Subversion Repositories pci

#!/bin/csh -f
 
set arg_num = $#argv; # number of arguments
 
if ($arg_num > 4) then
    echo "    Too many parameters ( $arg_num )"
    echo "    Maximum number of parameters is 4:"
    echo "      - xilinx"
    echo "      - artisan"
    echo "      - regression"
    echo "      - waves"
    exit
endif
 
# current iterration
set iter = 1;
# number of tests with DEFINES + test with user defined constants!
set all_iterations = 13;
 
# variables
set iter_failed = 0;
set all_iters = 0;
set subtest_failed = 0;
set sub_tests = 0;
set test_failed = 0;
set all_tests = 0;
 
# Process arguments
set arg_regression = 0;
set arg_xilinx = 0;
set arg_artisan = 0;
set arg_waves = 0;
set arg_vs_hdtp = 0
set arg_dis_comp_exp_test = 0
 
@ arg_num     = 1
set arg_check = 0
 
while($arg_num <= $#argv)
    if ($argv[$arg_num] == "help") then
        goto help
    endif
 
    if ($argv[$arg_num] == "regression") then
        @ arg_regression = 1
        @ arg_check      = $arg_check + 1
    endif
 
    if ($argv[$arg_num] == "xilinx") then
        @ arg_xilinx = 1
        @ arg_check      = $arg_check + 1
    endif
 
    if($argv[$arg_num] == "artisan") then
        @ arg_artisan = 1
        @ arg_check      = $arg_check + 1
    endif
 
    if ($argv[$arg_num] == "waves") then
        @ arg_waves = 1
        @ arg_check      = $arg_check + 1
    endif
 
    if ($argv[$arg_num] == "vs_two_port") then
        @ arg_vs_hdtp = 1
        @ arg_check   = $arg_check + 1
    endif
 
    if ($argv[$arg_num] == "disable_completion_expired_tests") then
        @ arg_dis_comp_exp_test = 1
        @ arg_check   = $arg_check + 1
    endif
 
    if ($arg_check != $arg_num) then
        echo "Invalid argument found: $argv[$arg_num]"
        echo
        goto help
    endif
    @ arg_num = $arg_num + 1
end
 
# ITERATION LOOP
iteration:
 
echo ""
echo "<<<"
echo "<<< Iteration ${iter}"
echo "<<<" 
 
 
# Preparing defines into file
 
if ($arg_regression == 1) then
 if ($iter < $all_iterations) then
  if (($arg_xilinx == 0) && ($arg_artisan == 0)) then
         if ($iter == 1) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_SMALL_GENERIC, WB_DECODE_FAST, PCI_DECODE_MAX, " 
         echo "\tWB_DECODE_MIN, PCI33, WB_CLK10, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, " 
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2" > ./defines.args
         endif
         if ($iter == 2) then 
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_MEDIUM_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MED, PCI33, WB_CLK66, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2, "
         echo "\tPCI_IMAGE3, PCI_IMAGE4, PCI_IMAGE5, WB_IMAGE2, WB_IMAGE5. " 
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 3) then 
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI66, WB_CLK66, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, WB_IMAGE5. " 
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 4) then 
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_SMALL_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MIN, PCI66, WB_CLK220, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, PCI_IMAGE0, PCI_IMAGE5, WB_IMAGE4. " 
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK220 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 5) then 
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_MEDIUM_GENERIC, WB_DECODE_FAST, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI33, WB_CLK220, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2, "
         echo "\tWB_IMAGE2, WB_IMAGE3, WB_IMAGE4. " 
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK220 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 6) then 
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MED, PCI66, WB_CLK10, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL" > ./defines.args
         endif
         if ($iter == 7) then 
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_SMALL_GENERIC, WB_DECODE_FAST, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MIN, PCI66, WB_CLK220, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE4. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK220 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE4" > ./defines.args
         endif
         if ($iter == 8) then 
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_MEDIUM_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MED, PCI66, WB_CLK10, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE2, PCI_IMAGE3, PCI_IMAGE4, "
         echo "\tPCI_IMAGE5, WB_IMAGE2, WB_IMAGE3, WB_IMAGE4, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 9) then 
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI33, WB_CLK220, ACTIVE_HIGH_OE, ADDR_TRAN_IMPL, "
         echo "\tWB_CNF_BASE_ZERO, NO_CNF_IMAGE, WB_IMAGE3. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK220 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE3" > ./defines.args
         endif
         if ($iter == 10) then 
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_SMALL_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MIN, PCI33, WB_CLK66, ACTIVE_HIGH_OE, ADDR_TRAN_IMPL, "
         echo "\tWB_CNF_BASE_ZERO, NO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE3. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE3" > ./defines.args
         endif
         if ($iter == 11) then 
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_MEDIUM_GENERIC, WB_DECODE_FAST, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI66, WB_CLK66, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE2, PCI_IMAGE3, PCI_IMAGE4, "
         echo "\tPCI_IMAGE5, WB_IMAGE2. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2" > ./defines.args
         endif
         if ($iter == 12) then 
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MED, PCI33, WB_CLK10, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, WB_IMAGE2, WB_IMAGE3, WB_IMAGE4, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
 
