Subversion Repositories pcie_sg_dma

<?xml version="1.0" encoding="UTF-8"?>
<!-- IMPORTANT: This is an internal file that has been generated
     by the Xilinx ISE software.  Any direct editing or
     changes made to this file may result in unpredictable
     behavior or data corruption.  It is strongly advised that
     users do not edit the contents of this file. -->
<messages>
<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 986: Assignment to <arg fmt="%s" index="1">to_register10_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 987: Assignment to <arg fmt="%s" index="1">to_register11_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 988: Assignment to <arg fmt="%s" index="1">to_register12_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 989: Assignment to <arg fmt="%s" index="1">to_register13_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 990: Assignment to <arg fmt="%s" index="1">to_register14_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 991: Assignment to <arg fmt="%s" index="1">to_register15_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 992: Assignment to <arg fmt="%s" index="1">to_register16_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 993: Assignment to <arg fmt="%s" index="1">to_register17_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 994: Assignment to <arg fmt="%s" index="1">to_register18_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 995: Assignment to <arg fmt="%s" index="1">to_register19_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 996: Assignment to <arg fmt="%s" index="1">to_register1_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 997: Assignment to <arg fmt="%s" index="1">to_register20_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 998: Assignment to <arg fmt="%s" index="1">to_register21_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 999: Assignment to <arg fmt="%s" index="1">to_register22_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1000: Assignment to <arg fmt="%s" index="1">to_register23_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1001: Assignment to <arg fmt="%s" index="1">to_register24_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1002: Assignment to <arg fmt="%s" index="1">to_register25_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1003: Assignment to <arg fmt="%s" index="1">to_register26_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1004: Assignment to <arg fmt="%s" index="1">to_register27_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1005: Assignment to <arg fmt="%s" index="1">to_register28_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1006: Assignment to <arg fmt="%s" index="1">to_register29_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1007: Assignment to <arg fmt="%s" index="1">to_register2_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1008: Assignment to <arg fmt="%s" index="1">to_register30_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1009: Assignment to <arg fmt="%s" index="1">to_register31_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1010: Assignment to <arg fmt="%s" index="1">to_register32_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1011: Assignment to <arg fmt="%s" index="1">to_register33_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1012: Assignment to <arg fmt="%s" index="1">to_register34_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1013: Assignment to <arg fmt="%s" index="1">to_register3_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1014: Assignment to <arg fmt="%s" index="1">to_register4_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1015: Assignment to <arg fmt="%s" index="1">to_register5_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1016: Assignment to <arg fmt="%s" index="1">to_register6_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1017: Assignment to <arg fmt="%s" index="1">to_register7_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1018: Assignment to <arg fmt="%s" index="1">to_register8_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="1127" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic_cw.vhd" Line 1019: Assignment to <arg fmt="%s" index="1">to_register9_dout_net</arg> ignored, since the identifier is never used
</msg>

<msg type="warning" file="HDLCompiler" num="89" delta="new" >"C:\Temp\Xilinx PCI Express\ML605_ISE13.3\MyUserLogic\UserLogic_00\top_level_0_PCIe_UserLogic_00_INOUT_LOGIC\synth_model\inout_logic.vhd" Line 1727: &lt;<arg fmt="%s" index="1">fdre</arg>&gt; remains a black-box since it has no binding entity.
</msg>

<msg type="warning" file="Xst" num="37" delta="new" >Detected unknown constraint/property &quot;<arg fmt="%s" index="1">preserve_signal</arg>&quot;. This constraint/property is not supported by the current software release and will be ignored.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register10_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register11_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register12_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register13_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register14_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register15_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register16_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register17_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register18_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register19_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register1_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register20_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register21_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register22_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register23_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register24_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register25_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register26_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register27_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register28_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register29_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register2_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register30_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register31_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register32_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register33_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register34_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register3_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register4_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register5_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register6_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register7_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register8_dout&lt;0:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">to_register9_dout&lt;31:0&gt;</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">ce</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="info" file="Xst" num="3210" delta="new" >&quot;<arg fmt="%s" index="1">c:/temp/xilinx pci express/ml605_ise13.3/myuserlogic/userlogic_00/top_level_0_pcie_userlogic_00_inout_logic/synth_model/inout_logic_cw.vhd</arg>&quot; line <arg fmt="%s" index="2">378</arg>: Output port &lt;<arg fmt="%s" index="3">clr</arg>&gt; of the instance &lt;<arg fmt="%s" index="4">xlclockdriver</arg>&gt; is unconnected or connected to loadless signal.
</msg>

<msg type="info" file="Xst" num="3210" delta="new" >&quot;<arg fmt="%s" index="1">c:/temp/xilinx pci express/ml605_ise13.3/myuserlogic/userlogic_00/top_level_0_pcie_userlogic_00_inout_logic/synth_model/inout_logic_cw.vhd</arg>&quot; line <arg fmt="%s" index="2">378</arg>: Output port &lt;<arg fmt="%s" index="3">ce_logic</arg>&gt; of the instance &lt;<arg fmt="%s" index="4">xlclockdriver</arg>&gt; is unconnected or connected to loadless signal.
</msg>

<msg type="info" file="Xst" num="3210" delta="new" >&quot;<arg fmt="%s" index="1">c:/temp/xilinx pci express/ml605_ise13.3/myuserlogic/userlogic_00/top_level_0_pcie_userlogic_00_inout_logic/synth_model/inout_logic_cw.vhd</arg>&quot; line <arg fmt="%s" index="2">254</arg>: Output port &lt;<arg fmt="%s" index="3">o</arg>&gt; of the instance &lt;<arg fmt="%s" index="4">clr_reg</arg>&gt; is unconnected or connected to loadless signal.
</msg>

<msg type="warning" file="Xst" num="37" delta="new" >Detected unknown constraint/property &quot;<arg fmt="%s" index="1">fpga_dont_touch</arg>&quot;. This constraint/property is not supported by the current software release and will be ignored.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">clk</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">ce</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="647" delta="new" >Input &lt;<arg fmt="%s" index="1">clr</arg>&gt; is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.
</msg>

<msg type="warning" file="Xst" num="1989" delta="new" >Unit &lt;<arg fmt="%s" index="1">inout_logic</arg>&gt;: instances &lt;<arg fmt="%s" index="2">constant1</arg>&gt;, &lt;<arg fmt="%s" index="3">constant5</arg>&gt; of unit &lt;<arg fmt="%s" index="4">constant_6293007044</arg>&gt; are equivalent, second instance is removed
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="warning" file="Xst" num="1710" delta="new" >FF/Latch &lt;<arg fmt="%s" index="1">default_clock_driver_x0/xlclockdriver_1/clr_reg/latency_gt_0.fd_array[1].reg_comp/fd_prim_array[0].bit_is_0.fdre_comp</arg>&gt; (without init value) has a constant value of <arg fmt="%d" index="2">0</arg> in block &lt;<arg fmt="%s" index="3">inout_logic_cw</arg>&gt;. This FF/Latch will be trimmed during the optimization process.
</msg>

<msg type="info" file="Xst" num="2169" delta="new" >HDL ADVISOR - Some clock signals were not automatically buffered by XST with BUFG/BUFR resources. Please use the buffer_type constraint in order to insert these buffers to the clock signals to help prevent skew problems.
</msg>

</messages>