URL
https://opencores.org/ocsvn/pcie_ds_dma/pcie_ds_dma/trunk
Subversion Repositories pcie_ds_dma
[/] [pcie_ds_dma/] [trunk/] [projects/] [sp605_lx45t_wishbone/] [src/] [top/] [sp605_lx45t_wishbone.ucf] - Rev 56
Go to most recent revision | Compare with Previous | Blame | View Log
##-----------------------------------------------------------------------------
##
## (c) Copyright 2007, 2008, 2009 Xilinx, Inc. All rights reserved.
##
## This file contains confidential and proprietary information
## of Xilinx, Inc. and is protected under U.S. and
## international copyright and other intellectual property
## laws.
##
## DISCLAIMER
## This disclaimer is not a license and does not grant any
## rights to the materials distributed herewith. Except as
## otherwise provided in a valid license issued to you by
## Xilinx, and to the maximum extent permitted by applicable
## law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
## WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
## AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
## BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
## INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
## (2) Xilinx shall not be liable (whether in contract or tort,
## including negligence, or under any other theory of
## liability) for any loss or damage of any kind or nature
## related to, arising under or in connection with these
## materials, including for any direct, or any indirect,
## special, incidental, or consequential loss or damage
## (including loss of data, profits, goodwill, or any type of
## loss or damage suffered as a result of any action brought
## by a third party) even if such damage or loss was
## reasonably foreseeable or Xilinx had been advised of the
## possibility of the same.
##
## CRITICAL APPLICATIONS
## Xilinx products are not designed or intended to be fail-
## safe, or for use in any application requiring fail-safe
## performance, such as life-support or safety devices or
## systems, Class III medical devices, nuclear facilities,
## applications related to the deployment of airbags, or any
## other applications that could lead to death, personal
## injury, or severe property or environmental damage
## (individually and collectively, "Critical
## Applications"). Customer assumes the sole risk and
## liability of any use of Xilinx products in Critical
## Applications, subject only to applicable laws and
## regulations governing limitations on product liability.
##
## THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
## PART OF THIS FILE AT ALL TIMES.
##
##-----------------------------------------------------------------------------
## Project : Spartan-6 Integrated Block for PCI Express
## File : xilinx_pcie_1_lane_ep_xc6slx150t-fgg676-2.ucf
## Description: Example User Constraints File
##
## Use this file only with the device listed below. Any other
## combination is invalid. Do not modify this file except in
## regions designated for "User" constraints.
##-----------------------------------------------------------------------------
###############################################################################
# Define Device, Package And Speed Grade
###############################################################################
#CONFIG PART = xc6slx150t-fgg676-2;
###############################################################################
# User Time Names / User Time Groups / Time Specs
###############################################################################
###############################################################################
# User Physical Constraints
###############################################################################
###############################################################################
# Pinout and Related I/O Constraints
###############################################################################
#
# SYS reset (input) signal. The sys_reset_n signal should be
# obtained from the PCI Express interface if possible. For
# slot based form factors, a system reset signal is usually
# present on the connector. For cable based form factors, a
# system reset signal may not be available. In this case, the
# system reset signal must be generated locally by some form of
# supervisory circuit. You may change the IOSTANDARD and LOC
# to suit your requirements and VCCO voltage banking rules.
#
NET sys_reset_n LOC = J7 | IOSTANDARD = LVCMOS25 | PULLUP | NODELAY;
# SYS clock 100 or 125 MHz (input) signal. The sys_clk_p and sys_clk_n
# signals are the PCI Express reference clock. Spartan-6 GTP
# Transceiver architecture requires the use of dedicated clock
# resources (FPGA input pins) associated with each GTP Transceiver Tile.
# To use these pins an IBUFDS primitive (refclk_ibuf) is
# instantiated in the example design.
# Please refer to the Spartan-6 GTP Transceiver User Guide
# for guidelines regarding clock resource selection.
#
#NET sys_clk_n LOC = A10;
#NET sys_clk_p LOC = B10;
#
# Transceiver instance placement. This constraint selects the
# transceiver to be used, which also dictates the pinout for the
# transmit and receive differential pairs. Please refer to the
# Spartan-6 GTP Transceiver User Guide for more
# information.
#
# PCIe Lane 0
INST cl_s6pcie_m2_i/GT_i/tile0_gtpa1_dual_wrapper_i/gtpa1_dual_i LOC = GTPA1_DUAL_X0Y1;
NET pci_exp_txp<0> LOC = B6;
NET pci_exp_txn<0> LOC = A6;
NET pci_exp_rxp<0> LOC = D7;
NET pci_exp_rxn<0> LOC = C7;
NET "gpio_led0" LOC = D17;
NET "gpio_led1" LOC = AB4;
NET "gpio_led2" LOC = D21;
NET "gpio_led3" LOC = W15;
