URL
https://opencores.org/ocsvn/pci/pci/trunk
Subversion Repositories pci
[/] [pci/] [tags/] [rel_11/] [bench/] [verilog/] [pci_regression_constants.v] - Rev 15
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// File name "pci_regression_constants.v" //// //// //// //// This file is part of the "PCI bridge" project //// //// http://www.opencores.org/cores/pci/ //// //// //// //// Author(s): //// //// - Miha Dolenc (mihad@opencores.org) //// //// - Tadej Markovic (tadej@opencores.org) //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Miha Dolenc, mihad@opencores.org //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // /////////////////////////////////////////////////////////////////////////////// //// ===================================================================== //// //// Following PCI_USER_CONSTANTS are just for regression testing purposes //// //// (script for running regression is prepared for NC-Sim) //// //// //// //// For description of defines see pci_user_constants.v file ! //// //// ===================================================================== //// /////////////////////////////////////////////////////////////////////////////// // Fifo implementation defines: // If FPGA and XILINX are defined, Xilinx's BlockSelectRAM+ is instantiated for Fifo storage. // 16 bit width is used, so 8 bits of address ( 256 ) locations are available. If RAM_DONT_SHARE is not defined (commented out), // then one block RAM is shared between two FIFOs. That means each Fifo can have a maximum address length of 7 - depth of 128 and only 6 block rams are used // If RAM_DONT_SHARE is defined ( not commented out ), then 12 block RAMs are used and each Fifo can have a maximum address length of 8 ( 256 locations ) // If FPGA is not defined, then ASIC RAMs are used. Currently there is only one version of ARTISAN RAM supported. User should generate synchronous RAM with // width of 40 and instantiate it in pci_tpram.v. If RAM_DONT_SHARE is defined, then these can be dual port rams ( write port // in one clock domain, read in other ), otherwise it must be two port RAM ( read and write ports in both clock domains ). // If RAM_DONT_SHARE is defined, then all RAM address lengths must be specified accordingly, otherwise there are two relevant lengths - PCI_FIFO_RAM_ADDR_LENGTH and // WB_FIFO_RAM_ADDR_LENGTH. `ifdef REGR_FIFO_SMALL_XILINX // with Xilinx FPGA parameters only `define WBW_ADDR_LENGTH 3 `define WBR_ADDR_LENGTH 4 `define PCIW_ADDR_LENGTH 4 `define PCIR_ADDR_LENGTH 3 `define FPGA `define XILINX `define WB_RAM_DONT_SHARE //`define PCI_RAM_DONT_SHARE `ifdef FPGA `ifdef XILINX `define PCI_FIFO_RAM_ADDR_LENGTH 8 // PCI target unit fifo storage definition `define WB_FIFO_RAM_ADDR_LENGTH 4 // WB slave unit fifo storage definition `define PCI_XILINX_RAMB4 //`define WB_XILINX_RAMB4 //`define PCI_XILINX_DIST_RAM `define WB_XILINX_DIST_RAM `endif `else `define PCI_FIFO_RAM_ADDR_LENGTH 8 // PCI target unit fifo storage definition when RAM sharing is used ( both pcir and pciw fifo use same instance of RAM ) `define WB_FIFO_RAM_ADDR_LENGTH 8 // WB slave unit fifo storage definition when RAM sharing is used ( both wbr and wbw fifo use same instance of RAM ) `define WB_ARTISAN_SDP `define PCI_ARTISAN_SDP `endif `else `ifdef