URL
https://opencores.org/ocsvn/phr/phr/trunk
Subversion Repositories phr
[/] [phr/] [trunk/] [doc/] [informe-tesis/] [template/] [Ucalgary/] [thes12.clo] - Rev 35
Go to most recent revision | Compare with Previous | Blame | View Log
% UNIVERSITY OF CALGARY THESIS DOCUMENT CLASS OPTION -- thes12.clo 98/03/01
% for LaTeX version 2e
% Modified N. Mancell 98/03/01 formerly thes12.sty
% Modified (thes12.sty) D.Teale 92-09-23 To fix typeout for altchapter
% ****************************************
% * FONTS *
% ****************************************
%
\lineskip 1pt % \lineskip is 1pt for all font sizes.
\normallineskip 1pt
\def\baselinestretch{1}
% All font selection commands have been revised to conform with
% Latex2e font selection commands (NM 98/03/01).
%
% Each size-changing command \SIZE executes the command
% \fontsize\@FONTSIZE{BASELINESKIP}\selectfont
% where:
% BASELINESKIP = Normal value of \baselineskip for that size. (Actual
% value will be \baselinestretch * BASELINESKIP.)
%
% \@FONTSIZE = Name of font-size command. The currently available
% (preloaded) font sizes are: \@vpt (5pt), \@vipt (6pt),
% \@viipt (etc.), \@viiipt, \@ixpt, \@xpt, \@xipt, \@xiipt,
% \@xivpt, \@xviipt, \@xxpt, \@xxvpt. These are defined
% ltfss.dtx.
%
% For reasons of efficiency that needn't concern the designer,
% the document style defines \@normalsize instead of \normalsize . This is
% done only for \normalsize, not for any other size-changing commands.
%\renewcommand{\normalsize}{\fontsize\@xiipt{14.5}\selectfont% (nm2007)
\renewcommand{\normalsize}{\fontsize{12pt}{14.5pt}\selectfont %(nm2007 added)
\abovedisplayskip 12\p@ plus3\p@ minus7\p@
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip \z@ plus3\p@
\belowdisplayshortskip 6.5\p@ plus3.5\p@ minus3\p@}
\newcommand{\small}{\fontsize\@xipt{13.6}\selectfont%
\abovedisplayskip 11\p@ plus3\p@ minus6\p@
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip \z@ plus3\p@
\belowdisplayshortskip 6.5\p@ plus3.5\p@ minus3\p@
\def\@listi{\parsep 4.5\p@ plus 2\p@ minus 1\p@
\itemsep \parsep
\topsep 9\p@ plus 3\p@ minus 5\p@}}
\newcommand{\footnotesize}{\fontsize\@xpt{12}\selectfont%
\abovedisplayskip 10\p@ plus2\p@ minus5\p@
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip \z@ plus3\p@
\belowdisplayshortskip 6\p@ plus3\p@ minus3\p@
\def\@listi{\topsep 6\p@ plus 2\p@ minus 2\p@\parsep 3\p@ plus 2\p@ minus 1\p@
\itemsep \parsep}}
\newcommand{\scriptsize}{\fontsize\@viiipt{9.5pt}\selectfont}
\newcommand{\tiny}{\fontsize\@vipt{7pt}\selectfont}
\newcommand{\large}{\fontsize\@xivpt{18pt}\selectfont}
\newcommand{\Large}{\fontsize\@xviipt{22pt}\selectfont}
\newcommand{\LARGE}{\fontsize\@xxpt{25pt}\selectfont}
\newcommand{\huge}{\fontsize\@xxvpt{30pt}\selectfont}
\newcommand{\Huge}{\fontsizelet\@xxvpt{30pt}\selectfont}
% The shortform font selection commands are not defined in LaTeX2e.
% This defines them so that they do non-orthogonal font selection,
% which is useful if you are in the middle of converting a document
% from 2.09. These commands are no longer used internally in this
% class. (NM 98/03/01)
\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
\DeclareOldFontCommand{\sf}{\normalfont\sfffamily}{\mathsf}
\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
\newcommand{\sl}{\slshape}
\newcommand{\sc}{\scshape}
\normalsize % Choose the normalsize font.
% ****************************************
% * PAGE LAYOUT *
% ****************************************
%
% All margin dimensions measured from a point one inch from top and side
% of page.
