Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

if ARCH_AT91

menu "Atmel AT91 System-on-Chip"

choice
        prompt "Atmel AT91 Processor"

config ARCH_AT91RM9200
        bool "AT91RM9200"
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS

config ARCH_AT91SAM9260
        bool "AT91SAM9260 or AT91SAM9XE"

config ARCH_AT91SAM9261
        bool "AT91SAM9261"

config ARCH_AT91SAM9263
        bool "AT91SAM9263"

config ARCH_AT91SAM9RL
        bool "AT91SAM9RL"

config ARCH_AT91X40
        bool "AT91x40"

endchoice

config AT91_PMC_UNIT
        bool
        default !ARCH_AT91X40

# ----------------------------------------------------------

if ARCH_AT91RM9200

comment "AT91RM9200 Board Type"

config MACH_ONEARM
        bool "Ajeco 1ARM Single Board Computer"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using Ajeco's 1ARM Single Board Computer.
          <http://www.ajeco.fi/products.htm>

config ARCH_AT91RM9200DK
        bool "Atmel AT91RM9200-DK Development board"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using Atmel's AT91RM9200-DK Development board.
          (Discontinued)

config MACH_AT91RM9200EK
        bool "Atmel AT91RM9200-EK Evaluation Kit"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>

config MACH_CSB337
        bool "Cogent CSB337"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using Cogent's CSB337 board.
          <http://www.cogcomp.com/csb_csb337.htm>

config MACH_CSB637
        bool "Cogent CSB637"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using Cogent's CSB637 board.
          <http://www.cogcomp.com/csb_csb637.htm>

config MACH_CARMEVA
        bool "Conitec ARM&EVA"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using Conitec's AT91RM9200-MCU-Module.
          <http://www.conitec.net/english/linuxboard.htm>

config MACH_ATEB9200
        bool "Embest ATEB9200"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using Embest's ATEB9200 board.
          <http://www.embedinfo.com/english/product/ATEB9200.asp>

config MACH_KB9200
        bool "KwikByte KB920x"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using KwikByte's KB920x board.
          <http://kwikbyte.com/KB9202_description_new.htm>

config MACH_PICOTUX2XX
        bool "picotux 200"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using a picotux 200.
          <http://www.picotux.com/>

config MACH_KAFA
        bool "Sperry-Sun KAFA board"
        depends on ARCH_AT91RM9200
        help
          Select this if you are using Sperry-Sun's KAFA board.

endif

# ----------------------------------------------------------

if ARCH_AT91SAM9260

comment "AT91SAM9260 Variants"

config ARCH_AT91SAM9260_SAM9XE
        bool "AT91SAM9XE"
        depends on ARCH_AT91SAM9260
        help
          Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
          They are basically AT91SAM9260s with various sizes of embedded Flash.

comment "AT91SAM9260 / AT91SAM9XE Board Type"

config MACH_AT91SAM9260EK
        bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
        depends on ARCH_AT91SAM9260
        help
          Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>

endif

# ----------------------------------------------------------

if ARCH_AT91SAM9261

comment "AT91SAM9261 Board Type"

config MACH_AT91SAM9261EK
        bool "Atmel AT91SAM9261-EK Evaluation Kit"
        depends on ARCH_AT91SAM9261
        help
          Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>

endif

# ----------------------------------------------------------

if ARCH_AT91SAM9263

comment "AT91SAM9263 Board Type"

config MACH_AT91SAM9263EK
        bool "Atmel AT91SAM9263-EK Evaluation Kit"
        depends on ARCH_AT91SAM9263
        help
          Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>

endif

# ----------------------------------------------------------

if ARCH_AT91SAM9RL

comment "AT91SAM9RL Board Type"

config MACH_AT91SAM9RLEK
        bool "Atmel AT91SAM9RL-EK Evaluation Kit"
        depends on ARCH_AT91SAM9RL
        help
          Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.

endif

# ----------------------------------------------------------

if ARCH_AT91X40

comment "AT91X40 Board Type"

config MACH_AT91EB01
        bool "Atmel AT91EB01 Evaluation Kit"
        help
          Select this if you are using Atmel's AT91EB01 Evaluation Kit.
          It is also a popular target for simulators such as GDB's
          ARM simulator (commonly known as the ARMulator) and the
          Skyeye simulator.

endif

# ----------------------------------------------------------

comment "AT91 Board Options"

config MTD_AT91_DATAFLASH_CARD
        bool "Enable DataFlash Card support"
        depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
        help
          Enable support for the DataFlash card.

config MTD_NAND_AT91_BUSWIDTH_16
        bool "Enable 16-bit data bus interface to NAND flash"
        depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
        help
          On AT91SAM926x boards both types of NAND flash can be present
          (8 and 16 bit data bus width).

# ----------------------------------------------------------

comment "AT91 Feature Selections"

config AT91_PROGRAMMABLE_CLOCKS
        bool "Programmable Clocks"
        help
          Select this if you need to program one or more of the PCK0..PCK3
          programmable clock outputs.

endmenu

endif