URL
https://opencores.org/ocsvn/pcie_ds_dma/pcie_ds_dma/trunk
Subversion Repositories pcie_ds_dma
[/] [pcie_ds_dma/] [trunk/] [soft/] [linux/] [common/] [utils/] [cl_wbpex.cpp] - Rev 49
Go to most recent revision | Compare with Previous | Blame | View Log
//--------------------------------------------------------------------------- #include <stdio.h> #include <stdint.h> #include "board.h" //#include "brderr.h" //#include "ctrlstrm.h" //#include "ctrlreg.h" //#include "useful.h" //#include "cl_wbpex.h" #ifndef __PEX_BOARD_H__ #include "pex_board.h" #endif #ifndef __BOARD_H__ #include "board.h" #endif #include "cl_wbpex.h" #include "sys/select.h" //BRD_Handle g_hBrd=0; //! Инициализация модуля U32 CL_WBPEX::init( void ) { //S32 err; //S32 num; /* if( g_hBrd<=0) { BRDC_fprintf( stderr, _BRDC("\r\nМодуль не найден\r\n") ); return 1; } else { BRDC_fprintf( stderr, _BRDC("BRD_open() - Ok\r\n") ); BRD_getInfo(1, &info ); } */ board *brd = new pex_board(); m_pBoard = brd; brd->brd_open( "/dev/pexdrv0" ); brd->brd_init(); brd->brd_board_info(); //brd->brd_pld_info(); // сброс прошивки ПЛИС return 0; } //! Завершение работы с модулем void CL_WBPEX::cleanup( void ) { //S32 ret; //ret=BRD_cleanup(); } // Доступ к регистрам CL_WBPEX::CL_WBPEX() { } int CL_WBPEX::StreamInit( U32 strm, U32 cnt_buf, U32 size_one_buf_of_bytes, U32 trd, U32 dir, U32 cycle, U32 system, U32 agree_mode ) { if( strm>1 ) return 1; DEBUG_PRINT("CL_AMBPEX::%s( cycle=%d)\n", __FUNCTION__, cycle ); StreamParam *pStrm= m_streamParam+strm; if( pStrm->status!=0 ) return 1; pStrm->cnt_buf = cnt_buf; pStrm->size_one_buf_of_bytes = size_one_buf_of_bytes; //pStrm->trd = trd; pStrm->cycle = cycle; pStrm->system = system; pStrm->indexDma=-1; pStrm->indexPc=-1; pStrm->agree_mode=agree_mode; StreamDestroy( strm ); __int64 size=cnt_buf*(__int64)size_one_buf_of_bytes/(1024*1024); if( system ) { BRDC_fprintf( stderr, _BRDC("Allocation memory: \r\n") _BRDC(" Type of buffer: system memory\r\n") _BRDC(" Buffer size: %lld MB (%dx%d MB)\r\n\r\n"), size, cnt_buf, size_one_buf_of_bytes/(1024*1024) ); } else { BRDC_fprintf( stderr, _BRDC("Allocation memory: \r\n") _BRDC(" Type of buffer: userspace memory\r\n") _BRDC(" Buffer size: %lld MB (%dx%d MB)\r\n\r\n"), size, cnt_buf, size_one_buf_of_bytes/(1024*1024) ); } BRDctrl_StreamCBufAlloc sSCA = { dir, system, cnt_buf, size_one_buf_of_bytes, (void**)&pStrm->pBlk[0], NULL, }; u32 err = m_pBoard->dma_alloc( strm, &sSCA ); if(err != 0) { throw( "Error allocate stream memory\n" ); return -1; } pStrm->pStub=sSCA.pStub; if(!pStrm->pStub) { throw( "Error allocate stream memory\n" ); } else { printf( "Allocate stream memory - Ok\n" ); } /* for(int j=0; j<sSCA.blkNum; j++) { fprintf(stderr, "%s(): pBlk[%d] = %p\n", __FUNCTION__, j, pStrm->pBlk[j]); } fprintf(stderr, "%s(): pStub = %p\n", __FUNCTION__, pStrm->pStub); fprintf(stderr, "%s(): Press enter...