REGR_FIFO_MEDIUM_ARTISAN // with Artisan parameter only `define WBW_ADDR_LENGTH 7 `define WBR_ADDR_LENGTH 6 `define PCIW_ADDR_LENGTH 7 `define PCIR_ADDR_LENGTH 8 //`define FPGA //`define XILINX //`define WB_RAM_DONT_SHARE `define PCI_RAM_DONT_SHARE `ifdef FPGA `ifdef XILINX `define PCI_FIFO_RAM_ADDR_LENGTH 8 // PCI target unit fifo storage definition `define WB_FIFO_RAM_ADDR_LENGTH 8 // WB slave unit fifo storage definition `define PCI_XILINX_RAMB4 `define WB_XILINX_RAMB4 //`define PCI_XILINX_DIST_RAM //`define WB_XILINX_DIST_RAM `endif `else `define PCI_FIFO_RAM_ADDR_LENGTH 8 // PCI target unit fifo storage definition when RAM sharing is used ( both pcir and pciw fifo use same instance of RAM ) `define WB_FIFO_RAM_ADDR_LENGTH 8 // WB slave unit fifo storage definition when RAM sharing is used ( both wbr and wbw fifo use same instance of RAM ) `define WB_ARTISAN_SDP `define PCI_ARTISAN_SDP `endif `else `ifdef REGR_FIFO_SMALL_GENERIC // without any parameters only (generic) `define WBW_ADDR_LENGTH 3 `define WBR_ADDR_LENGTH 4 `define PCIW_ADDR_LENGTH 4 `define PCIR_ADDR_LENGTH 3 //`define FPGA //`define XILINX `define WB_RAM_DONT_SHARE //`define PCI_RAM_DONT_SHARE `ifdef FPGA `ifdef XILINX `define PCI_FIFO_RAM_ADDR_LENGTH 8 // PCI target unit fifo storage definition `define WB_FIFO_RAM_ADDR_LENGTH 8 // WB slave unit fifo storage definition `define PCI_XILINX_RAMB4 `define WB_XILINX_RAMB4 //`define PCI_XILINX_DIST_RAM //`define WB_XILINX_DIST_RAM `endif `else `define PCI_FIFO_RAM_ADDR_LENGTH 5 // PCI target unit fifo storage definition when RAM sharing is used ( both pcir and pciw fifo use same instance of RAM ) `define WB_FIFO_RAM_ADDR_LENGTH 4 // WB slave unit fifo storage definition when RAM sharing is used ( both wbr and wbw fifo use same instance of RAM ) //`define WB_ARTISAN_SDP //`define PCI_ARTISAN_SDP `endif `else `ifdef REGR_FIFO_MEDIUM_GENERIC // without any parameters only (generic) `define WBW_ADDR_LENGTH 7 `define WBR_ADDR_LENGTH 6 `define PCIW_ADDR_LENGTH 7 `define PCIR_ADDR_LENGTH 8 //`define FPGA //`define XILINX //`define WB_RAM_DONT_SHARE `define PCI_RAM_DONT_SHARE `ifdef FPGA `ifdef XILINX `define PCI_FIFO_RAM_ADDR_LENGTH 8 // PCI target unit fifo storage definition `define WB_FIFO_RAM_ADDR_LENGTH 8 // WB slave unit fifo storage definition `define PCI_XILINX_RAMB4 `define WB_XILINX_RAMB4 //`define PCI_XILINX_DIST_RAM //`define WB_XILINX_DIST_RAM `endif `else `define PCI_FIFO_RAM_ADDR_LENGTH 8 // PCI target unit fifo storage definition when RAM sharing is used ( both pcir and pciw fifo use same instance of RAM ) `define WB_FIFO_RAM_ADDR_LENGTH 8 // WB slave unit fifo storage definition when RAM sharing is used ( both wbr and wbw fifo use same instance of RAM ) //`define WB_ARTISAN_SDP //`define PCI_ARTISAN_SDP `endif `else `ifdef REGR_FIFO_LARGE_GENERIC // without any parameters only (generic) `define WBW_ADDR_LENGTH 10 `define WBR_ADDR_LENGTH 10 `define PCIW_ADDR_LENGTH 10 `define PCIR_ADDR_LENGTH 10 //`define FPGA //`define XILINX //`define WB_RAM_DONT_SHARE //`define PCI_RAM_DONT_SHARE `ifdef FPGA `ifdef XILINX `define PCI_FIFO_RAM_ADDR_LENGTH 8 // PCI target unit fifo storage definition `define WB_FIFO_RAM_ADDR_LENGTH 8 // WB slave unit fifo storage definition `define PCI_XILINX_RAMB4 `define WB_XILINX_RAMB4 //`define PCI_XILINX_DIST_RAM //`define WB_XILINX_DIST_RAM `endif `else `define PCI_FIFO_RAM_ADDR_LENGTH 11 // PCI target unit fifo storage definition when RAM sharing is used ( both pcir and pciw fifo use same instance of RAM ) `define WB_FIFO_RAM_ADDR_LENGTH 11 // WB slave unit fifo storage definition when RAM sharing is used ( both wbr and wbw fifo use same instance of RAM ) //`define WB_ARTISAN_SDP //`define PCI_ARTISAN_SDP `endif `else `endif `endif `endif `endif `endif // number defined here specifies how many MS bits in PCI address are compared with base address, to decode // accesses. Maximum number allows for minimum image size ( number = 20, image size = 4KB ), minimum number // allows for maximum image size ( number = 1, image size = 2GB ). If you intend on using different sizes of PCI images, // you have to define a number of minimum sized image and enlarge others by specifying different address mask. // smaller the number here, faster the decoder operation `ifdef PCI_DECODE_MIN `define PCI_NUM_OF_DEC_ADDR_LINES 3 `else `ifdef PCI_DECODE_MED `define PCI_NUM_OF_DEC_ADDR_LINES 12 `else `ifdef PCI_DECODE_MAX `define PCI_NUM_OF_DEC_ADDR_LINES 20 `endif `endif `endif // initial value for PCI image address masks. Address masks can be defined in enabled state, // to allow device independent software to detect size of image and map base addresses to // memory space. If initial mask for an image is defined as 0, then device independent software // won't detect base address implemented and device dependent software will have to configure // address masks as well as base addresses! `define PCI_AM0 20'hffff_f `define PCI_AM1 20'hffff_f `define PCI_AM2 20'hffff_f `define PCI_AM3 20'hffff_f `define PCI_AM4 20'hffff_f `define PCI_AM5 20'hffff_f // initial value for PCI image maping to MEMORY or IO spaces. If initial define is set to 0, // then IMAGE with that base address points to MEMORY space, othervise it points ti IO space. D // Device independent software sets the base addresses acording to MEMORY or IO maping! `define PCI_BA0_MEM_IO 1'b0 // considered only when PCI_IMAGE0 is used as general PCI-WB image! `define PCI_BA1_MEM_IO 1'b0 `define PCI_BA2_MEM_IO 1'b0 `define PCI_BA3_MEM_IO 1'b0 `define PCI_BA4_MEM_IO 1'b1 `define PCI_BA5_MEM_IO 1'b1 // number defined here specifies how many MS bits in WB address are compared with base address, to decode // accesses. Maximum number allows for minimum image size ( number = 20, image size = 4KB ), minimum number // allows for maximum image size ( number = 1, image size = 2GB ). If you intend on using different sizes of WB images, // you have to define a number of minimum sized image and enlarge others by specifying different address mask. // smaller the number here, faster the decoder operation `ifdef WB_DECODE_MIN `define WB_NUM_OF_DEC_ADDR_LINES 3 `else `ifdef WB_DECODE_MED `define WB_NUM_OF_DEC_ADDR_LINES 12 `else `ifdef WB_DECODE_MAX `define WB_NUM_OF_DEC_ADDR_LINES 20 `endif `endif `endif // Base address for Configuration space access from WB bus. This value cannot be changed during runtime `ifdef WB_CNF_BASE_ZERO `define WB_CONFIGURATION_BASE 20'h0000_0 `else `define WB_CONFIGURATION_BASE 20'hF000_0 `endif /*----------------------------------------------------------------------------------------------------------- [000h-00Ch] First 