Subversion Repositories phr

\usepackage[dvips]{graphicx}
\usepackage{latexsym}
\usepackage{rotating}

% Try uncommenting the following line if fonts don't
% display correctly in the PDF file.
%\usepackage{pslatex} 

% To use palatino font, uncomment the following line.
%\usepackage{mathpazo}

% To use times roman font, uncomment the following line.
%\usepackage{mathptmx}

% For other fonts, see http://www.tug.org/fonts/

\oddsidemargin = .5in
\textwidth = 6in

\headheight = 0in
\headsep = 0in
\topmargin = .25in
\textheight = 8.5in

\floatsep = .29in
\textfloatsep = \floatsep
\intextsep = \floatsep

% To have the references sorted in the order they are cited,
% (instead of alphabetically), use 'unsrt' instead of 'abbrv'.
%
\bibliographystyle{abbrv}

\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}

% Almost everything is double spaced.
%
\newcommand{\spacing}{1.8}
\renewcommand{\baselinestretch}{\spacing}

% Footnotes are to be single spaced.
%
\newcommand{\munfootnote}[1]{%
        \renewcommand{\baselinestretch}{1.0}%
        \normalsize
        \footnote{#1}%
        \renewcommand{\baselinestretch}{\spacing}%
        \normalsize
}

% Lengthy quotes must also be single spaced.
% We provide a parameter for the citation label too.
%
\newenvironment{munquote}[1][]{%
        \renewcommand{\baselinestretch}{1.0}%
        \normalsize
        \def\muncite{#1}
        \vspace{1.5mm}
        \begin{quote}\sl``}{''\muncite
        \end{quote}
        \renewcommand{\baselinestretch}{\spacing}%
        \normalsize
}

% Command for creating the thesis title page in accordance with the
% requirements of the School of Graduate Studies.
% For usage example, see thesis.tex.
%
\newcommand{\thesistitle}[5]{%
\thispagestyle{empty}
\begin{center}

\renewcommand{\baselinestretch}{1.0}%
\textbf{\Large #1}
\renewcommand{\baselinestretch}{\spacing}%

\vspace{1.0cm}

by \\
\copyright\ #2

\vspace{\fill}

\vspace{\fill}

A thesis submitted to the \\
School of Graduate Studies \\
in partial fulfilment of the \\
requirements for the degree of \\
#3 \\

\vspace{\fill}

#4 \\
Memorial University of Newfoundland

\vspace{\fill}

#5 \\

\vspace{\fill}

St. John's \hfill Newfoundland
\end{center}
}

% The \munepsfig command is used to insert a new EPS figure 
% into our document.  Usage is:
%
%       \munepsfig[args]{filename}{caption}
%
% where:
%       - the optional 'args' argument is passed to the
%         embedded \includegraphics command, this can be used
%         to scale the figure or rotate it.
%       - 'filename' is the name of the EPS file in the 'figures'
%         directory that is to be inserted (note that 'filename'
%         should not include the '.eps' extension).
%       - 'filename' also serves as the label for the figure.
%         with the text 'fig:' prepended.
%
% Sample Usage:
%       \munepsfig[scale=0.5,angle=90]{barchart}{Population over time}

% inserts the EPS file 'figures/barchart.eps' reduced in size by 50%
% rotated 90 degrees and with the caption "Popuation over Time."
% We can refer to that figure as Figure~\ref{fig:barchart} in the text.
%
\newcommand{\munepsfig}[3][scale=1.0]{%
        \begin{figure}[!htbp]
                \centering
                \vspace{2mm}
                \includegraphics[#1]{figures/#2.eps}
                \caption{#3}
                \label{fig:#2}
        \end{figure}
}

% \munlepsfig command inserts a figure in landscape mode.  The
% entire page is rotated to accommodate the figure.  The arguments
% are the same as for \munepsfig, above
%
\newcommand{\munlepsfig}[3][scale=1.0]{%
        \begin{sidewaysfigure}[!htbp]
                \centering
                \vspace{2mm}
                \includegraphics[#1]{figures/#2.eps}
                \caption{#3}
                \label{fig:#2}
        \end{sidewaysfigure}
}

% The 'muntxtfig' environment is used to insert 'textual' figures
% into our document, such as brief source code snippets.  Usage is:
%
%       \begin{muntxtfig}[spacing]{label}{caption}{width}
%         text for 'figure'
%       \end{muntxtfig}
%
% where:
%       - 'spacing' is a number representing the baselinestretch
%         (line-spacing) to use for the text figure.  Default is
%          single-spacing.
%       - 'label' is the label to be used for referencing.
%          The figure can be referenced as Figure~\ref{fig:label}.
%       - 'caption' is the caption to display below the figure.
%       - 'width' is the width of the minipage in which the text figure
%         is formatted.
%
% Sample usage:
% \begin{muntxtfig}[1.0]{code}{Hello World}{0.5\textwidth}
%   Some text
% \end{muntxtfig}
%
\newenvironment{muntxtfig}[4][\spacing]{%
        \begin{figure}[!htbp]
                \centering
                \def\muncaption{#3}%
                \def\munlabel{#2}%
                \renewcommand{\baselinestretch}{#1}%
                \normalsize%
                \begin{minipage}{#4}
                \hrule \hrule
                \bigskip
}{%
                \hrule \hrule
                \end{minipage}
                \renewcommand{\baselinestretch}{\spacing}%
                \normalsize%
                \caption{\muncaption}
                \label{fig:\munlabel}
        \end{figure}
}

% The 'muntab' environment is used to insert a new table into our document.
% Usage is:
%
%       \begin{muntab}{table_format}{label}{caption}
%        table contents
%       \end{muntab}
%
% where:
%       - 'label' is the label used to reference the Table.
%          We can refer to the table as Table~\ref{tab:label} in
%          the text.
%       - 'caption' is the caption placed above the Table.
%
%
\newenvironment{muntab}[3]{%
        \begin{table}[!htbp]
                \centering
                \caption{#3}
                \label{tab:#2}
                \vspace{2mm}
                \begin{tabular}{#1}
}{%
                \end{tabular}
        \end{table}
}

% The 'munltab' environment is like muntab, but displays the table
% in landscape mode on its own page.  See muntab environment for usage.
%
\newenvironment{munltab}[3]{%
        \begin{sidewaystable}
                \centering
                \caption{#3}
                \label{tab:#2}
                \vspace{2mm}
                \begin{tabular}{#1}
}{%
                \end{tabular}
        \end{sidewaystable}
}

% The \muneqn environment is used to add an equation to the thesis.
% Usage is:
%
%       \begin{muneqn}{label}
%         equation body
%       \end{muneqn}
%
% where:
%       - 'label' is the label used to reference the Equation.
%          We can refer to the equation as Table~\ref{eqn:label} in
%          the text.
%
\newenvironment{muneqn}[1]{%
        \begin{equation}
                \label{eqn:#1}
}{
        \end{equation}
}

%
% For theorems and corollaries.
%
\newtheorem{cor}{Corollary}
\newtheorem{thm}{Theorem}