URL
https://opencores.org/ocsvn/phr/phr/trunk
Subversion Repositories phr
[/] [phr/] [trunk/] [doc/] [informe-tesis/] [template/] [Ucalgary/] [ucalgthes1.cls] - Rev 35
Go to most recent revision | Compare with Previous | Blame | View Log
%% This is the University of Calgary Thesis Class file ``ucalgthes.cls''
%% [1998/03/01] -- N. Mancell, UCS].
%% for use with LaTeX2e[1996/12/01]
%
%%% MODIFICATIONS
%% Modified thesis.sty to ucalgthes.cls
%% Changes for LaTeX2e compatibility, font selection and options selection.
%% No new style modifications were done.
%%%HISTORICAL LOCAL MODIFICATIONS - REPORT STYLE TO THESIS.STY"
%% THESIS DOCUMENT STYLE -- Released January 1987
% for LaTeX version 2.09
% Copyright (C) 1985 by Leslie Lamport
% Modified from Report Style by Deborah Teale January 1987
% Modified (March 1988) to clear marks in the CONTENTS and INDEX
% Modified (May 1988) to add newsigncolumn command for multiple signature
% columns on the signing page
% Modified (Sep 1992) to remove date on approval page, add table of contents
% to toc and add defs Author Degree thesis
% default \thesis is thesis rather than dissertation
%\typeout{Document Style 'thesis'. Released May 1988}
%\typeout{Document Style 'thesis'. Released Sep 1992}
%
%%% IDENTIFICATION
\NeedsTeXFormat{LaTeX2e}[1996/12/01]
\ProvidesClass{ucalgthes1}[1998/03/01 v1.0 University of Calgary Thesis Class]
%\RequirePackage{setspace}[200/12/01] %(NM2005) replacing old doublespace.sty %singlespace,onehalfspace and doublespacing options. (nm2007 commented out)%
%%% DECLARATION OF OPTIONS
% The type size option is handled by reading a different (THESxx.CLO)
% file for each size, as follows, to define font size-specific commands:
% 10pt : THES10, 11pt : THES11, 12pt : THES12
% Defaults are set to 12pt, onside, final (98/03/01)NM
%
\newcommand\@ptsize{}
\newcommand\@draftmark{}
\newcommand\@includeprompt{}
\newcommand\@chapterprompt{}
%
%% Font Size Options (nm1998/03/01)
\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
\DeclareOption{11pt}{\renewcommand\@ptsize{1}} %11pt option reads THES11.CLO
\DeclareOption{12pt}{\renewcommand\@ptsize{2}} %12pt option reads THES12.CLO
%
%% Two-side or one-side Printing Option (nm1998/03/01).
\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
%
%% Draft Option (nm1998/03/01)
\DeclareOption{draft}{\renewcommand\@draftmark{1}}
\DeclareOption{final}{\renewcommand\@draftmark{2}}
%
%% Includeprompt Option(prompt user for includeonly files)(nm1998/03/01)
\DeclareOption{includeprompt}{\renewcommand\@includeprompt{\typein[\includefiles]{Type includeonly filenames {f1,f2,f3}}
\includeonly{\includefiles}}}
%
%% Chapterprompt Option(prompts user for chapter number and filename)
%% (nm1998/03/01)
\DeclareOption{chapterprompt}{\renewcommand\chapterprompt{\typein[\chapterfilename]{Type chapter filename }%
\typein[\chapternumber\{Type chapter number }%
\def\chapterprompt{\setcounter{chapter}{\chapternumber}%
\addtocounter{chapter}{-1}%
\include{chapterfilename}}}
%
%%% EXECUTE OPTIONS
\ExecuteOptions{letterpaper,12pt,oneside,final} %(NM2005 added letterpaper)Defaults to 12pt type size, oneside,final
% Draft Option - options gets implemented
%
% \overfullrule = 0pt % Default is don't mark overfull hboxes.
\ifnum \@draftmark = 1
\overfullrule 5pt % Causes overfull hboxes to be marked.
