URL
https://opencores.org/ocsvn/phr/phr/trunk
Subversion Repositories phr
[/] [phr/] [trunk/] [doc/] [informe-tesis/] [template/] [phd-thesis-template-master/] [Makefile] - Rev 219
Go to most recent revision | Compare with Previous | Blame | View Log
# Copyright 2004 Chris Monson (shiblon@gmail.com)# Latest version available at http://www.bouncingchairs.net/oss## This file is part of ``Chris Monson's Free Software''.## ``Chris Monson's Free Software'' is free software; you can redistribute it# and/or modify it under the terms of the GNU General Public License as# published by the Free Software Foundation, Version 2.## ``Chris Monson's Free Software'' is distributed in the hope that it will# be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General# Public License for more details.## You should have received a copy of the GNU General Public License along# with ``Chris Monson's Free Software''; if not, write to the Free Software# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA## It is also available on the web at http://www.gnu.org/copyleft/gpl.html## Note that using this makefile to build your documents does NOT place them# under the GPL unless you, the author, specifically do so. In other words,# I, Chris Monson, the copyright holder and author of this makefile,# consider it impossible to ``link'' to this makefile in any way covered by# the GPL.### TO OBTAIN INSTRUCTIONS FOR USING THIS FILE, RUN:# make help#fileinfo := LaTeX Makefileauthor := Chris Monsonversion := 2.2.1-alpha9#.DEFAULT_GOAL := all# Note that the user-global version is imported *after* the source directory,# so that you can use stuff like ?= to get proper override behavior..PHONY: Makefile GNUmakefile Makefile.ini $(HOME)/.latex-makefile/Makefile.ini-include Makefile.ini-include $(HOME)/.latex-makefile/Makefile.ini# Better names for these things.PHONY: Variables.ini $(HOME)/.latex-makefile/Variables.ini-include Variables.ini-include $(HOME)/.latex-makefile/Variables.ini## This can be pdflatex or latex - you can change this by adding the following line to your Makefile.ini:# BUILD_STRATEGY := latexBUILD_STRATEGY ?= pdflatex# This can be used to pass extra options to latex.LATEX_OPTS ?=## Sets LC_ALL=C, by default, so that the locale-aware tools, like sort, be# # immune to changes to the locale in the user environment.export LC_ALL ?= C### If you specify sources here, all other files with the same suffix# will be treated as if they were _include_ files.#onlysources.tex ?= main.tex#onlysources.lhs ?=#onlysources.tex.sh ?=#onlysources.tex.pl ?=#onlysources.tex.py ?=#onlysources.rst ?=#onlysources.mp ?=#onlysources.fig ?=#onlysources.gpi ?=#onlysources.dot ?=#onlysources.xvg ?=#onlysources.svg ?=#onlysources.eps.gz ?=#onlysources.eps ?=## If you list files here, they will be treated as _include_ files#includes.tex ?= file1.tex file2.tex#includes.lhs ?=#includes.tex.sh ?=#includes.tex.pl ?=#includes.tex.py ?=#includes.rst ?=#includes.mp ?=#includes.fig ?=#includes.gpi ?=#includes.dot ?=#includes.xvg ?=#includes.svg ?=#includes.eps.gz ?=#includes.eps ?=## If you list files or wildcards here, they will *not* be cleaned - default is# to allow everything to be cleaned.#neverclean ?= *.pdf## Alternatively (recommended), you can add those lines to a Makefile.ini file# and it will get picked up automatically without your having to edit this# Makefile.## KNOWN ISSUES:# * The following occurs:# file with: \usepackage{named}\bibliographystyle{named}# Compile# change to: \usepackage{apalike}\bibliographystyle{apalike}# Compile again -- BARF!## The workaround: make clean-nographics; make## Note that we may not be able to fix this. LaTeX itself barfs# on this, not the makefile. The very first invocation of LaTeX# (when something like this has happened) reads the existing .aux# file and discovers invalid commands like \citeauthoryear that# are only valid in the package that was just removed. It then# tries to parse them and explodes. It's not at all clear to me# how to fix this. I tried removing the .aux files on the first# run of LaTeX, but that necessarily requires more subsequent# rebuilds on common edits. There does not appear to be a# graceful solution to this issue.