OpenCores
URL https://opencores.org/ocsvn/phr/phr/trunk

Subversion Repositories phr

[/] [phr/] [trunk/] [doc/] [informe-tesis/] [template/] [Ucalgary/] [ucalgthes1.cls] - Rev 5

Compare with Previous | Blame | View Log

%% This is the University of Calgary Thesis Class file ``ucalgthes.cls''
%% [1998/03/01] -- N. Mancell, UCS]. 
%% for use with LaTeX2e[1996/12/01]
%
%%% MODIFICATIONS
%%  Modified thesis.sty to ucalgthes.cls 
%%  Changes for LaTeX2e compatibility, font selection and options selection.
%%  No new style modifications were done.

%%%HISTORICAL LOCAL MODIFICATIONS - REPORT STYLE TO THESIS.STY"
%% THESIS DOCUMENT STYLE -- Released January 1987
%    for LaTeX version 2.09
% Copyright (C) 1985 by Leslie Lamport
% Modified from Report Style by Deborah Teale January 1987
% Modified (March 1988) to clear marks in the CONTENTS and INDEX
% Modified (May 1988) to add newsigncolumn command for multiple signature
%                     columns on the signing page
% Modified (Sep 1992) to remove date on approval page, add table of contents 
%                     to toc and add defs Author Degree thesis 
%                     default \thesis is thesis rather than dissertation
%\typeout{Document Style 'thesis'.  Released May 1988}
%\typeout{Document Style 'thesis'. Released Sep 1992}
%
%%% IDENTIFICATION
\NeedsTeXFormat{LaTeX2e}[1996/12/01]
\ProvidesClass{ucalgthes1}[1998/03/01 v1.0 University of Calgary Thesis Class]
%\RequirePackage{setspace}[200/12/01] %(NM2005) replacing old doublespace.sty %singlespace,onehalfspace and doublespacing options. (nm2007 commented out)%

%%% DECLARATION OF OPTIONS
%  The type size option is handled by reading a different (THESxx.CLO)
%  file for each  size, as follows, to define font size-specific commands:
%       10pt : THES10, 11pt : THES11, 12pt : THES12
%  Defaults are set to 12pt, onside, final (98/03/01)NM
%
\newcommand\@ptsize{}
\newcommand\@draftmark{}
\newcommand\@includeprompt{}
\newcommand\@chapterprompt{}
%
%% Font Size Options (nm1998/03/01)
\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
\DeclareOption{11pt}{\renewcommand\@ptsize{1}} %11pt option reads THES11.CLO
\DeclareOption{12pt}{\renewcommand\@ptsize{2}} %12pt option reads THES12.CLO
%
%%  Two-side or one-side Printing Option (nm1998/03/01).
\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
%
%%  Draft Option (nm1998/03/01)
\DeclareOption{draft}{\renewcommand\@draftmark{1}}
\DeclareOption{final}{\renewcommand\@draftmark{2}}
%
%%  Includeprompt Option(prompt user for includeonly files)(nm1998/03/01)
\DeclareOption{includeprompt}{\renewcommand\@includeprompt{\typein[\includefiles]{Type includeonly filenames {f1,f2,f3}}
\includeonly{\includefiles}}}
%
%%  Chapterprompt Option(prompts user for chapter number and filename)
%%  (nm1998/03/01)
\DeclareOption{chapterprompt}{\renewcommand\chapterprompt{\typein[\chapterfilename]{Type chapter filename }%
\typein[\chapternumber\{Type chapter number }%
\def\chapterprompt{\setcounter{chapter}{\chapternumber}%
\addtocounter{chapter}{-1}%
\include{chapterfilename}}}
%
%%% EXECUTE OPTIONS
\ExecuteOptions{letterpaper,12pt,oneside,final} %(NM2005 added letterpaper)Defaults to 12pt type size, oneside,final

%  Draft Option - options gets implemented
%
% \overfullrule = 0pt             % Default is don't mark overfull hboxes.
\ifnum \@draftmark = 1
\overfullrule 5pt  % Causes overfull hboxes to be marked.
\fi

% The \ProcessOptions command causes the execution of every command FOO 
% which is declared and for which the user typed the FOO option in his
% \documentclass command.  For every undeclared option BAR there will be
% a warning message. (nm98/03/01)


\ProcessOptions

%\input setspace.sty %(NM 2005 setspace.sty replacing doublespace.sty)(nm 2007 commented out)
\input doublespace.sty %(nm 2007 re-instated)
\input thes1\@ptsize.clo\relax


%    ****************************************
%    *                LISTS                 *
%    ****************************************
%

% ENUMERATE
%  Enumeration is done with four counters: enumi, enumii, enumiii
%  and enumiv, where enumN controls the numbering of the Nth level
%  enumeration.  The label is generated by the commands \labelenumi 
%  ... \labelenumiv.  The expansion of \p@enumN\theenumN defines the 
%  output of a \ref command.  