\fi
% The \ProcessOptions command causes the execution of every command FOO
% which is declared and for which the user typed the FOO option in his
% \documentclass command. For every undeclared option BAR there will be
% a warning message. (nm98/03/01)
\ProcessOptions
%\input setspace.sty %(NM 2005 setspace.sty replacing doublespace.sty)(nm 2007 commented out)
\input doublespace.sty %(nm 2007 re-instated)
\input thes1\@ptsize.clo\relax
% ****************************************
% * LISTS *
% ****************************************
%
% ENUMERATE
% Enumeration is done with four counters: enumi, enumii, enumiii
% and enumiv, where enumN controls the numbering of the Nth level
% enumeration. The label is generated by the commands \labelenumi
% ... \labelenumiv. The expansion of \p@enumN\theenumN defines the
% output of a \ref command.
\def\labelenumi{\arabic{enumi}.}
\def\theenumi{\arabic{enumi}}
\def\labelenumii{(\alph{enumii})}
\def\theenumii{\alph{enumii}}
\def\p@enumii{\theenumi}
\def\labelenumiii{\roman{enumiii}.}
\def\theenumiii{\roman{enumiii}}
\def\p@enumiii{\theenumi(\theenumii)}
\def\labelenumiv{\Alph{enumiv}.}
\def\theenumiv{\Alph{enumiv}}
\def\p@enumiv{\p@enumiii\theenumiii}
% ITEMIZE
% Itemization is controlled by four commands: \labelitemi, \labelitemii,
% \labelitemiii, and \labelitemiv, which define the labels of the various
% itemization levels.(\bf to \bfseries, \bullet \m@ath\bullet, etc.
% nm1998/03/01)
\def\labelitemi{$\m@th\bullet$}
\def\labelitemii{\bfseries --}
\def\labelitemiii{$\m@th\ast$}
\def\labelitemiv{$\m@th\cdot$}
% VERSE
% The verse environment is defined by making clever use of the
% list environment's parameters. The user types \\ to end a line.
% This is implemented by \let'in \\ equal \@centercr.
%
\def\verse{\let\\=\@centercr
\list{}{\itemsep\z@ \itemindent -1.5em\listparindent \itemindent
\rightmargin\leftmargin\advance\leftmargin 1.5em}\item[]}
\let\endverse\endlist
% QUOTATION
% Fills lines
% Indents paragraph
%
\def\quotation{\list{}{\listparindent 1.5em
\itemindent\listparindent
\rightmargin\leftmargin\parsep 0pt plus 1pt}\item[]}
\let\endquotation=\endlist
% QUOTE -- same as quotation except no paragraph indentation,
%
\def\quote{\list{}{\rightmargin\leftmargin}\item[]}
\let\endquote=\endlist
% DESCRIPTION
%
% To change the formatting of the label, you must redefine
% \descriptionlabel.
\def\descriptionlabel#1{\hspace\labelsep \bfseries #1}
\def\description{\list{}{\labelwidth\z@ \itemindent-\leftmargin
\let\makelabel\descriptionlabel}}
\let\enddescription\endlist
\newdimen\descriptionmargin
\descriptionmargin=3em
% ****************************************
% * OTHER ENVIRONMENTS *
% ****************************************
%
%
% THEOREM
% \@begintheorem ... \@endtheorem are the commands executed at the
% beginning and end of a (user-defined) theorem-like environment.
% Except \@opargbegintheorem is executed when an optional argument is
% given. Cf. LATEX.TEX.
%
% \def\@begintheorem#1#2{\it \trivlist \item[\hskip \labelsep{\bfseries #1\ #2}]}
% \def\@opargbegintheorem#1#2#3{\it \trivlist
% \item[\hskip \labelsep{\bfseries #1\ #2\ (#3)}]}
% \def\@endtheorem{\endtrivlist}
% TITLEPAGE
% In the normal environments, the titlepage environment does nothing but
% start and end a page, and inhibit page numbers. It also resets the
% page number to zero. In two-column style, it still makes a one-column
% page.
