URL
https://opencores.org/ocsvn/pcie_mini/pcie_mini/trunk
Subversion Repositories pcie_mini
[/] [pcie_mini/] [trunk/] [example_design/] [gtpa1_dual_wrapper_tile.vhd] - Rev 9
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------- -- ____ ____ -- / /\/ / -- /___/ \ / Vendor: Xilinx -- \ \ \/ Version : 1.3 -- \ \ Application : Spartan-6 FPGA GTP Transceiver Wizard -- / / Filename : gtpa1_dual_wrapper_tile.vhd -- /___/ /\ Timestamp : -- \ \ / \ -- \___\/\___\ -- -- -- Module GTPA1_DUAL_WRAPPER_TILE (a GTPA1_DUAL Tile Wrapper) -- Generated by Xilinx Spartan-6 FPGA GTP Transceiver Wizard -- -- -- (c) Copyright 2009 Xilinx, Inc. All rights reserved. -- -- This file contains confidential and proprietary information -- of Xilinx, Inc. and is protected under U.S. and -- international copyright and other intellectual property -- laws. -- -- DISCLAIMER -- This disclaimer is not a license and does not grant any -- rights to the materials distributed herewith. Except as -- otherwise provided in a valid license issued to you by -- Xilinx, and to the maximum extent permitted by applicable -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -- (2) Xilinx shall not be liable (whether in contract or tort, -- including negligence, or under any other theory of, -- liability) for any loss or damage of any kind or nature -- related to, arising under or in connection with these -- materials, including for any direct, or any indirect, -- special, incidental, or consequential loss or damage -- (including loss of data, profits, goodwill, or any type of -- loss or damage suffered as a result of any action brought -- by a third party) even if such damage or loss was -- reasonably foreseeable or Xilinx had been advised of the -- possibility of the same. -- -- CRITICAL APPLICATIONS -- Xilinx products are not designed or intended to be fail- -- safe, or for use in any application requiring fail-safe -- performance, such as life-support or safety devices or -- systems, Class III medical devices, nuclear facilities, -- applications related to the deployment of airbags, or any -- other applications that could lead to death, personal -- injury, or severe property or environmental damage -- (individually and collectively, "Critical -- Applications"). Customer assumes the sole risk and -- liability of any use of Xilinx products in Critical -- Applications, subject only to applicable laws and -- regulations governing limitations on product liability. -- -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -- PART OF THIS FILE AT ALL TIMES. library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; library UNISIM; use UNISIM.VCOMPONENTS.ALL; --***************************** Entity Declaration **************************** entity GTPA1_DUAL_WRAPPER_TILE is generic ( -- Simulation attributes TILE_SIM_GTPRESET_SPEEDUP : integer := 0; -- Set to 1 to speed up sim reset -- TILE_CLKINDC_B_0 : boolean := FALSE; TIlE_CLKINDC_B_1 : boolean := FALSE; -- TILE_PLL_SOURCE_0 : string := "PLL0"; TILE_PLL_SOURCE_1 : string := "PLL1" ); port ( ------------------------ Loopback and Powerdown Ports ---------------------- RXPOWERDOWN0_IN : in std_logic_vector(1 downto 0); RXPOWERDOWN1_IN : in std_logic_vector(1 