% SIDE MARGINS:
\if@twoside % Values for two-sided printing:
\oddsidemargin 21pt % Left margin on odd-numbered pages.
\evensidemargin 59pt % Left margin on even-numbered pages.
\marginparwidth 85pt % Width of marginal notes.
\else % Values for one-sided printing:
\oddsidemargin 39.5pt % Note that \oddsidemargin = \evensidemargin
\evensidemargin 39.5pt
\marginparwidth 68pt
\fi
\marginparsep 10pt % Horizontal space between outer margin and
% marginal note
% VERTICAL SPACING:
% Top of page:
\topmargin 0pt % Nominal distance from top of page to top of
% box containing running head.
\headheight 12pt % Height of box containing running head.
\headsep 25pt % Space between running head and text.
% \topskip = 10pt % '\baselineskip' for first line of page.
% Bottom of page:
%\footheight 12pt % (NM 98/03/01)Height of box containing
% running foot.
\footskip 30pt % Distance from baseline of box containing foot
% to baseline of last line of text.
% DIMENSION OF TEXT:
\textheight 580.5pt % Height of text (including footnotes and figures,
% excluding running head and foot).
\textwidth 429.5pt % Width of text line.
% For two-column mode:
\columnsep 10pt % Space between columns
\columnseprule 0pt % Width of rule between columns.
% A \raggedbottom command causes 'ragged bottom' pages: pages set to
% natural height instead of being stretched to exactly \textheight.
% FOOTNOTES:
\footnotesep 8.4pt % Height of strut placed at the beginning of every
% footnote = height of normal \footnotesize strut,
% so no extra space between footnotes.
\skip\footins 10.8pt plus 4pt minus 2pt % Space between last line of text and
% top of first footnote.
% FLOATS: (a float is something like a figure or table)
%
% FOR FLOATS ON A TEXT PAGE:
%
% ONE-COLUMN MODE OR SINGLE-COLUMN FLOATS IN TWO-COLUMN MODE:
\floatsep 14pt plus 2pt minus 4pt % Space between adjacent floats moved
% to top or bottom of text page.
\textfloatsep 20pt plus 2pt minus 4pt % Space between main text and floats
% at top or bottom of page.
\intextsep 14pt plus 4pt minus 4pt % Space between in-text figures and
% text.
%\@maxsep 20pt % (NM 98/03/01)The maximum of
%\floatsep,
% \textfloatsep and \intextsep (minus
% the stretch and shrink).
% TWO-COLUMN FLOATS IN TWO-COLUMN MODE:
\dblfloatsep 14pt plus 2pt minus 4pt % Same as \floatsep for double-column
% figures in two-column mode.
\dbltextfloatsep 20pt plus 2pt minus 4pt % \textfloatsep for double-column
% floats.
%\@dblmaxsep 20pt % (NM98/03/01)The maximum of
% \dblfloatsep and
% \dbltexfloatsep.
% FOR FLOATS ON A SEPARATE FLOAT PAGE OR COLUMN:
% ONE-COLUMN MODE OR SINGLE-COLUMN FLOATS IN TWO-COLUMN MODE:
\@fptop 0pt plus 1fil % Stretch at top of float page/column. (Must be
% 0pt plus ...)
\@fpsep 10pt plus 2fil % Space between floats on float page/column.
\@fpbot 0pt plus 1fil % Stretch at bottom of float page/column. (Must be
% 0pt plus ... )
% DOUBLE-COLUMN FLOATS IN TWO-COLUMN MODE.
\@dblfptop 0pt plus 1fil % Stretch at top of float page. (Must be 0pt plus ...)
\@dblfpsep 10pt plus 2fil % Space between floats on float page.
\@dblfpbot 0pt plus 1fil % Stretch at bottom of float page. (Must be
% 0pt plus ... )
% MARGINAL NOTES:
%
\marginparpush 7pt % Minimum vertical separation between two marginal
% notes.
% ****************************************
% * PARAGRAPHING *
% ****************************************
%
\parskip 0pt plus 1pt % Extra vertical space between paragraphs.
\parindent 1.5em % Width of paragraph indentation.
\topsep 10pt plus 4pt minus 6pt % Extra vertical space, in addition to
% \parskip, added above and below list and
% paragraphing environments.