\def\titlepage{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
\else \newpage \fi \thispagestyle{empty}\c@page\z@}
\def\endtitlepage{\if@restonecol\twocolumn \else \newpage \fi}
% Variables for the thesis title page
\def\dept#1{\gdef\@dept{#1}}
\def\degree#1{\gdef\@degree{#1}\gdef\Degree{#1}}
\def\monthname#1{\gdef\@monthname{#1}}
%\def\year#1{\gdef\@year{#1}} %(NM2005 interferred with latex year command for fancyhdr)
\def\thesisyear#1{\gdef\@year{#1}} % redefined as per above comment (NM2005)
\def\thesis#1{\gdef\Thesis{#1}\gdef\@THESIS{\uppercase{#1}}}
\def\author#1{\gdef\@author{#1}\gdef\Author{#1}}
% SIGNINGPAGE
% environment signing and command signline
\newlength{\signwidth}
\newenvironment{signing}[1]{\settowidth{\signwidth}{#1} % %width of longest signature
\def\signline{ \null\vskip 1em\makebox[\signwidth]{\hrulefill}\\} %signature line
\def\newsigncolumn{\end{minipage}\hfill\begin{minipage}[t]{\signwidth}\raggedleft}% added raggedleft 2009nm allow for more than one column of signatures
\singlespace
\noindent\begin{minipage}{\textwidth}
\raggedleft
\null
\begin{minipage}[t]{\signwidth} \raggedleft %added raggedleft 2009nm
}{\null\end{minipage}\end{minipage}
\null
\par
\vfill
\begin{flushright}
\noindent \rule{2.5in}{.01in}\null
\\
\noindent Date
\end{flushright}
\endsinglespace}
% ARRAY AND TABULAR
%
\arraycolsep 5pt % Half the space between columns in an array environment.
\tabcolsep 6pt % Half the space between columns in a tabular environment.
\arrayrulewidth .4pt % Width of rules in array and tabular environment.
\doublerulesep 2pt % Space between adjacent rules in array or tabular env.
% TABBING
%
\tabbingsep \labelsep % Space used by the \' command. (See LaTeX manual.)
% MINIPAGE
% \@minipagerestore is called upon entry to a minipage environment to
% set up things that are to be handled differently inside a minipage
% environment. In the current styles, it does nothing.
%
% \skip\@mpfootins : plays same role for footnotes in a minipage as
% \skip\footins does for ordinary footnotes
\skip\@mpfootins = \skip\footins
% FRAMEBOX
%
\fboxsep = 3pt % Space left between box and text by \fbox and \framebox.
\fboxrule = .4pt % Width of rules in box made by \fbox and \framebox.
% ****************************************
% * CHAPTERS AND SECTIONS *
% ****************************************
%
% DEFINE COUNTERS:
%
% \newcounter{NEWCTR}[OLDCTR] : Defines NEWCTR to be a counter, which is
% reset to zero when counter OLDCTR is stepped.
% Counter OLDCTR must already be defined.
\newcounter{part}
\newcounter {chapter}
\newcounter {section}[chapter]
\newcounter {subsection}[section]
\newcounter {subsubsection}[subsection]
\newcounter {paragraph}[subsubsection]
\newcounter {subparagraph}[paragraph]
% For any counter CTR, \theCTR is a macro that defines the printed version
% of counter CTR. It is defined in terms of the following macros:
%
% \arabic{COUNTER} : The value of COUNTER printed as an arabic numeral.
% \roman{COUNTER} : Its value printed as a lower-case roman numberal.
% \Roman{COUNTER} : Its value printed as an upper-case roman numberal.
% \alph{COUNTER} : Value of COUNTER printed as a lower-case letter:
% 1 = a, 2 = b, etc.
% \Alph{COUNTER} : Value of COUNTER printed as an upper-case letter:
% 1 = A, 2 = B, etc.
%
\def\thepart {\Roman{part}}
\def\thechapter {\arabic{chapter}}
\def\thesection {\thechapter.\arabic{section}}
\def\thesubsection {\thesection.\arabic{subsection}}
\def\thesubsubsection {\thesubsection .\arabic{subsubsection}}
\def\theparagraph {\thesubsubsection.\arabic{paragraph}}
\def\thesubparagraph {\theparagraph.\arabic{subparagraph}}
% \@chapapp is initially defined to be 'Chapter'. The \appendix
% command redefines it to be 'Appendix'.
