URL
https://opencores.org/ocsvn/or1k_soc_on_altera_embedded_dev_kit/or1k_soc_on_altera_embedded_dev_kit/trunk
Subversion Repositories or1k_soc_on_altera_embedded_dev_kit
[/] [or1k_soc_on_altera_embedded_dev_kit/] [trunk/] [linux-2.6/] [linux-2.6.24/] [arch/] [ppc/] [syslib/] [ocp.c] - Rev 3
Compare with Previous | Blame | View Log
/* * ocp.c * * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org) * Mipsys - France * * Derived from work (c) Armin Kuster akuster@pacbell.net * * Additional support and port to 2.6 LDM/sysfs by * Matt Porter <mporter@kernel.crashing.org> * Copyright 2004 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * OCP (On Chip Peripheral) is a software emulated "bus" with a * pseudo discovery method for dumb peripherals. Usually these type * of peripherals are found on embedded SoC (System On a Chip) * processors or highly integrated system controllers that have * a host bridge and many peripherals. Common examples where * this is already used include the PPC4xx, PPC85xx, MPC52xx, * and MV64xxx parts. * * This subsystem creates a standard OCP bus type within the * device model. The devices on the OCP bus are seeded by an * an initial OCP device array created by the arch-specific * Device entries can be added/removed/modified through OCP * helper functions to accommodate system and board-specific * parameters commonly found in embedded systems. OCP also * provides a standard method for devices to describe extended * attributes about themselves to the system. A standard access * method allows OCP drivers to obtain the information, both * SoC-specific and system/board-specific, needed for operation. */ #include <linux/module.h> #include <linux/list.h> #include <linux/miscdevice.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/init.h> #include <linux/pm.h> #include <linux/bootmem.h> #include <linux/device.h> #include <linux/rwsem.h> #include <asm/io.h> #include <asm/ocp.h> #include <asm/errno.h> #include <asm/semaphore.h> //#define DBG(x) printk x #define DBG(x) extern int mem_init_done; extern struct ocp_def core_ocp[]; /* Static list of devices, provided by CPU core */ LIST_HEAD(ocp_devices); /* List of all OCP devices */ DECLARE_RWSEM(ocp_devices_sem); /* Global semaphores for those lists */ static int ocp_inited; /* Sysfs support */ #define OCP_DEF_ATTR(field, format_string) \ static ssize_t \ show_##field(struct device *dev, struct device_attribute *attr, char *buf) \ { \ struct ocp_device *odev = to_ocp_dev(dev); \ \ return sprintf(buf, format_string, odev->def->field); \ } \ static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL); OCP_DEF_ATTR(vendor, "0x%04x\n"); OCP_DEF_ATTR(function, "0x%04x\n"); OCP_DEF_ATTR(index, "0x%04x\n"); #ifdef CONFIG_PTE_64BIT OCP_DEF_ATTR(paddr, "0x%016Lx\n"); #else OCP_DEF_ATTR(paddr, "0x%08lx\n"); #endif OCP_DEF_ATTR(irq, "%d\n"); OCP_DEF_ATTR(pm, "%lu\n"); void ocp_create_sysfs_dev_files(struct ocp_device *odev) { struct device *dev = &odev->dev; /* Current OCP device def attributes */ device_create_file(dev, &dev_attr_vendor); device_create_file(dev, &dev_attr_function); device_create_file(dev, &dev_attr_index); device_create_file(dev, &dev_attr_paddr); device_create_file(dev, &dev_attr_irq); device_create_file(dev, &dev_attr_pm); /* Current OCP device additions attributes */ if (odev->def->additions && odev->def->show) odev->def->show(dev); } /** * ocp_device_match - Match one driver to one device * @drv: driver to match * @dev: device to match * * This function returns 0 if the driver and device don't match */ static int ocp_device_match(struct device *dev, struct device_driver *drv) { struct ocp_device *ocp_dev = to_ocp_dev(dev); struct ocp_driver *ocp_drv = to_ocp_drv(drv); const struct ocp_device_id *ids = ocp_drv->id_table; if (!ids) return 0; while (ids->vendor || ids->function) { if ((ids->vendor == OCP_ANY_ID || ids->vendor == ocp_dev->def->vendor) && (ids->function == OCP_ANY_ID || ids->function == ocp_dev->def->function)) return 1; ids++; } return 0; } static int ocp_device_probe(struct device *dev) { int error = 0; struct ocp_driver *drv; struct