\partopsep 3pt plus 2pt minus 2pt % Extra vertical space, in addition to
% \parskip and \topsep, added when user
% leaves blank line before environment.
\itemsep 5pt plus 2.5pt minus 1pt % Extra vertical space, in addition to
% \parskip, added between list items.
% The following page-breaking penalties are defined
\@lowpenalty 51 % Produced by \nopagebreak[1] or \nolinebreak[1]
\@medpenalty 151 % Produced by \nopagebreak[2] or \nolinebreak[2]
\@highpenalty 301 % Produced by \nopagebreak[3] or \nolinebreak[3]
\@beginparpenalty -\@lowpenalty % Before a list or paragraph environment.
\@endparpenalty -\@lowpenalty % After a list or paragraph environment.
\@itempenalty -\@lowpenalty % Between list items.
% \clubpenalty % 'Club line' at bottom of page.
% \widowpenalty % 'Widow line' at top of page.
% \displaywidowpenalty % Math display widow line.
% \predisplaypenalty % Breaking before a math display.
% \postdisplaypenalty % Breaking after a math display.
% \interlinepenalty % Breaking at a line within a paragraph.
% \brokenpenalty % Breaking after a hyphenated line.
% ****************************************
% * CHAPTERS AND SECTIONS *
% ****************************************
%
% \sty@SECTION{#1}{#2} is defined to be the type, size, placement of section titles
\def\setsectionstyle#1#2{\@ifundefined{sty@#1}%
{\@warning{sectionstyle `\string#1' on page \thepage \space undefined}}%
{\@namedef{sty@#1}{#2}}}
%{\edef\@tempsty{\@nameuse{sty@#1}}\show\@tempsty%
%\let\@tempstya\@tempsty\show\@tempstya\@namedef{sty@#1}{\@nameuse{@tempstya}#2}}}
% initialization of \sty@SECTION
\def\sty@chapter{\Large\centering} %removed \bfseries 2006nm
\def\sty@section{\large} %removed \bfseries 2006nm
\def\sty@subsection{\normalsize} %removed \bfseries 2006nm
\def\sty@subsubsection{\normalsize} %removed \bfseries after \normalsize 2006nm
\def\sty@paragraph{\normalsize} %removed \bfseries 2006nm
\def\sty@subparagraph{\normalsize} %removed \bfseries 2006nm
\def\part{\cleardoublepage % Starts new page.
\thispagestyle{plain} % Page style of part page is 'plain'
\if@twocolumn % IF two-column style
\onecolumn % THEN \onecolumn
\@tempswatrue % @tempswa := true
\else \@tempswafalse % ELSE @tempswa := false
\fi % FI
\hbox{}\vfil % Add fil glue to center title
\bgroup \centering % BEGIN centering
\secdef\@part\@spart}
\def\@part[#1]#2{\ifnum \c@secnumdepth >-2\relax % IF secnumdepth > -2
\refstepcounter{part} % THEN step part counter
\addcontentsline{toc}{part}{\thepart % add toc line
\hspace{1em}#1}\else % ELSE add unnumbered line
\addcontentsline{toc}{part}{#1}\fi % FI
\markboth{}{}
\ifnum \c@secnumdepth >-2\relax % IF secnumdepth > -2
\huge\bf Part \thepart % THEN Print 'Part' and number
\par % in \huge bold.
\vskip 20pt \fi % Add space before title.
\Huge \bfseries % FI
#1\@endpart} % Print Title in \Huge bold.
% \@endpart finishes the part page
%
\def\@endpart{\par\egroup % END centering
\vfil\newpage % End page with 1fil glue.
\if@twoside % IF twoside printing
\hbox{} % THEN Produce totally blank page
\thispagestyle{empty}
\newpage
\fi % FI
\if@tempswa % IF @tempswa = true
\twocolumn % THEN \twocolumn
\fi} % FI
\def\@spart#1{\Huge \bfseries % Print title in \huge boldface
#1\@endpart}
% \@makechapterhead {TEXT} : Makes the heading for the \chapter command.
%
\def\@makechapterhead#1{ % Heading for \chapter command
% \vspace*{12pt} % Space at top of text page.
