URL
https://opencores.org/ocsvn/pci/pci/trunk
Subversion Repositories pci
[/] [pci/] [tags/] [rel_9/] [rtl/] [verilog/] [pci_pci_decoder.v] - Rev 154
Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// File name: pci_decoder.v //// //// //// //// This file is part of the "PCI bridge" project //// //// http://www.opencores.org/cores/pci/ //// //// //// //// Author(s): //// //// - Tadej Markovic, tadej@opencores.org //// //// //// //// All additional information is avaliable in the README.txt //// //// file. //// //// //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Tadej Markovic, tadej@opencores.org //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.3 2002/02/01 15:25:12 mihad // Repaired a few bugs, updated specification, added test bench files and design document // // Revision 1.2 2001/10/05 08:14:28 mihad // Updated all files with inclusion of timescale file for simulation purposes. // // Revision 1.1.1.1 2001/10/02 15:33:46 mihad // New project directory structure // // `include "pci_constants.v" // synopsys translate_off `include "timescale.v" // synopsys translate_on module pci_pci_decoder (hit, addr_out, addr_in, bc_in, base_addr, mask_addr, tran_addr, at_en, mem_io_space, mem_en, io_en) ; // Decoding address size parameter - for FPGAs 1MegByte is recommended // MAXIMUM is 20 (4KBytes), length 12 is 1 MByte !!! parameter decode_len = 12 ; //########################################################################################################### // ALL COMMENTS are written as there were decode_len 20. This number and 12 (32 - 20) are assigning the // numbers of decoded and compared bits, etc. //########################################################################################################### /*----------------------------------------------------------------------------------------------------------- DECODER interface decodes input address (ADDR_IN); what means that it validates (HIT), if input address falls within the defined image space boundaries. Image space boundarie is defined with image base address register (BASE_ADDR) and address mask register (MASK_ADDR). Beside that, it also translates (maps) the input address to the output address (ADDR_OUT), regarding the translation address register (TRAN_ADDR) and the address mask register. -----------------------------------------------------------------------------------------------------------*/ // output control output hit ; // output address output [31:0] addr_out ; // input address and bus command input [31:0] addr_in ; input [3:0] bc_in ; // input registers - 12 LSbits are not valid since the smallest possible size is 4KB ! input [31:(32-decode_len)] base_addr ; input [31:(32-decode_len)] mask_addr ; input [31:(32-decode_len)] tran_addr ; // input bit[2] of the Image Control register used to enable the address translation ! input at_en ; // memory or io space selection and its enable signals ! input mem_io_space ; input mem_en ; input io_en ; /*----------------------------------------------------------------------------------------------------------- Internal signals ! -----------------------------------------------------------------------------------------------------------*/ // bit[31] if address mask register is IMAGE ENABLE bit (img_en) wire img_en ; // addr_in_compare are masked input address bits that are compared with masked base_addr wire [31:(32-decode_len)] addr_in_compare ; // base_addr_compare are masked base address bits that are compared with masked addr_in wire [31:(32-decode_len)] base_addr_compare ; /*----------------------------------------------------------------------------------------------------------- Decoding the input address! This logic produces the loghest path in this module! 20 MSbits of input addres are as well as base address (20 bits) masked with corrected address mask. Only masked bits of each vector are actually logically compared. Bit[31] of address mask register is used to enable the image space ! Because of PCI bus specifications, there is also the comparison of memory/io selection (mem_io_space) and its appropriate enable bit (mem_en / io_en). -----------------------------------------------------------------------------------------------------------*/ assign addr_in_compare = (addr_in[31:(32-decode_len)] & mask_addr) ; assign base_addr_compare = (base_addr & mask_addr) ; assign img_en = mask_addr[31] ; wire addr_hit = (addr_in_compare == base_addr_compare) ; wire space_hit = (!mem_io_space && mem_en && img_en) || (mem_io_space && io_en && img_en) ; reg bc_hit ; always@(bc_in or mem_io_space) begin // Allowed bus commands for accesses through IMAGEs to WB bus - BC_CONF_WRITE/READ are not used with address claim!!! case ( {bc_in[3:1], mem_io_space} ) 4'b001_1, // BC_IO_READ or BC_IO_WRITE and IO space 4'b011_0, // BC_MEM_READ or BC_MEM_WRITE and MEM space 4'b110_0, // BC_MEM_READ_MUL and MEM space - BC_DUAL_ADDR_CYC must NOT be allowed! 4'b111_0: // BC_MEM_READ_LN or BC_MEM_WRITE_INVAL and MEM space bc_hit <= 1'b1 ; default: bc_hit <= 1'b0 ; endcase end wire bc_forbid = bc_in[3] && bc_in[2] && !bc_in[1] && bc_in[0] ; // BC_DUAL_ADDR_CYC must NOT be allowed! assign hit = (addr_hit && space_hit && bc_hit && !bc_forbid) ; /*----------------------------------------------------------------------------------------------------------- Translating the input address! Translation of input address is not implemented if ADDR_TRAN_IMPL is not defined 20 MSbits of input address are masked with negated value of the corrected address mask in order to get address bits of the input address which won't be replaced with translation address bits. Translation address bits (20 bits) are masked with corrected address mask. Only masked bits of vector are actually valid, all others are zero. Boath vectors are bit-wise ORed in order to get the valid translation address with an offset of an input address. 12 LSbits of an input address are assigned to 12 LSbits of an output addres. -----------------------------------------------------------------------------------------------------------*/ `ifdef ADDR_TRAN_IMPL // if Address Translation Enable bit is set, then translation address is used othervise input address is used! // addr_in_combine input address bits are not replaced with translation address! wire [31:(32-decode_len)] addr_in_combine ; // tran_addr_combine are masked and combined with addr_in_combine! reg [31:(32-decode_len)] tran_addr_combine ; assign addr_in_combine = (addr_in[31:(32-decode_len)] & ~mask_addr) ; always@(at_en or tran_addr or mask_addr or addr_in) begin if (at_en) begin tran_addr_combine <= (tran_addr & mask_addr) ; end else begin tran_addr_combine <= (addr_in[31:(32-decode_len)] & mask_addr) ; end end assign addr_out[31:(32-decode_len)] = (addr_in_combine | tran_addr_combine) ; assign addr_out[(31-decode_len):0] = addr_in [(31-decode_len):0] ; `else assign addr_out = addr_in ; `endif endmodule