URL
https://opencores.org/ocsvn/pcie_ds_dma/pcie_ds_dma/trunk
Subversion Repositories pcie_ds_dma
[/] [pcie_ds_dma/] [trunk/] [core/] [wishbone/] [cross/] [wb_conmax_msel.v] - Rev 44
Go to most recent revision | Compare with Previous | Blame | View Log
///////////////////////////////////////////////////////////////////// //// //// //// WISHBONE Connection Matrix Master Select //// //// //// //// //// //// Author: Rudolf Usselmann //// //// rudi@asics.ws //// //// //// //// //// //// Downloaded from: http://www.opencores.org/cores/wb_conmax/ //// //// //// ///////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000-2002 Rudolf Usselmann //// //// www.asics.ws //// //// rudi@asics.ws //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer.//// //// //// //// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY //// //// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED //// //// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS //// //// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR //// //// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, //// //// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES //// //// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE //// //// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR //// //// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF //// //// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT //// //// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT //// //// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE //// //// POSSIBILITY OF SUCH DAMAGE. //// //// //// ///////////////////////////////////////////////////////////////////// // CVS Log // // $Id: wb_conmax_msel.v,v 1.2 2002-10-03 05:40:07 rudi Exp $ // // $Date: 2002-10-03 05:40:07 $ // $Revision: 1.2 $ // $Author: rudi $ // $Locker: $ // $State: Exp $ // // Change History: // $Log: not supported by cvs2svn $ // Revision 1.1.1.1 2001/10/19 11:01:38 rudi // WISHBONE CONMAX IP Core // // // // // //`include "wb_conmax_defines.v" `timescale 1ns / 10ps module wb_conmax_msel( clk_i, rst_i, conf, req, sel, next ); //////////////////////////////////////////////////////////////////// // // Module Parameters // parameter [1:0] pri_sel = 2'd0; //////////////////////////////////////////////////////////////////// // // Module IOs // input clk_i, rst_i; input [15:0] conf; input [7:0] req; output [2:0] sel; input next; //////////////////////////////////////////////////////////////////// // // Local Wires // wire [1:0] pri0, pri1, pri2, pri3; wire [1:0] pri4, pri5, pri6, pri7; wire [1:0] pri_out_d; reg [1:0] pri_out; wire [7:0] req_p0, req_p1, req_p2, req_p3; wire [2:0] gnt_p0, gnt_p1, gnt_p2, gnt_p3; reg [2:0] sel1, sel2; wire [2:0] sel; //////////////////////////////////////////////////////////////////// // // Priority Select logic // assign pri0[0] = (pri_sel == 2'd0) ? 1'b0 : conf[0]; assign pri0[1] = (pri_sel == 2'd2) ? conf[1] : 1'b0; assign pri1[0] = (pri_sel == 2'd0) ? 1'b0 : conf[2]; assign pri1[1] = (pri_sel == 2'd2) ? conf[3] : 1'b0; assign pri2[0] = (pri_sel == 2'd0) ? 1'b0 : conf[4]; assign pri2[1] = (pri_sel == 2'd2) ? conf[5] : 1'b0; assign pri3[0] = (pri_sel == 2'd0) ? 