4 DWORDs (32-bit) of PCI configuration header - the same regardless of the HEADER type ! Vendor_ID is an ID for a specific vendor defined by PCI_SIG - 2321h does not belong to anyone (e.g. Xilinx's Vendor_ID is 10EEh and Altera's Vendor_ID is 1172h). Device_ID and Revision_ID should be used together by application. -----------------------------------------------------------------------------------------------------------*/ `define HEADER_VENDOR_ID 16'h2321 `define HEADER_DEVICE_ID 16'h0001 `define HEADER_REVISION_ID 8'h01 // MAX Retry counter value for WISHBONE Master state-machine // This value is 8-bit because of 8-bit retry counter !!! `ifdef WB_RETRY_MAX `define WB_RTY_CNT_MAX 8'hff `else `define WB_RTY_CNT_MAX 8'h1c `endif ///////////////////////////////////////////////////////////////////////////////// //// ======================================================================= //// //// Following PCI_TESTBENC_DEFINES are just for regression testing purposes //// //// (script for running regression is prepared for NC-Sim) //// //// //// //// For description of defines see pci_testbench_defines.v file ! //// //// ======================================================================= //// ///////////////////////////////////////////////////////////////////////////////// // wishbone frequncy in GHz `ifdef WB_CLK10 `define WB_FREQ 0.01 `else `ifdef WB_CLK66 `define WB_FREQ 0.066 `else `ifdef WB_CLK100 `define WB_FREQ 0.1 `endif `endif `endif // values of image registers of PCI bridge device - valid are only upper 20 bits, others must be ZERO ! `define TAR0_BASE_ADDR_0 32'h1000_0000 `define TAR0_BASE_ADDR_1 32'h2000_0000 `define TAR0_BASE_ADDR_2 32'h3000_0000 `define TAR0_BASE_ADDR_3 32'h4000_0000 `define TAR0_BASE_ADDR_4 32'h5000_0000 `define TAR0_BASE_ADDR_5 32'h6000_0000 `define TAR0_ADDR_MASK_0 32'hFFFF_F000 // when BA0 is used to access configuration space, this is NOT important! `define TAR0_ADDR_MASK_1 32'hFFFF_F000 `define TAR0_ADDR_MASK_2 32'hFFFF_F000 `define TAR0_ADDR_MASK_3 32'hFFFF_F000 `define TAR0_ADDR_MASK_4 32'hFFFF_F000 `define TAR0_ADDR_MASK_5 32'hFFFF_F000 `define TAR0_TRAN_ADDR_0 32'h5000_0000 // when BA0 is used to access configuration space, this is NOT important! `define TAR0_TRAN_ADDR_1 32'h4000_0000 `define TAR0_TRAN_ADDR_2 32'h3000_0000 `define TAR0_TRAN_ADDR_3 32'h2000_0000 `define TAR0_TRAN_ADDR_4 32'h1000_0000 `define TAR0_TRAN_ADDR_5 32'h0000_0000 // values of image registers of PCI behavioral target devices ! `define BEH_TAR1_MEM_START 32'h7000_0000 `define BEH_TAR1_MEM_END 32'h7000_0FFF `define BEH_TAR1_IO_START 32'h8000_0001 `define BEH_TAR1_IO_END 32'h8000_0FFF `define BEH_TAR2_MEM_START 32'h9000_0000 `define BEH_TAR2_MEM_END 32'h9000_0FFF `define BEH_TAR2_IO_START 32'hA000_0001 `define BEH_TAR2_IO_END 32'hA000_0FFF /*======================================================================================= Following defines are used in a script file for regression testing !!! ========================================================================================= REGRESSION HOST GUEST REGR_FIFO_SMALL_XILINX REGR_FIFO_MEDIUM_ARTISAN REGR_FIFO_LARGE_GENERIC (REGR_FIFO_SMALL_GENERIC) (REGR_FIFO_MEDIUM_GENERIC) ADDR_TRAN_IMPL WB_RETRY_MAX