\def\labelenumi{\arabic{enumi}.}    
\def\theenumi{\arabic{enumi}}     
 
\def\labelenumii{(\alph{enumii})}
\def\theenumii{\alph{enumii}}
\def\p@enumii{\theenumi}

\def\labelenumiii{\roman{enumiii}.}
\def\theenumiii{\roman{enumiii}}
\def\p@enumiii{\theenumi(\theenumii)}

\def\labelenumiv{\Alph{enumiv}.}
\def\theenumiv{\Alph{enumiv}}     
\def\p@enumiv{\p@enumiii\theenumiii}

% ITEMIZE
% Itemization is controlled by four commands: \labelitemi, \labelitemii,
% \labelitemiii, and \labelitemiv, which define the labels of the various 
% itemization levels.(\bf to \bfseries, \bullet \m@ath\bullet, etc.
%  nm1998/03/01)

\def\labelitemi{$\m@th\bullet$}
\def\labelitemii{\bfseries --}
\def\labelitemiii{$\m@th\ast$}
\def\labelitemiv{$\m@th\cdot$}


% VERSE
%   The verse environment is defined by making clever use of the
%   list environment's parameters.  The user types \\ to end a line.
%   This is implemented by \let'in \\ equal \@centercr.
%
\def\verse{\let\\=\@centercr  
  \list{}{\itemsep\z@ \itemindent -1.5em\listparindent \itemindent 
          \rightmargin\leftmargin\advance\leftmargin 1.5em}\item[]}
\let\endverse\endlist

% QUOTATION
%   Fills lines
%   Indents paragraph
%   
\def\quotation{\list{}{\listparindent 1.5em
    \itemindent\listparindent
    \rightmargin\leftmargin\parsep 0pt plus 1pt}\item[]}
\let\endquotation=\endlist

% QUOTE -- same as quotation except no paragraph indentation,
%
\def\quote{\list{}{\rightmargin\leftmargin}\item[]}
\let\endquote=\endlist

% DESCRIPTION 
%
%  To change the formatting of the label, you must redefine 
%  \descriptionlabel.  

\def\descriptionlabel#1{\hspace\labelsep \bfseries #1}
\def\description{\list{}{\labelwidth\z@ \itemindent-\leftmargin
       \let\makelabel\descriptionlabel}}

\let\enddescription\endlist

\newdimen\descriptionmargin
\descriptionmargin=3em


%    ****************************************
%    *         OTHER ENVIRONMENTS           *
%    ****************************************
%
%
% THEOREM 
% \@begintheorem ... \@endtheorem are the commands executed at the
% beginning and end of a (user-defined) theorem-like environment.
% Except \@opargbegintheorem is executed when an optional argument is
% given.  Cf. LATEX.TEX.
%
% \def\@begintheorem#1#2{\it \trivlist \item[\hskip \labelsep{\bfseries #1\ #2}]}
% \def\@opargbegintheorem#1#2#3{\it \trivlist
%       \item[\hskip \labelsep{\bfseries #1\ #2\ (#3)}]}
% \def\@endtheorem{\endtrivlist}


% TITLEPAGE
%  In the normal environments, the titlepage environment does nothing but 
%  start and end a page, and inhibit page numbers.  It also resets the
%  page number to zero.  In two-column style, it still makes a one-column
%  page.
\def\titlepage{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
     \else \newpage \fi \thispagestyle{empty}\c@page\z@}

\def\endtitlepage{\if@restonecol\twocolumn \else \newpage \fi}
% Variables for the thesis title page
\def\dept#1{\gdef\@dept{#1}}
\def\degree#1{\gdef\@degree{#1}\gdef\Degree{#1}}
\def\monthname#1{\gdef\@monthname{#1}}
%\def\year#1{\gdef\@year{#1}} %(NM2005 interferred with latex year command for fancyhdr)
      \def\thesisyear#1{\gdef\@year{#1}} % redefined as per above comment (NM2005)
\def\thesis#1{\gdef\Thesis{#1}\gdef\@THESIS{\uppercase{#1}}}
\def\author#1{\gdef\@author{#1}\gdef\Author{#1}}

