URL
https://opencores.org/ocsvn/pcie_ds_dma/pcie_ds_dma/trunk
Subversion Repositories pcie_ds_dma
[/] [pcie_ds_dma/] [trunk/] [core/] [ds_dma64/] [pcie_src/] [pcie_core64_m1/] [source_virtex6/] [pcie_bram_top_v6.vhd] - Rev 15
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------- -- -- (c) Copyright 2009-2011 Xilinx, Inc. All rights reserved. -- -- This file contains confidential and proprietary information -- of Xilinx, Inc. and is protected under U.S. and -- international copyright and other intellectual property -- laws. -- -- DISCLAIMER -- This disclaimer is not a license and does not grant any -- rights to the materials distributed herewith. Except as -- otherwise provided in a valid license issued to you by -- Xilinx, and to the maximum extent permitted by applicable -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -- (2) Xilinx shall not be liable (whether in contract or tort, -- including negligence, or under any other theory of -- liability) for any loss or damage of any kind or nature -- related to, arising under or in connection with these -- materials, including for any direct, or any indirect, -- special, incidental, or consequential loss or damage -- (including loss of data, profits, goodwill, or any type of -- loss or damage suffered as a result of any action brought -- by a third party) even if such damage or loss was -- reasonably foreseeable or Xilinx had been advised of the -- possibility of the same. -- -- CRITICAL APPLICATIONS -- Xilinx products are not designed or intended to be fail- -- safe, or for use in any application requiring fail-safe -- performance, such as life-support or safety devices or -- systems, Class III medical devices, nuclear facilities, -- applications related to the deployment of airbags, or any -- other applications that could lead to death, personal -- injury, or severe property or environmental damage -- (individually and collectively, "Critical -- Applications"). Customer assumes the sole risk and -- liability of any use of Xilinx products in Critical -- Applications, subject only to applicable laws and -- regulations governing limitations on product liability. -- -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -- PART OF THIS FILE AT ALL TIMES. -- ------------------------------------------------------------------------------- -- Project : Virtex-6 Integrated Block for PCI Express -- File : pcie_bram_top_v6.vhd -- Version : 2.3 ---- Description: BlockRAM top level module for Virtex6 PCIe Block ---- ---- ---- ---------------------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; entity pcie_bram_top_v6 is generic ( DEV_CAP_MAX_PAYLOAD_SUPPORTED : integer := 0; VC0_TX_LASTPACKET : integer := 31; TLM_TX_OVERHEAD : integer := 24; TL_TX_RAM_RADDR_LATENCY : integer := 1; TL_TX_RAM_RDATA_LATENCY : integer := 2; TL_TX_RAM_WRITE_LATENCY : integer := 1; VC0_RX_LIMIT : bit_vector := x"1FFF"; TL_RX_RAM_RADDR_LATENCY : integer := 1; TL_RX_RAM_RDATA_LATENCY : integer := 2; TL_RX_RAM_WRITE_LATENCY : integer := 1 ); port ( user_clk_i : in std_logic; reset_i : in std_logic; mim_tx_wen : in std_logic; mim_tx_waddr : in std_logic_vector(12 downto 0); mim_tx_wdata : in std_logic_vector(71 downto 0); mim_tx_ren : in std_logic; mim_tx_rce : in std_logic; mim_tx_raddr : in std_logic_vector(12 downto 0); mim_tx_rdata : out std_logic_vector(71 downto 0); mim_rx_wen : in std_logic; mim_rx_waddr : in std_logic_vector(12 downto 0); mim_rx_wdata : in std_logic_vector(71 downto 0); mim_rx_ren : in std_logic; mim_rx_rce : in std_logic; mim_rx_raddr : in std_logic_vector(12 downto 0); mim_rx_rdata : out std_logic_vector(71 