downto 0); TXPOWERDOWN0_IN : in std_logic_vector(1 downto 0); TXPOWERDOWN1_IN : in std_logic_vector(1 downto 0); --------------------------------- PLL Ports -------------------------------- CLK00_IN : in std_logic; CLK01_IN : in std_logic; GTPRESET0_IN : in std_logic; GTPRESET1_IN : in std_logic; PLLLKDET0_OUT : out std_logic; PLLLKDET1_OUT : out std_logic; RESETDONE0_OUT : out std_logic; RESETDONE1_OUT : out std_logic; ----------------------- Receive Ports - 8b10b Decoder ---------------------- RXCHARISK0_OUT : out std_logic_vector(1 downto 0); RXCHARISK1_OUT : out std_logic_vector(1 downto 0); RXDISPERR0_OUT : out std_logic_vector(1 downto 0); RXDISPERR1_OUT : out std_logic_vector(1 downto 0); RXNOTINTABLE0_OUT : out std_logic_vector(1 downto 0); RXNOTINTABLE1_OUT : out std_logic_vector(1 downto 0); ---------------------- Receive Ports - Clock Correction -------------------- RXCLKCORCNT0_OUT : out std_logic_vector(2 downto 0); RXCLKCORCNT1_OUT : out std_logic_vector(2 downto 0); --------------- Receive Ports - Comma Detection and Alignment -------------- RXENMCOMMAALIGN0_IN : in std_logic; RXENMCOMMAALIGN1_IN : in std_logic; RXENPCOMMAALIGN0_IN : in std_logic; RXENPCOMMAALIGN1_IN : in std_logic; ------------------- Receive Ports - RX Data Path interface ----------------- RXDATA0_OUT : out std_logic_vector(15 downto 0); RXDATA1_OUT : out std_logic_vector(15 downto 0); RXRESET0_IN : in std_logic; RXRESET1_IN : in std_logic; RXUSRCLK0_IN : in std_logic; RXUSRCLK1_IN : in std_logic; RXUSRCLK20_IN : in std_logic; RXUSRCLK21_IN : in std_logic; ------- Receive Ports - RX Driver,OOB signalling,Coupling and Eq.,CDR ------ GATERXELECIDLE0_IN : in std_logic; GATERXELECIDLE1_IN : in std_logic; IGNORESIGDET0_IN : in std_logic; IGNORESIGDET1_IN : in std_logic; RXELECIDLE0_OUT : out std_logic; RXELECIDLE1_OUT : out std_logic; RXN0_IN : in std_logic; RXN1_IN : in std_logic; RXP0_IN : in std_logic; RXP1_IN : in std_logic; ----------- Receive Ports - RX Elastic Buffer and Phase Alignment ---------- RXSTATUS0_OUT : out std_logic_vector(2 downto 0); RXSTATUS1_OUT : out std_logic_vector(2 downto 0); -------------- Receive Ports - RX Pipe Control for PCI Express ------------- PHYSTATUS0_OUT : out std_logic; PHYSTATUS1_OUT : out std_logic; RXVALID0_OUT : out std_logic; RXVALID1_OUT : out std_logic; -------------------- Receive Ports - RX Polarity Control ------------------- RXPOLARITY0_IN : in std_logic; RXPOLARITY1_IN : in std_logic; ---------------------------- TX/RX Datapath Ports -------------------------- GTPCLKOUT0_OUT : out std_logic_vector(1 downto 0); GTPCLKOUT1_OUT : out std_logic_vector(1 downto 0); ------------------- Transmit Ports - 8b10b Encoder Control ----------------- TXCHARDISPMODE0_IN : in std_logic_vector(1 downto 0); TXCHARDISPMODE1_IN : in std_logic_vector(1 downto 0); TXCHARISK0_IN : in std_logic_vector(1 downto 0); TXCHARISK1_IN : in std_logic_vector(1 downto 0); ------------------ Transmit Ports - TX Data Path interface ----------------- TXDATA0_IN : in std_logic_vector(15 downto 0); TXDATA1_IN : in std_logic_vector(15 downto 0); TXUSRCLK0_IN : in std_logic; TXUSRCLK1_IN : in std_logic; TXUSRCLK20_IN : in std_logic; TXUSRCLK21_IN : in