Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

/* linux/arch/sparc/kernel/time.c
 *
 * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
 * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
 *
 * Chris Davis (cdavis@cois.on.ca) 03/27/1998
 * Added support for the intersil on the sun4/4200
 *
 * Gleb Raiko (rajko@mech.math.msu.su) 08/18/1998
 * Support for MicroSPARC-IIep, PCI CPU.
 *
 * This file handles the Sparc specific time handling details.
 *
 * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
 *		"A Kernel Model for Precision Timekeeping" by Dave Mills
 */
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/profile.h>
 
#include <asm/oplib.h>
#include <asm/timer.h>
#include <asm/mostek.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/idprom.h>
#include <asm/machines.h>
#include <asm/sun4paddr.h>
#include <asm/page.h>
#include <asm/pcic.h>
#include <asm/of_device.h>
#include <asm/irq_regs.h>
 
#include "irq.h"
 
DEFINE_SPINLOCK(rtc_lock);
enum sparc_clock_type sp_clock_typ;
DEFINE_SPINLOCK(mostek_lock);
void __iomem *mstk48t02_regs = NULL;
static struct mostek48t08 __iomem *mstk48t08_regs = NULL;
static int set_rtc_mmss(unsigned long);
static int sbus_do_settimeofday(struct timespec *tv);
 
#ifdef CONFIG_SUN4
struct intersil *intersil_clock;
#define intersil_cmd(intersil_reg, intsil_cmd) intersil_reg->int_cmd_reg = \
	(intsil_cmd)
 
#define intersil_intr(intersil_reg, intsil_cmd) intersil_reg->int_intr_reg = \
	(intsil_cmd)
 
#define intersil_start(intersil_reg) intersil_cmd(intersil_reg, \
	( INTERSIL_START | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\
	  INTERSIL_INTR_ENABLE))
 
#define intersil_stop(intersil_reg) intersil_cmd(intersil_reg, \
	( INTERSIL_STOP | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\
	  INTERSIL_INTR_ENABLE))
 
#define intersil_read_intr(intersil_reg, towhere) towhere = \
	intersil_reg->int_intr_reg
 
#endif
 
unsigned long profile_pc(struct pt_regs *regs)
{
	extern char __copy_user_begin[], __copy_user_end[];
	extern char __atomic_begin[], __atomic_end[];
	extern char __bzero_begin[], __bzero_end[];
 
	unsigned long pc = regs->pc;
 
	if (in_lock_functions(pc) ||
	    (pc >= (unsigned long) __copy_user_begin &&
	     pc < (unsigned long) __copy_user_end) ||
	    (pc >= (unsigned long) __atomic_begin &&
	     pc < (unsigned long) __atomic_end) ||
	    (pc >= (unsigned long) __bzero_begin &&
	     pc < (unsigned long) __bzero_end))
		pc = regs->u_regs[UREG_RETPC];
	return pc;
}
 
EXPORT_SYMBOL(profile_pc);
 
__volatile__ unsigned int *master_l10_counter;
__volatile__ unsigned int *master_l10_limit;
 
/*
 * timer_interrupt() needs to keep up the real-time clock,
 * as well as call the "do_timer()" routine every clocktick
 */
 
#define TICK_SIZE (tick_nsec / 1000)
 
irqreturn_t timer_interrupt(int irq, void *dev_id)
{
	/* last time the cmos clock got updated */
	static long last_rtc_update;
 
#ifndef CONFIG_SMP
	profile_tick(CPU_PROFILING);
#endif
 
	/* Protect counter clear so that do_gettimeoffset works */
	write_seqlock(&xtime_lock);
#ifdef CONFIG_SUN4
	if((idprom->id_machtype == (SM_SUN4 | SM_4_260)) ||
	   (idprom->id_machtype == (SM_SUN4 | SM_4_110))) {
		int temp;
        	intersil_read_intr(intersil_clock, temp);
		/* re-enable the irq */
		enable_pil_irq(10);
	}
#endif
	clear_clock_irq();
 
	do_timer(1);
#ifndef CONFIG_SMP
	update_process_times(user_mode(get_irq_regs()));
#endif
 
 
	/* Determine when to update the Mostek clock. */
	if (ntp_synced() &&
	    xtime.tv_sec > last_rtc_update + 660 &&
	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
	  if (set_rtc_mmss(xtime.tv_sec) == 0)
	    last_rtc_update = xtime.tv_sec;
	  else
	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
	}
	write_sequnlock(&xtime_lock);
 
	return IRQ_HANDLED;
}
 
/* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */
static void __devinit kick_start_clock(void)
{
	struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
	unsigned char sec;
	int i, count;
 
	prom_printf("CLOCK: Clock was stopped. Kick start ");
 
	spin_lock_irq(&mostek_lock);
 