1'b0 : conf[6]; assign pri3[1] = (pri_sel == 2'd2) ? conf[7] : 1'b0; assign pri4[0] = (pri_sel == 2'd0) ? 1'b0 : conf[8]; assign pri4[1] = (pri_sel == 2'd2) ? conf[9] : 1'b0; assign pri5[0] = (pri_sel == 2'd0) ? 1'b0 : conf[10]; assign pri5[1] = (pri_sel == 2'd2) ? conf[11] : 1'b0; assign pri6[0] = (pri_sel == 2'd0) ? 1'b0 : conf[12]; assign pri6[1] = (pri_sel == 2'd2) ? conf[13] : 1'b0; assign pri7[0] = (pri_sel == 2'd0) ? 1'b0 : conf[14]; assign pri7[1] = (pri_sel == 2'd2) ? conf[15] : 1'b0; // Priority Encoder wb_conmax_pri_enc #(pri_sel) pri_enc( .valid( req ), .pri0( pri0 ), .pri1( pri1 ), .pri2( pri2 ), .pri3( pri3 ), .pri4( pri4 ), .pri5( pri5 ), .pri6( pri6 ), .pri7( pri7 ), .pri_out( pri_out_d ) ); always @(posedge clk_i) if(rst_i) pri_out <= #1 2'h0; else if(next) pri_out <= #1 pri_out_d; //////////////////////////////////////////////////////////////////// // // Arbiters // assign req_p0[0] = req[0] & (pri0 == 2'd0); assign req_p0[1] = req[1] & (pri1 == 2'd0); assign req_p0[2] = req[2] & (pri2 == 2'd0); assign req_p0[3] = req[3] & (pri3 == 2'd0); assign req_p0[4] = req[4] & (pri4 == 2'd0); assign req_p0[5] = req[5] & (pri5 == 2'd0); assign req_p0[6] = req[6] & (pri6 == 2'd0); assign req_p0[7] = req[7] & (pri7 == 2'd0); assign req_p1[0] = req[0] & (pri0 == 2'd1); assign req_p1[1] = req[1] & (pri1 == 2'd1); assign req_p1[2] = req[2] & (pri2 == 2'd1); assign req_p1[3] = req[3] & (pri3 == 2'd1); assign req_p1[4] = req[4] & (pri4 == 2'd1); assign req_p1[5] = req[5] & (pri5 == 2'd1); assign req_p1[6] = req[6] & (pri6 == 2'd1); assign req_p1[7] = req[7] & (pri7 == 2'd1); assign req_p2[0] = req[0] & (pri0 == 2'd2); assign req_p2[1] = req[1] & (pri1 == 2'd2); assign req_p2[2] = req[2] & (pri2 == 2'd2); assign req_p2[3] = req[3] & (pri3 == 2'd2); assign req_p2[4] = req[4] & (pri4 == 2'd2); assign req_p2[5] = req[5] & (pri5 == 2'd2); assign req_p2[6] = req[6] & (pri6 == 2'd2); assign req_p2[7] = req[7] & (pri7 == 2'd2); assign req_p3[0] = req[0] & (pri0 == 2'd3); assign req_p3[1] = req[1] & (pri1 == 2'd3); assign req_p3[2] = req[2] & (pri2 == 2'd3); assign req_p3[3] = req[3] & (pri3 == 2'd3); assign req_p3[4] = req[4] & (pri4 == 2'd3); assign req_p3[5] = req[5] & (pri5 == 2'd3); assign req_p3[6] = req[6] & (pri6 == 2'd3); assign req_p3[7] = req[7] & (pri7 == 2'd3); wb_conmax_arb arb0( .clk( clk_i ), .rst( rst_i ), .req( req_p0 ), .gnt( gnt_p0 ), .next( 1'b0 ) ); wb_conmax_arb arb1( .clk( clk_i ), .rst( rst_i ), .req( req_p1 ), .gnt( gnt_p1 ), .next( 1'b0 ) ); wb_conmax_arb arb2( .clk( clk_i ), .rst( rst_i ), .req( req_p2 ), .gnt( gnt_p2 ), .next( 1'b0 ) ); wb_conmax_arb arb3( .clk( clk_i ), .rst( rst_i ), .req( req_p3 ), .gnt( gnt_p3 ), .next( 1'b0 ) ); //////////////////////////////////////////////////////////////////// // // Final Master Select // always @(pri_out or gnt_p0 or gnt_p1) if(pri_out[0]) sel1 = gnt_p1; else sel1 = gnt_p0; always @(pri_out or gnt_p0 or gnt_p1 or gnt_p2 or gnt_p3) case(pri_out) 2'd0: sel2 = gnt_p0; 2'd1: sel2 = gnt_p1; 2'd2: sel2 = gnt_p2; 2'd3: sel2 = gnt_p3; endcase assign sel = (pri_sel==2'd0) ? gnt_p0 : ( (pri_sel==2'd1) ? sel1 : sel2 ); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log