        if ($arg_dis_comp_exp_test) then
            echo "-DEFINE DISABLE_COMPLETION_EXPIRED_TESTS" >> ./defines.args
        endif
  else 
    if (($arg_xilinx == 0) && ($arg_artisan == 1)) then
         if ($iter == 1) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_SMALL_GENERIC, WB_DECODE_FAST, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MIN, PCI33, WB_CLK10, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2" > ./defines.args
         endif
         if ($iter == 2) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_MEDIUM_ARTISAN, WB_DECODE_MEDIUM, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MED, PCI33, WB_CLK66, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2, "
         echo "\tPCI_IMAGE3, PCI_IMAGE4, PCI_IMAGE5, WB_IMAGE2, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 3) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI66, WB_CLK66, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 4) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_SMALL_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MIN, PCI66, WB_CLK220, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, PCI_IMAGE0, PCI_IMAGE5, WB_IMAGE4. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK220 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 5) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_MEDIUM_ARTISAN, WB_DECODE_FAST, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI33, WB_CLK220, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2, "
         echo "\tWB_IMAGE2, WB_IMAGE3, WB_IMAGE4. " 
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK220 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 6) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MED, PCI66, WB_CLK10, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL" > ./defines.args
         endif
         if ($iter == 7) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_SMALL_GENERIC, WB_DECODE_FAST, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MIN, PCI66, WB_CLK220, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE4. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK220 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE4" > ./defines.args
         endif
         if ($iter == 8) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_MEDIUM_ARTISAN, WB_DECODE_MEDIUM, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MED, PCI66, WB_CLK10, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE2, PCI_IMAGE3, PCI_IMAGE4, "
         echo "\tPCI_IMAGE5, WB_IMAGE2, WB_IMAGE3, WB_IMAGE4, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 9) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI33, WB_CLK220, ACTIVE_HIGH_OE, ADDR_TRAN_IMPL, "
         echo "\tWB_CNF_BASE_ZERO, NO_CNF_IMAGE, WB_IMAGE3. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK220 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE3" > ./defines.args
         endif
         if ($iter == 10) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_SMALL_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MIN, PCI33, WB_CLK66, ACTIVE_HIGH_OE, ADDR_TRAN_IMPL, "
         echo "\tWB_CNF_BASE_ZERO, NO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE3. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE3" > ./defines.args
         endif
         if ($iter == 11) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_MEDIUM_ARTISAN, WB_DECODE_FAST, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI66, WB_CLK66, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE2, PCI_IMAGE3, PCI_IMAGE4, "
         echo "\tPCI_IMAGE5, WB_IMAGE2. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2" > ./defines.args
         endif
         if ($iter == 12) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MED, PCI33, WB_CLK10, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, WB_IMAGE2, WB_IMAGE3, WB_IMAGE4, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
 