	/* Turn on the kick start bit to start the oscillator. */
	regs->creg |= MSTK_CREG_WRITE;
	regs->sec &= ~MSTK_STOP;
	regs->hour |= MSTK_KICK_START;
	regs->creg &= ~MSTK_CREG_WRITE;
 
	spin_unlock_irq(&mostek_lock);
 
	/* Delay to allow the clock oscillator to start. */
	sec = MSTK_REG_SEC(regs);
	for (i = 0; i < 3; i++) {
		while (sec == MSTK_REG_SEC(regs))
			for (count = 0; count < 100000; count++)
				/* nothing */ ;
		prom_printf(".");
		sec = regs->sec;
	}
	prom_printf("\n");
 
	spin_lock_irq(&mostek_lock);
 
	/* Turn off kick start and set a "valid" time and date. */
	regs->creg |= MSTK_CREG_WRITE;
	regs->hour &= ~MSTK_KICK_START;
	MSTK_SET_REG_SEC(regs,0);
	MSTK_SET_REG_MIN(regs,0);
	MSTK_SET_REG_HOUR(regs,0);
	MSTK_SET_REG_DOW(regs,5);
	MSTK_SET_REG_DOM(regs,1);
	MSTK_SET_REG_MONTH(regs,8);
	MSTK_SET_REG_YEAR(regs,1996 - MSTK_YEAR_ZERO);
	regs->creg &= ~MSTK_CREG_WRITE;
 
	spin_unlock_irq(&mostek_lock);
 
	/* Ensure the kick start bit is off. If it isn't, turn it off. */
	while (regs->hour & MSTK_KICK_START) {
		prom_printf("CLOCK: Kick start still on!\n");
 
		spin_lock_irq(&mostek_lock);
		regs->creg |= MSTK_CREG_WRITE;
		regs->hour &= ~MSTK_KICK_START;
		regs->creg &= ~MSTK_CREG_WRITE;
		spin_unlock_irq(&mostek_lock);
	}
 
	prom_printf("CLOCK: Kick start procedure successful.\n");
}
 
/* Return nonzero if the clock chip battery is low. */
static inline int has_low_battery(void)
{
	struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
	unsigned char data1, data2;
 
	spin_lock_irq(&mostek_lock);
	data1 = regs->eeprom[0];	/* Read some data. */
	regs->eeprom[0] = ~data1;	/* Write back the complement. */
	data2 = regs->eeprom[0];	/* Read back the complement. */
	regs->eeprom[0] = data1;	/* Restore the original value. */
	spin_unlock_irq(&mostek_lock);
 
	return (data1 == data2);	/* Was the write blocked? */
}
 
static void __devinit mostek_set_system_time(void)
{
	unsigned int year, mon, day, hour, min, sec;
	struct mostek48t02 *mregs;
 
	mregs = (struct mostek48t02 *)mstk48t02_regs;
	if(!mregs) {
		prom_printf("Something wrong, clock regs not mapped yet.\n");
		prom_halt();
	}		
	spin_lock_irq(&mostek_lock);
	mregs->creg |= MSTK_CREG_READ;
	sec = MSTK_REG_SEC(mregs);
	min = MSTK_REG_MIN(mregs);
	hour = MSTK_REG_HOUR(mregs);
	day = MSTK_REG_DOM(mregs);
	mon = MSTK_REG_MONTH(mregs);
	year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
        set_normalized_timespec(&wall_to_monotonic,
                                -xtime.tv_sec, -xtime.tv_nsec);
	mregs->creg &= ~MSTK_CREG_READ;
	spin_unlock_irq(&mostek_lock);
}
 
/* Probe for the real time clock chip on Sun4 */
static inline void sun4_clock_probe(void)
{
#ifdef CONFIG_SUN4
	int temp;
	struct resource r;
 
	memset(&r, 0, sizeof(r));
	if( idprom->id_machtype == (SM_SUN4 | SM_4_330) ) {
		sp_clock_typ = MSTK48T02;
		r.start = sun4_clock_physaddr;
		mstk48t02_regs = sbus_ioremap(&r, 0,
				       sizeof(struct mostek48t02), NULL);
		mstk48t08_regs = NULL;  /* To catch weirdness */
		intersil_clock = NULL;  /* just in case */
 