% SIGNINGPAGE
% environment signing and command signline
\newlength{\signwidth}
\newenvironment{signing}[1]{\settowidth{\signwidth}{#1} %     %width of longest signature
\def\signline{ \null\vskip 1em\makebox[\signwidth]{\hrulefill}\\}       %signature line
\def\newsigncolumn{\end{minipage}\hfill\begin{minipage}[t]{\signwidth}\raggedleft}% added raggedleft 2009nm allow for more than one column of signatures
\singlespace
\noindent\begin{minipage}{\textwidth}
\raggedleft
\null
\begin{minipage}[t]{\signwidth} \raggedleft %added raggedleft 2009nm
}{\null\end{minipage}\end{minipage}
\null
\par
\vfill
\begin{flushright}
\noindent  \rule{2.5in}{.01in}\null
\\
\noindent Date
\end{flushright}
\endsinglespace}

% ARRAY AND TABULAR
%

\arraycolsep 5pt     % Half the space between columns in an array environment.
\tabcolsep 6pt       % Half the space between columns in a tabular environment.
\arrayrulewidth .4pt % Width of rules in array and tabular environment.
\doublerulesep 2pt   % Space between adjacent rules in array or tabular env.

% TABBING
%
\tabbingsep \labelsep   % Space used by the \' command.  (See LaTeX manual.)

% MINIPAGE
%  \@minipagerestore is called upon entry to a minipage environment to
%  set up things that are to be handled differently inside a minipage
%  environment. In the current styles, it does nothing.
%
% \skip\@mpfootins : plays same role for footnotes in a minipage as
%                    \skip\footins does for ordinary footnotes

\skip\@mpfootins = \skip\footins

% FRAMEBOX
%
\fboxsep = 3pt    % Space left between box and text by \fbox and \framebox.
\fboxrule = .4pt  % Width of rules in box made by \fbox and \framebox.


%    ****************************************
%    *        CHAPTERS AND SECTIONS         *
%    ****************************************
%
% DEFINE COUNTERS:
%
% \newcounter{NEWCTR}[OLDCTR] : Defines NEWCTR to be a counter, which is 
%                               reset to zero when counter OLDCTR is stepped.  
%                               Counter OLDCTR must already be defined.

\newcounter{part}
\newcounter {chapter}
\newcounter {section}[chapter]
\newcounter {subsection}[section]
\newcounter {subsubsection}[subsection]
\newcounter {paragraph}[subsubsection]
\newcounter {subparagraph}[paragraph]

% For any counter CTR, \theCTR is a macro that defines the printed version
% of counter CTR.  It is defined in terms of the following macros:
%
%  \arabic{COUNTER} : The value of COUNTER printed as an arabic numeral.
%  \roman{COUNTER}  : Its value printed as a lower-case roman numberal.
%  \Roman{COUNTER}  : Its value printed as an upper-case roman numberal.
%  \alph{COUNTER}   : Value of COUNTER printed as a lower-case letter:
%                         1 = a, 2 = b, etc.
%  \Alph{COUNTER}   : Value of COUNTER printed as an upper-case letter:
%                           1 = A, 2 = B, etc.
%

\def\thepart          {\Roman{part}}
\def\thechapter       {\arabic{chapter}}
\def\thesection       {\thechapter.\arabic{section}}
\def\thesubsection    {\thesection.\arabic{subsection}}
\def\thesubsubsection {\thesubsection .\arabic{subsubsection}}
\def\theparagraph     {\thesubsubsection.\arabic{paragraph}}
\def\thesubparagraph  {\theparagraph.\arabic{subparagraph}}
                     
% \@chapapp is initially defined to be 'Chapter'.  The \appendix
% command redefines it to be 'Appendix'.
%
\def\@chapapp{Chapter}



