URL
https://opencores.org/ocsvn/or1k_soc_on_altera_embedded_dev_kit/or1k_soc_on_altera_embedded_dev_kit/trunk
Subversion Repositories or1k_soc_on_altera_embedded_dev_kit
[/] [or1k_soc_on_altera_embedded_dev_kit/] [trunk/] [linux-2.6/] [linux-2.6.24/] [arch/] [arm/] [mach-at91/] [board-1arm.c] - Rev 3
Compare with Previous | Blame | View Log
/* * linux/arch/arm/mach-at91/board-1arm.c * * Copyright (C) 2005 SAN People * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> #include <linux/init.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/platform_device.h> #include <asm/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/arch/board.h> #include <asm/arch/gpio.h> #include "generic.h" /* * Serial port configuration. * 0 .. 3 = USART0 .. USART3 * 4 = DBGU */ static struct at91_uart_config __initdata onearm_uart_config = { .console_tty = 0, /* ttyS0 */ .nr_tty = 3, .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */ }; static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); /* Setup the serial ports and console */ at91_init_serial(&onearm_uart_config); } static void __init onearm_init_irq(void) { at91rm9200_init_interrupts(NULL); } static struct at91_eth_data __initdata onearm_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, }; static struct at91_usbh_data __initdata onearm_usbh_data = { .ports = 1, }; static struct at91_udc_data __initdata onearm_udc_data = { .vbus_pin = AT91_PIN_PC2, .pullup_pin = AT91_PIN_PC3, }; static void __init onearm_board_init(void) { /* Serial */ at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&onearm_eth_data); /* USB Host */ at91_add_device_usbh(&onearm_usbh_data); /* USB Device */ at91_add_device_udc(&onearm_udc_data); } MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .phys_io = AT91_BASE_SYS, .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = onearm_map_io, .init_irq = onearm_init_irq, .init_machine = onearm_board_init, MACHINE_END