URL
https://opencores.org/ocsvn/pcie_ds_dma/pcie_ds_dma/trunk
Subversion Repositories pcie_ds_dma
[/] [pcie_ds_dma/] [trunk/] [core/] [ds_dma64/] [pcie_src/] [pcie_core64_m1/] [source_virtex6/] [axi_basic_rx_pipeline.vhd] - Rev 2
Compare with Previous | Blame | View Log
------------------------------------------------------------------------------- -- -- (c) Copyright 2009-2011 Xilinx, Inc. All rights reserved. -- -- This file contains confidential and proprietary information -- of Xilinx, Inc. and is protected under U.S. and -- international copyright and other intellectual property -- laws. -- -- DISCLAIMER -- This disclaimer is not a license and does not grant any -- rights to the materials distributed herewith. Except as -- otherwise provided in a valid license issued to you by -- Xilinx, and to the maximum extent permitted by applicable -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -- (2) Xilinx shall not be liable (whether in contract or tort, -- including negligence, or under any other theory of -- liability) for any loss or damage of any kind or nature -- related to, arising under or in connection with these -- materials, including for any direct, or any indirect, -- special, incidental, or consequential loss or damage -- (including loss of data, profits, goodwill, or any type of -- loss or damage suffered as a result of any action brought -- by a third party) even if such damage or loss was -- reasonably foreseeable or Xilinx had been advised of the -- possibility of the same. -- -- CRITICAL APPLICATIONS -- Xilinx products are not designed or intended to be fail- -- safe, or for use in any application requiring fail-safe -- performance, such as life-support or safety devices or -- systems, Class III medical devices, nuclear facilities, -- applications related to the deployment of airbags, or any -- other applications that could lead to death, personal -- injury, or severe property or environmental damage -- (individually and collectively, "Critical -- Applications"). Customer assumes the sole risk and -- liability of any use of Xilinx products in Critical -- Applications, subject only to applicable laws and -- regulations governing limitations on product liability. -- -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -- PART OF THIS FILE AT ALL TIMES. -- ------------------------------------------------------------------------------- -- Project : Virtex-6 Integrated Block for PCI Express -- File : axi_basic_rx_pipeline.vhd -- Version : 2.3 -- -- Description: -- TRN to AXI RX pipeline. Converts received data from TRN protocol to AXI. -- -- Notes: -- Optional notes section. -- -- Hierarchical: -- axi_basic_top -- axi_basic_rx -- axi_basic_rx_pipeline -- ------------------------------------------------------------------------------- -- Library Declarations -------------------------------------------------------------------------------- LIBRARY ieee; USE ieee.std_logic_1164.all; USE ieee.std_logic_unsigned.all; ENTITY