%    ****************************************
%    *         TABLE OF CONTENTS, ETC.      *
%    ****************************************
%
% A \subsection command writes a 
%       \contentsline{subsection}{TITLE}{PAGE}
% command on the .toc file, where TITLE contains the contents of the
% entry and PAGE is the page number.  If subsections are being numbered,
% then TITLE will be of the form
%       \numberline{NUM}{HEADING}
% where NUM is the number produced by \thesubsection.  Other sectioning
% commands work similarly.  
%
% A \caption command in a 'figure' environment writes
%    \contentsline{figure}{\numberline{NUM}{CAPTION}}{PAGE}
% on the .lof file, where NUM is the number produced by \thefigure and
% CAPTION is the figure caption.  It works similarly for a 'table' environment.
%
% The command \contentsline{NAME} expands to \l@NAME.  So, to specify
% the table of contents, we must define \l@chapter, \l@section, 
% \l@subsection, ... ; to specify the list of figures, we must define
% \l@figure; and so on.  Most of these can be defined with the
% \@dottedtocline command, which works as follows.
%
% \@dottedtocline{LEVEL}{INDENT}{NUMWIDTH}{TITLE}{PAGE}
%    LEVEL    : An entry is produced only if LEVEL < or = value of 
%               'tocdepth' counter.  Note, \chapter is level 0, \section
%               is level 1, etc.
%    INDENT   : The indentation from the outer left margin of the start of 
%               the contents line.
%    NUMWIDTH : The width of a box in which the section number is to go,
%               if TITLE includes a \numberline command.
%   
% This command uses the following three parameters, which are set
% with a \def (so em's can be used to make them depend upon the font).
%   \@pnumwidth : The width of a box in which the page number is put.
%   \@tocrmarg  : The right margin for multiple line entries.  One
%                 wants \@tocrmarg > or = \@pnumwidth
%   \@dotsep    : Separation between dots, in mu units.  Should be \def'd to
%                 a number like 2 or 1.7

\def\@pnumwidth{1.55em}
\def\@tocrmarg {2.55em}
\def\@dotsep{4.5}
\setcounter{tocdepth}{2}


% TABLEOFCONTENTS
%  In thesis class, \tableofcontents, \listoffigures, etc. are always
%  set in single-column style.  @restonecol


\def\tableofcontents{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
  \fi\chapter*{\bf Table of Contents\@mkboth{}{}\addcontentsline{toc}{chapter}{Table of Contents}} 
 \@starttoc{toc}\if@restonecol\twocolumn\fi} %added \bf to print Table of Contents in bold on pg 2006nm


\def\l@part#1#2{\addpenalty{-\@highpenalty}
   \addvspace{2.25em plus 1pt}  % space above part line
   \begingroup
   \@tempdima 3em         % width of box holding part number, used by 
     \parindent \z@ \rightskip \@pnumwidth             %% \numberline
     \parfillskip -\@pnumwidth   
     {%\large \bfseries          % set line in \large boldface 2006nm
     \leavevmode          % TeX command to enter horizontal mode.       
     #1\hfil \hbox to\@pnumwidth{\hss #2}}\par
     \nobreak             % Never break after part entry
   \endgroup}


\def\l@chapter#1#2{\pagebreak[3] 
   \vskip 1.0em plus 1pt  % space above chapter line
   \@tempdima 1.5em       % width of box holding chapter number
   \begingroup
     \parindent \z@ \rightskip \@pnumwidth 
     \parfillskip -\@pnumwidth   
     %\bfseries                  % Boldface removed. 2006nm
     \leavevmode          % TeX command to enter horizontal mode.       
     #1\hfil \hbox to\@pnumwidth{\hss #2}\par
   \endgroup}
      
\def\l@chapter{\@dottedtocline{0}{1.5em}{2.3em}}  %added this line 2006nm
\def\l@section{\@dottedtocline{1}{1.5em}{2.3em}} %changed 1 to 0 2006nm
\def\l@subsection{\@dottedtocline{2}{3.8em}{3.2em}}
\def\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
\def\l@paragraph{\@dottedtocline{4}{10em}{5em}}
\def\l@subparagraph{\@dottedtocline{5}{12em}{6em}}

% LIST OF FIGURES
%
\def\listoffigures{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
  \fi\chapter*{List of Figures\markboth
   {}{}\addcontentsline{toc}{chapter}{List of Figures}}%(NM 2005 added List of Figures to TOC)
   \@starttoc{lof}\if@restonecol\twocolumn
  \fi}

\def\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}

% LIST OF TABLES
%
\def\listoftables{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
  \fi\chapter*{List of Tables\markboth
   {}{}\addcontentsline{toc}{chapter}{List of Tables}}%(NM 2005 added List of Tables to TOC) 
   \@starttoc{lot}\if@restonecol\twocolumn
  \fi}

\let\l@table\l@figure



%    ****************************************
%    *             BIBLIOGRAPHY             *
%    ****************************************
%
% The thebibliography environment executes the following commands:
%
%  \def\newblock{\hskip .11em plus .33em minus -.07em} --
%      Defines the `closed' format, where the blocks (major units of 
%      information) of an entry run together.
%
%  \sloppy  -- Used because it's rather hard to do line breaks in 
%      bibliographies,
% 
%  \sfcode`\.=1000\relax --
%      Causes a `.' (period) not toproduce an end-of-sentence space.