WB_CNF_BASE_ZERO NO_CNF_IMAGE PCI_IMAGE0 // `ifdef HOST `ifdef NO_CNF_IMAGE `define PCI_IMAGE0 PCI_IMAGE2 PCI_IMAGE3 PCI_IMAGE4 PCI_IMAGE5 WB_IMAGE2 WB_IMAGE3 WB_IMAGE4 WB_IMAGE5 WB_DECODE_FAST WB_DECODE_MEDIUM WB_DECODE_SLOW REGISTER_WBM_OUTPUTS REGISTER_WBS_OUTPUTS PCI_DECODE_MIN PCI_DECODE_MED PCI_DECODE_MAX WB_DECODE_MIN WB_DECODE_MED WB_DECODE_MAX PCI33 PCI66 WB_CLK10 WB_CLK66 WB_CLK100 ACTIVE_LOW_OE ACTIVE_HIGH_OE ----------------------------------------------------------------------------------------- Follows combinations of defines used in a script file for regression testing !!! ----------------------------------------------------------------------------------------- "REGRESSION+HOST+REGR_FIFO_SMALL_XILINX+WB_DECODE_FAST+PCI_DECODE_MAX+WB_DECODE_MIN+PCI33+WB_CLK10+ACTIVE_LOW_OE+REGISTER_WBM_OUTPUTS+REGISTER_WBS_OUTPUTS+ADDR_TRAN_IMPL+WB_RETRY_MAX+PCI_IMAGE0+PCI_IMAGE2" "REGRESSION+HOST+REGR_FIFO_MEDIUM_ARTISAN+WB_DECODE_MEDIUM+PCI_DECODE_MED+WB_DECODE_MED+PCI33+WB_CLK66+ACTIVE_LOW_OE+REGISTER_WBM_OUTPUTS+REGISTER_WBS_OUTPUTS+ADDR_TRAN_IMPL+WB_RETRY_MAX+PCI_IMAGE0+PCI_IMAGE2+PCI_IMAGE3+PCI_IMAGE4+PCI_IMAGE5+WB_IMAGE2+WB_IMAGE5" "REGRESSION+HOST+REGR_FIFO_LARGE_GENERIC+WB_DECODE_SLOW+PCI_DECODE_MIN+WB_DECODE_MAX+PCI66+WB_CLK66+ACTIVE_LOW_OE+REGISTER_WBM_OUTPUTS+REGISTER_WBS_OUTPUTS+WB_IMAGE5" "REGRESSION+GUEST+REGR_FIFO_SMALL_XILINX+WB_DECODE_SLOW+PCI_DECODE_MED+WB_DECODE_MIN+PCI66+WB_CLK100+ACTIVE_LOW_OE+REGISTER_WBM_OUTPUTS+REGISTER_WBS_OUTPUTS+WB_RETRY_MAX+PCI_IMAGE0+PCI_IMAGE5+WB_IMAGE4" "REGRESSION+GUEST+REGR_FIFO_MEDIUM_ARTISAN+WB_DECODE_FAST+PCI_DECODE_MIN+WB_DECODE_MAX+PCI33+WB_CLK100+ACTIVE_LOW_OE+REGISTER_WBM_OUTPUTS+REGISTER_WBS_OUTPUTS+ADDR_TRAN_IMPL+PCI_IMAGE0+WB_IMAGE2+WB_IMAGE3+WB_IMAGE4" "REGRESSION+GUEST+REGR_FIFO_LARGE_GENERIC+WB_DECODE_MEDIUM+PCI_DECODE_MAX+WB_DECODE_MED+PCI66+WB_CLK10+ACTIVE_LOW_OE+REGISTER_WBM_OUTPUTS+REGISTER_WBS_OUTPUTS+ADDR_TRAN_IMPL" "REGRESSION+HOST+REGR_FIFO_SMALL_XILINX+WB_DECODE_FAST+PCI_DECODE_MAX+WB_DECODE_MIN+PCI66+WB_CLK100+ACTIVE_HIGH_OE+WB_CNF_BASE_ZERO+NO_CNF_IMAGE+PCI_IMAGE0+PCI_IMAGE4" "REGRESSION+HOST+REGR_FIFO_MEDIUM_ARTISAN+WB_DECODE_MEDIUM+PCI_DECODE_MED+WB_DECODE_MED+PCI66+WB_CLK10+ACTIVE_HIGH_OE+WB_CNF_BASE_ZERO+NO_CNF_IMAGE+PCI_IMAGE0+PCI_IMAGE2+PCI_IMAGE3+PCI_IMAGE4+PCI_IMAGE5+WB_IMAGE2+WB_IMAGE3+WB_IMAGE4+WB_IMAGE5" "REGRESSION+HOST+REGR_FIFO_LARGE_GENERIC+WB_DECODE_SLOW+PCI_DECODE_MIN+WB_DECODE_MAX+PCI33+WB_CLK100+ACTIVE_HIGH_OE+ADDR_TRAN_IMPL+WB_RETRY_MAX+WB_CNF_BASE_ZERO+NO_CNF_IMAGE+WB_IMAGE3" "REGRESSION+GUEST+REGR_FIFO_SMALL_XILINX+WB_DECODE_SLOW+PCI_DECODE_MED+WB_DECODE_MIN+PCI33+WB_CLK66+ACTIVE_HIGH_OE+ADDR_TRAN_IMPL+WB_CNF_BASE_ZERO+NO_CNF_IMAGE+PCI_IMAGE0+PCI_IMAGE3" "REGRESSION+GUEST+REGR_FIFO_MEDIUM_ARTISAN+WB_DECODE_FAST+PCI_DECODE_MIN+WB_DECODE_MAX+PCI66+WB_CLK66+ACTIVE_HIGH_OE+WB_RETRY_MAX+WB_CNF_BASE_ZERO+NO_CNF_IMAGE+PCI_IMAGE0+PCI_IMAGE2+PCI_IMAGE3+PCI_IMAGE4+PCI_IMAGE5+WB_IMAGE2" "REGRESSION+GUEST+REGR_FIFO_LARGE_GENERIC+WB_DECODE_MEDIUM+PCI_DECODE_MAX+WB_DECODE_MED+PCI33+WB_CLK10+ACTIVE_HIGH_OE+WB_RETRY_MAX+WB_CNF_BASE_ZERO+NO_CNF_IMAGE+WB_IMAGE2+WB_IMAGE3+WB_IMAGE4+WB_IMAGE5" "" ========================================================================================= */
Go to most recent revision | Compare with Previous | Blame | View Log