Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

/////////////////////////////////////////////////////////////////////
////                                                             ////
////  WISHBONE Memory Controller Chip Select Register File       ////
////                                                             ////
////                                                             ////
////  Author: Rudolf Usselmann                                   ////
////          rudi@asics.ws                                      ////
////                                                             ////
////                                                             ////
////  Downloaded from: http://www.opencores.org/cores/mem_ctrl/  ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
////                                                             ////
//// Copyright (C) 2000-2002 Rudolf Usselmann                    ////
////                         www.asics.ws                        ////
////                         rudi@asics.ws                       ////
////                                                             ////
//// This source file may be used and distributed without        ////
//// restriction provided that this copyright statement is not   ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
////                                                             ////
////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////
//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////
//// POSSIBILITY OF SUCH DAMAGE.                                 ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
 
//  CVS Log
//
//  $Id: mc_cs_rf.v,v 1.6 2002-01-21 13:08:52 rudi Exp $
//
//  $Date: 2002-01-21 13:08:52 $
//  $Revision: 1.6 $
//  $Author: rudi $
//  $Locker:  $
//  $State: Exp $
//
// Change History:
//               $Log: not supported by cvs2svn $
//               Revision 1.5  2001/12/11 02:47:19  rudi
//
//               - Made some changes not to expect clock during reset ...
//
//               Revision 1.4  2001/11/29 02:16:28  rudi
//
//
//               - More Synthesis cleanup, mostly for speed
//               - Several bug fixes
//               - Changed code to avoid auto-precharge and
//                 burst-terminate combinations (apparently illegal ?)
//                 Now we will do a manual precharge ...
//
//               Revision 1.3  2001/09/24 00:38:21  rudi
//
//               Changed Reset to be active high and async.
//
//               Revision 1.2  2001/08/10 08:16:21  rudi
//
//               - Changed IO names to be more clear.
//               - Uniquifyed define names to be core specific.
//               - Removed "Refresh Early" configuration
//
//               Revision 1.1  2001/07/29 07:34:41  rudi
//
//
//               1) Changed Directory Structure
//               2) Fixed several minor bugs
//
//               Revision 1.3  2001/06/12 15:19:49  rudi
//
//
//               Minor changes after running lint, and a small bug fix reading csr and ba_mask registers.
//
//               Revision 1.2  2001/06/03 11:37:17  rudi
//
//
//               1) Fixed Chip Select Mask Register
//               	- Power On Value is now all ones
//               	- Comparison Logic is now correct
//
//               2) All resets are now asynchronous
//
//               3) Converted Power On Delay to an configurable item
//
//               4) Added reset to Chip Select Output Registers
//
//               5) Forcing all outputs to Hi-Z state during reset
//
//               Revision 1.1.1.1  2001/05/13 09:39:42  rudi
//               Created Directory Structure
//
//
//
//
 
`include "mc_defines.v"
 
module mc_cs_rf(clk, rst, wb_we_i, din, rf_we, addr, csc, tms, poc, csc_mask, cs,
		wp_err, lmr_req, lmr_ack, init_req, init_ack );
 
input		clk, rst;
input		wb_we_i;
input	[31:0]	din;
input		rf_we;
input	[31:0]	addr;
 
output	[31:0]	csc;
output	[31:0]	tms;
input	[31:0]	poc;
input	[31:0]	csc_mask;
output		cs;
output		wp_err;
 
output		lmr_req;
input		lmr_ack;
output		init_req;
input		init_ack;
 
parameter	[2:0]	this_cs = 0;
parameter	[3:0]	reg_select = this_cs + 2;
 
////////////////////////////////////////////////////////////////////
//
// Local Registers and Wires
//
 
reg	[31:0]	csc;
reg	[31:0]	tms;
wire		sel;
wire		cs_d;
wire		wp;
reg		inited;
reg		init_req;
reg		init_req_we;
reg		lmr_req;
reg		lmr_req_we;
 