\def\thebibliography#1{\altchapter{Bibliography}\list
  {[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
    \advance\leftmargin\labelsep
    \usecounter{enumi}}
    \def\newblock{\hskip .11em plus .33em minus -.07em}
    \sloppy
    \sfcode`\.=1000\relax}

\let\endthebibliography=\endlist

% \def\@biblabel#1{[#1]\hfill}  % Produces the label for a \bibitem[...]
                                % command. 
% \def\@cite#1{[#1]}            % Produces the output of the \cite command.



%    ****************************************
%    *              THE INDEX               *
%    ****************************************
%
% THE THEINDEX ENVIRONMENT
% Produces double column format, with each paragraph a separate entry.
% The user commands \item, \subitem and \subsubitem are used to
% produce the entries, and \indexspace adds an extra vertical space
% that's the right size to put above the first entry with a new letter
% of the alphabet.

\newif\if@restonecol

\def\theindex{\@restonecoltrue\if@twocolumn\@restonecolfalse\fi
\columnseprule \z@
\columnsep 35pt\twocolumn[\@makeschapterhead{Index}]
    \markboth{}{}\thispagestyle{plain}\parindent\z@
    \parskip\z@ plus .3pt\relax\let\item\@idxitem}

\def\@idxitem{\par\hangindent 40pt}

\def\subitem{\par\hangindent 40pt \hspace*{20pt}}

\def\subsubitem{\par\hangindent 40pt \hspace*{30pt}}

\def\endtheindex{\if@restonecol\onecolumn\else\clearpage\fi}

\def\indexspace{\par \vskip 10pt plus 5pt minus 3pt\relax}


%    ****************************************
%    *             FOOTNOTES                *
%    ****************************************
%
% \footnoterule is a macro to draw the rule separating the footnotes from
% the text.  It should take zero vertical space, so it needs a negative
% skip to compensate for any positive space taken by the rule.  (See
% PLAIN.TEX.)

\def\footnoterule{\kern-3\p@   
  \hrule width .4\columnwidth 
  \kern 2.6\p@}                 % The \hrule has default height of .4pt .

% \newcounter{footnote}
\@addtoreset{footnote}{chapter}  % Numbers footnotes within chapters

%   \@makefntext{NOTE} :
%        Must produce the actual footnote, using \@thefnmark as the mark 
%        of the footnote and NOTE as the text.  It is called when effectively
%        inside a \parbox of width \columnwidth (i.e., with \hsize = 
%        \columnwidth).  
%
%        The following macro indents all lines of the footnote by 10pt, and 
%        indents the first line of a new paragraph by 1em.  To change these 
%        dimensions, just substitute the desired value for '10pt' [in both 
%        places] or '1em'.  The mark is flushright against the footnote. 
%          \long\def\@makefntext#1{\@setpar{\@@par\@tempdima \hsize 
%             \advance\@tempdima-10pt\parshape \@ne 10pt \@tempdima}\par
%             \parindent 1em\noindent \hbox to \z@{\hss$^{\@thefnmark}$}#1}
%
%        A simpler macro is used, in which the footnote text is
%        set like an ordinary text paragraph, with no indentation except
%        on the first line of a paragraph, and the first line of the 
%        footnote.  Thus, all the macro must do is set \parindent
%        to the appropriate value for succeeding paragraphs and put the 
%        proper indentation before mark.

