URL
https://opencores.org/ocsvn/pcie_ds_dma/pcie_ds_dma/trunk
Subversion Repositories pcie_ds_dma
[/] [pcie_ds_dma/] [trunk/] [projects/] [ac701_a200t_core/] [src/] [testbench/] [test_pkg.vhd] - Rev 56
Go to most recent revision | Compare with Previous | Blame | View Log
--------------------------------------------------------------------------------------------------- -- -- Title : test_pkg.vhd -- Author : Dmitry Smekhov -- Company : Instrumental System -- -- Version : 1.0 -- --------------------------------------------------------------------------------------------------- -- -- Description : Пакет для тестирования ambpex5. -- --------------------------------------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_arith.all; use ieee.std_logic_unsigned.all; use ieee.std_logic_textio.all; use std.textio.all; library work; use work.cmd_sim_pkg.all; use work.block_pkg.all; use work.trd_pkg.all; package test_pkg is --! Инициализация теста procedure test_init( fname: in string --! имя файла отчёта ); --! Завершение теста procedure test_close; --! Запуск DMA с неправильным дескриптором procedure test_dsc_incorrect ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ); --! Запуск DMA на приём одного блока 4 кБ procedure test_read_4kb ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ); --! Чтение 8 кБ из тетрады DIO_IN procedure test_adm_read_8kb ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ); --! Проверка обращений к блоку MAIN procedure test_block_main ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ); --! Чтение 16 кБ с использованием двух блоков дескрипторов procedure test_adm_read_16kb ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ); --! Запись 16 кБ с использованием двух блоков дескрипторов procedure test_adm_write_16kb ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ); end package test_pkg; package body test_pkg is FILE log: text; shared variable cnt_ok, cnt_error: integer; -- Инициализация теста procedure test_init( fname: in string -- имя файла отчёта ) is begin file_open( log, fname, WRITE_MODE ); cnt_ok:=0; cnt_error:=0; end test_init; -- Завершение теста procedure test_close is variable str : LINE; -- pointer to string begin std.textio.write( str, string'(" " )); writeline( log, str ); writeline( log, str ); write( str, string'("Проверка завершена" )); writeline( log, str ); write( str, string'("Число успешных тестов: " )); write( str, cnt_ok ); writeline( log, str ); write( str, string'("Число ошибочных тестов: " )); write( str, cnt_error ); writeline( log, str ); file_close( log ); end test_close; --! Запуск DMA с неправильным дескриптором procedure test_dsc_incorrect ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ) is variable adr : std_logic_vector( 31 downto 0 ); variable data : std_logic_vector( 31 downto 0 ); variable str : line; variable error : integer:=0; begin write( str, string'("TEST_DSC_INCORRECT" )); writeline( log, str ); ---- Формирование блока дескрипторов --- for ii in 0 to 127 loop adr:= x"00100000"; adr:=adr + ii*4; int_mem_write( cmd, ret, adr, x"00000000" ); end loop; int_mem_write( cmd, ret, x"00100000", x"03020100" ); int_mem_write( cmd, ret, x"001001FC", x"FF00AA00" ); ---- Программирование канала DMA ---- block_write( cmd, ret, 4, 8, x"00000027" ); -- DMA_MODE block_write( cmd, ret, 4, 9, x"00000010" ); -- DMA_CTRL - RESET FIFO block_write( cmd, ret, 4, 20, x"00100000" ); -- PCI_ADRL block_write( cmd, ret, 4, 21, x"00100000" ); -- PCI_ADRH block_write( cmd, ret, 4, 23, x"0000A400" ); -- LOCAL_ADR block_write( cmd, ret, 