{ \parindent 0pt \raggedright
\ifnum \c@secnumdepth >\m@ne % IF secnumdepth > -1 THEN
\Large\sty@chapter \@chapapp{} \thechapter % Print 'Chapter'
% and number.%removed \bfseries 2006nm
\par
\vskip 12pt \fi % Space between number and title.
\Large\sty@chapter % Title.%removed \bfseries 2006nm
#1\par
\nobreak % TeX penalty to prevent page break.
\vskip 24pt % Space between title and text.
} }
% \@makeschapterhead {TEXT} : Makes the heading for the \chapter* command.
%
\def\@makeschapterhead#1{ % Heading for \chapter* command
% \vspace*{12pt} % Space at top of page.
{ \parindent 0pt \raggedright
\Large\sty@chapter % Title.%removed \bfseries 2006nm
#1\par
\nobreak % TeX penalty to prevent page break.
\vskip 24pt % Space between title and text.
} }
% \secdef{UNSTARCMDS}{STARCMDS} :
% When defining a \chapter or \section command without using
% \@startsection, you can use \secdef as follows:
% \def\chapter { ... \secdef \CMDA \CMDB }
% \def\CMDA [#1]#2{ ... % Command to define \chapter[...]{...}
% \def\CMDB #1{ ... % Command to define \chapter*{...}
\def\chapter{\clearpage % Starts new page.
\pagestyle{fancy} % Page style of chapter page is 'plain' %changed from \thispagestyle{plain} to pagestyle{fancy}2009nm
\global\@topnum\z@ % Prevents figures from going at top of page.
\@afterindentfalse % Suppresses indent in first paragraph. Change
\secdef\@chapter\@schapter} % to \@afterindenttrue to have indent.
\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
\refstepcounter{chapter}
\typeout{\@chapapp\space\thechapter.}
\addcontentsline{toc}{chapter}{\protect
\numberline{\thechapter}#1}\else
\addcontentsline{toc}{chapter}{#1}\fi
\chaptermark{#1}
\addtocontents{lof}{\protect\addvspace{10pt}} % Adds between-chapter space
\addtocontents{lot}{\protect\addvspace{10pt}} % to lists of figs & tables.
\if@twocolumn % Tests for two-column mode.
\@topnewpage[\@makechapterhead{#2}]
\else \@makechapterhead{#2}
\@afterheading % Routine called after chapter and
\fi} % section heading.
\def\@schapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]
\else \@makeschapterhead{#1}
\@afterheading\fi}
% *********************************
% * ALTERNATE THESIS CHAPTER FORM *
% *********************************
\def\altchapter{\clearpage % Starts new page.
\thispagestyle{plain} % Page style of chapter page is 'plain'
\global\@topnum\z@ % Prevents figures from going at top of page.
\@afterindentfalse % Suppresses indent in first paragraph. Change
\secdef\@altchapter\@saltchapter} % to \@afterindenttrue to have indent.
\def\@altchapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
\typeout{#1}
\addcontentsline{toc}{chapter}{#1}\else
\addcontentsline{toc}{chapter}{#1}\fi
\chaptermark{#1}
\addtocontents{lof}{\protect\addvspace{10pt}} % Adds between-chapter space
\addtocontents{lot}{\protect\addvspace{10pt}} % to lists of figs & tables.
\if@twocolumn % Tests for two-column mode.
\@topnewpage[\@makeschapterhead{#2}]
\else \@makeschapterhead{#2}
\@afterheading % Routine called after chapter and
\fi} % section heading.
\def\@saltchapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]
\else \@makeschapterhead{#1}
\@afterheading\fi}
% \@startsection {NAME}{LEVEL}{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE}
% optional * [ALTHEADING]{HEADING}
% Generic command to start a section.
% NAME : e.g., 'subsection'
% LEVEL : a number, denoting depth of section -- e.g., chapter=1,
% section = 2, etc. A section number will be printed if
% and only if LEVEL < or = the value of the secnumdepth
% counter.
% INDENT : Indentation of heading from left margin
% BEFORESKIP : Absolute value = skip to leave above the heading.
% If negative, then paragraph indent of text following
% heading is suppressed.
% AFTERSKIP : if positive, then skip to leave below heading,
% else - skip to leave to right of run-in heading.
% STYLE : commands to set style
% If '*' missing, then increments the counter. If it is present, then
% there should be no [ALTHEADING] argument. A sectioning command
% is normally defined to \@startsection + its first six arguments.