axi_basic_rx_pipeline IS GENERIC ( C_DATA_WIDTH : INTEGER := 128; -- RX/TX interface data width C_FAMILY : STRING := "X7"; -- Targeted FPGA family TCQ : INTEGER := 1; -- Clock to Q time C_REM_WIDTH : INTEGER := 1; -- trem/rrem width C_STRB_WIDTH : INTEGER := 4 -- TSTRB width ); PORT ( -- AXI RX ------------- M_AXIS_RX_TDATA : OUT STD_LOGIC_VECTOR(C_DATA_WIDTH - 1 DOWNTO 0) ; -- RX data to user M_AXIS_RX_TVALID : OUT STD_LOGIC ; -- RX data is valid M_AXIS_RX_TREADY : IN STD_LOGIC ; -- RX ready for data M_AXIS_RX_TSTRB : OUT STD_LOGIC_VECTOR(C_STRB_WIDTH - 1 DOWNTO 0) ; -- RX strobe byte enables M_AXIS_RX_TLAST : OUT STD_LOGIC ; -- RX data is last M_AXIS_RX_TUSER : OUT STD_LOGIC_VECTOR(21 DOWNTO 0) ; -- RX user signals -- TRN RX ------------- TRN_RD : IN STD_LOGIC_VECTOR(C_DATA_WIDTH - 1 DOWNTO 0) ; -- RX data from block TRN_RSOF : IN STD_LOGIC ; -- RX start of packet TRN_REOF : IN STD_LOGIC ; -- RX end of packet TRN_RSRC_RDY : IN STD_LOGIC ; -- RX source ready TRN_RDST_RDY : OUT STD_LOGIC ; -- RX destination ready TRN_RSRC_DSC : IN STD_LOGIC ; -- RX source discontinue TRN_RREM : IN STD_LOGIC_VECTOR(C_REM_WIDTH - 1 DOWNTO 0) ; -- RX remainder TRN_RERRFWD : IN STD_LOGIC ; -- RX error forward TRN_RBAR_HIT : IN STD_LOGIC_VECTOR(6 DOWNTO 0) ; -- RX BAR hit TRN_RECRC_ERR : IN STD_LOGIC ; -- RX ECRC error -- Null Inputs ------------- NULL_RX_TVALID : IN STD_LOGIC ; -- NULL generated tvalid NULL_RX_TLAST : IN STD_LOGIC ; -- NULL generated tlast NULL_RX_TSTRB : IN STD_LOGIC_VECTOR(C_STRB_WIDTH - 1 DOWNTO 0) ; -- NULL generated tstrb NULL_RDST_RDY : IN STD_LOGIC ; -- NULL generated rdst_rdy NULL_IS_EOF : IN STD_LOGIC_VECTOR(4 DOWNTO 0) ; -- NULL generated is_eof -- System ------------- NP_COUNTER : OUT STD_LOGIC_VECTOR(2 DOWNTO 0) ; -- Non-posted counter USER_CLK : IN STD_LOGIC ; -- user clock from block USER_RST : IN STD_LOGIC -- user reset from block ); END axi_basic_rx_pipeline; ARCHITECTURE trans OF axi_basic_rx_pipeline IS SIGNAL is_sof : STD_LOGIC_VECTOR(4 DOWNTO 0); SIGNAL is_sof_prev : STD_LOGIC_VECTOR(4 DOWNTO 0); SIGNAL is_eof : STD_LOGIC_VECTOR(4 DOWNTO 0); SIGNAL is_eof_prev : STD_LOGIC_VECTOR(4 DOWNTO 0); SIGNAL reg_tstrb : STD_LOGIC_VECTOR(C_STRB_WIDTH - 1 DOWNTO 0); SIGNAL tstrb : STD_LOGIC_VECTOR(C_STRB_WIDTH - 1 DOWNTO 0); SIGNAL tstrb_prev : STD_LOGIC_VECTOR(C_STRB_WIDTH - 1 DOWNTO 0); SIGNAL reg_tlast : STD_LOGIC; SIGNAL rsrc_rdy_filtered : STD_LOGIC; SIGNAL trn_rd_DW_swapped : STD_LOGIC_VECTOR(C_DATA_WIDTH - 1 DOWNTO 0); SIGNAL trn_rd_prev : STD_LOGIC_VECTOR(C_DATA_WIDTH - 1 DOWNTO 0); SIGNAL data_hold : STD_LOGIC; SIGNAL data_prev : STD_LOGIC; SIGNAL trn_reof_prev : STD_LOGIC; SIGNAL trn_rrem_prev : STD_LOGIC_VECTOR(C_REM_WIDTH - 1 DOWNTO 0); SIGNAL trn_rsrc_rdy_prev : STD_LOGIC; SIGNAL trn_rsrc_dsc_prev : STD_LOGIC; SIGNAL trn_rsof_prev : STD_LOGIC; SIGNAL trn_rbar_hit_prev : STD_LOGIC_VECTOR(6 DOWNTO 0); SIGNAL trn_rerrfwd_prev : STD_LOGIC; SIGNAL trn_recrc_err_prev : STD_LOGIC; -- Null packet handling