%
\def\@chapapp{Chapter}
% ****************************************
% * TABLE OF CONTENTS, ETC. *
% ****************************************
%
% A \subsection command writes a
% \contentsline{subsection}{TITLE}{PAGE}
% command on the .toc file, where TITLE contains the contents of the
% entry and PAGE is the page number. If subsections are being numbered,
% then TITLE will be of the form
% \numberline{NUM}{HEADING}
% where NUM is the number produced by \thesubsection. Other sectioning
% commands work similarly.
%
% A \caption command in a 'figure' environment writes
% \contentsline{figure}{\numberline{NUM}{CAPTION}}{PAGE}
% on the .lof file, where NUM is the number produced by \thefigure and
% CAPTION is the figure caption. It works similarly for a 'table' environment.
%
% The command \contentsline{NAME} expands to \l@NAME. So, to specify
% the table of contents, we must define \l@chapter, \l@section,
% \l@subsection, ... ; to specify the list of figures, we must define
% \l@figure; and so on. Most of these can be defined with the
% \@dottedtocline command, which works as follows.
%
% \@dottedtocline{LEVEL}{INDENT}{NUMWIDTH}{TITLE}{PAGE}
% LEVEL : An entry is produced only if LEVEL < or = value of
% 'tocdepth' counter. Note, \chapter is level 0, \section
% is level 1, etc.
% INDENT : The indentation from the outer left margin of the start of
% the contents line.
% NUMWIDTH : The width of a box in which the section number is to go,
% if TITLE includes a \numberline command.
%
% This command uses the following three parameters, which are set
% with a \def (so em's can be used to make them depend upon the font).
% \@pnumwidth : The width of a box in which the page number is put.
% \@tocrmarg : The right margin for multiple line entries. One
% wants \@tocrmarg > or = \@pnumwidth
% \@dotsep : Separation between dots, in mu units. Should be \def'd to
% a number like 2 or 1.7
\def\@pnumwidth{1.55em}
\def\@tocrmarg {2.55em}
\def\@dotsep{4.5}
\setcounter{tocdepth}{2}
% TABLEOFCONTENTS
% In thesis class, \tableofcontents, \listoffigures, etc. are always
% set in single-column style. @restonecol
\def\tableofcontents{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
\fi\chapter*{\bf Table of Contents\@mkboth{}{}\addcontentsline{toc}{chapter}{Table of Contents}}
\@starttoc{toc}\if@restonecol\twocolumn\fi} %added \bf to print Table of Contents in bold on pg 2006nm
\def\l@part#1#2{\addpenalty{-\@highpenalty}
\addvspace{2.25em plus 1pt} % space above part line
\begingroup
\@tempdima 3em % width of box holding part number, used by
\parindent \z@ \rightskip \@pnumwidth %% \numberline
\parfillskip -\@pnumwidth
{%\large \bfseries % set line in \large boldface 2006nm
\leavevmode % TeX command to enter horizontal mode.
#1\hfil \hbox to\@pnumwidth{\hss #2}}\par
\nobreak % Never break after part entry
\endgroup}
\def\l@chapter#1#2{\pagebreak[3]
\vskip 1.0em plus 1pt % space above chapter line
\@tempdima 1.5em % width of box holding chapter number
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
%\bfseries % Boldface removed. 2006nm
\leavevmode % TeX command to enter horizontal mode.
#1\hfil \hbox to\@pnumwidth{\hss #2}\par
\endgroup}
\def\l@chapter{\@dottedtocline{0}{1.5em}{2.3em}} %added this line 2006nm
\def\l@section{\@dottedtocline{1}{1.5em}{2.3em}} %changed 1 to 0 2006nm
\def\l@subsection{\@dottedtocline{2}{3.8em}{3.2em}}
\def\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
\def\l@paragraph{\@dottedtocline{4}{10em}{5em}}
\def\l@subparagraph{\@dottedtocline{5}{12em}{6em}}
% LIST OF FIGURES
%
\def\listoffigures{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
\fi\chapter*{List of Figures\markboth
{}{}\addcontentsline{toc}{chapter}{List of Figures}}%(NM 2005 added List of Figures to TOC)
\@starttoc{lof}\if@restonecol\twocolumn
\fi}
\def\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
% LIST OF TABLES
%
\def\listoftables{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
\fi\chapter*{List of Tables\markboth
{}{}\addcontentsline{toc}{chapter}{List of Tables}}%(NM 2005 added List of Tables to TOC)
\@starttoc{lot}\if@restonecol\twocolumn
\fi}
\let\l@table\l@figure
% ****************************************
% * BIBLIOGRAPHY *
% ****************************************
%
% The thebibliography environment executes the following commands:
%
% \def\newblock{\hskip .11em plus .33em minus -.07em} --
% Defines the `closed' format, where the blocks (major units of
% information) of an entry run together.