### CHANGES:# Krishna Kumar (2013-11-27):# * Added PS to rm_ext to remove PS files generated during LaTeX output# Krishna Kumar (2013-11-26):# * Changed PS_EMBED_OPTION ?= -dPDFSETTINGS=/prepress from /printer## Chris Monson (2012-06-25):# * Bumped version to 2.2.1-alpha9# * Built with Holger Dell's changes to fix multiple unnecessary compilations.# Chris Monson (2011-11-10):# * Issue 144: Help patch from girard.nicolas applied# Andrew McNabb (2011-09-30):# * Bumped version to 2.2.1-alpha8# * Issue 141: No font embedding for gnuplot when not doing pdf# * Syntax error fixed for gpi handling code# Chris Monson (2011-09-06):# * Issue 140: clean mlt*, mlf*, and mtc* files# * Issue 136: initial support for metapost files# Chris Monson (2011-08-09):# * Bumped version to 2.2.1-alpha7# * Issue 138: existing .eps files now included correctly# * Issue 139: added missing backslash to ps build rule# Chris Monson (2011-07-20):# * Added LATEX_OPTS# Chris Monson (2011-06-23):# * Bumped version to 2.2.1-alpha6# * Issue 133: Set jobname to fix .fls generation to always have the source name# * Removed unnecessary (?) double-invocation of cygpath# Chris Monson (2011-06-16):# * Added support for keeping .rst and .lhs tex intermediates around.# * Separated scripts from source generation files (rst and lhs)# * Fixed run-script problem for lhs2tex (was invoked incorrectly)# * Issue 133: Fixed typo from literate Haskell support# Chris Monson (2011-06-13):# * Bumped version to 2.2.1-alpha5# * Fixed problems with detecting graphics for very long source names.# Chris Monson (2011-06-13):# * Issue 134: name of self corrected for dependency graph# * Issue 133: Added literate Haskell support (lhs2tex)# Chris Monson (2011-05-31):# * Rewrote specials (%%COMMENTS) to be easier to extend and parse.# Chris Monson (2011-05-11):# * Bumped version to 2.2.1-alpha4# * Issue 129: nomenclature dependency fix# Chris Monson (2011-05-09):# * Bumped version to 2.2.1-alpha3# * Issue 112: Cygpath fixes# Chris Monson (2011-04-27):# * Bumped version to 2.2.1-alpha2# * Issue 126: Broken log parsing for latex pipeline# * Fixed month in recent changes (had May, should be April)# * Noticed problems with some existing parsing (colorizing errors, notably) and# fixed them.# * New test case for specified graphic extensions.# * Added .bb generation for .eps files (when extensionless in latex pipeline)# Chris Monson (2011-04-22):# * Bumped version to 2.2.1-alpha1# * Issue 105: add support for format file detection and compilation# Chris Monson (2011-04-20):# * Bumped version to 2.2.0 (release!)# Chris Monson (2011-04-19):# * Bumped version to 2.2.0-rc15# * Issue 125: infinite recursion with nomenclature files# * Issue 125: removed .d as a target for .nls in get-log-index# * Cleaned up invocation of run-makeindex to take an optional .ist instead of flags.# Chris Monson (2011-04-06):# * Bumped version to 2.2.0-rc14# * Issue 121: Added Targets.ini and corresponding help text for it.# * Issue 121: Added Variables.ini (Makefile.ini still works, though).# * Issue 121: Added .DEFAULT_GOAL optional setting.# * Issue 120: xindy compatibility# Chris Monson (2011-03-16):# * Bumped version to 2.2.0-rc13# * Fixed a bug in kspewhich invocation - random characters and a missing pipe.# * Added font embedding to gnuplot output.# Chris Monson (2011-03-15):# * Bumped version to 2.2.0-rc12# * Issue 119: Annoying warning from which if Gnuplot not installed.# * Fixed catchall error output to show more info from the log. Cutting off the# first line is too jarring.# * Issue 118: Better glossary support# Chris Monson (2011-03-03):# * Bumped version to 2.2.0-rc11# * Issue 112: Fixed regression introduced by use of cygpath (ugly warnings)# Chris Monson (2011-02-03):# * Bumped version to 2.2.0-rc10# * Issue 112: Added path normalization for cygwin systems# * Fixed a bug in get-missing-inputs where we weren't specifying target files# Chris Monson (2011-01-24):# * Issue 111: Added .jpeg as a possible image extension# Chris Monson (2011-01-21):# * Issue 110: Long filenames not produced correctly in .d file# * Fixed problem with unknown control sequence error parsing# * Fixed problem with \r in fatal output (was interpreted as LF by echo)# * Removed a spurious "hi"# Chris Monson (2011-01-14):# * Bumped version to 2.2.0-rc8# * Issue 107: Removed comment with embedded newline, fixing MinGW on Windows 7.