signals SIGNAL null_mux_sel : STD_LOGIC; SIGNAL trn_in_packet : STD_LOGIC; SIGNAL dsc_flag : STD_LOGIC; SIGNAL dsc_detect : STD_LOGIC; SIGNAL reg_dsc_detect : STD_LOGIC; SIGNAL trn_rsrc_dsc_d : STD_LOGIC; -- Declare intermediate signals for referenced outputs SIGNAL m_axis_rx_tdata_xhdl0 : STD_LOGIC_VECTOR(C_DATA_WIDTH - 1 DOWNTO 0); SIGNAL m_axis_rx_tvalid_xhdl2 : STD_LOGIC; SIGNAL m_axis_rx_tuser_xhdl1 : STD_LOGIC_VECTOR(21 DOWNTO 0); SIGNAL trn_rdst_rdy_xhdl4 : STD_LOGIC; SIGNAL mrd_lower : STD_LOGIC; SIGNAL mrd_lk_lower : STD_LOGIC; SIGNAL io_rdwr_lower : STD_LOGIC; SIGNAL cfg_rdwr_lower : STD_LOGIC; SIGNAL atomic_lower : STD_LOGIC; SIGNAL np_pkt_lower : STD_LOGIC; SIGNAL mrd_upper : STD_LOGIC; SIGNAL mrd_lk_upper : STD_LOGIC; SIGNAL io_rdwr_upper : STD_LOGIC; SIGNAL cfg_rdwr_upper : STD_LOGIC; SIGNAL atomic_upper : STD_LOGIC; SIGNAL np_pkt_upper : STD_LOGIC; SIGNAL pkt_accepted : STD_LOGIC; SIGNAL reg_np_counter : STD_LOGIC_VECTOR(2 DOWNTO 0); BEGIN -- Drive referenced outputs M_AXIS_RX_TDATA <= m_axis_rx_tdata_xhdl0; M_AXIS_RX_TVALID <= m_axis_rx_tvalid_xhdl2; M_AXIS_RX_TUSER <= m_axis_rx_tuser_xhdl1; TRN_RDST_RDY <= trn_rdst_rdy_xhdl4; -- Create "filtered" version of rsrc_rdy, where discontinued SOFs are removed rsrc_rdy_filtered <= trn_rsrc_rdy AND (trn_in_packet OR (trn_rsof AND NOT trn_rsrc_dsc)); -------------------------------------------------------------------------------- -- Previous value buffer -- -- --------------------- -- -- We are inserting a pipeline stage in between TRN and AXI, which causes -- -- some issues with handshaking signals m_axis_rx_tready/trn_rdst_rdy. The -- -- added cycle of latency in the path causes the user design to fall behind -- -- the TRN interface whenever it throttles. -- -- -- -- To avoid loss of data, we must keep the previous value of all trn_r* -- -- signals in case the user throttles. -- -------------------------------------------------------------------------------- PROCESS (USER_CLK) BEGIN IF (USER_CLK'EVENT AND USER_CLK = '1') THEN IF (USER_RST = '1') THEN trn_rd_prev <= (others => '0')AFTER 1 ps; trn_rsof_prev <= '0' AFTER (TCQ)*1 ps; trn_rrem_prev <= (others => '0') AFTER (TCQ)*1 ps; trn_rsrc_rdy_prev <= '0' AFTER 1 ps; trn_rbar_hit_prev <= (others => '0') AFTER 1 ps; trn_rerrfwd_prev <= '0' AFTER 1 ps; trn_recrc_err_prev <= '0' AFTER 1 ps; trn_reof_prev <= '0' AFTER 1 ps; trn_rsrc_dsc_prev <= '0' AFTER 1 ps; ELSE -- prev buffer works by checking trn_rdst_rdy. When trn_rdst_rdy is -- asserted, a new value is present on the interface. IF (trn_rdst_rdy_xhdl4 = '1') THEN trn_rd_prev <= trn_rd_DW_swapped AFTER (TCQ)*1 ps; trn_rsof_prev <= TRN_RSOF AFTER (TCQ)*1 ps; trn_rrem_prev <= TRN_RREM AFTER (TCQ)*1 ps; trn_rbar_hit_prev <= TRN_RBAR_HIT AFTER (TCQ)*1 ps; trn_rerrfwd_prev <= TRN_RERRFWD AFTER (TCQ)*1 ps; trn_recrc_err_prev <= TRN_RECRC_ERR AFTER (TCQ)*1 ps; trn_rsrc_rdy_prev <= rsrc_rdy_filtered AFTER (TCQ)*1 ps; trn_reof_prev <= trn_reof AFTER (TCQ)*1 ps; trn_rsrc_dsc_prev <= TRN_RSRC_DSC OR dsc_flag AFTER (TCQ)*1 ps; END IF; END IF; END IF; END PROCESS; -------------------------------------------------------------------------------- -- Create TDATA ------------------------------------------------------------------------------ -- Convert TRN data format to AXI data format. AXI is DWORD swapped from TRN -- 128-bit: 64-bit: 32-bit: -- TRN DW0 maps to AXI DW3 TRN DW0 maps to AXI DW1 TNR DW0 maps to AXI DW0 -- TRN DW1 maps to AXI DW2 TRN DW1 maps to AXI DW0 -- TRN DW2 maps to AXI DW1 -- TRN DW3 maps to AXI DW0 xhdl7 : IF (C_DATA_WIDTH = 128) GENERATE trn_rd_DW_swapped <= (TRN_RD(31 DOWNTO 0) & TRN_RD(63 DOWNTO 32) & TRN_RD(95 DOWNTO 64) & TRN_RD(127 DOWNTO 96)); END GENERATE; --xhdl8 : IF (NOT(C_DATA_WIDTH = 128)) GENERATE xhdl9 : IF (C_DATA_WIDTH = 64) GENERATE trn_rd_DW_swapped <= (TRN_RD(31 DOWNTO 0) & TRN_RD(63 DOWNTO 32)); END GENERATE; xhdl10 : IF (NOT(C_DATA_WIDTH = 64) AND NOT(C_DATA_WIDTH = 128)) GENERATE trn_rd_DW_swapped <= TRN_RD; END GENERATE; --END GENERATE; -- Create special buffer which locks in the proper value of TDATA depending -- on whether the user is throttling or not. This buffer has three states: -- -- HOLD state: TDATA maintains its current value -- - the user has throttled the PCIe block -- PREVIOUS state: the buffer provides the previous value on trn_rd -- - the user has finished throttling, and is a little behind -- the PCIe block -- CURRENT state: the buffer passes the current value on trn_rd -- - the user is caught up and ready to receive the latest -- data from the PCIe block PROCESS (USER_CLK) BEGIN IF (USER_CLK'EVENT AND USER_CLK = '1') THEN IF (USER_RST = '1') THEN m_axis_rx_tdata_xhdl0 <= (OTHERS=>'0') AFTER (TCQ)*1 ps; ELSE IF ((NOT(data_hold)) = '1') THEN -- PREVIOUS state IF (data_prev = '1') THEN m_axis_rx_tdata_xhdl0 <= trn_rd_prev AFTER (TCQ)*1 ps; -- CURRENT state ELSE m_axis_rx_tdata_xhdl0 <= trn_rd_DW_swapped AFTER (TCQ)*1 ps; END IF; END IF; -- else HOLD state END IF; END IF; END PROCESS; -- Logic to instruct pipeline to hold its value data_hold <= (NOT(M_AXIS_RX_TREADY) AND m_axis_rx_tvalid_xhdl2); -- Logic to instruct pipeline to use previous bus values. Always use previous value after holding a value. PROCESS (USER_CLK) BEGIN IF (USER_CLK'EVENT AND USER_CLK = '1') THEN IF (USER_RST = '1') THEN data_prev <= '0' AFTER (TCQ)*1 ps; ELSE data_prev <= data_hold AFTER (TCQ)*1 ps; END IF; END IF; END PROCESS; ------------------------------------------------------------------------------ -- Create TVALID, TLAST, TSTRB, TUSER -- ----------------------------------- -- Use the same strategy for these signals as for TDATA, except here we need -- an extra provision for null packets. ------------------------------------------------------------------------------ PROCESS (USER_CLK) BEGIN IF (USER_CLK'EVENT AND USER_CLK = '1') THEN IF (USER_RST = '1') THEN m_axis_rx_tvalid_xhdl2 <= '0' AFTER (TCQ)*1 ps; reg_tlast <= '0' AFTER (TCQ)*1 ps; reg_tstrb <= (others => '1') AFTER (TCQ)*1 ps; m_axis_rx_tuser_xhdl1 <= (others => '0') AFTER (TCQ)*1 ps; ELSE IF (data_hold = '0') THEN -- If in a null packet, use null generated value IF (null_mux_sel = '1') THEN m_axis_rx_tvalid_xhdl2 <= NULL_RX_TVALID AFTER (TCQ)*1 ps; reg_tlast <= NULL_RX_TLAST AFTER (TCQ)*1 ps; reg_tstrb <= NULL_RX_TSTRB AFTER (TCQ)*1 ps; m_axis_rx_tuser_xhdl1 <= (NULL_IS_EOF & "00000000000000000") AFTER (TCQ)*1 ps; -- PREVIOUS state ELSIF (data_prev = '1') THEN m_axis_rx_tvalid_xhdl2 <= (trn_rsrc_rdy_prev OR dsc_flag) AFTER (TCQ)*1 ps; reg_tlast <= trn_reof_prev AFTER (TCQ)*1 ps; reg_tstrb <= tstrb_prev AFTER (TCQ)*1 ps; m_axis_rx_tuser_xhdl1 <= (is_eof_prev & "00" & is_sof_prev & '0' & trn_rbar_hit_prev & trn_rerrfwd_prev & trn_recrc_err_prev) AFTER (TCQ)*1 ps; -- TUSER bits [21:17] & TUSER bits [16:15] & TUSER bits [14:10] & TUSER bits [9] & TUSER bits [8:2] & TUSER bit [1] & TUSER bit [0] -- CURRENT state ELSE m_axis_rx_tvalid_xhdl2 <= (rsrc_rdy_filtered OR dsc_flag) AFTER (TCQ)*1 ps; reg_tlast <= TRN_REOF AFTER (TCQ)*1 ps; reg_tstrb <= tstrb AFTER (TCQ)*1 ps; m_axis_rx_tuser_xhdl1 <= (is_eof & "00" & is_sof & '0' & trn_rbar_hit & TRN_RERRFWD & TRN_RECRC_ERR) AFTER (TCQ)*1 ps; -- TUSER bits [21:17] & TUSER bits [16:15] & TUSER bits [14:10] & TUSER bits [9] & TUSER bits [8:2] & TUSER bit [1] & TUSER bit [0] END IF; END IF; -- else HOLD state END IF; END IF; END PROCESS; -- Hook up TLAST and TSTRB depending on interface width xhdl11 : IF (C_DATA_WIDTH = 128) GENERATE -- For 128-bit interface, don't pass TLAST and TSTRB to user (is_eof and is_data passed to user instead). reg_tlast is still used internally. M_AXIS_RX_TLAST <= '0'; M_AXIS_RX_TSTRB <= (others => '1'); END GENERATE; -- For 64/32-bit interface, pass TLAST to user. xhdl12 : IF (NOT(C_DATA_WIDTH = 128)) GENERATE M_AXIS_RX_TLAST <= reg_tlast; M_AXIS_RX_TSTRB <= reg_tstrb; END GENERATE; -------------------------------------------------------------------------------- -- Create TSTRB --- -- ------------ --- -- Convert RREM to STRB. Here, we are converting the encoding method for the --- -- location of the EOF from TRN flavor (rrem) to AXI (TSTRB). --- -- --- -- NOTE: for each configuration, we need two values of TSTRB, the current and--- -- previous values. The need for these two values is described below. --- -------------------------------------------------------------------------------- xhdl13 : IF (C_DATA_WIDTH = 128) GENERATE -- TLAST and TSTRB not used in 128-bit interface. is_sof and is_eof used instead. tstrb <= x"0000"; tstrb_prev <= x"0000"; END GENERATE; xhdl14 : IF (C_DATA_WIDTH /= 128) GENERATE xhdl15 : IF (C_DATA_WIDTH = 64) GENERATE -- 64-bit interface: contains 2 DWORDs per cycle, for a total of 8 bytes -- TSTRB has only two possible values here, 0xFF or 0x0F tstrb <= x"FF" WHEN (TRN_RREM = "11") ELSE x"0F"; tstrb_prev <= x"FF" WHEN (trn_rrem_prev = "11" ) ELSE x"0F"; END GENERATE; xhdl16 : IF (C_DATA_WIDTH /= 64) GENERATE -- 32-bit interface: contains 1 DWORD