%
% \sloppy -- Used because it's rather hard to do line breaks in
% bibliographies,
%
% \sfcode`\.=1000\relax --
% Causes a `.' (period) not toproduce an end-of-sentence space.
\def\thebibliography#1{\altchapter{Bibliography}\list
{[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
\advance\leftmargin\labelsep
\usecounter{enumi}}
\def\newblock{\hskip .11em plus .33em minus -.07em}
\sloppy
\sfcode`\.=1000\relax}
\let\endthebibliography=\endlist
% \def\@biblabel#1{[#1]\hfill} % Produces the label for a \bibitem[...]
% command.
% \def\@cite#1{[#1]} % Produces the output of the \cite command.
% ****************************************
% * THE INDEX *
% ****************************************
%
% THE THEINDEX ENVIRONMENT
% Produces double column format, with each paragraph a separate entry.
% The user commands \item, \subitem and \subsubitem are used to
% produce the entries, and \indexspace adds an extra vertical space
% that's the right size to put above the first entry with a new letter
% of the alphabet.
\newif\if@restonecol
\def\theindex{\@restonecoltrue\if@twocolumn\@restonecolfalse\fi
\columnseprule \z@
\columnsep 35pt\twocolumn[\@makeschapterhead{Index}]
\markboth{}{}\thispagestyle{plain}\parindent\z@
\parskip\z@ plus .3pt\relax\let\item\@idxitem}
\def\@idxitem{\par\hangindent 40pt}
\def\subitem{\par\hangindent 40pt \hspace*{20pt}}
\def\subsubitem{\par\hangindent 40pt \hspace*{30pt}}
\def\endtheindex{\if@restonecol\onecolumn\else\clearpage\fi}
\def\indexspace{\par \vskip 10pt plus 5pt minus 3pt\relax}
% ****************************************
% * FOOTNOTES *
% ****************************************
%
% \footnoterule is a macro to draw the rule separating the footnotes from
% the text. It should take zero vertical space, so it needs a negative
% skip to compensate for any positive space taken by the rule. (See
% PLAIN.TEX.)
\def\footnoterule{\kern-3\p@
\hrule width .4\columnwidth
\kern 2.6\p@} % The \hrule has default height of .4pt .
% \newcounter{footnote}
\@addtoreset{footnote}{chapter} % Numbers footnotes within chapters
% \@makefntext{NOTE} :
% Must produce the actual footnote, using \@thefnmark as the mark
% of the footnote and NOTE as the text. It is called when effectively
% inside a \parbox of width \columnwidth (i.e., with \hsize =
% \columnwidth).
%
% The following macro indents all lines of the footnote by 10pt, and
% indents the first line of a new paragraph by 1em. To change these
% dimensions, just substitute the desired value for '10pt' [in both
% places] or '1em'. The mark is flushright against the footnote.
% \long\def\@makefntext#1{\@setpar{\@@par\@tempdima \hsize
% \advance\@tempdima-10pt\parshape \@ne 10pt \@tempdima}\par
% \parindent 1em\noindent \hbox to \z@{\hss$^{\@thefnmark}$}#1}
%
% A simpler macro is used, in which the footnote text is
% set like an ordinary text paragraph, with no indentation except
% on the first line of a paragraph, and the first line of the
% footnote. Thus, all the macro must do is set \parindent
% to the appropriate value for succeeding paragraphs and put the
% proper indentation before mark.
\long\def\@makefntext#1{\parindent 1em\noindent
\hbox to 1.8em{\hss$^{\@thefnmark}$}#1}
% \@makefnmark : A macro to generate the footnote marker that goes
% in the text. Default used.
%
% ****************************************
% * FIGURES AND TABLES *
% ****************************************
%
% Float placement parameters. See LaTeX manual for their definition.