###############################################################################
# Physical Constraints
###############################################################################
###############################################################################
# Timing Constraints
###############################################################################
#
# Ignore timing on asynchronous signals.
#
NET sys_reset_n TIG;
#
# Timing requirements and related constraints.
#
#NET sys_clk_c PERIOD = 8ns;
NET sys_clk_p TNM_NET = GT_REFCLK_OUT;
NET */ep/gt_refclk_out(0) TNM_NET = GT_REFCLK_OUT;
TIMESPEC TS_GT_REFCLK_OUT = PERIOD GT_REFCLK_OUT 8ns HIGH 50 % ;
NET "WB_SOPC/s_wb_clk" TNM_NET = WB_CLK;
TIMESPEC TS_WB_CLK = PERIOD WB_CLK 30 ns;
###############################################################################
# End
###############################################################################
INST "WB_SOPC/PCIE_CORE64_WB/CORE/ep" AREA_GROUP = "pblock_ep";
AREA_GROUP "pblock_ep" RANGE=SLICE_X4Y96:SLICE_X7Y125;
AREA_GROUP "pblock_ep" RANGE=RAMB16_X0Y48:RAMB16_X0Y62;
AREA_GROUP "pblock_ep" RANGE=RAMB8_X0Y48:RAMB8_X0Y63;
INST "WB_SOPC/PCIE_CORE64_WB/CORE/rx" AREA_GROUP = "pblock_rx";
AREA_GROUP "pblock_rx" RANGE=SLICE_X8Y111:SLICE_X17Y88;
INST "WB_SOPC/PCIE_CORE64_WB/CORE/tx" AREA_GROUP = "pblock_tx";
AREA_GROUP "pblock_tx" RANGE=SLICE_X20Y88:SLICE_X29Y111;
INST "WB_SOPC/PCIE_CORE64_WB/CORE/reg" AREA_GROUP = "pblock_reg";
AREA_GROUP "pblock_reg" RANGE=SLICE_X18Y85:SLICE_X19Y95, SLICE_X12Y85:SLICE_X17Y87;
INST "WB_SOPC/PCIE_CORE64_WB/CORE/int" AREA_GROUP = "pblock_int";
AREA_GROUP "pblock_int" RANGE=SLICE_X0Y122:SLICE_X3Y125;
INST "WB_SOPC/PCIE_CORE64_WB/CORE/disp" AREA_GROUP = "pblock_disp";
AREA_GROUP "pblock_disp" RANGE=SLICE_X20Y87:SLICE_X29Y83;
INST "WB_SOPC/PCIE_CORE64_WB/CORE/fifo" AREA_GROUP = "pblock_fifo";
AREA_GROUP "pblock_fifo" RANGE=SLICE_X18Y72:SLICE_X29Y82, SLICE_X8Y72:SLICE_X17Y84, SLICE_X2Y72:SLICE_X7Y95;
AREA_GROUP "pblock_fifo" RANGE=RAMB16_X0Y36:RAMB16_X1Y46;
AREA_GROUP "pblock_fifo" RANGE=RAMB8_X0Y36:RAMB8_X1Y47;
INST "WB_SOPC/PCIE_CORE64_WB/PE_MAIN" AREA_GROUP = "pblock_PE_MAIN";
AREA_GROUP "pblock_PE_MAIN" RANGE=SLICE_X24Y119:SLICE_X29Y113;
INST "WB_SOPC/PCIE_CORE64_WB/PW_WB" AREA_GROUP = "pblock_PW_WB";
AREA_GROUP "pblock_PW_WB" RANGE=SLICE_X4Y68:SLICE_X21Y71;
INST "WB_SOPC/WB_CROSS" AREA_GROUP = "pblock_WB_CROSS";
AREA_GROUP "pblock_WB_CROSS" RANGE=SLICE_X4Y56:SLICE_X21Y67;
INST "WB_SOPC/TEST_CHECK" AREA_GROUP = "pblock_TEST_CHECK";
AREA_GROUP "pblock_TEST_CHECK" RANGE=SLICE_X4Y24:SLICE_X17Y55;
AREA_GROUP "pblock_TEST_CHECK" RANGE=RAMB16_X0Y12:RAMB16_X0Y26;
AREA_GROUP "pblock_TEST_CHECK" RANGE=RAMB8_X0Y12:RAMB8_X0Y27;
INST "WB_SOPC/TEST_GEN" AREA_GROUP = "pblock_TEST_GEN";
AREA_GROUP "pblock_TEST_GEN" RANGE=SLICE_X18Y24:SLICE_X27Y55;
AREA_GROUP "pblock_TEST_GEN" RANGE=RAMB16_X1Y12:RAMB16_X1Y26;
AREA_GROUP "pblock_TEST_GEN" RANGE=RAMB8_X1Y12:RAMB8_X1Y27;
Go to most recent revision | Compare with Previous | Blame | View Log