per cycle, for a total of 4 bytes -- TSTRB is always 0xF in this case, due to the nature of the PCIe block tstrb <= "1111"; tstrb_prev <= "1111"; END GENERATE; END GENERATE; ------------------------------------------------------------------------------// -- Create is_sof // -- ------------- // -- is_sof is a signal to the user indicating the location of SOF in TDATA . // -- Due to inherent 64-bit alignment of packets from the block, the only // -- possible values are: // -- Value Valid data widths // -- 5'b11000 (sof @ byte 8) 128 // -- 5'b10000 (sof @ byte 0) 128, 64, 32 // -- 5'b00000 (sof not present) 128, 64, 32 // ------------------------------------------------------------------------------// xhdl17 : IF (C_DATA_WIDTH = 128) GENERATE is_sof <= (((NOT(TRN_RSRC_DSC)) AND TRN_RSOF) & ((NOT(TRN_RREM(1))) AND TRN_RSOF ) & "000"); is_sof_prev <= (((trn_rsof_prev AND (NOT(trn_rsrc_dsc_prev)))) & (trn_rsof_prev AND (NOT(trn_rrem_prev(1)))) & "000"); -- bit 4: enable bit 3: sof @ byte 8? bit 2-0: hardwired 0 END GENERATE; xhdl18 : IF (NOT(C_DATA_WIDTH = 128)) GENERATE is_sof <= ((TRN_RSOF AND (NOT TRN_RSRC_DSC)) & "0000"); -- bit 4: enable, bits 3-0: hardwired 0 is_sof_prev <= ((trn_rsof_prev AND (NOT trn_rsrc_dsc_prev)) & "0000"); END GENERATE; ------------------------------------------------------------------------------// -- Create is_eof // -- ------------- // -- is_eof is a signal to the user indicating the location of EOF in TDATA . // -- Due to DWORD granularity of packets from the block, the only // -- possible values are: // -- Value Valid data widths // -- 5'b11111 (eof @ byte 15) 128 // -- 5'b11011 (eof @ byte 11) 128 // -- 5'b10111 (eof @ byte 7) 128, 64 // -- 5'b10011 (eof @ byte 3)` 128, 64, 32 // -- 5'b00011 (eof not present) 128, 64, 32 // ------------------------------------------------------------------------------// xhdl19 : IF (C_DATA_WIDTH = 128) GENERATE is_eof <= (TRN_REOF & TRN_RREM & "11"); is_eof_prev <= (trn_reof_prev & trn_rrem_prev & "11"); -- bit 4: enable bit 3-2: encoded eof loc from block bit 1-0: hardwired 1 END GENERATE; xhdl20 : IF (C_DATA_WIDTH = 64) GENERATE is_eof <= (TRN_REOF & '0' & TRN_RREM & "11"); is_eof_prev <= (trn_reof_prev & '0' & trn_rrem_prev & "11"); -- bit 4: enable, bit 3: hardwired 0, bit 2: encoded eof loc from block, bit 1-0: hardwired 1 END GENERATE; -------------------------------------------------------------------------------- xhdl20A : IF (C_DATA_WIDTH = 32) GENERATE is_eof <= (TRN_REOF & "0011"); is_eof_prev <= (trn_reof_prev & "0011"); -- bit 4: enable, bit 3: hardwired 0, bit 2: encoded eof loc from block, bit 1-0: hardwired 1 END GENERATE; -- Create trn_rdst_rdy -- -------------------------------------------------------------------------------- PROCESS (USER_CLK) BEGIN IF (USER_CLK'EVENT AND USER_CLK = '1') THEN IF (USER_RST = '1') THEN trn_rdst_rdy_xhdl4 <= '0' AFTER (TCQ)*1 ps; ELSE -- If in a null packet, use null generated value IF (null_mux_sel = '1' AND