# Chris Monson (2011-01-07):# * Emit an error if .gpi.d files have dependencies with : in the name# Chris Monson (2011-01-05):# * Bumped version to 2.2.0-rc7# * Issue 106: existing graphic dependencies not generated correctly# Chris Monson (2011-01-04):# * Issue 106: not cleaning eps log files properly# * Issue 106: not rebuilding after creating .pdf graphics from .eps# * Issue 94: svg going unnecessarily through eps (can't reproduce)# Chris Monson (2010-12-31):# * Issue 100: make hanging because of faulty graphics detection (sed bug)# * Issue 108: do not ignore fatal errors from pdftex# Chris Monson (2010-12-23):# * Added gpi_global to gnuplot dependencies so that changes are detected# Chris Monson (2010-12-20):# * Updated build file to be smarter about Python version detection# * Created a bunch of test files and supporting scripts# * Issue 72: added apacite capaability (thanks to matkarat)# Chris Monson (2010-11-23):# * Changed to multi-part makefile build (split out sed scripts)# * Added build script and supporting infrastructure# * Updated test directory format# * Added notes about needed test cases# * Changed to use -file-line-error and fixed multiple inclusion/error bugs# * Added run_sed.py to allow easy testing of sed scripts outside of make# Chris Monson (2010-11-11):# * Bumped version to 2.2.0-rc7# * issue 92: broken hyperref driver detection fixed# * issue 101: Broken inkscape conversion# * issue 102: Broken specification of font size for gnuplot pdfcairo# * Added KEEP_TEMP so that we can avoid deleting useful temporaries for debugging# * Restructured gnuplot code to be easier to follow# * Fixed a bug in convert-gpi where we were using $< instead of $1# Chris Monson (2010-11-03):# * Bumped version to 2.2.0-rc6# * issue 96: Fix sed errors when using make variables in substitutions# Chris Monson (2010-07-28):# * Bumped version to 2.2.0-rc5 (rc4 is broken)# * Bail out when we find the use of the import.sty package# * Issue 90: Add -z to dvips invocation# * Issue 67: Add xelatex support (thanks to Nikolai Prokoschenko for the patch!)# * Issue 85: Add warning about make 3.80# Chris Monson (2010-06-20):# * Bumped version to 2.2.0-rc3# * Attempt to fix bug with ! error detection (issue 88)# * Added svg->pdf direct support (issue 89)# Chris Monson (2010-04-28):# * Bumped version to 2.2.0-rc2# * Fixed %._show target# Chris Monson (2010-04-08):# * Bumped version to 2.2.0-rc1# * Added back in the rst_style_file stuff that got broken when switching# rst -> tex to use the script mechanism# Chris Monson (2010-03-23):# * Bumped version to 2.2.0-beta8# * Work on issue 76: bad backtick escape for some sed versions, failure# to clear out the hold buffer when outputting MISSING comment.# - Backed out 2>&1 to &> (doesn't work in sh)# - Backed out using . to source variables# Chris Monson (2010-03-22):# * Bumped version to 2.2.0-beta7# * Issue 72: Fix latex/bibtex invocation order for annotated bib styles# * Fixed informational output to reflect which LaTeX run we're on# * Fixed graphic detection to include graphics that are already there in# .d files# * Tightened up the .d file output to only make .d depend on graphic# *source* files. This means that building foo.d no longer# builds all of the graphics files on which foo.tex depends.# Had to use .SECONDEXPANSION trickery to make it work.# * Changed get-graphics to only accept a stem.# * Fixed build-once logic for scripted .tex to work better# * Made get-inputs sed script more maintainable.# * Moved Makefile.ini import up higher.# * Changed bare stems to not recursively invoke make# * Updated diff output to be more silent everywhere# * Added a MISSING comment to the .d file if stuff isn't found - forces# removal of .1st.make file, which often forces it to try again.