4, 9, x"00000001" ); -- DMA_CTRL - START wait for 10 us; block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data( 15 downto 0 )=x"A021" ) then write( str, string'(" - Ok" )); else write( str, string'(" - Error" )); error:=error+1; end if; writeline( log, str ); block_write( cmd, ret, 4, 9, x"00000000" ); -- DMA_CTRL - STOP -- вывод в файл -- writeline( log, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); cnt_ok := cnt_ok + 1; else write( str, string'("TEST finished with ERR" )); cnt_error := cnt_error + 1; end if; writeline( log, str ); writeline( log, str ); -- вывод в консоль -- writeline( output, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); else write( str, string'("TEST finished with ERR" )); end if; writeline( output, str ); writeline( output, str ); end test_dsc_incorrect; --! Запуск DMA приём одного блока 4 кБ procedure test_read_4kb ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ) is variable adr : std_logic_vector( 31 downto 0 ); variable data : std_logic_vector( 31 downto 0 ); variable str : line; variable error : integer:=0; variable dma_complete : integer; begin write( str, string'("TEST_READ_4KB" )); writeline( log, str ); ---- Формирование блока дескрипторов --- for ii in 0 to 127 loop adr:= x"00100000"; adr:=adr + ii*4; int_mem_write( cmd, ret, adr, x"00000000" ); end loop; int_mem_write( cmd, ret, x"00100000", x"00008000" ); int_mem_write( cmd, ret, x"00100004", x"00000100" ); int_mem_write( cmd, ret, x"001001F8", x"00000000" ); int_mem_write( cmd, ret, x"001001FC", x"762C4953" ); ---- Программирование канала DMA ---- block_write( cmd, ret, 4, 8, x"00000025" ); -- DMA_MODE block_write( cmd, ret, 4, 9, x"00000010" ); -- DMA_CTRL - RESET FIFO block_write( cmd, ret, 4, 20, x"00100000" ); -- PCI_ADRL block_write( cmd, ret, 4, 21, x"00100000" ); -- PCI_ADRH block_write( cmd, ret, 4, 23, x"0000A400" ); -- LOCAL_ADR block_write( cmd, ret, 4, 9, x"00000001" ); -- DMA_CTRL - START wait for 20 us; block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data( 8 )='1' ) then write( str, string'(" - Дескриптор правильный" )); else write( str, string'(" - Ошибка чтения дескриптора" )); error := error + 1; end if; writeline( log, str ); if( error=0 ) then ---- Ожидание завершения DMA ---- dma_complete := 0; for ii in 0 to 100 loop block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data(5)='1' ) then write( str, string'(" - DMA завершён " )); dma_complete := 1; end if; writeline( log, str ); if( dma_complete=1 ) then exit; end if; wait for 1 us; end loop; writeline( log, str ); if( dma_complete=0 ) then write( str, string'("Ошибка - DMA не завершён " )); writeline( log, str ); error:=error+1; end if; end if; for ii in 0 to 3 loop block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); writeline( log, str ); wait for 500 ns; end loop; block_write( cmd, ret, 4, 9, x"00000000" ); -- DMA_CTRL - STOP write( str, string'(" Прочитано: " )); writeline( log, str ); for ii in 0 to 15 loop adr:= x"00800000"; adr:=adr + ii*4; int_mem_read( cmd, ret, adr, data ); write( str, ii ); write( str, string'(" " )); hwrite( str, data ); writeline( log, str ); end loop; -- block_write( cmd, ret, 4, 9, x"00000010" ); -- DMA_CTRL - RESET FIFO -- block_write( cmd, ret, 4, 9, x"00000000" ); -- DMA_CTRL -- block_write( cmd, ret, 4, 9, x"00000001" ); -- DMA_CTRL - START -- вывод в файл -- writeline( log, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); cnt_ok := cnt_ok + 1; else write( str, string'("TEST finished with ERR" )); cnt_error := cnt_error + 1; end