downto 0) ); end pcie_bram_top_v6; architecture v6_pcie of pcie_bram_top_v6 is component pcie_brams_v6 generic ( NUM_BRAMS : integer; RAM_RADDR_LATENCY : integer; RAM_RDATA_LATENCY : integer; RAM_WRITE_LATENCY : integer); port ( user_clk_i : in std_logic; reset_i : in std_logic; wen : in std_logic; waddr : in std_logic_vector(12 downto 0); wdata : in std_logic_vector(71 downto 0); ren : in std_logic; rce : in std_logic; raddr : in std_logic_vector(12 downto 0); rdata : out std_logic_vector(71 downto 0)); end component; -- TX calculations function cols_tx ( constant CMPS : integer; constant VC0_TX_LASTPACKET : integer; constant TLM_TX_OVERHEAD : integer) return integer is variable MPS_BYTES : integer := 128; variable BYTES_TX : integer := 0; variable COLS_TX : integer := 1; begin -- cols_tx if (cmps = 0) then MPS_BYTES := 128; elsif (cmps = 1) then MPS_BYTES := 256; elsif (cmps = 2) then MPS_BYTES := 512; else MPS_BYTES := 1024; end if; BYTES_TX := ((VC0_TX_LASTPACKET + 1) * (MPS_BYTES + TLM_TX_OVERHEAD)); if (BYTES_TX <= 4096) then COLS_TX := 1; elsif (BYTES_TX <= 8192) then COLS_TX := 2; elsif (BYTES_TX <= 16384) then COLS_TX := 4; elsif (BYTES_TX <= 32768) then COLS_TX := 8; else COLS_TX := 18; end if; return COLS_TX; end cols_tx; FUNCTION to_integer ( val_in : bit_vector) RETURN integer IS CONSTANT vctr : bit_vector(val_in'high-val_in'low DOWNTO 0) := val_in; VARIABLE ret : integer := 0; BEGIN FOR index IN vctr'RANGE LOOP IF (vctr(index) = '1') THEN ret := ret + (2**index); END IF; END LOOP; RETURN(ret); END to_integer; -- RX calculations function cols_rx ( constant VC0_RX_LIMIT : integer) return integer is variable COLS_RX : integer := 1; begin -- cols_rx if (VC0_RX_LIMIT < 512) then -- X"0200" COLS_RX := 1; elsif (VC0_RX_LIMIT < 1024) then -- X"0400" COLS_RX := 2; elsif (VC0_RX_LIMIT < 2048) then -- X"0800" COLS_RX := 4; elsif (VC0_RX_LIMIT < 4096) then -- X"1000" COLS_RX := 8; else COLS_RX := 18; end if; return COLS_RX; end cols_rx; constant ROWS_TX : integer := 1; constant ROWS_RX : integer := 1; -- Declare intermediate signals for referenced outputs signal mim_tx_rdata_v6pcie1 : std_logic_vector(71 downto 0); signal mim_rx_rdata_v6pcie0 : std_logic_vector(71 downto 0); begin -- Drive referenced outputs mim_tx_rdata <= mim_tx_rdata_v6pcie1; mim_rx_rdata <= mim_rx_rdata_v6pcie0; -- process -- begin -- -- $display("[%t] %m ROWS_TX %0d COLS_TX %0d", now, to_stdlogic(ROWS_TX), to_stdlogicvector(COLS_TX, 13)); -- -- $display("[%t] %m ROWS_RX %0d COLS_RX %0d", now, to_stdlogic(ROWS_RX), to_stdlogicvector(COLS_RX, 13)); -- wait; -- end process; pcie_brams_tx : pcie_brams_v6 generic map ( NUM_BRAMS => cols_tx(DEV_CAP_MAX_PAYLOAD_SUPPORTED, VC0_TX_LASTPACKET, TLM_TX_OVERHEAD), RAM_RADDR_LATENCY => TL_TX_RAM_RADDR_LATENCY, RAM_RDATA_LATENCY => TL_TX_RAM_RDATA_LATENCY, RAM_WRITE_LATENCY => TL_TX_RAM_WRITE_LATENCY ) port map ( user_clk_i => user_clk_i, reset_i => reset_i, waddr => mim_tx_waddr, wen => mim_tx_wen, ren => mim_tx_ren, rce => mim_tx_rce, wdata => mim_tx_wdata, raddr => mim_tx_raddr, rdata => mim_tx_rdata_v6pcie1 ); pcie_brams_rx : pcie_brams_v6 generic map ( NUM_BRAMS => cols_rx(to_integer(VC0_RX_LIMIT)), RAM_RADDR_LATENCY => TL_RX_RAM_RADDR_LATENCY, RAM_RDATA_LATENCY => TL_RX_RAM_RDATA_LATENCY, RAM_WRITE_LATENCY => TL_RX_RAM_WRITE_LATENCY ) port map ( user_clk_i => user_clk_i, reset_i => reset_i, waddr => mim_rx_waddr, wen => mim_rx_wen, ren => mim_rx_ren, rce => mim_rx_rce, wdata => mim_rx_wdata, raddr => mim_rx_raddr, rdata => mim_rx_rdata_v6pcie0 ); end v6_pcie; -- pcie_bram_top
Go to most recent revision | Compare with Previous | Blame | View Log