		/* Kick start the clock if it is completely stopped. */
		if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
			kick_start_clock();
	} else if( idprom->id_machtype == (SM_SUN4 | SM_4_260)) {
		/* intersil setup code */
		printk("Clock: INTERSIL at %8x ",sun4_clock_physaddr);
		sp_clock_typ = INTERSIL;
		r.start = sun4_clock_physaddr;
		intersil_clock = (struct intersil *) 
		    sbus_ioremap(&r, 0, sizeof(*intersil_clock), "intersil");
		mstk48t02_regs = 0;  /* just be sure */
		mstk48t08_regs = NULL;  /* ditto */
		/* initialise the clock */
 
		intersil_intr(intersil_clock,INTERSIL_INT_100HZ);
 
		intersil_start(intersil_clock);
 
		intersil_read_intr(intersil_clock, temp);
                while (!(temp & 0x80))
                        intersil_read_intr(intersil_clock, temp);
 
                intersil_read_intr(intersil_clock, temp);
                while (!(temp & 0x80))
                        intersil_read_intr(intersil_clock, temp);
 
		intersil_stop(intersil_clock);
 
	}
#endif
}
 
#ifndef CONFIG_SUN4
static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
{
	struct device_node *dp = op->node;
	const char *model = of_get_property(dp, "model", NULL);
 
	if (!model)
		return -ENODEV;
 
	if (!strcmp(model, "mk48t02")) {
		sp_clock_typ = MSTK48T02;
 
		/* Map the clock register io area read-only */
		mstk48t02_regs = of_ioremap(&op->resource[0], 0,
					    sizeof(struct mostek48t02),
					    "mk48t02");
		mstk48t08_regs = NULL;  /* To catch weirdness */
	} else if (!strcmp(model, "mk48t08")) {
		sp_clock_typ = MSTK48T08;
		mstk48t08_regs = of_ioremap(&op->resource[0], 0,
					    sizeof(struct mostek48t08),
					    "mk48t08");
 
		mstk48t02_regs = &mstk48t08_regs->regs;
	} else
		return -ENODEV;
 
	/* Report a low battery voltage condition. */
	if (has_low_battery())
		printk(KERN_CRIT "NVRAM: Low battery voltage!\n");
 
	/* Kick start the clock if it is completely stopped. */
	if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
		kick_start_clock();
 
	mostek_set_system_time();
 
	return 0;
}
 
static struct of_device_id clock_match[] = {
	{
		.name = "eeprom",
	},
	{},
};
 
static struct of_platform_driver clock_driver = {
	.match_table	= clock_match,
	.probe		= clock_probe,
	.driver		= {
		.name	= "clock",
	},
};
 
 
/* Probe for the mostek real time clock chip. */
static int __init clock_init(void)
{
	return of_register_driver(&clock_driver, &of_platform_bus_type);
}
 
/* Must be after subsys_initcall() so that busses are probed.  Must
 * be before device_initcall() because things like the RTC driver
 * need to see the clock registers.
 */
fs_initcall(clock_init);
#endif /* !CONFIG_SUN4 */
 
void __init sbus_time_init(void)
{
 
	BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
	btfixup();
 
	if (ARCH_SUN4)
		sun4_clock_probe();
 
	sparc_init_timers(timer_interrupt);
 
#ifdef CONFIG_SUN4
	if(idprom->id_machtype == (SM_SUN4 | SM_4_330)) {
		mostek_set_system_time();
	} else if(idprom->id_machtype == (SM_SUN4 | SM_4_260) ) {
		/* initialise the intersil on sun4 */
		unsigned int year, mon, day, hour, min, sec;
		int temp;
		struct intersil *iregs;
 
		iregs=intersil_clock;
		if(!iregs) {
			prom_printf("Something wrong, clock regs not mapped yet.\n");
			prom_halt();
		}
 
		intersil_intr(intersil_clock,INTERSIL_INT_100HZ);
		disable_pil_irq(10);
		intersil_stop(iregs);
		intersil_read_intr(intersil_clock, temp);
 
		temp = iregs->clk.int_csec;
 
		sec = iregs->clk.int_sec;
		min = iregs->clk.int_min;
		hour = iregs->clk.int_hour;
		day = iregs->clk.int_day;
		mon = iregs->clk.int_month;
		year = MSTK_CVT_YEAR(iregs->clk.int_year);
 
		enable_pil_irq(10);
		intersil_start(iregs);
 
		xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
		xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
	        set_normalized_timespec(&wall_to_monotonic,
 	                               -xtime.tv_sec, -xtime.tv_nsec);
		printk("%u/%u/%u %u:%u:%u\n",day,mon,year,hour,min,sec);
	}
#endif
 
	/* Now that OBP ticker has been silenced, it is safe to enable IRQ. */
	local_irq_enable();
}
 
void __init time_init(void)
{
#ifdef CONFIG_PCI
	extern void pci_time_init(void);
	if (pcic_present()) {
		pci_time_init();
		return;
	}
#endif
	sbus_time_init();
}
 
static inline unsigned long do_gettimeoffset(void)
{
	unsigned long val = *master_l10_counter;
	unsigned long usec = (val >> 10) & 0x1fffff;
 