         if ($arg_dis_comp_exp_test) then
            echo "-DEFINE DISABLE_COMPLETION_EXPIRED_TESTS" >> ./defines.args
         endif
    else 
      if (($arg_xilinx == 1) && ($arg_artisan == 1)) then
         if ($iter == 1) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_SMALL_XILINX, WB_DECODE_FAST, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MIN, PCI33, WB_CLK10, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2" > ./defines.args
         endif
         if ($iter == 2) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_MEDIUM_ARTISAN, WB_DECODE_MEDIUM, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MED, PCI33, WB_CLK66, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2, "
         echo "\tPCI_IMAGE3, PCI_IMAGE4, PCI_IMAGE5, WB_IMAGE2, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 3) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI66, WB_CLK66, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 4) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_SMALL_XILINX, WB_DECODE_SLOW, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MIN, PCI66, WB_CLK220, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, PCI_IMAGE0, PCI_IMAGE5, WB_IMAGE4. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK220 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 5) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_MEDIUM_ARTISAN, WB_DECODE_FAST, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI33, WB_CLK220, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2, "
         echo "\tWB_IMAGE2, WB_IMAGE3, WB_IMAGE4. " 
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK220 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 6) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MED, PCI66, WB_CLK10, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL" > ./defines.args
         endif
         if ($iter == 7) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_SMALL_XILINX, WB_DECODE_FAST, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MIN, PCI66, WB_CLK220, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE4. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK220 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE4" > ./defines.args
         endif
         if ($iter == 8) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_MEDIUM_ARTISAN, WB_DECODE_MEDIUM, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MED, PCI66, WB_CLK10, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE2, PCI_IMAGE3, PCI_IMAGE4, "
         echo "\tPCI_IMAGE5, WB_IMAGE2, WB_IMAGE3, WB_IMAGE4, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 9) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI33, WB_CLK220, ACTIVE_HIGH_OE, ADDR_TRAN_IMPL, "
         echo "\tWB_CNF_BASE_ZERO, NO_CNF_IMAGE, WB_IMAGE3. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK220 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE3" > ./defines.args
         endif
         if ($iter == 10) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_SMALL_XILINX, WB_DECODE_SLOW, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MIN, PCI33, WB_CLK66, ACTIVE_HIGH_OE, ADDR_TRAN_IMPL, "
         echo "\tWB_CNF_BASE_ZERO, NO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE3. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE3" > ./defines.args
         endif
         if ($iter == 11) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_MEDIUM_ARTISAN, WB_DECODE_FAST, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI66, WB_CLK66, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE2, PCI_IMAGE3, PCI_IMAGE4, "
         echo "\tPCI_IMAGE5, WB_IMAGE2. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_ARTISAN -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2" > ./defines.args
         endif
         if ($iter == 12) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MED, PCI33, WB_CLK10, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, WB_IMAGE2, WB_IMAGE3, WB_IMAGE4, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
 
