0; } goto rfc_step4; } /* * SYN sent means we have to look for a suitable ack and either reset * for bad matches or go to connected. The SYN_SENT case is unusual and should * not be in line code. [AC] */ if(sk->state==TCP_SYN_SENT) { /* Crossed SYN or previous junk segment */ if(th->ack) { /* We got an ack, but it's not a good ack. * We used to test this with a call to tcp_ack, * but this loses, because it takes the SYN * packet out of the send queue, even if * the ACK doesn't have the SYN bit sent, and * therefore isn't the one we are waiting for. */ if (after(skb->ack_seq, sk->sent_seq) || before(skb->ack_seq, sk->rcv_ack_seq)) { /* Reset the ack - it's an ack from a different connection [ th->rst is checked in tcp_send_reset()] */ tcp_statistics.TcpAttemptFails++; tcp_send_reset(daddr, saddr, th, sk->prot, opt,dev,0,255); kfree_skb(skb, FREE_READ); return(0); } if(th->rst) return tcp_reset(sk,skb); if(!th->syn) { /* A valid ack from a different connection start. Shouldn't happen but cover it */ tcp_statistics.TcpAttemptFails++; tcp_send_reset(daddr, saddr, th, sk->prot, opt,dev,0,255); kfree_skb(skb, FREE_READ); return 0; } /* process the ACK, get the SYN packet out * of the send queue, do other initial * processing stuff. [We know it's good, and * we know it's the SYN,ACK we want.] */ tcp_ack(sk,th,skb->ack_seq,len); /* We must check here (before tcp_options) whether * peer advertised a zero sized window on us, else * we end up with a zero sk->{mtu,mss} and thus bomb * out in tcp_do_sendmsg. -DaveM */ if(sk->max_window == 0) sk->max_window = 32; /* * Ok.. it's good. Set up sequence numbers and * move to established. */ sk->acked_seq = skb->seq+1; sk->lastwin_seq = skb->seq+1; sk->fin_seq = skb->seq; tcp_send_ack(sk); tcp_set_state(sk, TCP_ESTABLISHED); tcp_options(sk,th); #if 0 sk->dummy_th.dest=th->source; tcp_v4_rehash(sk); #endif sk->copied_seq = sk->acked_seq; if(!sk->dead) { sk->state_change(sk); sock_wake_async(sk->socket, 0); } /* Reset the RTT estimator to the initial * state rather than testing to avoid * updating it on the ACK to the SYN packet. */ sk->rtt = 0; sk->rto = TCP_TIMEOUT_INIT; sk->mdev = TCP_TIMEOUT_INIT; goto rfc_step6; } else { /* See if SYN's cross. Drop if boring */ if(th->syn && !th->rst) { /* Crossed SYN's are fine - but talking to yourself is right out... */ if(sk->saddr==saddr && sk->daddr==daddr && sk->dummy_th.source==th->source && sk->dummy_th.dest==th->dest) { tcp_statistics.TcpAttemptFails++; return tcp_reset(sk,skb); } tcp_set_state(sk,TCP_SYN_RECV); /* * FIXME: * Must send SYN|ACK here */ } /* Discard junk segment */ kfree_skb(skb, FREE_READ); return 0; } /* * Data maybe.. drop through */ } /* * BSD has a funny hack with TIME_WAIT and fast reuse of a port. There is * a more complex suggestion for fixing these reuse issues in RFC1644 * but not yet ready for general use. Also see RFC1379. * * Note the funny way we go back to the top of this function for * this case ("goto try_next_socket"). That also takes care of * checking "sk->users" for the new socket as well as doing all * the normal tests on the packet. */ #define BSD_TIME_WAIT #ifdef BSD_TIME_WAIT if (sk->state == TCP_TIME_WAIT && th->syn && sk->dead && after(skb->seq, sk->acked_seq) && !th->rst) { u32 seq = sk->write_seq; if(sk->debug) printk("Doing a BSD time wait\n"); tcp_statistics.TcpEstabResets++; atomic_sub(skb->truesize, &sk->rmem_alloc); skb->sk = NULL; sk->err=ECONNRESET; tcp_set_state(sk, TCP_CLOSE); sk->shutdown = SHUTDOWN_MASK; #ifdef CONFIG_IP_TRANSPARENT_PROXY /* What to do here? * For the non-proxy case, this code is effectively almost a no-op, * due to the sk = NULL. Is that intentional? If so, why shouldn't we * do the same for the proxy case and get rid of some useless code? */ if (skb->redirport) sk = tcp_v4_proxy_lookup(saddr, th->source, daddr, th->dest, dev->pa_addr, skb->redirport, dev); else #endif sk = __tcp_v4_lookup(th, saddr, th->source, daddr, th->dest, dev); /* this is not really correct: we should check sk->users */ if (sk && sk->state==TCP_LISTEN) { skb->sk = sk; atomic_add(skb->truesize, &sk->rmem_alloc); /* FIXME: Is the sequence number addition * of 128000 here enough for fast networks? * Also, does this reduce the security of * our tcp sequence numbers? */ tcp_conn_request(sk, skb, daddr, saddr,opt, dev,seq+128000); return 0; } kfree_skb(skb, FREE_READ); return 0; } #endif } rfc_step4: /* I'll clean this up later */ /* * We are now in normal data flow (see the step list in the RFC) * Note most of these are inline now. I'll inline the lot when * I have time to test it hard and look at what gcc outputs */ if (!tcp_sequence(sk, skb->seq, skb->end_seq-th->syn)) { bad_tcp_sequence(sk, th, skb->end_seq-th->syn, dev); kfree_skb(skb, FREE_READ); return 0; } if(th->rst) return tcp_reset(sk,skb); /* * Check for a SYN, and ensure it matches the SYN we were * first sent. We have to handle the rather unusual (but valid) * sequence that KA9Q derived products may generate of * * SYN * SYN|ACK Data * ACK (lost) * SYN|ACK Data + More Data * .. we must ACK not RST... * * We keep syn_seq as the sequence space occupied by the * original syn. */ if(th->syn && skb->seq!=sk->syn_seq) { tcp_send_reset(daddr,saddr,th, &tcp_prot, opt, dev,0, 255); return tcp_reset(sk,skb); } /* * Process the ACK */ if(!th->ack) { kfree_skb(skb, FREE_WRITE); return 0; } if(!tcp_ack(sk,th,skb->ack_seq,len)) { /* * Our three way handshake failed. */ if(sk->state==TCP_SYN_RECV) { tcp_send_reset(daddr, saddr, th,sk->prot, opt, dev,0,255); } kfree_skb(skb, FREE_READ); return 0; } rfc_step6: /* * If the accepted buffer put us over our queue size we * now drop it (we must process the ack first to avoid * deadlock cases). */ /* * Process urgent data */ tcp_urg(sk, th, len); /* * Process the encapsulated data */ if(tcp_data(skb,sk, saddr, len)) kfree_skb(skb, FREE_READ); /* * If we had a partial packet being help up due to * application of Nagle's rule we are now free to send it. */ if (was_ack && sk->packets_out == 0 && sk->partial != NULL && skb_queue_empty(&sk->write_queue) && sk->send_head == NULL) { tcp_send_partial(sk); } /* * If our receive queue has grown past its limits, * try to prune away duplicates etc.. */ if (sk->rmem_alloc > sk->rcvbuf) prune_queue(&sk->receive_queue); /* * And done */ return 0; no_tcp_socket: /* * No such TCB. If th->rst is 0 send a reset (checked in tcp_send_reset) */ tcp_send_reset(daddr, saddr, th, &tcp_prot, opt,dev,0,255); discard_it: /* * Discard frame */ skb->sk = NULL; kfree_skb(skb, FREE_READ); return 0; }