Subversion Repositories pci

#!/bin/csh -f
 
set arg_num = $#; # number of arguments
 
set iter = 1;
set all_iters = 2; # number of tests with DEFINES + test with user defined constants!
set failed = 0;
set all_tests = 0;
 
# Process arguments
 
set arg_regression = 0;
set arg_xilinx = 0;
set arg_artisan = 0;
 
if ($arg_num == 0) then
	@ arg_regression = 0;
else 
  if ($arg_num == 1) then
          if ($1 == "regression") then
		@ arg_regression = 1;
          else 
            if ($1 == "xilinx") then
		@ arg_xilinx = 1;
            else 
              if ($1 == "artisan") then
		@ arg_artisan = 1;
              endif
            endif
          endif
  else
    if ($arg_num == 2) then
          if ($1 == "regression") then
                @ arg_regression = 1;
          else
            if ($1 == "xilinx") then
                @ arg_xilinx = 1;
            else
              if ($1 == "artisan") then
                @ arg_artisan = 1;
              endif
            endif
          endif                                                                    
          if ($2 == "regression") then
                @ arg_regression = 1;
          else
            if ($2 == "xilinx") then
                @ arg_xilinx = 1;
            else
              if ($2 == "artisan") then
                @ arg_artisan = 1;
              endif
            endif
          endif                                                                                                          
    else
      if ($arg_num == 3) then
          if ($1 == "regression") then
                @ arg_regression = 1;
          else
            if ($1 == "xilinx") then
                @ arg_xilinx = 1;
            else
              if ($1 == "artisan") then
                @ arg_artisan = 1;
              endif
            endif
          endif
          if ($2 == "regression") then
                @ arg_regression = 1;
          else
            if ($2 == "xilinx") then
                @ arg_xilinx = 1;
            else
              if ($2 == "artisan") then
                @ arg_artisan = 1;
              endif
            endif
          endif  
          if ($3 == "regression") then
                @ arg_regression = 1;
          else
            if ($3 == "xilinx") then
                @ arg_xilinx = 1;
            else
              if ($3 == "artisan") then
                @ arg_artisan = 1;
              endif
            endif
          endif
      else
        echo "    Too many parameters ( $arg_num )"
        echo "    Maximum number of parameters is 3:"
        echo "      - regression"
        echo "      - xilinx"
        echo "      - artisan"
        exit
      endif
    endif
  endif
endif
 
 
# ITERATION LOOP
iteration:
 
echo ""
echo "<<<"
echo "<<< Iteration ${iter}"
echo "<<<" 
 
 
# Preparing defines into file
 
if ($arg_regression == 1) then
 if ($iter < $all_iters) then
  if (($arg_xilinx == 0) && ($arg_artisan == 0)) then
         if ($iter == 1) then
         echo ""
         echo "--- Using small GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2" > ./defines.args
         endif
         if ($iter == 2) then 
         echo ""
         echo "--- Using medium GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 3) then 
         echo ""
         echo "--- Using large GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 4) then 
         echo ""
         echo "--- Using small GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK100 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 5) then 
         echo ""
         echo "--- Using medium GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK100 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 6) then 
         echo ""
         echo "--- Using large GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL" > ./defines.args
         endif
         if ($iter == 7) then 
         echo ""
         echo "--- Using small GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK100 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE4" > ./defines.args
         endif
         if ($iter == 8) then 
         echo ""
         echo "--- Using medium GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 9) then 
         echo ""
         echo "--- Using large GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK100 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE3" > ./defines.args
         endif
         if ($iter == 10) then 
         echo ""
         echo "--- Using small GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE3" > ./defines.args
         endif
         if ($iter == 11) then 
         echo ""
         echo "--- Using medium GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2" > ./defines.args
         endif
         if ($iter == 12) then 
         echo ""
         echo "--- Using large GENERIC memory!" 
	 echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
  else 
    if (($arg_xilinx == 0) && ($arg_artisan == 1)) then
         if ($iter == 1) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2" > ./defines.args
         endif
         if ($iter == 2) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 3) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 4) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK100 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 5) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK100 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 6) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL" > ./defines.args
         endif
         if ($iter == 7) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK100 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE4" > ./defines.args
         endif
         if ($iter == 8) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 9) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK100 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE3" > ./defines.args
         endif
         if ($iter == 10) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE3" > ./defines.args
         endif
         if ($iter == 11) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2" > ./defines.args
         endif
         if ($iter == 12) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
    else 
      if (($arg_xilinx == 1) && ($arg_artisan == 1)) then
         if ($iter == 1) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2" > ./defines.args
         endif
         if ($iter == 2) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 3) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 4) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK100 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 5) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK100 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 6) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL" > ./defines.args
         endif
         if ($iter == 7) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK100 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE4" > ./defines.args
         endif
         if ($iter == 8) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 9) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK100 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE3" > ./defines.args
         endif
         if ($iter == 10) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE3" > ./defines.args
         endif
         if ($iter == 11) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2" > ./defines.args
         endif
         if ($iter == 12) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
      else
         if ($iter == 1) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2" > ./defines.args
         endif
         if ($iter == 2) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 3) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 4) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK100 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_RETRY_MAX -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 5) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK100 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 6) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL" > ./defines.args
         endif
         if ($iter == 7) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK100 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE4" > ./defines.args
         endif
         if ($iter == 8) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 9) then
         echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK100 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE3" > ./defines.args
         endif
         if ($iter == 10) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE3" > ./defines.args
         endif
         if ($iter == 11) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2" > ./defines.args
         endif
         if ($iter == 12) then
         echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_RETRY_MAX -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
       endif
     endif
  endif
 endif
endif
 