# * Fixed broken graphics-target function# * Added sleep to .d file generation when stuff is missing - if it# builds too fast, make doesn't realize it needs to be reloaded,# and thus never discovers some deeper dependencies (especially# evident when graphics are included from scripted include# files).# Chris Monson (2010-03-17):# * Bumped version to 2.2.0-beta6# * Fixed bareword builds to actually work (requires static patterns)# * Fixed colorization to work with new paragraph stuff# Chris Monson (2010-03-17):# * Bumped version to 2.2.0-beta5# * Fixed graphic detection to be much more focused - splits log file# into paragraphs before doing pattern matching.# * Fixed make foo to work properly (recursively calls make foo.pdf)# * Fixed gpi -> pdf generation to not waste time building .eps *after*# the pdf already exists.# * Changed log copies to include MAKE_RESTARTS as part of the name.# * Fixed missing include file detection (also makes use of the paragraph# stuff) to detect missing scripted include files.# Chris Monson (2010-03-16):# * Bumped version to 2.2.0-beta4# * issue 70: .pdf not moved out of the way properly on first# compilation, resulting in early error detection failure.# * issue 74: fixed broken error on missing .aux files: the# implementation was masking real errors.# Chris Monson (2010-03-15):# * Bumped version to 2.2.0-beta3# * issue 71: Made the tput dependency optional# * issue 73: Made .tex targets not pull in .d files (building them from# scripts should not require a .d)# * issue 74: Output a much saner error when a .aux file is not produced# (e.g., when you are typing "make" without arguments in a# directory with included .tex files that are not named with# ._include_.)# Chris Monson (2010-03-11):# * Bumped version to 2.2.0-beta2# * Fixed clean-graphics to get rid of intermediate .eps files that may# be hanging around# * Added an automatic setting to use eps terminals in pdflatex mode for# gnuplot if it doesn't understand pdf.# * issue 66: Removed grayscale generation via magic suffix. Grayscale# generation is now only available via GRAY=1# * issue 68: Added explicit handling of LC_ALL for locale-aware tools# like "sort"# Chris Monson (2010-03-10):# * Bumped version to 2.2.0-beta1# * Fixed success message to handle output message in different places# * Added name of produced file to success message# Chris Monson (2010-03-10):# * Bumped version to 2.2.0-alpha3# * Added meaningful error message for wrong hyperref options# * Added meaningful error message for incorrect graphics extensions# Chris Monson (2010-03-09):# * Bumped version to 2.2.0-alpha2# * Updated graphics handling (gnuplot and fig generate pdf natively)# * Changed xmgrace to output monochrome natively# Chris Monson (2010-03-09):# * Bumped version to 2.2.0-alpha1 - major change!# * Support pdflatex natively and by default (issue 6 - a long time coming)# * Add ability to have a single $HOME/.latex-makefile/Makefile.ini for# all invocations# * Reworked graphic inclusion detection so that extensions need not be# specified for either build strategy (e.g.,# \includegraphics{test1.eps} -> \includegrahpics{test1})# * Changed log format to include filenames and line numbers# Chris Monson (2010-02-04):# * Bumped version to 2.1.43# * All of the following are for issue 63 (thanks to mojoh81):# * Added documentation about fixing Makefile.ini default target# * Added perl and python script targets# * Fixed run logic to allow included .tex files to be scripted (the# run-again logic now detects missing .tex files, and the MV# command has been switched out for a command that only invokes# MV if the files exist)# * Changed scripted generation to only run once per make invocation# * Added dependency on expr# Chris Monson (2010-01-19):# * Bumped version to 2.1.42# * issue 62: Added .brf extension to cleanable files (backrefs)# Chris Monson (2010-01-07):# * Bumped version to 2.1.41# * issue 60: bad makeindex runs now error out on subsequent tries# Chris Monson (2009-12-01):# * Bumped version to 2.1.40# * issue 36: build all indices (for e.g., splitidx usage)# * issue 59: clean up all generated files (including indices)# Chris Monson (2009-11-23):# * Bumped version to 2.1.39# * issue 57: change ps2pdf invocations to just use gs directly# Chris Monson (2009-11-19):# * Bumped version to 2.1.38# * issue 57: Added some limited support for Cygwin (spaces in filenames)# Chris Monson (2009-11-15):# * Bumped version to 2.1.37# * Removed svninfo, since this is now managed by mercurial# * Fixed typo in changelist# * Issue 52: added jpg->eps conversion (thanks to brubakee)# * Issue 54: fix missing Overfull colorization due to lack of a blank# line preceding the first error.