std_logic; --------------- Transmit Ports - TX Driver and OOB signalling -------------- TXN0_OUT : out std_logic; TXN1_OUT : out std_logic; TXP0_OUT : out std_logic; TXP1_OUT : out std_logic; ----------------- Transmit Ports - TX Ports for PCI Express ---------------- TXDETECTRX0_IN : in std_logic; TXDETECTRX1_IN : in std_logic; TXELECIDLE0_IN : in std_logic; TXELECIDLE1_IN : in std_logic ); end GTPA1_DUAL_WRAPPER_TILE; architecture RTL of GTPA1_DUAL_WRAPPER_TILE is --**************************** Signal Declarations **************************** -- ground and tied_to_vcc_i signals signal tied_to_ground_i : std_logic; signal tied_to_ground_vec_i : std_logic_vector(63 downto 0); signal tied_to_vcc_i : std_logic; -- RX Datapath signals signal rxdata0_i : std_logic_vector(31 downto 0); signal rxchariscomma0_float_i : std_logic_vector(1 downto 0); signal rxcharisk0_float_i : std_logic_vector(1 downto 0); signal rxdisperr0_float_i : std_logic_vector(1 downto 0); signal rxnotintable0_float_i : std_logic_vector(1 downto 0); signal rxrundisp0_float_i : std_logic_vector(1 downto 0); -- TX Datapath signals signal txdata0_i : std_logic_vector(31 downto 0); signal txkerr0_float_i : std_logic_vector(1 downto 0); signal txrundisp0_float_i : std_logic_vector(1 downto 0); -- RX Datapath signals signal rxdata1_i : std_logic_vector(31 downto 0); signal rxchariscomma1_float_i : std_logic_vector(1 downto 0); signal rxcharisk1_float_i : std_logic_vector(1 downto 0); signal rxdisperr1_float_i : std_logic_vector(1 downto 0); signal rxnotintable1_float_i : std_logic_vector(1 downto 0); signal rxrundisp1_float_i : std_logic_vector(1 downto 0); -- TX Datapath signals signal txdata1_i : std_logic_vector(31 downto 0); signal txkerr1_float_i : std_logic_vector(1 downto 0); signal txrundisp1_float_i : std_logic_vector(1 downto 0); --******************************** Main Body of Code*************************** begin --------------------------- Static signal Assignments --------------------- tied_to_ground_i <= '0'; tied_to_ground_vec_i(63 downto 0) <= (others => '0'); tied_to_vcc_i <= '1'; ------------------- GTP Datapath byte mapping ----------------- -- The GTP provides little endian data (first byte received on RXDATA(7 downto 0)) RXDATA0_OUT <= rxdata0_i(15 downto 0); txdata0_i <= (tied_to_ground_vec_i(15 downto 0) & TXDATA0_IN); -- The GTP provides little endian data (first byte received on RXDATA(7 downto 0)) RXDATA1_OUT <= rxdata1_i(15 downto 0); txdata1_i <= (tied_to_ground_vec_i(15 downto 0) & TXDATA1_IN); ----------------------------- GTPA1_DUAL Instance -------------------------- gtpa1_dual_i:GTPA1_DUAL generic map ( --_______________________ Simulation-Only Attributes ___________________ SIM_RECEIVER_DETECT_PASS => (TRUE), SIM_TX_ELEC_IDLE_LEVEL => ("X"), SIM_VERSION => ("1.0"), SIM_REFCLK0_SOURCE => ("000"), SIM_REFCLK1_SOURCE => ("000"), SIM_GTPRESET_SPEEDUP => (TILE_SIM_GTPRESET_SPEEDUP), --PLL Attributes CLK25_DIVIDER_0 => (4), CLKINDC_B_0 => (TILE_CLKINDC_B_0), CLKRCV_TRST_0 => (TRUE), OOB_CLK_DIVIDER_0 => (4), PLL_COM_CFG_0 => (x"21680a"), PLL_CP_CFG_0 => (x"00"), PLL_DIVSEL_FB_0 => (5), PLL_DIVSEL_REF_0 => (2), PLL_RXDIVSEL_OUT_0 => (1), PLL_SATA_0 => (FALSE), PLL_SOURCE_0 => (TILE_PLL_SOURCE_0), PLL_TXDIVSEL_OUT_0 => (1), PLLLKDET_CFG_0 => ("111"), CLK25_DIVIDER_1 => (5), -- CLKINDC_B_1 => (TILE_CLKINDC_B_1), CLKRCV_TRST_1 => (TRUE), OOB_CLK_DIVIDER_1 => (4), PLL_COM_CFG_1 => (x"21680a"), PLL_CP_CFG_1 => (x"00"), PLL_DIVSEL_FB_1 => (2), PLL_DIVSEL_REF_1 => (1), PLL_RXDIVSEL_OUT_1 => (1), PLL_SATA_1 => (FALSE), PLL_SOURCE_1 => (TILE_PLL_SOURCE_1), PLL_TXDIVSEL_OUT_1 => (1), PLLLKDET_CFG_1 => ("111"), PMA_COM_CFG_EAST => (x"000000000"), PMA_COM_CFG_WEST => (x"000000000"), TST_ATTR_0 => (x"00000000"), TST_ATTR_1 => (x"00000000"), --TX Interface Attributes CLK_OUT_GTP_SEL_0 => ("REFCLKPLL0"), TX_TDCC_CFG_0 => ("11"), CLK_OUT_GTP_SEL_1 => ("REFCLKPLL1"), TX_TDCC_CFG_1 => ("11"), --TX Buffer and Phase Alignment Attributes PMA_TX_CFG_0 => (x"00082"), TX_BUFFER_USE_0 => (TRUE), TX_XCLK_SEL_0 => ("TXOUT"), TXRX_INVERT_0 => ("011"), PMA_TX_CFG_1 => (x"00082"), TX_BUFFER_USE_1 => (TRUE), TX_XCLK_SEL_1 => ("TXOUT"), TXRX_INVERT_1 => ("011"), --TX Driver and OOB signalling Attributes CM_TRIM_0 => ("00"), TX_IDLE_DELAY_0 => ("011"), CM_TRIM_1 => ("00"), TX_IDLE_DELAY_1 => ("011"), --TX PIPE/SATA Attributes COM_BURST_VAL_0 => ("1111"), COM_BURST_VAL_1 => ("1111"), --RX Driver,OOB signalling,Coupling and Eq,CDR Attributes AC_CAP_DIS_0 => (FALSE), OOBDETECT_THRESHOLD_0 => ("111"), PMA_CDR_SCAN_0 => (x"6404040"), PMA_RX_CFG_0 => (x"05ce048"), PMA_RXSYNC_CFG_0 => (x"00"), RCV_TERM_GND_0 => (TRUE), RCV_TERM_VTTRX_0 => (FALSE), RXEQ_CFG_0 => ("01111011"), TERMINATION_CTRL_0 => ("10100"), TERMINATION_OVRD_0 => (FALSE), TX_DETECT_RX_CFG_0 => (x"1832"), AC_CAP_DIS_1 => (FALSE), OOBDETECT_THRESHOLD_1 => ("111"), PMA_CDR_SCAN_1 => (x"6404040"), PMA_RX_CFG_1 => (x"05ce048"), PMA_RXSYNC_CFG_1 => (x"00"), RCV_TERM_GND_1 => (TRUE), RCV_TERM_VTTRX_1 => (FALSE), RXEQ_CFG_1 => ("01111011"), TERMINATION_CTRL_1 => ("10100"), TERMINATION_OVRD_1 => (FALSE), TX_DETECT_RX_CFG_1 => (x"1832"), --Comma Detection and Alignment Attributes ALIGN_COMMA_WORD_0 => (1), COMMA_10B_ENABLE_0 => ("1111111111"), DEC_MCOMMA_DETECT_0 => (TRUE), DEC_PCOMMA_DETECT_0 => (TRUE), DEC_VALID_COMMA_ONLY_0 => (TRUE), MCOMMA_10B_VALUE_0 => ("1010000011"), MCOMMA_DETECT_0 => (TRUE), PCOMMA_10B_VALUE_0 => ("0101111100"), PCOMMA_DETECT_0 => (TRUE), RX_SLIDE_MODE_0 => ("PCS"), ALIGN_COMMA_WORD_1 => (1), COMMA_10B_ENABLE_1 => ("1111111111"), DEC_MCOMMA_DETECT_1 => (TRUE), DEC_PCOMMA_DETECT_1 => (TRUE), DEC_VALID_COMMA_ONLY_1 => (TRUE), MCOMMA_10B_VALUE_1 => ("1010000011"), MCOMMA_DETECT_1 => (TRUE), PCOMMA_10B_VALUE_1 => ("0101111100"), PCOMMA_DETECT_1 => (TRUE), RX_SLIDE_MODE_1 => ("PCS"), --RX Loss-of-sync State Machine Attributes RX_LOS_INVALID_INCR_0 => (8), RX_LOS_THRESHOLD_0 => (128), RX_LOSS_OF_SYNC_FSM_0 => (FALSE), RX_LOS_INVALID_INCR_1 => (8), RX_LOS_THRESHOLD_1 => (128), RX_LOSS_OF_SYNC_FSM_1 => (FALSE), --RX Elastic Buffer and Phase alignment Attributes RX_BUFFER_USE_0 => (TRUE), RX_EN_IDLE_RESET_BUF_0 => (TRUE), RX_IDLE_HI_CNT_0 => ("1000"), RX_IDLE_LO_CNT_0 => ("0000"), RX_XCLK_SEL_0 => ("RXREC"), RX_BUFFER_USE_1 => (TRUE), RX_EN_IDLE_RESET_BUF_1 => (TRUE), RX_IDLE_HI_CNT_1 => ("1000"), RX_IDLE_LO_CNT_1 => ("0000"), RX_XCLK_SEL_1 => ("RXREC"), --Clock Correction Attributes