////////////////////////////////////////////////////////////////////
//
// A kludge for cases where there is no clock during reset ...
//
 
reg	rst_r1, rst_r2;
 
always @(posedge clk or posedge rst)
	if(rst)		rst_r1 <= #1 1'b1;
	else		rst_r1 <= #1 1'b0;
 
always @(posedge clk or posedge rst)
	if(rst)		rst_r2 <= #1 1'b1;
	else		rst_r2 <= #1 rst_r1;
 
////////////////////////////////////////////////////////////////////
//
// Write Logic
//
 
reg	[6:0]	addr_r;
 
always @(posedge clk)
	addr_r <= #1 addr[6:0];
 
assign sel = addr_r[6:3] == reg_select[3:0];
 
always @(posedge clk)
	if(rst_r2)			csc <= #1 (this_cs[2:0] == `MC_DEF_SEL) ? 
					{26'h0, poc[1:0], 1'b0, poc[3:2], (poc[3:2] != 2'b00)} : 32'h0;
	else
	if(rf_we & sel & !addr_r[2])	csc <= #1 din;
 
always @(posedge clk)
	if(rst_r2)			tms <= #1 (this_cs[2:0] == `MC_DEF_SEL) ?
						`MC_DEF_POR_TMS : 32'h0;
	else
	if(rf_we & sel & addr_r[2])	tms <= #1 din;
 
////////////////////////////////////////////////////////////////////
//
// Load Mode Register Request/Ack Logic
//
always @(posedge clk or posedge rst)
	if(rst)		lmr_req_we <= #1 1'b0;
	else		lmr_req_we <= #1 rf_we & sel & addr_r[2];
 
always @(posedge clk or posedge rst)
	if(rst)		lmr_req <= #1 1'b0;
	else
	if(lmr_req_we & (csc[3:1] == `MC_MEM_TYPE_SDRAM))
			lmr_req <= #1 inited;
	else
	if(lmr_ack)	lmr_req <= #1 1'b0;
 
////////////////////////////////////////////////////////////////////
//
// Initialize SDRAM Request/Ack & tracking logic
//
always @(posedge clk or posedge rst)
	if(rst)	init_req_we <= #1 1'b0;
	else	init_req_we <= #1 rf_we & sel & !addr_r[2];
 
always @(posedge clk or posedge rst)
	if(rst)		init_req <= #1 1'b0;
	else
	if(init_req_we & (csc[3:1] == `MC_MEM_TYPE_SDRAM) & csc[0] & !inited)
			init_req <= #1 1'b1;
	else
	if(init_ack)	init_req <= #1 1'b0;
 
always @(posedge clk or posedge rst)
	if(rst)		inited <= #1 1'b0;
	else
	if(init_ack)	inited <= #1 1'b1;
 
////////////////////////////////////////////////////////////////////
//
// Chip Select Generation Logic
//
 
assign cs_d = ((csc[23:16] & csc_mask[7:0]) == (addr[28:21] & csc_mask[7:0])) & csc[0];
 
assign wp = wb_we_i & csc[8];
 
assign wp_err = cs_d &  wp;
assign cs     = cs_d & !wp;
 
endmodule
 
 
 
// This dummy is used to terminate the outputs for non existing Chip Selects
module mc_cs_rf_dummy(clk, rst, wb_we_i, din, rf_we, addr, csc, tms, poc, csc_mask, cs,
		wp_err, lmr_req, lmr_ack, init_req, init_ack );
 
parameter	[2:0]	this_cs = 0;
 
input		clk, rst;
input		wb_we_i;
input	[31:0]	din;
input		rf_we;
input	[31:0]	addr;
 
output	[31:0]	csc;
output	[31:0]	tms;
input	[31:0]	poc;
input	[31:0]	csc_mask;
output		cs;
output		wp_err;
 
output		lmr_req;
input		lmr_ack;
output		init_req;
input		init_ack;
 
assign csc = 32'h0;
assign tms = 32'h0;
assign cs = 1'b0;
assign wp_err = 1'b0;
assign lmr_req = 1'b0;
assign init_req = 1'b0;
 
endmodule