URL
https://opencores.org/ocsvn/or1k_soc_on_altera_embedded_dev_kit/or1k_soc_on_altera_embedded_dev_kit/trunk
Subversion Repositories or1k_soc_on_altera_embedded_dev_kit
[/] [or1k_soc_on_altera_embedded_dev_kit/] [trunk/] [linux-2.6/] [linux-2.6.24/] [arch/] [x86/] [kernel/] [scx200_32.c] - Rev 3
Compare with Previous | Blame | View Log
/* * Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> * * National Semiconductor SCx200 support. */ #include <linux/module.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mutex.h> #include <linux/pci.h> #include <linux/scx200.h> #include <linux/scx200_gpio.h> /* Verify that the configuration block really is there */ #define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) #define NAME "scx200" MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); MODULE_DESCRIPTION("NatSemi SCx200 Driver"); MODULE_LICENSE("GPL"); unsigned scx200_gpio_base = 0; unsigned long scx200_gpio_shadow[2]; unsigned scx200_cb_base = 0; static struct pci_device_id scx200_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS) }, { }, }; MODULE_DEVICE_TABLE(pci,scx200_tbl); static int __devinit scx200_probe(struct pci_dev *, const struct pci_device_id *); static struct pci_driver scx200_pci_driver = { .name = "scx200", .id_table = scx200_tbl, .probe = scx200_probe, }; static DEFINE_MUTEX(scx200_gpio_config_lock); static void __devinit scx200_init_shadow(void) { int bank; /* read the current values driven on the GPIO signals */ for (bank = 0; bank < 2; ++bank) scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank); } static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { unsigned base; if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE || pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) { base = pci_resource_start(pdev, 0); printk(KERN_INFO NAME ": GPIO base 0x%x\n", base); if (request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO") == 0) { printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n"); return -EBUSY; } scx200_gpio_base = base; scx200_init_shadow(); } else { /* find the base of the Configuration Block */ if (scx200_cb_probe(SCx200_CB_BASE_FIXED)) { scx200_cb_base = SCx200_CB_BASE_FIXED; } else { pci_read_config_dword(pdev, SCx200_CBA_SCRATCH, &base); if (scx200_cb_probe(base)) { scx200_cb_base = base; } else { printk(KERN_WARNING NAME ": Configuration Block not found\n"); return -ENODEV; } } printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base); } return 0; } u32 scx200_gpio_configure(unsigned index, u32 mask, u32 bits) { u32 config, new_config; mutex_lock(&scx200_gpio_config_lock); outl(index, scx200_gpio_base + 0x20); config = inl(scx200_gpio_base + 0x24); new_config = (config & mask) | bits; outl(new_config, scx200_gpio_base + 0x24); mutex_unlock(&scx200_gpio_config_lock); return config; } static int __init scx200_init(void) { printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n"); return pci_register_driver(&scx200_pci_driver); } static void __exit scx200_cleanup(void) { pci_unregister_driver(&scx200_pci_driver); release_region(scx200_gpio_base, SCx200_GPIO_SIZE); } module_init(scx200_init); module_exit(scx200_cleanup); EXPORT_SYMBOL(scx200_gpio_base); EXPORT_SYMBOL(scx200_gpio_shadow); EXPORT_SYMBOL(scx200_gpio_configure); EXPORT_SYMBOL(scx200_cb_base);