CLK_COR_ADJ_LEN_0 => (1), CLK_COR_DET_LEN_0 => (1), CLK_COR_INSERT_IDLE_FLAG_0 => (FALSE), CLK_COR_KEEP_IDLE_0 => (FALSE), CLK_COR_MAX_LAT_0 => (20), CLK_COR_MIN_LAT_0 => (18), CLK_COR_PRECEDENCE_0 => (TRUE), CLK_COR_REPEAT_WAIT_0 => (0), CLK_COR_SEQ_1_1_0 => ("0100011100"), CLK_COR_SEQ_1_2_0 => ("0000000000"), CLK_COR_SEQ_1_3_0 => ("0000000000"), CLK_COR_SEQ_1_4_0 => ("0000000000"), CLK_COR_SEQ_1_ENABLE_0 => ("0001"), CLK_COR_SEQ_2_1_0 => ("0000000000"), CLK_COR_SEQ_2_2_0 => ("0000000000"), CLK_COR_SEQ_2_3_0 => ("0000000000"), CLK_COR_SEQ_2_4_0 => ("0000000000"), CLK_COR_SEQ_2_ENABLE_0 => ("0000"), CLK_COR_SEQ_2_USE_0 => (FALSE), CLK_CORRECT_USE_0 => (TRUE), RX_DECODE_SEQ_MATCH_0 => (TRUE), CLK_COR_ADJ_LEN_1 => (1), CLK_COR_DET_LEN_1 => (1), CLK_COR_INSERT_IDLE_FLAG_1 => (FALSE), CLK_COR_KEEP_IDLE_1 => (FALSE), CLK_COR_MAX_LAT_1 => (20), CLK_COR_MIN_LAT_1 => (18), CLK_COR_PRECEDENCE_1 => (TRUE), CLK_COR_REPEAT_WAIT_1 => (0), CLK_COR_SEQ_1_1_1 => ("0100011100"), CLK_COR_SEQ_1_2_1 => ("0000000000"), CLK_COR_SEQ_1_3_1 => ("0000000000"), CLK_COR_SEQ_1_4_1 => ("0000000000"), CLK_COR_SEQ_1_ENABLE_1 => ("0001"), CLK_COR_SEQ_2_1_1 => ("0000000000"), CLK_COR_SEQ_2_2_1 => ("0000000000"), CLK_COR_SEQ_2_3_1 => ("0000000000"), CLK_COR_SEQ_2_4_1 => ("0000000000"), CLK_COR_SEQ_2_ENABLE_1 => ("0000"), CLK_COR_SEQ_2_USE_1 => (FALSE), CLK_CORRECT_USE_1 => (TRUE), RX_DECODE_SEQ_MATCH_1 => (TRUE), --Channel Bonding Attributes CHAN_BOND_1_MAX_SKEW_0 => (1), CHAN_BOND_2_MAX_SKEW_0 => (1), CHAN_BOND_KEEP_ALIGN_0 => (FALSE), CHAN_BOND_SEQ_1_1_0 => ("0001001010"), CHAN_BOND_SEQ_1_2_0 => ("0001001010"), CHAN_BOND_SEQ_1_3_0 => ("0001001010"), CHAN_BOND_SEQ_1_4_0 => ("0110111100"), CHAN_BOND_SEQ_1_ENABLE_0 => ("0000"), CHAN_BOND_SEQ_2_1_0 => ("0100111100"), CHAN_BOND_SEQ_2_2_0 => ("0100111100"), CHAN_BOND_SEQ_2_3_0 => ("0110111100"), CHAN_BOND_SEQ_2_4_0 => ("0100011100"), CHAN_BOND_SEQ_2_ENABLE_0 => ("0000"), CHAN_BOND_SEQ_2_USE_0 => (FALSE), CHAN_BOND_SEQ_LEN_0 => (1), RX_EN_MODE_RESET_BUF_0 => (FALSE), CHAN_BOND_1_MAX_SKEW_1 => (1), CHAN_BOND_2_MAX_SKEW_1 => (1), CHAN_BOND_KEEP_ALIGN_1 => (FALSE), CHAN_BOND_SEQ_1_1_1 => ("0001001010"), CHAN_BOND_SEQ_1_2_1 => ("0001001010"), CHAN_BOND_SEQ_1_3_1 => ("0001001010"), CHAN_BOND_SEQ_1_4_1 => ("0110111100"), CHAN_BOND_SEQ_1_ENABLE_1 => ("0000"), CHAN_BOND_SEQ_2_1_1 => ("0100111100"), CHAN_BOND_SEQ_2_2_1 => ("0100111100"), CHAN_BOND_SEQ_2_3_1 => ("0110111100"), CHAN_BOND_SEQ_2_4_1 => ("0100011100"), CHAN_BOND_SEQ_2_ENABLE_1 => ("0000"), CHAN_BOND_SEQ_2_USE_1 => (FALSE), CHAN_BOND_SEQ_LEN_1 => (1), RX_EN_MODE_RESET_BUF_1 => (FALSE), --RX PCI Express Attributes CB2_INH_CC_PERIOD_0 => (8), CDR_PH_ADJ_TIME_0 => ("01010"), PCI_EXPRESS_MODE_0 => (TRUE), RX_EN_IDLE_HOLD_CDR_0 => (TRUE), RX_EN_IDLE_RESET_FR_0 => (TRUE), RX_EN_IDLE_RESET_PH_0 => (TRUE), RX_STATUS_FMT_0 => ("PCIE"), TRANS_TIME_FROM_P2_0 => (x"03c"), TRANS_TIME_NON_P2_0 => (x"19"), TRANS_TIME_TO_P2_0 => (x"064"), CB2_INH_CC_PERIOD_1 => (8), CDR_PH_ADJ_TIME_1 => ("01010"), PCI_EXPRESS_MODE_1 => (TRUE), RX_EN_IDLE_HOLD_CDR_1 => (TRUE), RX_EN_IDLE_RESET_FR_1 => (TRUE), RX_EN_IDLE_RESET_PH_1 => (TRUE), RX_STATUS_FMT_1 => ("PCIE"), TRANS_TIME_FROM_P2_1 => (x"03c"), TRANS_TIME_NON_P2_1 => (x"19"), TRANS_TIME_TO_P2_1 => (x"064"), --RX SATA Attributes SATA_BURST_VAL_0 => ("100"), SATA_IDLE_VAL_0 => ("100"), SATA_MAX_BURST_0 => (9), SATA_MAX_INIT_0 => (27), SATA_MAX_WAKE_0 => (9), SATA_MIN_BURST_0 => (5), SATA_MIN_INIT_0 => (15), SATA_MIN_WAKE_0 => (5), SATA_BURST_VAL_1 => ("100"), SATA_IDLE_VAL_1 => ("100"), SATA_MAX_BURST_1 => (9), SATA_MAX_INIT_1 => (27), SATA_MAX_WAKE_1 => (9), SATA_MIN_BURST_1 => (5), SATA_MIN_INIT_1 => (15), SATA_MIN_WAKE_1 => (5) ) port map ( ------------------------ Loopback and Powerdown Ports ---------------------- LOOPBACK0 => tied_to_ground_vec_i(2 downto 0), LOOPBACK1 => tied_to_ground_vec_i(2 downto 0), RXPOWERDOWN0 => RXPOWERDOWN0_IN, RXPOWERDOWN1 => RXPOWERDOWN1_IN, TXPOWERDOWN0 => TXPOWERDOWN0_IN, TXPOWERDOWN1 => TXPOWERDOWN1_IN, --------------------------------- PLL Ports -------------------------------- CLK00 => CLK00_IN, CLK01 => CLK01_IN, CLK10 => tied_to_ground_i, CLK11 => tied_to_ground_i, CLKINEAST0 => tied_to_ground_i, CLKINEAST1 => tied_to_ground_i, CLKINWEST0 => tied_to_ground_i, CLKINWEST1 => tied_to_ground_i, GCLK00 => tied_to_ground_i, GCLK01 => tied_to_ground_i, GCLK10 => tied_to_ground_i, GCLK11 => tied_to_ground_i, GTPRESET0 => GTPRESET0_IN, GTPRESET1 => GTPRESET1_IN, GTPTEST0 => "00010000", GTPTEST1 => "00010000", INTDATAWIDTH0 => tied_to_vcc_i, INTDATAWIDTH1 => tied_to_vcc_i, PLLCLK00 => tied_to_ground_i, PLLCLK01 => tied_to_ground_i, PLLCLK10 => tied_to_ground_i, PLLCLK11 => tied_to_ground_i, PLLLKDET0 => PLLLKDET0_OUT, PLLLKDET1 => PLLLKDET1_OUT, PLLLKDETEN0 => tied_to_vcc_i, PLLLKDETEN1 => tied_to_vcc_i, PLLPOWERDOWN0 => tied_to_ground_i, PLLPOWERDOWN1 => tied_to_ground_i, REFCLKOUT0 => open, REFCLKOUT1 => open, REFCLKPLL0 => open, REFCLKPLL1 => open, REFCLKPWRDNB0 => tied_to_vcc_i, REFCLKPWRDNB1 => tied_to_vcc_i, REFSELDYPLL0 => tied_to_ground_vec_i(2 downto 0), REFSELDYPLL1 => tied_to_ground_vec_i(2 downto 0), RESETDONE0 => RESETDONE0_OUT, RESETDONE1 => RESETDONE1_OUT, TSTCLK0 => tied_to_ground_i, TSTCLK1 => tied_to_ground_i, TSTIN0 => tied_to_ground_vec_i(11 downto 0), TSTIN1 => tied_to_ground_vec_i(11 downto 0), TSTOUT0 => open, TSTOUT1 => open, ----------------------- Receive Ports - 8b10b Decoder ---------------------- RXCHARISCOMMA0 => open, RXCHARISCOMMA1 => open, RXCHARISK0(3 downto 2) => rxcharisk0_float_i, RXCHARISK0(1 downto 0) => RXCHARISK0_OUT, RXCHARISK1(3 downto 2) => rxcharisk1_float_i, RXCHARISK1(1 downto 0) => RXCHARISK1_OUT, RXDEC8B10BUSE0 => tied_to_vcc_i, RXDEC8B10BUSE1 => tied_to_vcc_i, RXDISPERR0(3 downto 2) => rxdisperr0_float_i, RXDISPERR0(1 downto 0) => RXDISPERR0_OUT, RXDISPERR1(3 downto 2) => rxdisperr1_float_i, RXDISPERR1(1 downto 0) => RXDISPERR1_OUT, RXNOTINTABLE0(3 downto 2) => rxnotintable0_float_i, RXNOTINTABLE0(1 downto 0) => RXNOTINTABLE0_OUT, RXNOTINTABLE1(3 downto 2) => rxnotintable1_float_i, RXNOTINTABLE1(1 downto 0) => RXNOTINTABLE1_OUT, RXRUNDISP0 => open, RXRUNDISP1 => open, USRCODEERR0 => tied_to_ground_i, USRCODEERR1 => tied_to_ground_i, ---------------------- Receive Ports - Channel Bonding --------------------- RXCHANBONDSEQ0 => open, RXCHANBONDSEQ1 => open, RXCHANISALIGNED0 => open, RXCHANISALIGNED1 => open, RXCHANREALIGN0 => open, RXCHANREALIGN1 => open, RXCHBONDI => tied_to_ground_vec_i(2 downto 0), RXCHBONDMASTER0 => tied_to_ground_i, RXCHBONDMASTER1 => tied_to_ground_i, RXCHBONDO => open, RXCHBONDSLAVE0 => tied_to_ground_i, RXCHBONDSLAVE1 => tied_to_ground_i, RXENCHANSYNC0 => tied_to_ground_i, RXENCHANSYNC1 => tied_to_ground_i, ---------------------- Receive Ports - Clock Correction -------------------- RXCLKCORCNT0 => RXCLKCORCNT0_OUT, RXCLKCORCNT1 => RXCLKCORCNT1_OUT, --------------- Receive Ports - Comma Detection and Alignment -------------- RXBYTEISALIGNED0 => open, RXBYTEISALIGNED1 => open, RXBYTEREALIGN0 => open, RXBYTEREALIGN1 => open, RXCOMMADET0 => open, RXCOMMADET1 => open, RXCOMMADETUSE0 => tied_to_vcc_i, RXCOMMADETUSE1 => tied_to_vcc_i, RXENMCOMMAALIGN0 => RXENMCOMMAALIGN0_IN, RXENMCOMMAALIGN1 => RXENMCOMMAALIGN1_IN, RXENPCOMMAALIGN0 => RXENPCOMMAALIGN0_IN, RXENPCOMMAALIGN1 => RXENPCOMMAALIGN1_IN, RXSLIDE0 => tied_to_ground_i, RXSLIDE1 => tied_to_ground_i, ----------------------- Receive Ports - PRBS Detection --------------------- PRBSCNTRESET0 => tied_to_ground_i, PRBSCNTRESET1 => tied_to_ground_i, RXENPRBSTST0 => tied_to_ground_vec_i(2 downto 0), RXENPRBSTST1 => tied_to_ground_vec_i(2 downto 0), RXPRBSERR0 => open, RXPRBSERR1 => open, ------------------- Receive Ports - RX Data Path interface ----------------- RXDATA0 => rxdata0_i, RXDATA1 => rxdata1_i, RXDATAWIDTH0 => "01", RXDATAWIDTH1 => "01", RXRECCLK0 => open, RXRECCLK1 => open, RXRESET0 => RXRESET0_IN, RXRESET1 => RXRESET1_IN, RXUSRCLK0 => RXUSRCLK0_IN, RXUSRCLK1 => RXUSRCLK1_IN, RXUSRCLK20 => RXUSRCLK20_IN, RXUSRCLK21 => RXUSRCLK21_IN, ------- Receive Ports - RX Driver,OOB signalling,Coupling and Eq.,CDR ------ GATERXELECIDLE0 => GATERXELECIDLE0_IN, GATERXELECIDLE1 => GATERXELECIDLE1_IN, IGNORESIGDET0 => IGNORESIGDET0_IN, IGNORESIGDET1 => IGNORESIGDET1_IN, RCALINEAST => tied_to_ground_vec_i(4 downto 0), RCALINWEST => tied_to_ground_vec_i(4 downto 0), RCALOUTEAST => open, RCALOUTWEST => open, RXCDRRESET0 => tied_to_ground_i, RXCDRRESET1 => tied_to_ground_i, RXELECIDLE0 => RXELECIDLE0_OUT, RXELECIDLE1 => RXELECIDLE1_OUT, RXEQMIX0 => "11", RXEQMIX1 => "11", RXN0 => RXN0_IN, RXN1 => RXN1_IN, RXP0 => RXP0_IN, RXP1 => RXP1_IN, ----------- Receive Ports - RX Elastic Buffer and Phase Alignment ---------- RXBUFRESET0 => tied_to_ground_i, RXBUFRESET1 => tied_to_ground_i, RXBUFSTATUS0 => open, RXBUFSTATUS1 => open, RXENPMAPHASEALIGN0 => tied_to_ground_i, RXENPMAPHASEALIGN1 => tied_to_ground_i, RXPMASETPHASE0 => tied_to_ground_i, RXPMASETPHASE1 => tied_to_ground_i, RXSTATUS0 => RXSTATUS0_OUT, RXSTATUS1 => RXSTATUS1_OUT, --------------- Receive Ports - RX Loss-of-sync State Machine -------------- RXLOSSOFSYNC0 => open, RXLOSSOFSYNC1 => open, -------------- Receive Ports - RX Pipe Control for PCI Express ------------- PHYSTATUS0 => PHYSTATUS0_OUT, PHYSTATUS1 => PHYSTATUS1_OUT, RXVALID0 => RXVALID0_OUT, RXVALID1 => RXVALID1_OUT, -------------------- Receive Ports - RX Polarity Control ------------------- RXPOLARITY0 => RXPOLARITY0_IN, RXPOLARITY1 => RXPOLARITY1_IN, ------------- Shared Ports - Dynamic Reconfiguration Port (DRP) ------------ DADDR => tied_to_ground_vec_i(7 downto 0), DCLK => tied_to_ground_i, DEN => tied_to_ground_i, DI => tied_to_ground_vec_i(15 downto 0), DRDY => open, DRPDO => open, DWE => tied_to_ground_i, ---------------------------- TX/RX Datapath Ports -------------------------- GTPCLKFBEAST => open, GTPCLKFBSEL0EAST => "10", GTPCLKFBSEL0WEST => "00", GTPCLKFBSEL1EAST => "11", GTPCLKFBSEL1WEST => "01", GTPCLKFBWEST => open, GTPCLKOUT0 => GTPCLKOUT0_OUT, GTPCLKOUT1 => GTPCLKOUT1_OUT, ------------------- Transmit Ports - 8b10b Encoder Control ----------------- TXBYPASS8B10B0 => tied_to_ground_vec_i(3 downto 0), TXBYPASS8B10B1 => tied_to_ground_vec_i(3 downto 0), TXCHARDISPMODE0(3 downto 2) => tied_to_ground_vec_i(1 downto 0), TXCHARDISPMODE0(1 downto 0) => TXCHARDISPMODE0_IN, TXCHARDISPMODE1(3 downto 2) => tied_to_ground_vec_i(1 downto 0), TXCHARDISPMODE1(1 downto 0) => TXCHARDISPMODE1_IN, TXCHARDISPVAL0 => tied_to_ground_vec_i(3 downto 0), TXCHARDISPVAL1 => tied_to_ground_vec_i(3 downto 0), TXCHARISK0(3 downto 2) => tied_to_ground_vec_i(1 downto 0), TXCHARISK0(1 downto 0) => TXCHARISK0_IN, TXCHARISK1(3 downto 2) => tied_to_ground_vec_i(1 downto 0), TXCHARISK1(1 downto 0) => TXCHARISK1_IN, TXENC8B10BUSE0 => tied_to_vcc_i, TXENC8B10BUSE1 => tied_to_vcc_i, TXKERR0 => open, TXKERR1 => open, TXRUNDISP0 => open, TXRUNDISP1 => open, --------------- Transmit Ports - TX Buffer and Phase Alignment ------------- TXBUFSTATUS0 => open, TXBUFSTATUS1 => open, TXENPMAPHASEALIGN0 => tied_to_ground_i, TXENPMAPHASEALIGN1 => tied_to_ground_i, TXPMASETPHASE0 => tied_to_ground_i, TXPMASETPHASE1 => tied_to_ground_i, ------------------ Transmit Ports - TX Data Path interface ----------------- TXDATA0 => txdata0_i, TXDATA1 => txdata1_i, TXDATAWIDTH0 => "01", TXDATAWIDTH1 => "01", TXOUTCLK0 => open, TXOUTCLK1 => open, TXRESET0 => tied_to_ground_i, TXRESET1 => tied_to_ground_i, TXUSRCLK0 => TXUSRCLK0_IN, TXUSRCLK1 => TXUSRCLK1_IN, TXUSRCLK20 => TXUSRCLK20_IN, TXUSRCLK21 => TXUSRCLK21_IN, --------------- Transmit Ports - TX Driver and OOB signalling -------------- TXBUFDIFFCTRL0 => "101", TXBUFDIFFCTRL1 => "101", TXDIFFCTRL0 => "0111", TXDIFFCTRL1 => "0111", TXINHIBIT0 => tied_to_ground_i, TXINHIBIT1 => tied_to_ground_i, TXN0 => TXN0_OUT, TXN1 => TXN1_OUT, TXP0 => TXP0_OUT, TXP1 => TXP1_OUT, TXPREEMPHASIS0 => "100", TXPREEMPHASIS1 => "100", --------------------- Transmit Ports - TX PRBS Generator ------------------- TXENPRBSTST0 => tied_to_ground_vec_i(2 downto 0), TXENPRBSTST1 => tied_to_ground_vec_i(2 downto 0), TXPRBSFORCEERR0 => tied_to_ground_i, TXPRBSFORCEERR1 => tied_to_ground_i, -------------------- Transmit Ports - TX Polarity Control ------------------ TXPOLARITY0 => tied_to_ground_i, TXPOLARITY1 => tied_to_ground_i, ----------------- Transmit Ports - TX Ports for PCI Express ---------------- TXDETECTRX0 => TXDETECTRX0_IN, TXDETECTRX1 => TXDETECTRX1_IN, TXELECIDLE0 => TXELECIDLE0_IN, TXELECIDLE1 => TXELECIDLE1_IN, TXPDOWNASYNCH0 => tied_to_ground_i, TXPDOWNASYNCH1 => tied_to_ground_i, --------------------- Transmit Ports - TX Ports for SATA ------------------- TXCOMSTART0 => tied_to_ground_i, TXCOMSTART1 => tied_to_ground_i, TXCOMTYPE0 => tied_to_ground_i, TXCOMTYPE1 => tied_to_ground_i ); end RTL;
Go to most recent revision | Compare with Previous | Blame | View Log