# * Issue 51: remove head.tmp and body.tmp in make clean invocation# * Issue 56: maintain multiple versions of log files (for debugging)# Chris Monson (2009-11-14):# * Bumped version to 2.1.36# * Issues 53 and 49: added .brf, .mtc, and .maf to the cleanables# Chris Monson (2009-11-05):# * Bumped version to 2.1.35# * Added nomenclature support (see issue 48)# Chris Monson (2009-10-29):# * Bumped version to 2.1.34# * Fixed _out_ creation bug introduced in 2.1.33 (it was always created)# * Fixed erroneous help output for $HOME in BINARY_TARGET_DIR# * Changed contact email address - bring on the spam!# Chris Monson (2009-10-21):# * Bumped version to 2.1.33# * Fixed issue 46, adding support for dot2tex (thanks to fdemesmay)# * Made all_files.* settable in Makefile.ini (using ?= instead of :=)# * Fixed issue 47, thanks to fdemesmay: add binary copy directory, copy# dvi, pdf, and ps if it exists# Chris Monson (2009-09-25):# * Bumped version to 2.1.32# * Fixed so that a changed lol file will cause a rebuild# * Added .lol files to the cleanable list# Chris Monson (2009-09-08):# * Bumped version to 2.1.31# * Closed issue 43: evince doesn't notice pdf change w/out touch# Chris Monson (2009-08-28):# * Bumped version to 2.1.30# * Closed issue 39: Capture multi-line log warnings/errors to output# Chris Monson (2009-08-26):# * Bumped version to 2.1.29# * Closed issue 42: add svg support using inkscape# Chris Monson (2009-08-17):# * Bumped version to 2.1.28# * Patch from paul.biggar for issue 38: package warnings are overlooked# Chris Monson (2009-08-07):# * Bumped version to 2.1.27# * Included patch for issue 37 - removes pdf/ps files before copying,# allowing some broken viewers to see changes properly.# Chris Monson (2009-05-15):# * Bumped version to 2.1.26# * Included patch for issue 9 from favonia - detects .fig changes for# pstex files during regular compilation, so long as the pstex# has been built at least once with make all-pstex.# Chris Monson (2009-03-27):# * Bumped version to 2.1.25# * Cleaned up a bunch of variable setting stuff - more stuff is now# settable from Makefile.ini# * Cleaned up documentation for various features, especially settable# variables.# * issue 28: support for png -> eps conversion (it even looks good!)# * issue 29: support for "neverclean" files in Makefile.ini# * issue 30: make ps2pdf14 the default - fall back when not there# Chris Monson (2009-03-09):# * Bumped version to 2.1.24# * issue 27: xmgrace support (thanks to rolandschulzhd)# Chris Monson (2008-10-23):# * Bumped version to 2.1.23# * issue 23: fixed _check_programs to not use bash string subs# Chris Monson (2008-09-02):# * Bumped version to 2.1.22# * Appled patch from Holger <yllohy@googlemail.com> to add include# sources and some documentation updates.# * Updated backup_patterns to be a bit more aggressive (also thanks to# Holger)# Chris Monson (2008-08-30):# * Bumped version to 2.1.21# * Added ability to specify onlysources.* variables to indicate the only# files that should *not* be considered includes. Thanks to Holger# <yllohy@googlemail.com> for this patch.# * Added an automatic include of Makefile.ini if it exists. Allows# settings to be made outside of this makefile.# Chris Monson (2008-05-21):# * Bumped version to 2.1.20# * Added manual pstex compilation support (run make all-pstex first)# * Removed all automatic pstex support. It was totally breaking# everything and is very hard to incorporate into the makefile# concept because it requires LaTeX to *fail* before it can# determine that it needs the files.