\n", __FUNCTION__); getchar(); */ m_pBoard->dma_set_local_addr( strm, 0x3000 ); // Перевод на согласованный режим работы if( agree_mode ) { err = m_pBoard->dma_adjust(strm, 1); BRDC_fprintf( stderr, _BRDC("Stream working in adjust mode\n")); } else { BRDC_fprintf( stderr, _BRDC("Stream working in regular mode\n")); } m_pBoard->dma_stop(strm); m_pBoard->dma_reset_fifo(strm); m_pBoard->dma_reset_fifo(strm); pStrm->status=1; return 0; } int CL_WBPEX::StreamGetNextIndex( U32 strm, U32 index ) { if( strm>1 ) return 0; DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__); StreamParam *pStrm= m_streamParam+strm; int n=index+1; if( (U32)n>=pStrm->cnt_buf ) n=0; return n; } void CL_WBPEX::StreamDestroy( U32 strm ) { if( strm>1 ) return; DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__); StreamParam *pStrm= m_streamParam+strm; if( pStrm->status==0 ) return; StreamStop( strm ); m_pBoard->dma_free_memory( strm ); pStrm->status=0; } U32* CL_WBPEX::StreamGetBufByNum( U32 strm, U32 numBuf ) { if( strm>1 ) return NULL; DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__); StreamParam *pStrm= m_streamParam+strm; if( pStrm->status!=1 ) return NULL; U32 *ptr; if( numBuf>=pStrm->cnt_buf ) return NULL; ptr=(U32*)(pStrm->pBlk[numBuf]); return ptr; } void CL_WBPEX::StreamStart( U32 strm ) { if( strm>1 ) return; DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__); StreamParam *pStrm= m_streamParam+strm; if( pStrm->status!=1 ) return; U32 val; //val=RegPeekInd( pStrm->trd, 0 ); m_pBoard->dma_stop(strm); pStrm->indexDma=-1; pStrm->indexPc=-1; val=pStrm->cycle; // 0 - однократный режим, 1 - циклический m_pBoard->dma_start(strm, val); } void CL_WBPEX::StreamStop( U32 strm ) { if( strm>1 ) return; DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__); StreamParam *pStrm= m_streamParam+strm; //RegPokeInd( pStrm->trd, 0, 2 ); m_pBoard->dma_stop(strm); m_pBoard->dma_reset_fifo(strm); //RegPokeInd( pStrm->trd, 0, 0 ); } int CL_WBPEX::StreamGetBuf( U32 strm, U32** ptr ) { U32 *buf; int ret=0; if( strm>1 ) return 0; StreamParam *pStrm= m_streamParam+strm; DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__); if( pStrm->indexPc==pStrm->indexDma ) { pStrm->indexDma = StreamGetIndexDma( strm ); } if( pStrm->indexPc!=pStrm->indexDma ) { pStrm->indexPc=StreamGetNextIndex( strm, pStrm->indexPc ); buf = StreamGetBufByNum( strm, pStrm->indexPc ); *ptr = buf; ret=1; StreamGetBufDone( strm ); } return ret; } int CL_WBPEX::StreamGetIndexDma( U32 strm ) { if( strm>1 ) return -1; DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__); StreamParam *pStrm= m_streamParam+strm; if(!pStrm->pStub) { //fprintf(stderr, "%s(): pStub is %p\n", __FUNCTION__, pStrm->pStub); return 0; } int lastBlock = pStrm->pStub->lastBlock; //fprintf(stderr, "%s(): lastBlock = %d\n", __FUNCTION__, lastBlock); return lastBlock; } void CL_WBPEX::StreamGetBufDone( U32 strm ) { DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__); if( strm>1 ) return; StreamParam *pStrm= m_streamParam+strm; S32 err; static U32 err_code=0; if( pStrm->agree_mode ) { //fprintf(stderr, "%s(): Press enter to continue block %d...\n", __FUNCTION__, pStrm->indexPc); //getchar(); err = m_pBoard->dma_done(strm, pStrm->indexPc); if(!err) err_code++; // Ошибка перевода в согласованный режим } } /* void Sleep( int ms ) { struct timeval tv = {0, 0}; tv.tv_usec = 1000*ms; select(0,NULL,NULL,NULL,&tv); } */ //! Запись в регистр блока на шине WB void CL_WBPEX::wb_block_write( U32 nb, U32 reg, U32 val ) { if( (nb>1) || (reg>31) ) return; m_pBoard->brd_bar1_write( nb*0x2000/8+reg, val ); } //! Чтение из регистра блока на шине WB U32 CL_WBPEX::wb_block_read( U32 nb, U32 reg ) { U32 ret; if( (nb>1) || (reg>31) ) return -1; ret=m_pBoard->brd_bar1_read( nb*0x2000/8+reg ); return ret; }
Go to most recent revision | Compare with Previous | Blame | View Log