Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

#
# rt-mutex test
#
# Op: C(ommand)/T(est)/W(ait)
# |  opcode
# |  |     threadid: 0-7
# |  |     |  opcode argument
# |  |     |  |
# C: lock: 0: 0
#
# Commands
#
# opcode        opcode argument
# schedother    nice value
# schedfifo     priority
# lock          lock nr (0-7)
# locknowait    lock nr (0-7)
# lockint       lock nr (0-7)
# lockintnowait lock nr (0-7)
# lockcont      lock nr (0-7)
# unlock        lock nr (0-7)
# lockbkl       lock nr (0-7)
# unlockbkl     lock nr (0-7)
# signal        thread to signal (0-7)
# reset         0
# resetevent    0
#
# Tests / Wait
#
# opcode        opcode argument
#
# prioeq        priority
# priolt        priority
# priogt        priority
# nprioeq       normal priority
# npriolt       normal priority
# npriogt       normal priority
# locked        lock nr (0-7)
# blocked       lock nr (0-7)
# blockedwake   lock nr (0-7)
# unlocked      lock nr (0-7)
# lockedbkl     dont care
# blockedbkl    dont care
# unlockedbkl   dont care
# opcodeeq      command opcode or number
# opcodelt      number
# opcodegt      number
# eventeq       number
# eventgt       number
# eventlt       number

#
# 3 threads 1 lock PI steal pending ownership
#
C: resetevent:          0:      0
W: opcodeeq:            0:      0

# Set schedulers
C: schedother:          0:      0
C: schedfifo:           1:      80
C: schedfifo:           2:      81

# T0 lock L0
C: lock:                0:      0
W: locked:              0:      0

# T1 lock L0
C: lock:                1:      0
W: blocked:             1:      0
T: prioeq:              0:      80

# T0 unlock L0
C: unlock:              0:      0

# Wait until T1 is in the wakeup loop
W: blockedwake:         1:      0
T: priolt:              0:      1

# T2 lock L0
C: lock:                2:      0
# T1 leave wakeup loop
C: lockcont:            1:      0

# T2 must have the lock and T1 must be blocked
W: locked:              2:      0
W: blocked:             1:      0

# T2 unlock L0
C: unlock:              2:      0

# Wait until T1 is in the wakeup loop and let it run
W: blockedwake:         1:      0
C: lockcont:            1:      0
W: locked:              1:      0
C: unlock:              1:      0
W: unlocked:            1:      0