Subversion Repositories pcie_ds_dma

 
//-----------------------------------------------------------------------------
//
// (c) Copyright 2009-2010 Xilinx, Inc. All rights reserved.
//
// This file contains confidential and proprietary information
// of Xilinx, Inc. and is protected under U.S. and
// international copyright and other intellectual property
// laws.
//
// DISCLAIMER
// This disclaimer is not a license and does not grant any
// rights to the materials distributed herewith. Except as
// otherwise provided in a valid license issued to you by
// Xilinx, and to the maximum extent permitted by applicable
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// (2) Xilinx shall not be liable (whether in contract or tort,
// including negligence, or under any other theory of
// liability) for any loss or damage of any kind or nature
// related to, arising under or in connection with these
// materials, including for any direct, or any indirect,
// special, incidental, or consequential loss or damage
// (including loss of data, profits, goodwill, or any type of
// loss or damage suffered as a result of any action brought
// by a third party) even if such damage or loss was
// reasonably foreseeable or Xilinx had been advised of the
// possibility of the same.
//
// CRITICAL APPLICATIONS
// Xilinx products are not designed or intended to be fail-
// safe, or for use in any application requiring fail-safe
// performance, such as life-support or safety devices or
// systems, Class III medical devices, nuclear facilities,
// applications related to the deployment of airbags, or any
// other applications that could lead to death, personal
// injury, or severe property or environmental damage
// (individually and collectively, "Critical
// Applications"). Customer assumes the sole risk and
// liability of any use of Xilinx products in Critical
// Applications, subject only to applicable laws and
// regulations governing limitations on product liability.
//
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// PART OF THIS FILE AT ALL TIMES.
//
//-----------------------------------------------------------------------------
// Project    : V5-Block Plus for PCI Express
// File       : cmm_errman_nfl.v
//--------------------------------------------------------------------------------
//--------------------------------------------------------------------------------
/***********************************************************************
 
  Description: 
 
  This module figures out what to do for non-fatal errors:
    1) count up or count down,
    2) how much to add or to subtract.
  It returns the number and a add/subtract_b signals to the error 
  tracking counter. The outputs are based on how many errors are 
  asserted by the error reporting modules.
 
***********************************************************************/
 
 
module cmm_errman_nfl (
                nfl_num,                // Output
                inc_dec_b,
                cfg_err_cpl_timeout_n,
                decr_nfl,
                rst,
                clk
                );
 
 
  output        nfl_num;
  output        inc_dec_b;              // 1 = increment, 0 = decrement 
 
  input         cfg_err_cpl_timeout_n;
  input         decr_nfl;
  input         rst;
  input         clk;
 
 
  //******************************************************************//
  // Reality check.                                                   //
  //******************************************************************//
 
  parameter FFD       = 1;        // clock to out delay model
 
 
  //******************************************************************//
  // Figure out how many errors to increment.                         //
  //******************************************************************//
 
  reg           to_incr;
  reg           add_sub_b;
 
  always @(cfg_err_cpl_timeout_n or decr_nfl) begin
    case ({cfg_err_cpl_timeout_n, decr_nfl})    // synthesis full_case parallel_case
    2'b10: begin   to_incr   = 1'b0;
                   add_sub_b = 1'b1;
           end
    2'b11: begin   to_incr   = 1'b1;
                   add_sub_b = 1'b0;
           end
    2'b00: begin   to_incr   = 1'b1;
                   add_sub_b = 1'b1;
           end
    2'b01: begin   to_incr   = 1'b0;
                   add_sub_b = 1'b1;
           end
    default:  begin   to_incr   = 1'b0;
                      add_sub_b = 1'b1;
              end
    endcase
  end
 
 
  //******************************************************************//
  // Register the outputs.                                            //
  //******************************************************************//
 
 
  reg      reg_nfl_num;
  reg      reg_inc_dec_b;
 
  always @(posedge clk or posedge rst)
  begin
    if (rst)
    begin
      reg_nfl_num   <= #FFD 1'b0;
      reg_inc_dec_b <= #FFD 1'b0;
    end
    else
    begin
      reg_nfl_num   <= #FFD to_incr;
      reg_inc_dec_b <= #FFD add_sub_b;
    end
  end
 
  assign nfl_num   = reg_nfl_num;
  assign inc_dec_b = reg_inc_dec_b;
 
 
  //******************************************************************//
  //                                                                  //
  //******************************************************************//
 
endmodule