         if ($arg_dis_comp_exp_test) then
            echo "-DEFINE DISABLE_COMPLETION_EXPIRED_TESTS" >> ./defines.args
         endif
      else
         if ($iter == 1) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_SMALL_XILINX, WB_DECODE_FAST, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MIN, PCI33, WB_CLK10, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2" > ./defines.args
         endif
         if ($iter == 2) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_MEDIUM_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MED, PCI33, WB_CLK66, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2, "
         echo "\tPCI_IMAGE3, PCI_IMAGE4, PCI_IMAGE5, WB_IMAGE2, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 3) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI66, WB_CLK66, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 4) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_SMALL_XILINX, WB_DECODE_SLOW, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MIN, PCI66, WB_CLK220, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, PCI_IMAGE0, PCI_IMAGE5, WB_IMAGE4. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK220 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 5) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_MEDIUM_GENERIC, WB_DECODE_FAST, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI33, WB_CLK220, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL, PCI_IMAGE0, PCI_IMAGE2, "
         echo "\tWB_IMAGE2, WB_IMAGE3, WB_IMAGE4. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK220 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4" > ./defines.args
         endif
         if ($iter == 6) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MED, PCI66, WB_CLK10, ACTIVE_LOW_OE, REGISTER_WBM_OUTPUTS, "
         echo "\tREGISTER_WBS_OUTPUTS, ADDR_TRAN_IMPL. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_LOW_OE -DEFINE REGISTER_WBM_OUTPUTS -DEFINE REGISTER_WBS_OUTPUTS -DEFINE ADDR_TRAN_IMPL" > ./defines.args
         endif
         if ($iter == 7) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_SMALL_XILINX, WB_DECODE_FAST, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MIN, PCI66, WB_CLK220, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE4. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MIN -DEFINE PCI66 -DEFINE WB_CLK220 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE4" > ./defines.args
         endif
         if ($iter == 8) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_MEDIUM_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MED, PCI66, WB_CLK10, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE2, PCI_IMAGE3, PCI_IMAGE4, "
         echo "\tPCI_IMAGE5, WB_IMAGE2, WB_IMAGE3, WB_IMAGE4, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MED -DEFINE PCI66 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
         if ($iter == 9) then
         echo "<<< Defines:"
         echo "\tHOST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_SLOW, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI33, WB_CLK220, ACTIVE_HIGH_OE, ADDR_TRAN_IMPL, "
         echo "\tWB_CNF_BASE_ZERO, NO_CNF_IMAGE, WB_IMAGE3. "
     echo "-DEFINE REGRESSION -DEFINE HOST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI33 -DEFINE WB_CLK220 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE3" > ./defines.args
         endif
         if ($iter == 10) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_SMALL_XILINX, WB_DECODE_SLOW, PCI_DECODE_MED, "
         echo "\tWB_DECODE_MIN, PCI33, WB_CLK66, ACTIVE_HIGH_OE, ADDR_TRAN_IMPL, "
         echo "\tWB_CNF_BASE_ZERO, NO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE3. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_SMALL_XILINX -DEFINE WB_DECODE_SLOW -DEFINE PCI_DECODE_MED -DEFINE WB_DECODE_MIN -DEFINE PCI33 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE ADDR_TRAN_IMPL -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE3" > ./defines.args
         endif
         if ($iter == 11) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_MEDIUM_GENERIC, WB_DECODE_FAST, PCI_DECODE_MIN, "
         echo "\tWB_DECODE_MAX, PCI66, WB_CLK66, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, PCI_IMAGE0, PCI_IMAGE2, PCI_IMAGE3, PCI_IMAGE4, "
         echo "\tPCI_IMAGE5, WB_IMAGE2. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_MEDIUM_GENERIC -DEFINE WB_DECODE_FAST -DEFINE PCI_DECODE_MIN -DEFINE WB_DECODE_MAX -DEFINE PCI66 -DEFINE WB_CLK66 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE PCI_IMAGE0 -DEFINE PCI_IMAGE2 -DEFINE PCI_IMAGE3 -DEFINE PCI_IMAGE4 -DEFINE PCI_IMAGE5 -DEFINE WB_IMAGE2" > ./defines.args
         endif
         if ($iter == 12) then
         echo "<<< Defines:"
         echo "\tGUEST, REGR_FIFO_LARGE_GENERIC, WB_DECODE_MEDIUM, PCI_DECODE_MAX, "
         echo "\tWB_DECODE_MED, PCI33, WB_CLK10, ACTIVE_HIGH_OE, WB_CNF_BASE_ZERO, "
         echo "\tNO_CNF_IMAGE, WB_IMAGE2, WB_IMAGE3, WB_IMAGE4, WB_IMAGE5. "
     echo "-DEFINE REGRESSION -DEFINE GUEST -DEFINE REGR_FIFO_LARGE_GENERIC -DEFINE WB_DECODE_MEDIUM -DEFINE PCI_DECODE_MAX -DEFINE WB_DECODE_MED -DEFINE PCI33 -DEFINE WB_CLK10 -DEFINE ACTIVE_HIGH_OE -DEFINE WB_CNF_BASE_ZERO -DEFINE NO_CNF_IMAGE -DEFINE WB_IMAGE2 -DEFINE WB_IMAGE3 -DEFINE WB_IMAGE4 -DEFINE WB_IMAGE5" > ./defines.args
         endif
 