ocp_device *ocp_dev; drv = to_ocp_drv(dev->driver); ocp_dev = to_ocp_dev(dev); if (drv->probe) { error = drv->probe(ocp_dev); if (error >= 0) { ocp_dev->driver = drv; error = 0; } } return error; } static int ocp_device_remove(struct device *dev) { struct ocp_device *ocp_dev = to_ocp_dev(dev); if (ocp_dev->driver) { if (ocp_dev->driver->remove) ocp_dev->driver->remove(ocp_dev); ocp_dev->driver = NULL; } return 0; } static int ocp_device_suspend(struct device *dev, pm_message_t state) { struct ocp_device *ocp_dev = to_ocp_dev(dev); struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver); if (dev->driver && ocp_drv->suspend) return ocp_drv->suspend(ocp_dev, state); return 0; } static int ocp_device_resume(struct device *dev) { struct ocp_device *ocp_dev = to_ocp_dev(dev); struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver); if (dev->driver && ocp_drv->resume) return ocp_drv->resume(ocp_dev); return 0; } struct bus_type ocp_bus_type = { .name = "ocp", .match = ocp_device_match, .probe = ocp_device_probe, .remove = ocp_device_remove, .suspend = ocp_device_suspend, .resume = ocp_device_resume, }; /** * ocp_register_driver - Register an OCP driver * @drv: pointer to statically defined ocp_driver structure * * The driver's probe() callback is called either recursively * by this function or upon later call of ocp_driver_init * * NOTE: Detection of devices is a 2 pass step on this implementation, * hotswap isn't supported. First, all OCP devices are put in the device * list, _then_ all drivers are probed on each match. */ int ocp_register_driver(struct ocp_driver *drv) { /* initialize common driver fields */ drv->driver.name = drv->name; drv->driver.bus = &ocp_bus_type; /* register with core */ return driver_register(&drv->driver); } /** * ocp_unregister_driver - Unregister an OCP driver * @drv: pointer to statically defined ocp_driver structure * * The driver's remove() callback is called recursively * by this function for any device already registered */ void ocp_unregister_driver(struct ocp_driver *drv) { DBG(("ocp: ocp_unregister_driver(%s)...\n", drv->name)); driver_unregister(&drv->driver); DBG(("ocp: ocp_unregister_driver(%s)... done.\n", drv->name)); } /* Core of ocp_find_device(). Caller must hold ocp_devices_sem */ static struct ocp_device * __ocp_find_device(unsigned int vendor, unsigned int function, int index) { struct list_head *entry; struct ocp_device *dev, *found = NULL; DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index)); list_for_each(entry, &ocp_devices) { dev = list_entry(entry, struct ocp_device, link); if (vendor != OCP_ANY_ID && vendor != dev->def->vendor) continue; if (function != OCP_ANY_ID && function != dev->def->function) continue; if (index != OCP_ANY_INDEX && index != dev->def->index) continue; found = dev; break; } DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)... done\n", vendor, function, index)); return found; } /** * ocp_find_device - Find a device by function & index * @vendor: vendor ID of the device (or OCP_ANY_ID) * @function: function code of the device (or OCP_ANY_ID) * @idx: index of the device (or OCP_ANY_INDEX) * * This function allows a lookup of a given function by it's * index, it's typically used to find the MAL or ZMII associated * with an EMAC or similar horrors. * You can pass vendor, though you usually want OCP_ANY_ID there... */ struct ocp_device * ocp_find_device(unsigned int vendor, unsigned int function, int index) { struct ocp_device *dev; down_read(&ocp_devices_sem); dev = __ocp_find_device(vendor, function, index); up_read(&ocp_devices_sem); return dev; } /** * ocp_get_one_device - Find a def by function & index * @vendor: vendor ID of the device (or OCP_ANY_ID) * @function: function code of the device (or OCP_ANY_ID) * @idx: index of the device (or OCP_ANY_INDEX) * * This function allows a lookup of a given ocp_def by it's * vendor, function, and index. The main purpose for is to * allow modification of the def before binding to the driver */ struct ocp_def * ocp_get_one_device(unsigned int vendor, unsigned int function, int index) { struct ocp_device *dev; struct ocp_def *found = NULL; DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index)); dev = ocp_find_device(vendor, function, index); if (dev) found = dev->def; DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index)); return found; } /** * ocp_add_one_device - Add a device * @def: static device definition structure * * This function adds a device definition to the * device list. It may only be called before * ocp_driver_init() and will return an error * otherwise. */ int ocp_add_one_device(struct ocp_def *def) { struct ocp_device *dev; DBG(("ocp: ocp_add_one_device()...