if; writeline( log, str ); writeline( log, str ); -- вывод в консоль -- writeline( output, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); else write( str, string'("TEST finished with ERR" )); end if; writeline( output, str ); writeline( output, str ); end test_read_4kb; --! Чтение 8 кБ из тетрады DIO_IN procedure test_adm_read_8kb ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ) is variable adr : std_logic_vector( 31 downto 0 ); variable data : std_logic_vector( 31 downto 0 ); variable str : line; variable error : integer:=0; variable dma_complete : integer; begin write( str, string'("TEST_ADM_READ_8KB" )); writeline( log, str ); ---- Формирование блока дескрипторов --- for ii in 0 to 127 loop adr:= x"00100000"; adr:=adr + ii*4; int_mem_write( cmd, ret, adr, x"00000000" ); end loop; --- Дескриптор 0 --- int_mem_write( cmd, ret, x"00100000", x"00008000" ); int_mem_write( cmd, ret, x"00100004", x"00000111" ); -- переход к следующему --- Дескриптор 1 --- int_mem_write( cmd, ret, x"00100008", x"00008010" ); int_mem_write( cmd, ret, x"0010000C", x"00000110" ); -- остановка int_mem_write( cmd, ret, x"001001F8", x"00000000" ); int_mem_write( cmd, ret, x"001001FC", x"D6644953" ); trd_test_mode( cmd, ret, 0 ); -- переход в рабочий режим -- ---- Программирование канала DMA ---- block_write( cmd, ret, 4, 8, x"00000027" ); -- DMA_MODE block_write( cmd, ret, 4, 9, x"00000010" ); -- DMA_CTRL - RESET FIFO block_write( cmd, ret, 4, 20, x"00100000" ); -- PCI_ADRL block_write( cmd, ret, 4, 21, x"00100000" ); -- PCI_ADRH block_write( cmd, ret, 4, 23, x"00019000" ); -- LOCAL_ADR ---- Подготовка тетрады ---- trd_test_mode( cmd, ret, 0 ); -- переход в рабочий режим -- trd_wait_cmd( cmd, ret, 0, 16, x"1600" ); -- DMAR0 - от тетрады 6 -- trd_wait_cmd( cmd, ret, 1, 16#1F#, x"0001" ); -- Размер блока = 4 кБ -- block_write( cmd, ret, 4, 9, x"00000001" ); -- DMA_CTRL - START trd_wait_cmd( cmd, ret, 1, 16#0F#, x"0001" ); -- Подключение выхода генератора к DIO_IN -- trd_wait_cmd( cmd, ret, 6, 0, x"2038" ); -- запуск тетрады DIO_IN trd_wait_cmd( cmd, ret, 1, 16#1E#, x"0020" ); -- Запуск тестовой последовательности -- wait for 20 us; block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data( 8 )='1' ) then write( str, string'(" - Дескриптор правильный" )); else write( str, string'(" - Ошибка чтения дескриптора" )); error := error + 1; end if; writeline( log, str ); if( error=0 ) then ---- Ожидание завершения DMA ---- dma_complete := 0; for ii in 0 to 100 loop block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data(5)='1' ) then write( str, string'(" - DMA завершён " )); dma_complete := 1; block_write( cmd, ret, 4, 16#11#, x"00000010" ); -- FLAG_CLR - сброс EOT end if; writeline( log, str ); if( dma_complete=1 ) then exit; end if; wait for 1 us; end loop; writeline( log, str ); if( dma_complete=0 ) then write( str, string'("Ошибка - DMA не завершён " )); writeline( log, str ); error:=error+1; end if; end if; for ii in 0 to 3 loop block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); writeline( log, str ); wait for 500 ns; end loop; block_write( cmd, ret, 4, 9, x"00000000" ); -- DMA_CTRL - STOP write( str, string'(" Блок 0 - прочитано: " )); writeline( log, str ); for ii in 0 to 15 loop adr:= x"00800000"; adr:=adr + ii*4; int_mem_read( cmd, ret, adr, data ); write( str, ii ); write( str, string'(" " )); hwrite( str, data ); writeline( log, str ); end loop; writeline( log, str ); write( str, string'(" Блок 1 - прочитано: " )); writeline( log, str ); for ii in 0 to 15 loop