 
# Run NC-Verilog compiler
echo ""
echo "\t@@@"
echo "\t@@@ Compiling sources"
echo "\t@@@"
 
# creating .args file for ncvlog and adding main parameters
echo "-cdslib ../bin/cds.lib" > ./ncvlog.args
echo "-hdlvar ../bin/hdl.var" >> ./ncvlog.args
echo "-logfile ../log/ncvlog.log" >> ./ncvlog.args
echo "-update" >> ./ncvlog.args
echo "-messages" >> ./ncvlog.args
echo "-INCDIR ../../../bench/verilog" >> ./ncvlog.args
echo "-INCDIR ../../../rtl/verilog" >> ./ncvlog.args
# adding defines to .args file
if (($arg_regression == 1) && ($iter < $all_iters)) then 
    cat ./defines.args >> ./ncvlog.args
endif
# adding RTL and Sim files to .args file
cat ../bin/rtl_file_list.lst >> ./ncvlog.args
cat ../bin/sim_file_list.lst >> ./ncvlog.args                                                                                   
# adding device dependent files to .args file
if (($arg_xilinx == 1) && ($arg_artisan == 0)) then
      cat ../bin/xilinx_file_list.lst >> ./ncvlog.args
else
  if (($arg_xilinx == 0) && ($arg_artisan == 1)) then
      cat ../bin/artisan_file_list.lst >> ./ncvlog.args
  else
    if (($arg_xilinx == 1) && ($arg_artisan == 1)) then
      cat ../bin/xilinx_file_list.lst >> ./ncvlog.args
      cat ../bin/artisan_file_list.lst >> ./ncvlog.args
    endif
  endif
endif                                                                                                                       
ncvlog -file ./ncvlog.args; # > /dev/null;
echo ""
 
 
# Run the NC-Verilog elaborator (build the design hierarchy)
echo ""
echo "\t@@@"
echo "\t@@@ Building design hierarchy (elaboration)"
echo "\t@@@"
if ($arg_xilinx == 1) then
      ncelab -file ../bin/ncelab_xilinx.args; # > /dev/null;
else 
      ncelab -file ../bin/ncelab.args; # > /dev/null;
endif
echo ""
 
 
# Run the NC-Verilog simulator (simulate the design)
sim:
echo ""
echo "\t###"
echo "\t### Running tests "
echo "\t###"
ncsim -file ../bin/ncsim.args # > /dev/null
if ($status != 0) then
  @ failed += 1;
  @ all_tests += 1;
  exit
else
  @ all_tests += 1;
  mv ../log/pci_mon.log ../log/i${iter}-pci_mon.log
  mv ../log/pci_tb.log ../log/i${iter}-pci_tb.log
  mv ../log/pciu_mon.log ../log/i${iter}-pciu_mon.log
  mv ../log/wbu_mon.log ../log/i${iter}-wbu_mon.log
endif
echo "" 
 
 
@ iter += 1;
 
if (($arg_regression == 1) && ($iter < $all_iters)) then
	goto iteration
else
        rm ./defines.args
	echo ""
	echo "<<<"
	echo "<<< End of Regression Iterations"
	echo "<<<"
	echo "<<< Failed $failed out of $all_tests"
	echo "<<<"
endif