OpenCores
URL https://opencores.org/ocsvn/or1k_soc_on_altera_embedded_dev_kit/or1k_soc_on_altera_embedded_dev_kit/trunk

Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

[/] [or1k_soc_on_altera_embedded_dev_kit/] [trunk/] [linux-2.6/] [linux-2.6.24/] [arch/] [x86/] [mach-voyager/] [voyager_thread.c] - Rev 3

Compare with Previous | Blame | View Log

/* -*- mode: c; c-basic-offset: 8 -*- */
 
/* Copyright (C) 2001
 *
 * Author: J.E.J.Bottomley@HansenPartnership.com
 *
 * linux/arch/i386/kernel/voyager_thread.c
 *
 * This module provides the machine status monitor thread for the
 * voyager architecture.  This allows us to monitor the machine
 * environment (temp, voltage, fan function) and the front panel and
 * internal UPS.  If a fault is detected, this thread takes corrective
 * action (usually just informing init)
 * */
 
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/kernel_stat.h>
#include <linux/delay.h>
#include <linux/mc146818rtc.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/kmod.h>
#include <linux/completion.h>
#include <linux/sched.h>
#include <linux/kthread.h>
#include <asm/desc.h>
#include <asm/voyager.h>
#include <asm/vic.h>
#include <asm/mtrr.h>
#include <asm/msr.h>
 
 
struct task_struct *voyager_thread;
static __u8 set_timeout;
 
static int
execute(const char *string)
{
	int ret;
 
	char *envp[] = {
		"HOME=/",
		"TERM=linux",
		"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
		NULL,
	};
	char *argv[] = {
		"/bin/bash",
		"-c",
		(char *)string,
		NULL,
	};
 
	if ((ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC)) != 0) {
		printk(KERN_ERR "Voyager failed to run \"%s\": %i\n",
		       string, ret);
	}
	return ret;
}
 
static void
check_from_kernel(void)
{
	if(voyager_status.switch_off) {
 
		/* FIXME: This should be configurable via proc */
		execute("umask 600; echo 0 > /etc/initrunlvl; kill -HUP 1");
	} else if(voyager_status.power_fail) {
		VDEBUG(("Voyager daemon detected AC power failure\n"));
 
		/* FIXME: This should be configureable via proc */
		execute("umask 600; echo F > /etc/powerstatus; kill -PWR 1");
		set_timeout = 1;
	}
}
 
static void
check_continuing_condition(void)
{
	if(voyager_status.power_fail) {
		__u8 data;
		voyager_cat_psi(VOYAGER_PSI_SUBREAD, 
				VOYAGER_PSI_AC_FAIL_REG, &data);
		if((data & 0x1f) == 0) {
			/* all power restored */
			printk(KERN_NOTICE "VOYAGER AC power restored, cancelling shutdown\n");
			/* FIXME: should be user configureable */
			execute("umask 600; echo O > /etc/powerstatus; kill -PWR 1");
			set_timeout = 0;
		}
	}
}
 
static int
thread(void *unused)
{
	printk(KERN_NOTICE "Voyager starting monitor thread\n");
 
	for (;;) {
		set_current_state(TASK_INTERRUPTIBLE);
		schedule_timeout(set_timeout ? HZ : MAX_SCHEDULE_TIMEOUT);
 
		VDEBUG(("Voyager Daemon awoken\n"));
		if(voyager_status.request_from_kernel == 0) {
			/* probably awoken from timeout */
			check_continuing_condition();
		} else {
			check_from_kernel();
			voyager_status.request_from_kernel = 0;
		}
	}
}
 
static int __init
voyager_thread_start(void)
{
	voyager_thread = kthread_run(thread, NULL, "kvoyagerd");
	if (IS_ERR(voyager_thread)) {
		printk(KERN_ERR "Voyager: Failed to create system monitor thread.\n");
		return PTR_ERR(voyager_thread);
	}
	return 0;
}
 
 
static void __exit
voyager_thread_stop(void)
{
	kthread_stop(voyager_thread);
}
 
module_init(voyager_thread_start);
module_exit(voyager_thread_stop);
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.