Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

# ===========================================================================
# Kernel configuration targets
# These targets are used from top-level makefile

PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config

Kconfig := arch/$(SRCARCH)/Kconfig

xconfig: $(obj)/qconf
        $< $(Kconfig)

gconfig: $(obj)/gconf
        $< $(Kconfig)

menuconfig: $(obj)/mconf
        $< $(Kconfig)

config: $(obj)/conf
        $< $(Kconfig)

oldconfig: $(obj)/conf
        $< -o $(Kconfig)

silentoldconfig: $(obj)/conf
        $< -s $(Kconfig)

# Create new linux.po file
# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
# The symlink is used to repair a deficiency in arch/um
update-po-config: $(obj)/kxgettext
        xgettext --default-domain=linux                  \
            --add-comments --keyword=_ --keyword=N_      \
            --from-code=UTF-8                            \
            --files-from=scripts/kconfig/POTFILES.in     \
            --output $(obj)/config.pot
        $(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
        $(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch
        (for i in `ls arch/`;                            \
        do                                               \
            $(obj)/kxgettext arch/$$i/Kconfig;           \
        done ) >> $(obj)/config.pot
        msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
            --output $(obj)/linux.pot
        $(Q)rm -f arch/um/Kconfig.arch
        $(Q)rm -f $(obj)/config.pot

PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig

randconfig: $(obj)/conf
        $< -r $(Kconfig)

allyesconfig: $(obj)/conf
        $< -y $(Kconfig)

allnoconfig: $(obj)/conf
        $< -n $(Kconfig)

allmodconfig: $(obj)/conf
        $< -m $(Kconfig)

defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
        $< -d $(Kconfig)
else
        @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
        $(Q)$< -D arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
endif

%_defconfig: $(obj)/conf
        $(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig)

# Help text used by make help
help:
        @echo  '  config          - Update current config utilising a line-oriented program'
        @echo  '  menuconfig      - Update current config utilising a menu based program'
        @echo  '  xconfig         - Update current config utilising a QT based front-end'
        @echo  '  gconfig         - Update current config utilising a GTK based front-end'
        @echo  '  oldconfig       - Update current config utilising a provided .config as base'
        @echo  '  silentoldconfig - Same as oldconfig, but quietly'
        @echo  '  randconfig      - New config with random answer to all options'
        @echo  '  defconfig       - New config with default answer to all options'
        @echo  '  allmodconfig    - New config selecting modules when possible'
        @echo  '  allyesconfig    - New config where all options are accepted with yes'
        @echo  '  allnoconfig     - New config where all options are answered with no'

# lxdialog stuff
check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh

# Use recursively expanded variables so we do not call gcc unless
# we really need to do so. (Do not call gcc as part of make mrproper)
HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))

HOST_EXTRACFLAGS += -DLOCALE

PHONY += $(obj)/dochecklxdialog
$(obj)/dochecklxdialog:
        $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_LOADLIBES)

always := dochecklxdialog


# ===========================================================================
# Shared Makefile for the various kconfig executables:
# conf:   Used for defconfig, oldconfig and related targets
# mconf:  Used for the mconfig target.
#         Utilizes the lxdialog package
# qconf:  Used for the xconfig target
#         Based on QT which needs to be installed to compile it
# gconf:  Used for the gconfig target
#         Based on GTK which needs to be installed to compile it
# object files used by all kconfig flavours

lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o

conf-objs       := conf.o  zconf.tab.o
mconf-objs      := mconf.o zconf.tab.o $(lxdialog)
kxgettext-objs  := kxgettext.o zconf.tab.o

hostprogs-y := conf qconf gconf kxgettext

ifeq ($(MAKECMDGOALS),menuconfig)
        hostprogs-y += mconf
endif

ifeq ($(MAKECMDGOALS),xconfig)
        qconf-target := 1
endif
ifeq ($(MAKECMDGOALS),gconfig)
        gconf-target := 1
endif


ifeq ($(qconf-target),1)
qconf-cxxobjs   := qconf.o
qconf-objs      := kconfig_load.o zconf.tab.o
endif

ifeq ($(gconf-target),1)
gconf-objs      := gconf.o kconfig_load.o zconf.tab.o
endif

clean-files     := lkc_defs.h qconf.moc .tmp_qtcheck \
                   .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c
clean-files     += mconf qconf gconf