M_AXIS_RX_TREADY = '1') THEN trn_rdst_rdy_xhdl4 <= NULL_RDST_RDY AFTER (TCQ)*1 ps; -- If a discontinue needs to be serviced, throttle the block until we are -- ready to pad out the packet ELSIF (dsc_flag = '1') THEN trn_rdst_rdy_xhdl4 <= '0' AFTER (TCQ)*1 ps; -- If in a packet, pass user back-pressure directly to block ELSIF (m_axis_rx_tvalid_xhdl2 = '1') THEN trn_rdst_rdy_xhdl4 <= M_AXIS_RX_TREADY AFTER (TCQ)*1 ps; -- If idle, default to no back-pressure. We need to default to the -- "ready to accept data" state to make sure we catch the first -- clock of data of a new packet. ELSE trn_rdst_rdy_xhdl4 <= '1' AFTER (TCQ)*1 ps; END IF; END IF; END IF; END PROCESS; ------------------------------------------------------------------------------// -- Create null_mux_sel // -- null_mux_sel is the signal used to detect a discontinue situation and // -- mux in the null packet generated in rx_null_gen. Only mux in null data // -- when not at the beginningof a packet. SOF discontinues do not require // -- padding, as the whole packet is simply squashed instead. // ------------------------------------------------------------------------------// PROCESS (USER_CLK) BEGIN IF (USER_CLK'EVENT AND USER_CLK = '1') THEN IF (USER_RST = '1') THEN null_mux_sel <= '0' AFTER (TCQ)*1 ps; ELSE -- NULL packet done IF (null_mux_sel = '1' AND NULL_RX_TLAST = '1' AND M_AXIS_RX_TREADY = '1') THEN null_mux_sel <= '0' AFTER (TCQ)*1 ps; -- Discontinue detected and we're in packet, so switch to NULL packet ELSIF (dsc_flag = '1' AND data_hold = '0') THEN null_mux_sel <= '1' AFTER (TCQ)*1 ps; END IF; END IF; END IF; END PROCESS; ------------------------------------------------------------------------------// -- Create discontinue tracking signals // ------------------------------------------------------------------------------// -- Create signal trn_in_packet, which is needed to validate trn_rsrc_dsc. We -- should ignore trn_rsrc_dsc when it's asserted out-of-packet. PROCESS (USER_CLK) BEGIN IF (USER_CLK'EVENT AND USER_CLK = '1') THEN IF (USER_RST = '1') THEN trn_in_packet <= '0' AFTER (TCQ)*1 ps; ELSE IF ((TRN_RSOF = '1') AND (NOT(TRN_REOF = '1')) AND rsrc_rdy_filtered = '1' AND trn_rdst_rdy_xhdl4 = '1') THEN trn_in_packet <= '1' AFTER (TCQ)*1 ps; ELSIF (TRN_RSRC_DSC = '1') THEN trn_in_packet <= '0' AFTER (TCQ)*1 ps; ELSIF (TRN_REOF= '1' AND (NOT(TRN_RSOF= '1')) AND TRN_RSRC_RDY = '1' AND trn_rdst_rdy_xhdl4 = '1') THEN trn_in_packet <= '0'; END IF; END IF; END IF; END PROCESS; -- Create dsc_flag, which identifies and stores mid-packet discontinues that -- require null packet padding. This signal is edge sensitive to trn_rsrc_dsc, -- to make sure we don't service the same dsc twice in the event that -- trn_rsrc_dsc stays asserted for longer than it takes to pad out the packet. dsc_detect <= TRN_RSRC_DSC and (not(trn_rsrc_dsc_d)) and trn_in_packet and ((not(TRN_RSOF)) or TRN_REOF) and (not(trn_rdst_rdy_xhdl4 and TRN_REOF)); PROCESS (USER_CLK,USER_RST) BEGIN IF (USER_CLk'EVENT