         if ($arg_dis_comp_exp_test) then
            echo "-DEFINE DISABLE_COMPLETION_EXPIRED_TESTS" >> ./defines.args
         endif
 
       endif
     endif
  endif
 endif
endif
 
 
# Run NC-Verilog compiler
echo ""
echo "\t@@@"
echo "\t@@@ Compiling sources"
echo "\t@@@"
 
# creating .args file for ncvlog and adding main parameters
echo "-cdslib ../bin/cds.lib" > ./ncvlog.args
echo "-hdlvar ../bin/hdl.var" >> ./ncvlog.args
echo "-logfile ../log/ncvlog.log" >> ./ncvlog.args
echo "-update" >> ./ncvlog.args
echo "-messages" >> ./ncvlog.args
echo "-INCDIR ../../../bench/verilog" >> ./ncvlog.args
echo "-INCDIR ../../../rtl/verilog" >> ./ncvlog.args
# adding defines to .args file
if (($arg_regression == 1) && ($iter < $all_iterations)) then 
    cat ./defines.args >> ./ncvlog.args
endif
# adding RTL and Sim files to .args file
cat ../bin/rtl_file_list.lst >> ./ncvlog.args
cat ../bin/sim_file_list.lst >> ./ncvlog.args                                                                                   
# adding device dependent files to .args file
if ($arg_xilinx == 1) then
    cat ../bin/xilinx_file_list.lst >> ./ncvlog.args
endif
 
if ($arg_artisan == 1) then
    cat ../bin/artisan_file_list.lst >> ./ncvlog.args
endif
 
if ($arg_vs_hdtp == 1) then
    cat ../bin/vs_file_list.lst >> ./ncvlog.args
endif
 
ncvlog -file ./ncvlog.args > /dev/null;
echo ""
 
 
# Run the NC-Verilog elaborator (build the design hierarchy)
echo ""
echo "\t@@@"
echo "\t@@@ Building design hierarchy (elaboration)"
echo "\t@@@"
if ($arg_xilinx == 1) then
      ncelab -file ../bin/ncelab_xilinx.args > /dev/null;
else 
      ncelab -file ../bin/ncelab.args > /dev/null;
endif
echo ""
 
 
# Run the NC-Verilog simulator (simulate the design)
echo ""
echo "\t###"
echo "\t### Running tests (this takes a long time!)"
echo "\t###"
 
# creating ncsim.args file for ncsim and adding main parameters
echo "-cdslib ../bin/cds.lib" > ./ncsim.args
echo "-hdlvar ../bin/hdl.var" >> ./ncsim.args
echo "-logfile ../log/ncsim.log" >> ./ncsim.args
echo "-messages" >> ./ncsim.args
echo "-tcl" >> ./ncsim.args
if ($arg_waves == 1) then
  echo "-input ../bin/ncsim_waves.rc" >> ./ncsim.args
else
  echo "-input ../bin/ncsim.rc" >> ./ncsim.args 
endif
echo "worklib.bridge32:fun" >> ./ncsim.args
 
ncsim -file ./ncsim.args #> /dev/null
 
if ($status != 0) then
  echo ""
  echo "TESTS couldn't start due to Errors!"
  echo ""
  exit
else
  grep -c "FAILED" ../log/pci_tb.log > ./result_fail.out
  grep -c "SUCCESSFULL" ../log/pci_tb.log > ./result_succ.out
 