# Chris Monson (2008-04-17):# * Bumped version to 2.1.19# * Changed the pstex build hack to be on by default# Chris Monson (2008-04-09):# * Bumped version to 2.1.18# * issue 16: fixed pstex build problems, seems nondeterministic. Added# gratuitious hack for testing: set PSTEX_BUILD_ALL_HACK=1.# Chris Monson (2008-04-09):# * Bumped version to 2.1.17# * issue 20: fixed accumulation of <pid>*.make files - wildcard was# refusing to work on files that are very recently created.# Chris Monson (2008-04-02):# * Bumped version to 2.1.16# * issue 19: Removed the use of "type" to fix broken "echo" settings# Chris Monson (2008-03-27):# * Bumped version to 2.1.15# * issue 18: Favors binary echo over builtin, as binary understands -n# * issue 16: Fixed handling of missing pstex_t files in the log# * issue 9: Added .SECONDARY target for .pstex files# Chris Monson (2008-03-21):# * Bumped version to 2.1.14# * Fixed broken aux file flattening, which caused included bibs to be# missed.# Chris Monson (2008-03-20):# * Bumped version to 2.1.13# * Changed error output colorization to show errors for missing files# that are not graphics files.# Chris Monson (2008-03-20):# * Bumped version to 2.1.12# * Fixed a regression introduced in r28 that makes bibtex fail when# there is no index file present# Chris Monson (2008-03-03):# * Bumped version to 2.1.11# * Fixed issue 11 (handle index files, reported by abachn)# * Cleaned up some comments and help text# Chris Monson (2008-01-24):# * Bumped version to 2.1.10# * Fixed to work when 'sh' is a POSIX shell like 'dash'# Chris Monson (2007-12-12):# * Bumped version to 2.1.9# * Fixed documentation and dependency graph for pstex files# Chris Monson (2007-12-12):# * Bumped version to 2.1.8# * Added basic pstex_t support for fig files (Issue 9 by favonia)# I still suggest that psfrag be used instead.# Chris Monson (2007-10-16):# * Bumped version to 2.1.7# * Removed todo item: allow other comment directives for rst conversion# * Added ability to use global rst style file _rststyle_._include_.tex# * Added help text to that effect# Chris Monson (2007-05-20):# * Bumped version to 2.1.6# * Changed default paper size for rst files# * Added todo item: fix paper size for rst files# * Added todo item: allow other comment directives for rst conversion# Chris Monson (2007-04-02):# * Bumped version to 2.1.5# * Addressed Issue 7, incorrect .gpi.d generation in subdirectories# Chris Monson (2007-03-28):# * Bumped version to 2.1.4# * Fixed syntax error in dot output# Chris Monson (2007-03-01):# * Bumped version to 2.1.3# * Added reST to the included documentation# * Fixed graphics and script generation to be settable in the# environment.# Chris Monson (2007-02-23):# * Bumped version to 2.1.2# * Added the ability to generate .tex files from .rst files# Chris Monson (2006-10-17):# * Bumped version to 2.1.1# * Fixed includes from subdirectories (sed-to-sed slash escape problem)# Chris Monson (2006-10-05):# * Bumped version to 2.1.0 (pretty serious new feature added)# * New feature: bib files can now be anywhere on the BIBINPUTS path# * New programs: kpsewhich (with tetex) and xargs (BSD)# Chris Monson (2006-09-28):# * Bumped version to 2.0.9# * Added ability to parse more than one bibliography# Chris Monson (2006-06-01):# * Bumped version to 2.0.8# * Added .vrb to the list of cleaned files# Chris Monson (2006-04-26):# * Bumped version to 2.0.7# * Fixed so that clean-nographics does not remove .gpi.d files# * Removed jpg -> eps hack (not working properly -- just pre-convert)# * Fixed so that postscript grayscale can be done with BSD sed# Chris Monson (2006-04-25):# * Bumped version to 2.0.6# * Fixed so that changed toc, lot, lof, or out causes a rebuild# Chris Monson (2006-04-17):# * Bumped version to 2.0.5# * Added jpg -> eps conversion target# Chris Monson (2006-04-12):# * Bumped version to 2.0.4# * Fixed BSD sed invocation to not use \| as a branch delimiter# * Added a comment section on what is and is not allowed in BSD sed# * Made paper size handling more robust while I was at it# * Fixed postscript RGB grayscale to use a weighted average# * Fixed postscript HSB grayscale to convert to RGB first# * Fixed a problem with rebuilding .bbl files# Chris Monson (2006-04-11):# * Bumped version to 2.0.3# * Fixed