AND USER_CLK = '1') THEN IF (USER_RST = '1') THEN reg_dsc_detect <= '0' AFTER (TCQ)*1 ps; trn_rsrc_dsc_d <= '0' AFTER (TCQ)*1 ps; ELSE IF (dsc_detect = '1') THEN reg_dsc_detect <= '1' AFTER (TCQ)*1 ps; ELSIF (null_mux_sel = '1') THEN reg_dsc_detect <= '0' AFTER (TCQ)*1 ps; END IF; trn_rsrc_dsc_d <= TRN_RSRC_DSC AFTER (TCQ)*1 ps; END IF; END IF; END PROCESS; dsc_flag <= dsc_detect OR reg_dsc_detect; -------------------------------------------------------------------------------- -- Create np_counter (V6 128-bit only). This counter tells the V6 128-bit -- -- interface core how many NP packets have left the RX pipeline. The V6 -- -- 128-bit interface uses this count to perform rnp_ok modulation. -- -------------------------------------------------------------------------------- xhdl21 : IF ((C_FAMILY = "V6") AND (C_DATA_WIDTH = 128)) GENERATE -- Look for NP packets beginning on lower (i.e. unaligned) start mrd_lower <= '1' WHEN (m_axis_rx_tdata_xhdl0(92 DOWNTO 88) = "00000" AND m_axis_rx_tdata_xhdl0(94) = '0') ELSE '0'; mrd_lk_lower <= '1' WHEN (m_axis_rx_tdata_xhdl0(92 DOWNTO 88) = "00001") ELSE '0'; io_rdwr_lower <= '1' WHEN (m_axis_rx_tdata_xhdl0(92 DOWNTO 88) = "00010") ELSE '0'; cfg_rdwr_lower <= '1' WHEN (m_axis_rx_tdata_xhdl0(92 DOWNTO 89) = "0010") ELSE '0'; atomic_lower <= '1' WHEN (m_axis_rx_tdata_xhdl0(91 DOWNTO 90) = "11" AND m_axis_rx_tdata_xhdl0(94) = '1') ELSE '0'; np_pkt_lower <= '1' WHEN ((mrd_lower = '1' OR mrd_lk_lower = '1' OR io_rdwr_lower = '1' OR cfg_rdwr_lower = '1' OR atomic_lower = '1') AND m_axis_rx_tuser_xhdl1(13) = '1') ELSE '0'; -- Look for NP packets beginning on upper (i.e. aligned) start mrd_upper <= '1' WHEN (m_axis_rx_tdata_xhdl0(28 DOWNTO 24) = "00000" AND m_axis_rx_tdata_xhdl0(30) = '0') ELSE '0'; mrd_lk_upper <= '1' WHEN (m_axis_rx_tdata_xhdl0(28 DOWNTO 24) = "00001") ELSE '0'; io_rdwr_upper <= '1' WHEN (m_axis_rx_tdata_xhdl0(28 DOWNTO 24) = "00010") ELSE '0'; cfg_rdwr_upper <= '1' WHEN (m_axis_rx_tdata_xhdl0(28 DOWNTO 25) = "0010") ELSE '0'; atomic_upper <= '1' WHEN (m_axis_rx_tdata_xhdl0(27 DOWNTO 26) = "11" AND m_axis_rx_tdata_xhdl0(30) = '1') ELSE '0'; np_pkt_upper <= '1' WHEN ((mrd_upper = '1' OR mrd_lk_upper = '1' OR io_rdwr_upper = '1' OR cfg_rdwr_upper = '1' OR atomic_upper = '1') AND m_axis_rx_tuser_xhdl1(13) = '0') ELSE '0'; pkt_accepted <= '1' WHEN (m_axis_rx_tuser_xhdl1(14) = '1' AND M_AXIS_RX_TREADY = '1' AND m_axis_rx_tvalid_xhdl2 = '1') ELSE '0'; -- Increment counter whenever an NP packet leaves the RX pipeline PROCESS (USER_CLK) BEGIN IF (USER_CLK'EVENT AND USER_CLK = '1') THEN IF (USER_RST = '1') THEN reg_np_counter <= "000" AFTER (TCQ)*1 ps; ELSE IF ((np_pkt_lower = '1' OR np_pkt_upper = '1') AND pkt_accepted = '1') THEN reg_np_counter <= reg_np_counter + "001" AFTER (TCQ)*1 ps; END IF; END IF; END IF; END PROCESS; NP_COUNTER <= reg_np_counter; END GENERATE; xhdl22 : IF (NOT(C_FAMILY = "V6" AND C_DATA_WIDTH = 128)) GENERATE NP_COUNTER <= "000"; END GENERATE; END trans;