OpenCores
URL https://opencores.org/ocsvn/or1k_soc_on_altera_embedded_dev_kit/or1k_soc_on_altera_embedded_dev_kit/trunk

Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

[/] [or1k_soc_on_altera_embedded_dev_kit/] [tags/] [linux-2.6/] [linux-2.6.24_or32_unified_v2.3/] [Documentation/] [w1/] [masters/] [ds2482] - Rev 3

Go to most recent revision | Compare with Previous | Blame | View Log

Kernel driver ds2482
====================

Supported chips:
  * Maxim DS2482-100, Maxim DS2482-800
    Prefix: 'ds2482'
    Addresses scanned: None
    Datasheets:
        http://pdfserv.maxim-ic.com/en/ds/DS2482-100-DS2482S-100.pdf
        http://pdfserv.maxim-ic.com/en/ds/DS2482-800-DS2482S-800.pdf

Author: Ben Gardner <bgardner@wabtec.com>


Description
-----------

The Maxim/Dallas Semiconductor DS2482 is a I2C device that provides
one (DS2482-100) or eight (DS2482-800) 1-wire busses.


General Remarks
---------------

Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
However, the device cannot be detected without writing to the i2c bus, so no
detection is done.
You should force the device address.

$ modprobe ds2482 force=0,0x18

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.