URL
https://opencores.org/ocsvn/pcie_ds_dma/pcie_ds_dma/trunk
Subversion Repositories pcie_ds_dma
[/] [pcie_ds_dma/] [trunk/] [core/] [ds_dma64/] [pcie_src/] [pcie_core64_m1/] [source/] [cmm_errman_nfl.v] - Rev 15
Go to most recent revision | Compare with Previous | Blame | View Log
//----------------------------------------------------------------------------- // // (c) Copyright 2009-2010 Xilinx, Inc. All rights reserved. // // This file contains confidential and proprietary information // of Xilinx, Inc. and is protected under U.S. and // international copyright and other intellectual property // laws. // // DISCLAIMER // This disclaimer is not a license and does not grant any // rights to the materials distributed herewith. Except as // otherwise provided in a valid license issued to you by // Xilinx, and to the maximum extent permitted by applicable // law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND // WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES // AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING // BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- // INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and // (2) Xilinx shall not be liable (whether in contract or tort, // including negligence, or under any other theory of // liability) for any loss or damage of any kind or nature // related to, arising under or in connection with these // materials, including for any direct, or any indirect, // special, incidental, or consequential loss or damage // (including loss of data, profits, goodwill, or any type of // loss or damage suffered as a result of any action brought // by a third party) even if such damage or loss was // reasonably foreseeable or Xilinx had been advised of the // possibility of the same. // // CRITICAL APPLICATIONS // Xilinx products are not designed or intended to be fail- // safe, or for use in any application requiring fail-safe // performance, such as life-support or safety devices or // systems, Class III medical devices, nuclear facilities, // applications related to the deployment of airbags, or any // other applications that could lead to death, personal // injury, or severe property or environmental damage // (individually and collectively, "Critical // Applications"). Customer assumes the sole risk and // liability of any use of Xilinx products in Critical // Applications, subject only to applicable laws and // regulations governing limitations on product liability. // // THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS // PART OF THIS FILE AT ALL TIMES. // //----------------------------------------------------------------------------- // Project : V5-Block Plus for PCI Express // File : cmm_errman_nfl.v //-------------------------------------------------------------------------------- //-------------------------------------------------------------------------------- /*********************************************************************** Description: This module figures out what to do for non-fatal errors: 1) count up or count down, 2) how much to add or to subtract. It returns the number and a add/subtract_b signals to the error tracking counter. The outputs are based on how many errors are asserted by the error reporting modules. ***********************************************************************/ module cmm_errman_nfl ( nfl_num, // Output inc_dec_b, cfg_err_cpl_timeout_n, decr_nfl, rst, clk ); output nfl_num; output inc_dec_b; // 1 = increment, 0 = decrement input cfg_err_cpl_timeout_n; input decr_nfl; input rst; input clk; //******************************************************************// // Reality check. // //******************************************************************// parameter FFD = 1; // clock to out delay model //******************************************************************// // Figure out how many errors to increment. // //******************************************************************// reg to_incr; reg add_sub_b; always @(cfg_err_cpl_timeout_n or decr_nfl) begin case ({cfg_err_cpl_timeout_n, decr_nfl}) // synthesis full_case parallel_case 2'b10: begin to_incr = 1'b0; add_sub_b = 1'b1; end 2'b11: begin to_incr = 1'b1; add_sub_b = 1'b0; end 2'b00: begin to_incr = 1'b1; add_sub_b = 1'b1; end 2'b01: begin to_incr = 1'b0; add_sub_b = 1'b1; end default: begin to_incr = 1'b0; add_sub_b = 1'b1; end endcase end //******************************************************************// // Register the outputs. // //******************************************************************// reg reg_nfl_num; reg reg_inc_dec_b; always @(posedge clk or posedge rst) begin if (rst) begin reg_nfl_num <= #FFD 1'b0; reg_inc_dec_b <= #FFD 1'b0; end else begin reg_nfl_num <= #FFD to_incr; reg_inc_dec_b <= #FFD add_sub_b; end end assign nfl_num = reg_nfl_num; assign inc_dec_b = reg_inc_dec_b; //******************************************************************// // // //******************************************************************// endmodule
Go to most recent revision | Compare with Previous | Blame | View Log