adr:= x"00801000"; adr:=adr + ii*4; int_mem_read( cmd, ret, adr, data ); write( str, ii ); write( str, string'(" " )); hwrite( str, data ); writeline( log, str ); end loop; -- block_write( cmd, ret, 4, 9, x"00000010" ); -- DMA_CTRL - RESET FIFO -- block_write( cmd, ret, 4, 9, x"00000000" ); -- DMA_CTRL -- block_write( cmd, ret, 4, 9, x"00000001" ); -- DMA_CTRL - START -- вывод в файл -- writeline( log, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); cnt_ok := cnt_ok + 1; else write( str, string'("TEST finished with ERR" )); cnt_error := cnt_error + 1; end if; writeline( log, str ); writeline( log, str ); -- вывод в консоль -- writeline( output, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); else write( str, string'("TEST finished with ERR" )); end if; writeline( output, str ); writeline( output, str ); end test_adm_read_8kb; --! Проверка обращений к блоку MAIN procedure test_block_main ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ) is variable adr : std_logic_vector( 31 downto 0 ); variable data : std_logic_vector( 31 downto 0 ); variable str : line; variable error : integer:=0; variable dma_complete : integer; begin write( str, string'("TEST_BLOCK_MAIN" )); writeline( log, str ); block_write( cmd, ret, 4, 16#08#, x"0000AA55" ); block_read( cmd, ret, 4, 16#08#, data ); write( str, string'("БЛОК 4: " )); hwrite( str, data ); writeline( log, str ); wait for 10 us; write( str, "Константы:" ); writeline( log, str ); for ii in 0 to 5 loop write( str, "Блок " ); write( str, ii ); for jj in 0 to 7 loop block_read( cmd, ret, ii, jj, data ); write( str, " " ); hwrite( str, data ); end loop; writeline( log, str ); end loop; writeline( log, str ); block_read( cmd, ret, 0, 16#10#, data ); write( str, "STATUS: " ); hwrite( str, data ); writeline( log, str ); block_write( cmd, ret, 80, 16#08#, x"00000100" ); block_read( cmd, ret, 0, 16#10#, data ); write( str, "STATUS: " ); hwrite( str, data ); writeline( log, str ); block_write( cmd, ret, 80, 16#08#, x"00000200" ); block_read( cmd, ret, 0, 16#10#, data ); write( str, "STATUS: " ); hwrite( str, data ); writeline( log, str ); for ii in 0 to 7 loop block_write( cmd, ret, 4, 16#08#, x"0000AA55" ); block_read( cmd, ret, 4, 8, data ); write( str, string'("READ: " )); hwrite( str, data( 15 downto 0 ) ); writeline( log, str ); if( data/=x"0000AA55" ) then error:=error+1; end if; end loop; -- вывод в файл -- writeline( log, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); cnt_ok := cnt_ok + 1; else write( str, string'("TEST finished with ERR" )); cnt_error := cnt_error + 1; end if; writeline( log, str ); writeline( log, str ); -- вывод в консоль -- writeline( output, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); else write( str, string'("TEST finished with ERR" )); end if; writeline( output, str ); writeline( output, str ); end test_block_main; --! Чтение 16 кБ с использованием двух блоков дескрипторов procedure test_adm_read_16kb ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ) is variable adr : std_logic_vector( 31 downto 0 ); variable data : std_logic_vector( 31 downto 0 ); variable str : line; variable error : integer:=0; variable dma_complete : integer; variable kk : integer; variable status : std_logic_vector( 15 downto 0 ); begin write( str, string'("TEST_ADM_READ_16KB" )); writeline( log, str ); ---- Формирование блока дескрипторов --- for ii in 0 to 256 loop adr:= x"00100000"; adr:=adr + ii*4; int_mem_write( cmd, ret, adr, x"00000000" ); end loop; --- Блок 0 --- --- Дескриптор 0 --- int_mem_write( cmd, ret, x"00100000", x"00008000" ); int_mem_write( cmd, ret, x"00100004", x"00000111" ); -- переход к следующему дескриптору --- Дескриптор 1 --- int_mem_write( cmd, ret, x"00100008", x"00008010" ); int_mem_write( cmd, ret, x"0010000C", x"00000112" ); -- переход к следующему блоку --- Дескриптор 2 --- int_mem_write( cmd, ret, x"00100010", x"00001002" ); -- адрес следующего дескриптора int_mem_write( cmd, ret, x"00100014", x"00000000" ); int_mem_write( cmd, ret, x"001001F8", x"00000000" ); int_mem_write( cmd, ret, x"001001FC", x"14644953" ); --- Блок 1 --- --- Дескриптор 0 --- int_mem_write( cmd, ret, x"00100200", x"00008020" ); int_mem_write( cmd, ret, x"00100204", x"00000111" ); -- переход к следующему дескриптору --- Дескриптор 1 --- int_mem_write( cmd, ret, x"00100208", x"00008030" ); int_mem_write( cmd, ret, x"0010020C", x"00000110" ); -- остановка int_mem_write( cmd, ret, x"001003F8", x"00000000" ); int_mem_write( cmd, ret, x"001003FC", x"D67C4953" ); ---- Программирование канала DMA ---- block_write( cmd, ret, 4, 8, x"00000027" ); -- DMA_MODE block_write( cmd, ret, 4, 9, x"00000010" ); -- DMA_CTRL - RESET FIFO block_write( cmd, ret, 4, 20, x"00100000" ); -- PCI_ADRL block_write( cmd, ret, 4, 21, x"00100000" ); -- PCI_ADRH block_write( cmd, ret, 4, 23, x"00019000" ); -- LOCAL_ADR ---- Подготовка тетрады ---- trd_test_mode( cmd, ret, 0 ); -- переход в рабочий режим -- trd_wait_cmd( cmd, ret, 0, 16, x"1600" ); -- DMAR0 - от тетрады 6 -- trd_wait_cmd( cmd, ret, 1, 16#1F#, x"0001" ); -- Размер блока = 4 кБ -- block_write( cmd, ret, 4, 9, x"00000001" ); -- DMA_CTRL - START trd_wait_cmd( cmd, ret, 1, 16#0F#, x"0001" ); -- Подключение выхода генератора к DIO_IN -- trd_wait_cmd( cmd, ret, 6, 0, x"2038" ); -- запуск тетрады DIO_IN trd_wait_cmd( cmd, ret, 1, 16#1E#, x"06A0" ); -- Запуск тестовой последовательности -- wait for 20 us; block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data( 8 )='1' ) then write( str, string'(" - Дескриптор правильный" )); else write( str, string'(" - Ошибка чтения дескриптора" )); error := error + 1; end if; writeline( log, str ); if( error=0 ) then kk:=0; loop trd_status( cmd, ret, 6, status ); write( str, string'("TRD_STATUS: " )); hwrite( str, status ); block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'(" STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data(4)='1' ) then write( str, string'(" - завершено чтение блока " )); block_write( cmd, ret, 4, 16#11#, x"00000010" ); -- FLAG_CLR - сброс EOT kk:=kk+1; if( kk=4 ) then exit; end if; end if; writeline( log, str ); wait for 500 ns; end loop; ---- Ожидание завершения DMA ---- dma_complete := 0; for ii in 0 to 100 loop block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data(5)='1' ) then write( str, string'(" - DMA завершён " )); dma_complete := 1; block_write( cmd, ret, 4, 16#11#, x"00000010" ); -- FLAG_CLR - сброс EOT end if; writeline( log, str ); if( dma_complete=1 ) then exit; end if; wait for 1 us; end loop; writeline( log, str ); if( dma_complete=0 ) then write( str, string'("Ошибка - DMA не завершён " )); writeline( log, str ); error:=error+1; end if; end if; for ii in 0 to 3 loop block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); writeline( log, str ); wait for 500 ns; end loop; block_write( cmd, ret, 4, 9, x"00000000" ); -- DMA_CTRL - STOP write( str, string'(" Блок 0 - прочитано: " )); writeline( log, str ); for ii in 0 to 15 loop adr:= x"00800000"; adr:=adr + ii*4; int_mem_read( cmd, ret, adr, data ); write( str, ii ); write( str, string'(" " )); hwrite( str, data ); writeline( log, str ); end loop; writeline( log, str ); write( str, string'(" Блок 1 - прочитано: " )); writeline( log, str ); for ii in 0 to 15 loop adr:= x"00801000"; adr:=adr + ii*4; int_mem_read( cmd, ret, adr, data ); write( str, ii ); write( str, string'(" " )); hwrite( str, data ); writeline( log, str ); end loop; write( str, string'(" Блок 2 - прочитано: " )); writeline( log, str ); for ii in 0 to 15 loop adr:= x"00802000"; adr:=adr + ii*4; int_mem_read( cmd, ret, adr, data ); write( str, ii ); write( str, string'(" " )); hwrite( str, data ); writeline( log, str ); end loop; write( str, string'(" Блок 3 - прочитано: " )); writeline( log, str ); for ii in 0 to 15 loop adr:= x"00803000"; adr:=adr + ii*4; int_mem_read( cmd, ret, adr, data ); write( str, ii ); write( str, string'(" " )); hwrite( str, data ); writeline( log, str ); end loop; -- block_write( cmd, ret, 4, 9, x"00000010" ); -- DMA_CTRL - RESET FIFO -- block_write( cmd, ret, 4, 9, x"00000000" ); -- DMA_CTRL -- block_write( cmd, ret, 4, 9, x"00000001" ); -- DMA_CTRL - START -- вывод в файл -- writeline( log, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); cnt_ok := cnt_ok + 1; else write( str, string'("TEST finished with ERR" )); cnt_error := cnt_error + 1; end if; writeline( log, str ); writeline( log, str ); -- вывод в консоль -- writeline( output, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); else write( str, string'("TEST finished with ERR" )); end if; writeline( output, str ); writeline( output, str ); end test_adm_read_16kb; --! Запись 16 кБ с использованием двух блоков дескрипторов procedure test_adm_write_16kb ( signal cmd: out bh_cmd; --! команда signal ret: in bh_ret --! ответ ) is variable adr : std_logic_vector( 31 downto 0 ); variable data : std_logic_vector( 31 downto 0 ); variable str : line; variable error : integer:=0; variable dma_complete : integer; variable kk : integer; variable status : std_logic_vector( 15 downto 0 ); begin write( str, string'("TEST_ADM_WRITE_16KB" )); writeline( log, str ); ---- Формирование блока дескрипторов --- for ii in 0 to 256 loop adr:= x"00100000"; adr:=adr + ii*4; int_mem_write( cmd, ret, adr, x"00000000" ); end loop; ---- Заполнение памяти ---- for ii in 0 to 256 loop adr:= x"00800000"; adr:=adr + ii*4; data:=x"00A00000"; data:=data + ii; int_mem_write( cmd, ret, adr, data ); end loop; for ii in 0 to 1023 loop adr:= x"00801000"; adr:=adr + ii*4; data:=x"00A10000"; data:=data + ii; int_mem_write( cmd, ret, adr, data ); end loop; for ii in 0 to 256 loop adr:= x"00802000"; adr:=adr + ii*4; data:=x"00A20000"; data:=data + ii; int_mem_write( cmd, ret, adr, data ); end loop; for ii in 0 to 256 loop adr:= x"00803000"; adr:=adr + ii*4; data:=x"00A30000"; data:=data + ii; int_mem_write( cmd, ret, adr, data ); end loop; --- Блок 0 --- --- Дескриптор 0 --- int_mem_write( cmd, ret, x"00100000", x"00008000" ); int_mem_write( cmd, ret, x"00100004", x"00000011" ); -- переход к следующему дескриптору --- Дескриптор 1 --- int_mem_write( cmd, ret, x"00100008", x"00008010" ); int_mem_write( cmd, ret, x"0010000C", x"00000012" ); -- переход к следующему блоку --- Дескриптор 2 --- int_mem_write( cmd, ret, x"00100010", x"00001002" ); -- адрес следующего дескриптора int_mem_write( cmd, ret, x"00100014", x"00000000" ); int_mem_write( cmd, ret, x"001001F8", x"00000000" ); int_mem_write( cmd, ret, x"001001FC", x"14A44953" ); --- Блок 1 --- --- Дескриптор 0 --- int_mem_write( cmd, ret, x"00100200", x"00008020" ); int_mem_write( cmd, ret, x"00100204", x"00000011" ); -- переход к следующему