%
\setcounter{topnumber}{2}
\def\topfraction{.7}
\setcounter{bottomnumber}{1}
\def\bottomfraction{.3}
\setcounter{totalnumber}{3}
\def\textfraction{.2}
\def\floatpagefraction{.5}
\setcounter{dbltopnumber}{2}
\def\dbltopfraction{.7}
\def\dblfloatpagefraction{.5}
% \@makecaption{NUMBER}{TEXT} : Macro to make a figure or table caption.
% NUMBER : Figure or table number--e.g., 'Figure 3.2'
% TEXT : The caption text.
% Macro should be called inside a \parbox of right width, with \normalsize.
\long\def\@makecaption#1#2{
\vskip 10pt
\setbox\@tempboxa\hbox{#1: #2}
\ifdim \wd\@tempboxa >\hsize % IF longer than one line:
\unhbox\@tempboxa\par % THEN set as ordinary paragraph.
\else % ELSE center.
\hbox to\hsize{\hfil\box\@tempboxa\hfil}
\fi}
% To define a float of type TYPE (e.g., TYPE = figure), the document style
% must define the following.
%
% \fps@TYPE : The default placement specifier for floats of type TYPE.
%
% \ftype@TYPE : The type number for floats of type TYPE. Each TYPE has
% associated a unique positive TYPE NUMBER, which is a power
% of two. E.g., figures might have type number 1, tables type
% number 2, programs type number 4, etc.
%
% \ext@TYPE : The file extension indicating the file on which the
% contents list for float type TYPE is stored. For example,
% \ext@figure = 'lof'.
%
% \fnum@TYPE : A macro to generate the figure number for a caption.
% For example, \fnum@TYPE == Figure \thefigure.
%
% The actual float-making environment commands--e.g., the commands
% \figure and \endfigure--are defined in terms of the macros \@float
% and \end@float, which are described below.
%
% \@float{TYPE}[PLACEMENT] : Macro to begin a float environment for a
% single-column float of type TYPE with PLACEMENT as the placement
% specifier. The default value of PLACEMENT is defined by \fps@TYPE.
% The environment is ended by \end@float.
% E.g., \figure == \@float{figure}, \endfigure == \end@float.
% FIGURE
\newcounter{figure}[chapter]
\def\thefigure{\thechapter.\@arabic\c@figure}
\def\fps@figure{tbp}
\def\ftype@figure{1}
\def\ext@figure{lof}
\def\fnum@figure{Figure \thefigure}
\def\figure{\@float{figure}}
\let\endfigure\end@float
\@namedef{figure*}{\@dblfloat{figure}}
\@namedef{endfigure*}{\end@dblfloat}
% TABLE
%
\newcounter{table}[chapter]
\def\thetable{\thechapter.\@arabic\c@table}
\def\fps@table{tbp}
\def\ftype@table{2}
\def\ext@table{lot}
\def\fnum@table{Table \thetable}
\def\table{\@float{table}}
\let\endtable\end@float
\@namedef{table*}{\@dblfloat{table}}
\@namedef{endtable*}{\end@dblfloat}
% ****************************************
% * TITLE AND ABSTRACT *
% ****************************************
%
%
% Uses same title and abstract format as the article style's
% Uses thesistitlepage option
% titlepage option.
\input thesistitlepage.sty
% ****************************************
% * PAGE STYLES *
% ****************************************
%
% The page style 'foo' is defined by defining the command \ps@foo. This
% command should make only local definitions. There should be no stray
% spaces in the definition, since they could lead to mysterious extra
% spaces in the output.
%
% The \ps@... command defines the macros \@oddhead, \@oddfoot,
% \@evenhead, and \@evenfoot to define the running heads and
% feet---e.g., \@oddhead is the macro to produce the contents of the
% heading box for odd-numbered pages. It is called inside an \hbox of
% width \textwidth.
%
% To make headings determined by the sectioning commands, the page style
% defines the commands \chaptermark, \sectionmark, ... , where
% \chaptermark{TEXT} is called by \chapter to set a mark, and so on.
% The \...mark commands and the \...head macros are defined with the
% help of the following macros. (All the \...mark commands should be
% initialized to no-ops.)
%
% MARKING CONVENTIONS:
% LaTeX extends TeX's \mark facility by producing two kinds of marks
% a 'left' and a 'right' mark, using the following commands:
% \markboth{LEFT}{RIGHT} : Adds both marks.