  set subtest_failed = `tail -1 result_fail.out`;
  set sub_tests = `tail -1 result_succ.out`;
  @ sub_tests = $sub_tests + $subtest_failed;
 
  if ($subtest_failed != 0) then
    echo "\t### FAILED $subtest_failed out of $sub_tests testcases of $iter. iteration!"
    echo "\t###" 
    @ iter_failed += 1;
    @ all_iters += 1;
  else
    echo "\t### Passed all $sub_tests testcases of $iter. iteration!"
    echo "\t###" 
    @ all_iters += 1;
  endif
 
  if (($arg_regression == 1) && ($iter < $all_iterations)) then
    if ($arg_waves == 1) then 
      mv ../out/waves.shm ../out/i${iter}_waves.shm
    endif
    mv ../log/pci_mon.log ../log/i${iter}_pci_mon.log
    mv ../log/pci_tb.log ../log/i${iter}_pci_tb.log
    mv ../log/pciu_mon.log ../log/i${iter}_pciu_mon.log
    mv ../log/wbu_mon.log ../log/i${iter}_wbu_mon.log
    mv ../log/ncsim.log ../log/i${iter}_ncsim.log
  endif
endif
echo "" 
 
@ test_failed = $test_failed + $subtest_failed;
@ all_tests = $all_tests + $sub_tests;
 
@ iter += 1;
 
if (($arg_regression == 1) && ($iter <= $all_iterations)) then
    rm -f ../bin/INCA_libs/worklib/*
    rm -f ../bin/INCA_libs/worklib/.*
    goto iteration
else
    rm ./defines.args
    echo ""
    echo "<<<"
    echo "<<< End of Regression Iterations"
    echo "<<<"
    echo "<<<"
    echo "<<< FAILED $iter_failed out of $all_iters iterations!"
    echo "<<<"
    echo "<<< FAILED $test_failed out of $all_tests testcases!"
    echo "<<<"
    echo "<<< -------------------------------------------------"
    echo "<<<"
    echo "<<< See following files for detailed test results:"
    echo "<<<   ../log/*pci_tb.log "
    echo "<<<   ../log/*pci_mon.log "
    echo "<<<   ../log/*pciu_mon.log "
    echo "<<<   ../log/*wbu_mon.log "
    echo "<<<   ../log/*ncsim.log "
    echo "<<<"
endif
exit
 
help:
        echo ""
        echo "Script arguments:"
        echo ""
        echo "regression  : run all implemented regression iterations on PCI Bridge Design"
        echo ""
        echo "xilinx      : if you want to run simulation with xilinx RAM primitives. You have to provide RAM16X1D.v, RAMB4_S16_S16.v and glbl.v simulation files."
        echo "            : you have to edit ../bin/xilinx_file_list.lst file with the correct paths to these files. Leave other paths as they are!"
        echo ""
        echo "artisan     : if you want to run simulation with artisan ASIC library vendor RAM primitives. You have to provide simulation models for these, edit ../bin/artisan_file_list.lst,"
        echo "            : and optionaly ../../../rtl/verilog/pci_user_constants.v, ../../../bench/verilog/pci_regression_constants.v, ../../../rtl/verilog/wb_tpram.v and ../../../rtl/verilog/pci_tpram.v"
        echo ""
        echo "waves       : if you want to dump all the signals in the testbench to the signalscan output file in ../out/ directory"
        echo ""
        echo "vs_two_port : if you want to run simulation with virtual silicon ASIC library vendor RAM primitives. You have to provide simulation models for these, edit ../bin/vs_file_list.lst,"
        echo "            : and optionaly ../../../rtl/verilog/pci_user_constants.v, ../../../bench/verilog/pci_regression_constants.v, ../../../rtl/verilog/wb_tpram.v and ../../../rtl/verilog/pci_tpram.v"
        echo ""
        echo "disable_completion_expired_tests : if you want to disable completion expiration testing during regression run, because these are time consuming tests"
        echo ""
exit