\n")); /* Can't be called after ocp driver init */ if (ocp_inited) return 1; if (mem_init_done) dev = kmalloc(sizeof(*dev), GFP_KERNEL); else dev = alloc_bootmem(sizeof(*dev)); if (dev == NULL) return 1; memset(dev, 0, sizeof(*dev)); dev->def = def; dev->current_state = 4; sprintf(dev->name, "OCP device %04x:%04x:%04x", dev->def->vendor, dev->def->function, dev->def->index); down_write(&ocp_devices_sem); list_add_tail(&dev->link, &ocp_devices); up_write(&ocp_devices_sem); DBG(("ocp: ocp_add_one_device()...done\n")); return 0; } /** * ocp_remove_one_device - Remove a device by function & index * @vendor: vendor ID of the device (or OCP_ANY_ID) * @function: function code of the device (or OCP_ANY_ID) * @idx: index of the device (or OCP_ANY_INDEX) * * This function allows removal of a given function by its * index. It may only be called before ocp_driver_init() * and will return an error otherwise. */ int ocp_remove_one_device(unsigned int vendor, unsigned int function, int index) { struct ocp_device *dev; DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index)); /* Can't be called after ocp driver init */ if (ocp_inited) return 1; down_write(&ocp_devices_sem); dev = __ocp_find_device(vendor, function, index); list_del((struct list_head *)dev); up_write(&ocp_devices_sem); DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index)); return 0; } /** * ocp_for_each_device - Iterate over OCP devices * @callback: routine to execute for each ocp device. * @arg: user data to be passed to callback routine. * * This routine holds the ocp_device semaphore, so the * callback routine cannot modify the ocp_device list. */ void ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg) { struct list_head *entry; if (callback) { down_read(&ocp_devices_sem); list_for_each(entry, &ocp_devices) callback(list_entry(entry, struct ocp_device, link), arg); up_read(&ocp_devices_sem); } } /** * ocp_early_init - Init OCP device management * * This function builds the list of devices before setup_arch. * This allows platform code to modify the device lists before * they are bound to drivers (changes to paddr, removing devices * etc) */ int __init ocp_early_init(void) { struct ocp_def *def; DBG(("ocp: ocp_early_init()...\n")); /* Fill the devices list */ for (def = core_ocp; def->vendor != OCP_VENDOR_INVALID; def++) ocp_add_one_device(def); DBG(("ocp: ocp_early_init()... done.\n")); return 0; } /** * ocp_driver_init - Init OCP device management * * This function is meant to be called via OCP bus registration. */ static int __init ocp_driver_init(void) { int ret = 0, index = 0; struct device *ocp_bus; struct list_head *entry; struct ocp_device *dev; if (ocp_inited) return ret; ocp_inited = 1; DBG(("ocp: ocp_driver_init()...\n")); /* Allocate/register primary OCP bus */ ocp_bus = kzalloc(sizeof(struct device), GFP_KERNEL); if (ocp_bus == NULL) return 1; strcpy(ocp_bus->bus_id, "ocp"); bus_register(&ocp_bus_type); device_register(ocp_bus); /* Put each OCP device into global device list */ list_for_each(entry, &ocp_devices) { dev = list_entry(entry, struct ocp_device, link); sprintf(dev->dev.bus_id, "%2.2x", index); dev->dev.parent = ocp_bus; dev->dev.bus = &ocp_bus_type; device_register(&dev->dev); ocp_create_sysfs_dev_files(dev); index++; } DBG(("ocp: ocp_driver_init()... done.\n")); return 0; } postcore_initcall(ocp_driver_init); EXPORT_SYMBOL(ocp_bus_type); EXPORT_SYMBOL(ocp_find_device); EXPORT_SYMBOL(ocp_register_driver); EXPORT_SYMBOL(ocp_unregister_driver);