% \markright{RIGHT} : Adds a 'right' mark.
% \leftmark : Used in the \@oddhead, \@oddfoot, \@evenhead or \@evenfoot
% macro, gets the current 'left' mark. Works like TeX's
% \botmark command.
% \rightmark : Used in the \@oddhead, \@oddfoot, \@evenhead or \@evenfoot
% macro, gets the current 'right' mark. Works like TeX's
% \firstmark command.
% The marking commands work reasonably well for right marks 'numbered
% within' left marks--e.g., the left mark is changed by a \chapter command and
% the right mark is changed by a \section command. However, it does
% produce somewhat anomalous results if two \bothmark's occur on the same page.
%
%% (98/03/01) - NM Changed \rm and \sl to \rmfamily and \slshape. Removed
%% \hbox{} also.
%
\mark{{}{}} % Initializes TeX's marks
% \def\ps@empty{\def\@oddhead{}
% \def\@oddfoot{}
% \def\@evenhead{}\def\@evenfoot{}}
%
% \def\ps@plain{\def\@oddhead{}
% \def\@oddfoot{\rmfamily\hfil\thepage\hfil}
% \def\@evenhead{}
% \let\@evenfoot\@oddfoot}
% Definition of 'headings' page style
% Note the use of ##1 for parameter of \def\chaptermark inside the
% \def\ps@headings.
%
%\if@twoside % If two-sided printing.
%\def\ps@headings{\def\@oddfoot{}\def\@evenfoot{}% No feet.
%\def\@evenhead{\rmfamily \thepage\hfil \slshape \leftmark}% Left heading.
%\def\@oddhead{{\slshape \rightmark}\hfil \rmfamily\thepage}% Right heading.
%\def\chaptermark##1{\markboth {\uppercase{\ifnum \c@secnumdepth >\m@ne
% \@chapapp\ \thechapter. \ \fi ##1}}{}}%
%\def\sectionmark##1{\markright {\uppercase{\ifnum \c@secnumdepth >\z@
% \thesection. \ \fi ##1}}}}
%\else % If one-sided printing.
%\def\ps@headings{\def\@oddfoot{}\def\@evenfoot{}% No feet.%2009m,
%\def\@oddhead{{\slshape \rightmark} \hfil \rmfamily\thepage}% Heading.%2009nm
%\def\chaptermark##1{\markright {\uppercase{\ifnum \c@secnumdepth >\m@ne%2009nm
% \@chapapp\ \thechapter. \ \fi ##1}}}}%2009nm
%\fi%2009nm
% Definition of 'myheadings' page style.
%
%\def\ps@myheadings{\def\@oddhead{{\slshape\rightmark} \hfil \rmfamily\thepage}%
%\def\@oddfoot{}\def\@evenhead{\rmfamily \thepage\hfil\slshape\leftmark}%
%\def\@evenfoot{}\def\sectionmark##1{}\def\subsectionmark##1{}}
% ****************************************
% * MISCELLANEOUS *
% ****************************************
%
% DATE
%
\def\today{\ifcase\month\or
January\or February\or March\or April\or May\or June\or
July\or August\or September\or October\or November\or December\fi
\space\number\day, \number\year}
% EQUATION and EQNARRAY -- put here because it must follow \chapter definition
%
% \newcounter{equation}
%
\@addtoreset{equation}{chapter} % Makes \chapter reset 'equation' counter.
\def\theequation{\thechapter.\arabic{equation}}
% \jot = 3pt % Extra space added between lines of an eqnarray environment
% The macro \@eqnnum defines how equation numbers are to appear in equations.
%
% \def\@eqnnum{(\theequation)}
%
% ****************************************
% * INITIALIZATION *
% ****************************************
%
% Default initializations
\thesis{thesis} % default thesis rather than dissertation
%\ps@myheadings % 'myheadings' page style
\pagenumbering{arabic} % Arabic page numbers
\onecolumn % Single-column.
\if@twoside\else\raggedbottom\fi % Ragged bottom unless twoside option.
\setstretch{1.7} % Initial baselinestretch
Go to most recent revision | Compare with Previous | Blame | View Log