	/* Limit hit?  */
	if (val & 0x80000000)
		usec += 1000000 / HZ;
 
	return usec;
}
 
/* Ok, my cute asm atomicity trick doesn't work anymore.
 * There are just too many variables that need to be protected
 * now (both members of xtime, et al.)
 */
void do_gettimeofday(struct timeval *tv)
{
	unsigned long flags;
	unsigned long seq;
	unsigned long usec, sec;
	unsigned long max_ntp_tick = tick_usec - tickadj;
 
	do {
		seq = read_seqbegin_irqsave(&xtime_lock, flags);
		usec = do_gettimeoffset();
 
		/*
		 * If time_adjust is negative then NTP is slowing the clock
		 * so make sure not to go into next possible interval.
		 * Better to lose some accuracy than have time go backwards..
		 */
		if (unlikely(time_adjust < 0))
			usec = min(usec, max_ntp_tick);
 
		sec = xtime.tv_sec;
		usec += (xtime.tv_nsec / 1000);
	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 
	while (usec >= 1000000) {
		usec -= 1000000;
		sec++;
	}
 
	tv->tv_sec = sec;
	tv->tv_usec = usec;
}
 
EXPORT_SYMBOL(do_gettimeofday);
 
int do_settimeofday(struct timespec *tv)
{
	int ret;
 
	write_seqlock_irq(&xtime_lock);
	ret = bus_do_settimeofday(tv);
	write_sequnlock_irq(&xtime_lock);
	clock_was_set();
	return ret;
}
 
EXPORT_SYMBOL(do_settimeofday);
 
static int sbus_do_settimeofday(struct timespec *tv)
{
	time_t wtm_sec, sec = tv->tv_sec;
	long wtm_nsec, nsec = tv->tv_nsec;
 
	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
		return -EINVAL;
 
	/*
	 * This is revolting. We need to set "xtime" correctly. However, the
	 * value in this location is the value at the most recent update of
	 * wall time.  Discover what correction gettimeofday() would have
	 * made, and then undo it!
	 */
	nsec -= 1000 * do_gettimeoffset();
 
	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
 
	set_normalized_timespec(&xtime, sec, nsec);
	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
	ntp_clear();
	return 0;
}
 
/*
 * BUG: This routine does not handle hour overflow properly; it just
 *      sets the minutes. Usually you won't notice until after reboot!
 */
static int set_rtc_mmss(unsigned long nowtime)
{
	int real_seconds, real_minutes, mostek_minutes;
	struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
	unsigned long flags;
#ifdef CONFIG_SUN4
	struct intersil *iregs = intersil_clock;
	int temp;
#endif
 
	/* Not having a register set can lead to trouble. */
	if (!regs) {
#ifdef CONFIG_SUN4
		if(!iregs)
		return -1;
	 	else {
			temp = iregs->clk.int_csec;
 
			mostek_minutes = iregs->clk.int_min;
 
			real_seconds = nowtime % 60;
			real_minutes = nowtime / 60;
			if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1)
				real_minutes += 30;	/* correct for half hour time zone */
			real_minutes %= 60;
 
			if (abs(real_minutes - mostek_minutes) < 30) {
				intersil_stop(iregs);
				iregs->clk.int_sec=real_seconds;
				iregs->clk.int_min=real_minutes;
				intersil_start(iregs);
			} else {
				printk(KERN_WARNING
			       "set_rtc_mmss: can't update from %d to %d\n",
				       mostek_minutes, real_minutes);
				return -1;
			}
 
			return 0;
		}
#endif
	}
 
	spin_lock_irqsave(&mostek_lock, flags);
	/* Read the current RTC minutes. */
	regs->creg |= MSTK_CREG_READ;
	mostek_minutes = MSTK_REG_MIN(regs);
	regs->creg &= ~MSTK_CREG_READ;
 
	/*
	 * since we're only adjusting minutes and seconds,
	 * don't interfere with hour overflow. This avoids
	 * messing with unknown time zones but requires your
	 * RTC not to be off by more than 15 minutes
	 */
	real_seconds = nowtime % 60;
	real_minutes = nowtime / 60;
	if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1)
		real_minutes += 30;	/* correct for half hour time zone */
	real_minutes %= 60;
 
	if (abs(real_minutes - mostek_minutes) < 30) {
		regs->creg |= MSTK_CREG_WRITE;
		MSTK_SET_REG_SEC(regs,real_seconds);
		MSTK_SET_REG_MIN(regs,real_minutes);
		regs->creg &= ~MSTK_CREG_WRITE;
		spin_unlock_irqrestore(&mostek_lock, flags);
		return 0;
	} else {
		spin_unlock_irqrestore(&mostek_lock, flags);
		return -1;
	}
}