\long\def\@makefntext#1{\parindent 1em\noindent 
            \hbox to 1.8em{\hss$^{\@thefnmark}$}#1}

% \@makefnmark : A macro to generate the footnote marker that goes
%    in the text.  Default used.
%



%    ****************************************
%    *         FIGURES AND TABLES           *
%    ****************************************
% 
% Float placement parameters.  See LaTeX manual for their definition.
%
\setcounter{topnumber}{2}
\def\topfraction{.7}
\setcounter{bottomnumber}{1}
\def\bottomfraction{.3}
\setcounter{totalnumber}{3}
\def\textfraction{.2}
\def\floatpagefraction{.5}
\setcounter{dbltopnumber}{2}
\def\dbltopfraction{.7}
\def\dblfloatpagefraction{.5}

% \@makecaption{NUMBER}{TEXT} : Macro to make a figure or table caption.  
%      NUMBER : Figure or table number--e.g., 'Figure 3.2' 
%      TEXT   : The caption text.
%  Macro should be called inside a \parbox of right width, with \normalsize.

\long\def\@makecaption#1#2{
   \vskip 10pt 
   \setbox\@tempboxa\hbox{#1: #2}
   \ifdim \wd\@tempboxa >\hsize   % IF longer than one line:
       \unhbox\@tempboxa\par      %   THEN set as ordinary paragraph.
     \else                        %   ELSE  center.
       \hbox to\hsize{\hfil\box\@tempboxa\hfil}  
   \fi}

% To define a float of type TYPE (e.g., TYPE = figure), the document style 
% must define the following.
%
%  \fps@TYPE   : The default placement specifier for floats of type TYPE.
%
%  \ftype@TYPE : The type number for floats of type TYPE.  Each TYPE has
%                associated a unique positive TYPE NUMBER, which is a power 
%                of two.  E.g., figures might have type number 1, tables type 
%                number 2, programs type number 4, etc.
%
%  \ext@TYPE   : The file extension indicating the file on which the 
%                contents list for float type TYPE is stored.  For example, 
%                \ext@figure = 'lof'.
%
%  \fnum@TYPE  : A macro to generate the figure number for a caption.
%                For example, \fnum@TYPE == Figure \thefigure.
%
%  The actual float-making environment commands--e.g., the commands
%  \figure and \endfigure--are defined in terms of the macros \@float
%  and \end@float, which are described below.
%
%  \@float{TYPE}[PLACEMENT] : Macro to begin a float environment for a 
%     single-column float of type TYPE with PLACEMENT as the placement 
%     specifier.  The default value of PLACEMENT is defined by \fps@TYPE.   
%     The environment is ended by \end@float.  
%     E.g., \figure == \@float{figure}, \endfigure == \end@float.


% FIGURE

\newcounter{figure}[chapter]
\def\thefigure{\thechapter.\@arabic\c@figure}

\def\fps@figure{tbp}
\def\ftype@figure{1}
\def\ext@figure{lof}
\def\fnum@figure{Figure \thefigure}
\def\figure{\@float{figure}}
\let\endfigure\end@float
\@namedef{figure*}{\@dblfloat{figure}}
\@namedef{endfigure*}{\end@dblfloat}

% TABLE
%
\newcounter{table}[chapter]
\def\thetable{\thechapter.\@arabic\c@table}

\def\fps@table{tbp}
\def\ftype@table{2}
\def\ext@table{lot}
\def\fnum@table{Table \thetable}
\def\table{\@float{table}}
\let\endtable\end@float
\@namedef{table*}{\@dblfloat{table}}
\@namedef{endtable*}{\end@dblfloat}


%    ****************************************
%    *         TITLE AND ABSTRACT           *
%    ****************************************
%
%
% Uses same title and abstract format as the article style's
% Uses thesistitlepage option
% titlepage option.

