URL
https://opencores.org/ocsvn/pci/pci/trunk
Subversion Repositories pci
[/] [pci/] [tags/] [rel_13/] [apps/] [test/] [syn/] [synplify/] [pci_test_top.prj] - Rev 132
Go to most recent revision | Compare with Previous | Blame | View Log
#-- Synplicity, Inc.
#-- Version 7.3.4
#-- Project file /shared/projects/pci/mihad/pci_new_bist/apps/test/syn/synplify/pci_test_top.prj
#-- Written on Tue Dec 16 12:47:51 2003
#add_file options
add_file -verilog "$LIB/xilinx/virtex.v"
add_file -verilog "../../../../rtl/verilog/pci_async_reset_flop.v"
add_file -verilog "../../rtl/verilog/pci_bridge32.v"
add_file -verilog "../../../../rtl/verilog/pci_cbe_en_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_conf_cyc_addr_dec.v"
add_file -verilog "../../../../rtl/verilog/pci_conf_space.v"
add_file -verilog "../../../../rtl/verilog/pci_cur_out_reg.v"
add_file -verilog "../../../../rtl/verilog/pci_delayed_sync.v"
add_file -verilog "../../../../rtl/verilog/pci_delayed_write_reg.v"
add_file -verilog "../../../../rtl/verilog/pci_frame_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_frame_en_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_frame_load_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_in_reg.v"
add_file -verilog "../../../../rtl/verilog/pci_io_mux_ad_en_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_io_mux_ad_load_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_io_mux.v"
add_file -verilog "../../../../rtl/verilog/pci_irdy_out_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_mas_ad_en_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_mas_ad_load_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_mas_ch_state_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_master32_sm_if.v"
add_file -verilog "../../../../rtl/verilog/pci_master32_sm.v"
add_file -verilog "../../../../rtl/verilog/pci_out_reg.v"
add_file -verilog "../../../../rtl/verilog/pci_par_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_parity_check.v"
add_file -verilog "../../../../rtl/verilog/pci_pci_decoder.v"
add_file -verilog "../../../../rtl/verilog/pci_pcir_fifo_control.v"
add_file -verilog "../../../../rtl/verilog/pci_pci_tpram.v"
add_file -verilog "../../../../rtl/verilog/pci_pciw_fifo_control.v"
add_file -verilog "../../../../rtl/verilog/pci_pciw_pcir_fifos.v"
add_file -verilog "../../../../rtl/verilog/pci_perr_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_perr_en_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_ram_16x40d.v"
add_file -verilog "../../../../rtl/verilog/pci_rst_int.v"
add_file -verilog "../../../../rtl/verilog/pci_serr_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_serr_en_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_sync_module.v"
add_file -verilog "../../../../rtl/verilog/pci_target32_clk_en.v"
add_file -verilog "../../../../rtl/verilog/pci_target32_devs_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_target32_interface.v"
add_file -verilog "../../../../rtl/verilog/pci_target32_sm.v"
add_file -verilog "../../../../rtl/verilog/pci_target32_stop_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_target32_trdy_crit.v"
add_file -verilog "../../../../rtl/verilog/pci_target_unit.v"
add_file -verilog "../../../../rtl/verilog/pci_wb_addr_mux.v"
add_file -verilog "../../../../rtl/verilog/pci_wb_decoder.v"
add_file -verilog "../../../../rtl/verilog/pci_wb_master.v"
add_file -verilog "../../../../rtl/verilog/pci_wbr_fifo_control.v"
add_file -verilog "../../../../rtl/verilog/pci_wb_slave_unit.v"
add_file -verilog "../../../../rtl/verilog/pci_wb_slave.v"
add_file -verilog "../../../../rtl/verilog/pci_wb_tpram.v"
add_file -verilog "../../../../rtl/verilog/pci_wbw_fifo_control.v"
add_file -verilog "../../../../rtl/verilog/pci_wbw_wbr_fifos.v"
add_file -verilog "../../../../rtl/verilog/pci_synchronizer_flop.v"
add_file -constraint "pci_test_top_2clks.sdc"
add_file -verilog "../../../../rtl/verilog/pci_wbs_wbb3_2_wbb2.v"
add_file -verilog "../../rtl/verilog/test.v"
add_file -verilog "../../rtl/verilog/pci_test_top_2clks.v"
#implementation: "rev_1"
impl -add rev_1
#device options
set_option -technology SPARTAN2
set_option -part XC2S200
set_option -package PQ208
set_option -speed_grade -6
#compilation/mapping options
set_option -default_enum_encoding default
set_option -symbolic_fsm_compiler 0
set_option -resource_sharing 1
set_option -use_fsm_explorer 0
#map options
set_option -frequency 50.000
set_option -fanout_limit 16
set_option -disable_io_insertion 0
set_option -pipe 0
set_option -fixgatedclocks 0
set_option -retiming 0
set_option -modular 0
set_option -update_models_cp 0
set_option -verification_mode 0
#simulation options
set_option -write_verilog 0
set_option -write_vhdl 0
#automatic place and route (vendor) options
set_option -write_apr_constraint 1
#set result format/file last
project -result_file "rev_1/pci_test_top.edf"
#implementation attributes
set_option -vlog_std v2001
#implementation attributes
set_option -random_floorplan 0
set_option -popfeed 1
set_option -constprop 1
set_option -createhierarchy 0
set_option -floorplan ""
set_option -nfilter_user_path ""
set_option -pin_assignment ""
set_option -include_path "../../rtl/verilog/;../../../../rtl/verilog/"
impl -active "rev_1"
Go to most recent revision | Compare with Previous | Blame | View Log