# Add environment specific flags
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))

# generated files seem to need this to find local include files
HOSTCFLAGS_lex.zconf.o  := -I$(src)
HOSTCFLAGS_zconf.tab.o  := -I$(src)

HOSTLOADLIBES_qconf     = $(KC_QT_LIBS) -ldl
HOSTCXXFLAGS_qconf.o    = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK

HOSTLOADLIBES_gconf     = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
HOSTCFLAGS_gconf.o      = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
                          -D LKC_DIRECT_LINK

$(obj)/qconf.o: $(obj)/.tmp_qtcheck

ifeq ($(qconf-target),1)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck

# QT needs some extra effort...
$(obj)/.tmp_qtcheck:
        @set -e; echo "  CHECK   qt"; dir=""; pkg=""; \
        pkg-config --exists qt 2> /dev/null && pkg=qt; \
        pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
        if [ -n "$$pkg" ]; then \
          cflags="\$$(shell pkg-config $$pkg --cflags)"; \
          libs="\$$(shell pkg-config $$pkg --libs)"; \
          moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
          dir="$$(pkg-config $$pkg --variable=prefix)"; \
        else \
          for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
            if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
          done; \
          if [ -z "$$dir" ]; then \
            echo "*"; \
            echo "* Unable to find the QT3 installation. Please make sure that"; \
            echo "* the QT3 development package is correctly installed and"; \
            echo "* either install pkg-config or set the QTDIR environment"; \
            echo "* variable to the correct location."; \
            echo "*"; \
            false; \
          fi; \
          libpath=$$dir/lib; lib=qt; osdir=""; \
          $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
            osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
          test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
          test -f $$libpath/libqt-mt.so && lib=qt-mt; \
          cflags="-I$$dir/include"; \
          libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
          moc="$$dir/bin/moc"; \
        fi; \
        if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
          echo "*"; \
          echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
          echo "*"; \
          moc="/usr/bin/moc"; \
        fi; \
        echo "KC_QT_CFLAGS=$$cflags" > $@; \
        echo "KC_QT_LIBS=$$libs" >> $@; \
        echo "KC_QT_MOC=$$moc" >> $@
endif

$(obj)/gconf.o: $(obj)/.tmp_gtkcheck

ifeq ($(gconf-target),1)
-include $(obj)/.tmp_gtkcheck

# GTK needs some extra effort, too...
$(obj)/.tmp_gtkcheck:
        @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then               \
                if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then                  \
                        touch $@;                                                               \
                else                                                                    \
                        echo "*";                                                       \
                        echo "* GTK+ is present but version >= 2.0.0 is required.";     \
                        echo "*";                                                       \
                        false;                                                          \
                fi                                                                      \
        else                                                                            \
                echo "*";                                                               \
                echo "* Unable to find the GTK+ installation. Please make sure that";   \
                echo "* the GTK+ 2.0 development package is correctly installed...";    \
                echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0.";                 \
                echo "*";                                                               \
                false;                                                                  \
        fi
endif

$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c

$(obj)/kconfig_load.o: $(obj)/lkc_defs.h

$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h

$(obj)/gconf.o: $(obj)/lkc_defs.h

$(obj)/%.moc: $(src)/%.h
        $(KC_QT_MOC) -i $< -o $@

$(obj)/lkc_defs.h: $(src)/lkc_proto.h
        sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'


###
# The following requires flex/bison/gperf
# By default we use the _shipped versions, uncomment the following line if
# you are modifying the flex/bison src.
# LKC_GENPARSER := 1

ifdef LKC_GENPARSER

$(obj)/zconf.tab.c: $(src)/zconf.y
$(obj)/lex.zconf.c: $(src)/zconf.l
$(obj)/zconf.hash.c: $(src)/zconf.gperf

%.tab.c: %.y
        bison -l -b $* -p $(notdir $*) $<
        cp $@ $@_shipped

lex.%.c: %.l
        flex -L -P$(notdir $*) -o$@ $<
        cp $@ $@_shipped

%.hash.c: %.gperf
        gperf < $< > $@
        cp $@ $@_shipped

endif