\input thesistitlepage.sty


%    ****************************************
%    *            PAGE STYLES               *
%    ****************************************
%
% The page style 'foo' is defined by defining the command \ps@foo.  This
% command should make only local definitions.  There should be no stray
% spaces in the definition, since they could lead to mysterious extra
% spaces in the output.
%
% The \ps@... command defines the macros \@oddhead, \@oddfoot,
% \@evenhead, and \@evenfoot to define the running heads and
% feet---e.g., \@oddhead is the macro to produce the contents of the
% heading box for odd-numbered pages.  It is called inside an \hbox of
% width \textwidth.
%
% To make headings determined by the sectioning commands, the page style
% defines the commands \chaptermark, \sectionmark, ... , where
% \chaptermark{TEXT} is called by \chapter to set a mark, and so on.
% The \...mark commands and the \...head macros are defined with the
% help of the following macros.  (All the \...mark commands should be
% initialized to no-ops.)
%
% MARKING CONVENTIONS:
% LaTeX extends TeX's \mark facility by producing two kinds of marks
% a 'left' and a 'right' mark, using the following commands:
%     \markboth{LEFT}{RIGHT} : Adds both marks.
%     \markright{RIGHT}      : Adds a 'right' mark.
%     \leftmark  : Used in the \@oddhead, \@oddfoot, \@evenhead or \@evenfoot
%                  macro, gets the current 'left'  mark.  Works like TeX's 
%                  \botmark command.
%     \rightmark : Used in the \@oddhead, \@oddfoot, \@evenhead or \@evenfoot
%                  macro, gets the current 'right'  mark.  Works like TeX's 
%                  \firstmark command.
% The marking commands work reasonably well for right marks 'numbered 
% within' left marks--e.g., the left mark is changed by a \chapter command and
% the right mark is changed by a \section command.  However, it does
% produce somewhat anomalous results if two \bothmark's occur on the same page.
% 
%% (98/03/01) - NM Changed \rm and \sl to \rmfamily and \slshape. Removed
%%              \hbox{} also.
%
\mark{{}{}}   % Initializes TeX's marks

% \def\ps@empty{\def\@oddhead{}
%   \def\@oddfoot{}
%   \def\@evenhead{}\def\@evenfoot{}}
%
% \def\ps@plain{\def\@oddhead{}
%   \def\@oddfoot{\rmfamily\hfil\thepage\hfil}
%   \def\@evenhead{}
%   \let\@evenfoot\@oddfoot}

% Definition of 'headings' page style 
%  Note the use of ##1 for parameter of \def\chaptermark inside the
%  \def\ps@headings.
%

%\if@twoside         % If two-sided printing.
%\def\ps@headings{\def\@oddfoot{}\def\@evenfoot{}%       No feet.
%\def\@evenhead{\rmfamily \thepage\hfil \slshape \leftmark}%   Left heading.
%\def\@oddhead{{\slshape \rightmark}\hfil \rmfamily\thepage}% Right heading.
%\def\chaptermark##1{\markboth {\uppercase{\ifnum \c@secnumdepth >\m@ne
%     \@chapapp\ \thechapter. \ \fi ##1}}{}}%
%\def\sectionmark##1{\markright {\uppercase{\ifnum \c@secnumdepth >\z@
%   \thesection. \ \fi ##1}}}}
%\else               % If one-sided printing.
%\def\ps@headings{\def\@oddfoot{}\def\@evenfoot{}%     No feet.%2009m,
%\def\@oddhead{{\slshape \rightmark} \hfil \rmfamily\thepage}% Heading.%2009nm
%\def\chaptermark##1{\markright {\uppercase{\ifnum \c@secnumdepth >\m@ne%2009nm
%  \@chapapp\ \thechapter. \ \fi ##1}}}}%2009nm
%\fi%2009nm

% Definition of 'myheadings' page style.  
%
%\def\ps@myheadings{\def\@oddhead{{\slshape\rightmark} \hfil \rmfamily\thepage}%
%\def\@oddfoot{}\def\@evenhead{\rmfamily \thepage\hfil\slshape\leftmark}%
%\def\@evenfoot{}\def\sectionmark##1{}\def\subsectionmark##1{}}



%    ****************************************
%    *            MISCELLANEOUS             *
%    ****************************************
%
% DATE
%
\def\today{\ifcase\month\or
  January\or February\or March\or April\or May\or June\or
  July\or August\or September\or October\or November\or December\fi
  \space\number\day, \number\year}

% EQUATION and EQNARRAY -- put here because it must follow \chapter definition
%
% \newcounter{equation}    
%
\@addtoreset{equation}{chapter}   % Makes \chapter reset 'equation' counter.

\def\theequation{\thechapter.\arabic{equation}}

% \jot = 3pt      % Extra space added between lines of an eqnarray environment

% The macro \@eqnnum defines how equation numbers are to appear in equations.
%
% \def\@eqnnum{(\theequation)} 
% 


%    ****************************************
%    *           INITIALIZATION             *
%    ****************************************
%
% Default initializations

\thesis{thesis}   % default thesis rather than dissertation
%\ps@myheadings                   % 'myheadings' page style
\pagenumbering{arabic}      % Arabic page numbers
\onecolumn                  % Single-column.
\if@twoside\else\raggedbottom\fi % Ragged bottom unless twoside option.
\setstretch{1.7}                % Initial baselinestretch


Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.