URL
https://opencores.org/ocsvn/or1k_soc_on_altera_embedded_dev_kit/or1k_soc_on_altera_embedded_dev_kit/trunk
Subversion Repositories or1k_soc_on_altera_embedded_dev_kit
[/] [or1k_soc_on_altera_embedded_dev_kit/] [trunk/] [linux-2.6/] [linux-2.6.24/] [arch/] [arm/] [mach-omap1/] [Kconfig] - Rev 17
Go to most recent revision | Compare with Previous | Blame | View Log
comment "OMAP Core Type"depends on ARCH_OMAP1config ARCH_OMAP730depends on ARCH_OMAP1bool "OMAP730 Based System"select ARCH_OMAP_OTGconfig ARCH_OMAP15XXdepends on ARCH_OMAP1default ybool "OMAP15xx Based System"config ARCH_OMAP16XXdepends on ARCH_OMAP1bool "OMAP16xx Based System"select ARCH_OMAP_OTGcomment "OMAP Board Type"depends on ARCH_OMAP1config MACH_OMAP_INNOVATORbool "TI Innovator"depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)select OMAP_MCBSPhelpTI OMAP 1510 or 1610 Innovator board support. Say Y here if youhave such a board.config MACH_OMAP_H2bool "TI H2 Support"depends on ARCH_OMAP1 && ARCH_OMAP16XXselect OMAP_MCBSPhelpTI OMAP 1610/1611B H2 board support. Say Y here if you have sucha board.config MACH_OMAP_H3bool "TI H3 Support"depends on ARCH_OMAP1 && ARCH_OMAP16XX# select GPIOEXPANDER_OMAPhelpTI OMAP 1710 H3 board support. Say Y here if you have sucha board.config MACH_OMAP_OSKbool "TI OSK Support"depends on ARCH_OMAP1 && ARCH_OMAP16XXselect OMAP_MCBSPhelpTI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y hereif you have such a board.config OMAP_OSK_MISTRALbool "Mistral QVGA board Support"depends on MACH_OMAP_OSKhelpThe OSK supports an optional add-on board with a Quarter-VGAtouchscreen, PDA-ish buttons, a resume button, bicolor LED,and camera connector. Say Y here if you have this board.config MACH_OMAP_PERSEUS2bool "TI Perseus2"depends on ARCH_OMAP1 && ARCH_OMAP730helpSupport for TI OMAP 730 Perseus2 board. Say Y here if you have sucha board.config MACH_OMAP_FSAMPLEbool "TI F-Sample"depends on ARCH_OMAP1 && ARCH_OMAP730helpSupport for TI OMAP 850 F-Sample board. Say Y here if you have sucha board.config MACH_VOICEBLUEbool "Voiceblue"depends on ARCH_OMAP1 && ARCH_OMAP15XXhelpSupport for Voiceblue GSM/VoIP gateway. Say Y here if you havesuch a board.config MACH_OMAP_PALMTEbool "Palm Tungsten E"depends on ARCH_OMAP1 && ARCH_OMAP15XXhelpSupport for the Palm Tungsten E PDA. To boot the kernel, you'llneed a PalmOS compatible bootloader; check outhttp://palmtelinux.sourceforge.net/ for more information.Say Y here if you have this PDA model, say N otherwise.config MACH_OMAP_PALMZ71bool "Palm Zire71"depends on ARCH_OMAP1 && ARCH_OMAP15XXhelpSupport for the Palm Zire71 PDA. To boot the kernel,you'll need a PalmOS compatible bootloader; check outhttp://hackndev.com/palm/z71 for more informations.Say Y here if you have such a PDA, say N otherwise.config MACH_OMAP_PALMTTbool "Palm Tungsten|T"depends on ARCH_OMAP1 && ARCH_OMAP15XXhelpSupport for the Palm Tungsten|T PDA. To boot the kernel, you'llneed a PalmOS compatible bootloader (Garux); check outhttp://www.hackndev.com/palm/tt/ for more information.Say Y here if you have this PDA model, say N otherwise.config MACH_SX1bool "Siemens SX1"depends on ARCH_OMAP1 && ARCH_OMAP15XXhelpSupport for the Siemens SX1 phone. To boot the kernel,you'll need a SX1 compatible bootloader; check outhttp://forum.oslik.ru andhttp://www.handhelds.org/moin/moin.cgi/SiemensSX1for more information.Say Y here if you have such a phone, say NO otherwise.config MACH_NOKIA770bool "Nokia 770"depends on ARCH_OMAP1 && ARCH_OMAP16XXhelpSupport for the Nokia 770 Internet Tablet. Say Y here if youhave such a device.config MACH_AMS_DELTAbool "Amstrad E3 (Delta)"depends on ARCH_OMAP1 && ARCH_OMAP15XXhelpSupport for the Amstrad E3 (codename Delta) videophone. Say Y hereif you have such a device.config MACH_OMAP_GENERICbool "Generic OMAP board"depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)helpSupport for generic OMAP-1510, 1610 or 1710 board withno FPGA. Can be used as template for porting Linux tocustom OMAP boards. Say Y here if you have a customboard.comment "OMAP CPU Speed"depends on ARCH_OMAP1config OMAP_CLOCKS_SET_BY_BOOTLOADERbool "OMAP clocks set by bootloader"depends on ARCH_OMAP1helpEnable this option to prevent the kernel from overriding the clockfrequencies programmed by bootloader for MPU, DSP, MMUs, TC,internal LCD controller and MPU peripherals.config OMAP_ARM_216MHZbool "OMAP ARM 216 MHz CPU (1710 only)"depends on ARCH_OMAP1 && ARCH_OMAP16XXhelpEnable 216 MHz clock for OMAP1710 CPU. If unsure, say N.config OMAP_ARM_195MHZbool "OMAP ARM 195 MHz CPU"depends on ARCH_OMAP1 && ARCH_OMAP730helpEnable 195MHz clock for OMAP CPU. If unsure, say N.config OMAP_ARM_192MHZbool "OMAP ARM 192 MHz CPU"depends on ARCH_OMAP1 && ARCH_OMAP16XXhelpEnable 192MHz clock for OMAP CPU. If unsure, say N.config OMAP_ARM_182MHZbool "OMAP ARM 182 MHz CPU"depends on ARCH_OMAP1 && ARCH_OMAP730helpEnable 182MHz clock for OMAP CPU. If unsure, say N.config OMAP_ARM_168MHZbool "OMAP ARM 168 MHz CPU"depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)helpEnable 168MHz clock for OMAP CPU. If unsure, say N.config OMAP_ARM_150MHZbool "OMAP ARM 150 MHz CPU"depends on ARCH_OMAP1 && ARCH_OMAP15XXhelpEnable 150MHz clock for OMAP CPU. If unsure, say N.config OMAP_ARM_120MHZbool "OMAP ARM 120 MHz CPU"depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)helpEnable 120MHz clock for OMAP CPU. If unsure, say N.config OMAP_ARM_60MHZbool "OMAP ARM 60 MHz CPU"depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)default yhelpEnable 60MHz clock for OMAP CPU. If unsure, say Y.config OMAP_ARM_30MHZbool "OMAP ARM 30 MHz CPU"depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)helpEnable 30MHz clock for OMAP CPU. If unsure, say N.
Go to most recent revision | Compare with Previous | Blame | View Log