дескриптору --- Дескриптор 1 --- int_mem_write( cmd, ret, x"00100208", x"00008030" ); int_mem_write( cmd, ret, x"0010020C", x"00000010" ); -- остановка int_mem_write( cmd, ret, x"001003F8", x"00000000" ); int_mem_write( cmd, ret, x"001003FC", x"D6BC4953" ); ---- Программирование канала DMA ---- block_write( cmd, ret, 4, 8, x"00000023" ); -- DMA_MODE block_write( cmd, ret, 4, 9, x"00000010" ); -- DMA_CTRL - RESET FIFO block_write( cmd, ret, 4, 20, x"00100000" ); -- PCI_ADRL block_write( cmd, ret, 4, 21, x"00100000" ); -- PCI_ADRH block_write( cmd, ret, 4, 23, x"0001D000" ); -- LOCAL_ADR ---- Подготовка тетрады ---- trd_test_mode( cmd, ret, 0 ); -- переход в рабочий режим -- trd_wait_cmd( cmd, ret, 0, 16, x"1700" ); -- DMAR0 - от тетрады 7 -- trd_wait_cmd( cmd, ret, 1, 16#1D#, x"0001" ); -- Размер блока = 4 кБ -- block_write( cmd, ret, 4, 9, x"00000001" ); -- DMA_CTRL - START trd_wait_cmd( cmd, ret, 1, 16#0F#, x"0001" ); -- Подключение выхода генератора к DIO_IN -- trd_wait_cmd( cmd, ret, 7, 0, x"2038" ); -- запуск тетрады DIO_OUT trd_wait_cmd( cmd, ret, 1, 16#1C#, x"0020" ); -- Запуск тестовой последовательности -- wait for 20 us; for ii in 0 to 20 loop block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data( 8 )='1' ) then write( str, string'(" - Дескриптор правильный" )); error := 0; exit; else write( str, string'(" - Ошибка чтения дескриптора" )); error := error + 1; wait for 10 us; end if; writeline( log, str ); end loop; if( error=0 ) then kk:=0; loop trd_status( cmd, ret, 6, status ); write( str, string'("TRD_STATUS: " )); hwrite( str, status ); block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'(" STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data(4)='1' ) then write( str, string'(" - завершено чтение блока " )); block_write( cmd, ret, 4, 16#11#, x"00000010" ); -- FLAG_CLR - сброс EOT kk:=kk+1; if( kk=4 ) then exit; end if; end if; writeline( log, str ); wait for 500 ns; end loop; ---- Ожидание завершения DMA ---- dma_complete := 0; for ii in 0 to 100 loop block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); if( data(5)='1' ) then write( str, string'(" - DMA завершён " )); dma_complete := 1; block_write( cmd, ret, 4, 16#11#, x"00000010" ); -- FLAG_CLR - сброс EOT end if; writeline( log, str ); if( dma_complete=1 ) then exit; end if; wait for 1 us; end loop; writeline( log, str ); if( dma_complete=0 ) then write( str, string'("Ошибка - DMA не завершён " )); writeline( log, str ); error:=error+1; end if; end if; for ii in 0 to 3 loop block_read( cmd, ret, 4, 16, data ); -- STATUS write( str, string'("STATUS: " )); hwrite( str, data( 15 downto 0 ) ); writeline( log, str ); wait for 500 ns; end loop; block_write( cmd, ret, 4, 9, x"00000000" ); -- DMA_CTRL - STOP -- block_write( cmd, ret, 4, 9, x"00000010" ); -- DMA_CTRL - RESET FIFO -- block_write( cmd, ret, 4, 9, x"00000000" ); -- DMA_CTRL -- block_write( cmd, ret, 4, 9, x"00000001" ); -- DMA_CTRL - START -- вывод в файл -- writeline( log, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); cnt_ok := cnt_ok + 1; else write( str, string'("TEST finished with ERR" )); cnt_error := cnt_error + 1; end if; writeline( log, str ); writeline( log, str ); -- вывод в консоль -- writeline( output, str ); if( error=0 ) then write( str, string'("TEST finished successfully" )); else write( str, string'("TEST finished with ERR" )); end if; writeline( output, str ); writeline( output, str ); end test_adm_write_16kb; end package body test_pkg;
Go to most recent revision | Compare with Previous | Blame | View Log