\def\section{\@startsection {section}{1}{\z@}{-3.5ex plus -1ex minus
-.2ex}{2.3ex plus .2ex}{\large\sty@section}} %removed \bfseries 2006nm
\def\subsection{\@startsection{subsection}{2}{\z@}{-3.25ex plus -1ex minus
-.2ex}{1.0ex plus .2ex}{\normalsize\sty@subsection}} %removed \bfseries 2006nm
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-2.12ex plus
-1ex minus -.2ex}{0.001ex plus .2ex}{\normalsize\sty@subsubsection}} %removed \bfseries 2006nm
\def\paragraph{\@startsection
{paragraph}{4}{\z@}{2.25ex plus 1ex minus .2ex}{-1em}{\normalsize\sty@paragraph}} %removed \bfseries 2006nm
\def\subparagraph{\@startsection
{subparagraph}{4}{\parindent}{2.25ex plus 1ex minus
.2ex}{-1em}{\normalsize\sty@subparagraph}} %removed \bfseries 2006nm
% Default initializations of \...mark commands. (See below for their
% us in defining page styles.
%
\def\chaptermark#1{}
% \def\sectionmark#1{} % Preloaded definitions
% \def\subsectionmark#1{}
% \def\subsubsectionmark#1{}
% \def\paragraphmark#1{}
% \def\subparagraphmark#1{}
% The value of the counter secnumdepth gives the depth of the
% highest-level sectioning command that is to produce section numbers.
%
\setcounter{secnumdepth}{2}
% APPENDIX
%
% The \appendix command must do the following:
% -- reset the chapter counter to zero
% -- set \@chapapp to Appendix (for messages)
% -- redefine the chapter counter to produce appendix numbers
% -- reset the section counter to zero
% -- redefine the \chapter command if appendix titles and headings are
% to look different from chapter titles and headings.
\def\appendix{\par
\setcounter{chapter}{0}
\setcounter{section}{0}
\def\@chapapp{Appendix}
\def\thechapter{\Alph{chapter}}}
% ****************************************
% * LISTS *
% ****************************************
%
% The following commands are used to set the default values for the list
% environment's parameters. See the LaTeX manual for an explanation of
% the meanings of the parameters. Defaults for the list environment are
% set as follows. First, \rightmargin, \listparindent and \itemindent
% are set to 0pt. Then, for a Kth level list, the command \@listK is
% called, where 'K' denotes 'i', 'ii', ... , 'vi'. (I.e., \@listiii is
% called for a third-level list.) By convention, \@listK should set
% \leftmargin to \leftmarginK.
%
% For efficiency, level-one list's values are defined at top level, and
% \@listi is defined to set only \leftmargin.
\leftmargini 2.5em
\leftmarginii 2.2em % > \labelsep + width of '(m)'
\leftmarginiii 1.87em % > \labelsep + width of 'vii.'
\leftmarginiv 1.7em % > \labelsep + width of 'M.'
\leftmarginv 1em
\leftmarginvi 1em
\leftmargin\leftmargini
\labelwidth\leftmargini\advance\labelwidth-\labelsep
\labelsep .5em
\parsep 5pt plus 2.5pt minus 1pt
\def\@listi{\leftmargin\leftmargini}
\def\@listii{\leftmargin\leftmarginii
\labelwidth\leftmarginii\advance\labelwidth-\labelsep
\topsep 5pt plus 2.5pt minus 1pt
\parsep 2.5pt plus 1pt minus 1pt
\itemsep \parsep}
\def\@listiii{\leftmargin\leftmarginiii
\labelwidth\leftmarginiii\advance\labelwidth-\labelsep
\topsep 2.5pt plus 1pt minus 1pt
\parsep \z@ \partopsep 1pt plus 0pt minus 1pt
\itemsep \topsep}
\def\@listiv{\leftmargin\leftmarginiv
\labelwidth\leftmarginiv\advance\labelwidth-\labelsep}
\def\@listv{\leftmargin\leftmarginv
\labelwidth\leftmarginv\advance\labelwidth-\labelsep}
\def\@listvi{\leftmargin\leftmarginvi
\labelwidth\leftmarginvi\advance\labelwidth-\labelsep}
Go to most recent revision | Compare with Previous | Blame | View Log