some BSD sed problems: can't use \n in substitutions# Chris Monson (2006-04-10):# * Bumped version to 2.0.2# * Once again removed ability to create .tex files from scripts# * \includeonly works again# Chris Monson (2006-04-09):# * Bumped version to 2.0.1# * Fixed grayscale postscript handling to be more robust# * Added ability to generate ._gray_. files from eps and eps.gz# * Added ability to clean ._gray_.eps files created from .eps files# Chris Monson (2006-04-07):# * Bumped version to 2.0.0# * Removed clunky ability to create included .tex files from scripts# * Added note in the help about included tex scripting not working# * Fixed the .eps generation to delete %.gpihead.make when finished# * Abandoned designs to use shell variables to create sed scripts# * Abandoned __default__.tex.sh idea: it causes recursion with %: .# * Removed web page to-do. All items are now complete.# * Added better grayscale conversion for dot figures (direct ps fixup).# * Include files can now be scripted (at the expense of \includeonly).# * Updated dependency graph to contain better node names.# Chris Monson (2006-04-06):# * Bumped version to 2.0b3# * Top level includes now fail if there is no rule to build them# * A helpful message is printed when they do fail# * Grayscale has been changed to be ._gray_, other phonies use _ now, too# * Grayscale handling has been completed# * Changed _include_stems target to _includes target.# * Fixed _includes target to be useful by itself.# * Removed the ability to specify clean and build targets at once# * Verified that epsfig works fine with current code# * Fixed included scripts so that they are added to the dep files# * Fixed so that graphics includes don't happen if they aren't for gpi# * Fixed dot output to allow grayscale.# Chris Monson (2006-04-05):# * Bumped version to 2.0b2# * Removed automatic -gray output. It needs fixing in a bad way.# * Revamped dependency creation completely.# * Fixed conditional inclusion to actually work (test.nobuild.d, test.d).# * Fixed clean target to remove log targets# * Added the 'monochrome' word for gray gpi output# * Added a _check_gpi_files target that checks for common problems# * Changed the _version target into the version target (no _)# * Added better handling of grayscale files. Use the .gray.pdf target.# * Fixed testing for rebuilds# Chris Monson (2006-04-04):# * Bumped version to 2.0b1# * Changed colorization of output# * Made .auxbbl and .auxtex .make files secondary targets# * Shortened and simplified the final latex invocation loop# * Added version-specific output ($$i vs. $$$$i) in latex loop# * Added a build message for the first .dvi run (Building .dvi (0))# * Removed some build messages that most people don't care about.# * Simplified procedure for user-set colors -- simple text specification# * Fixed diff output to...not output.# * Fixed rerun bug -- detect not only when preceded with LaTeX Warning# * Sped up gpi plotting# * Added error handling and colorized output for gpi failure# * Documented color changing stuff.# * Now sort the flattened aux file to avoid false recompilation needs# * Added clean-nographics target# * Don't remove self.dvi file if self.aux is missing in the log# * Clarified some code. Did some very minor adjusting.# Chris Monson (2006-04-03):# * Bumped version to 2.0a7# * Added .dvi and .ps files as secondary files.# * Fixed handling of multiple run detection when includeonly is in use.# * Added code to flatten .aux files.# * Added more files as .SECONDARY prerequisites to avoid recompilation.# * Fixed the inputs generation to be much simpler and to use pipes.# * Added the dependency graph directly into the makefile.# * Changed flatten-aux to remove \@writefile \relax \newlabel, etc.# * Undid pipe changes with sed usage (BSD sed doesn't know -f-).# * Added a _check_programs target that tells you what your system has.# * Fixed an error in colorization that made unnecessary errors appear# * Added view targets.# * Updated help text.# * Augmented cookies so that .aux can trigger .bbl and .dvi rebuilds# * Added more informative error handling for dvips and ps2pdf# Chris Monson (2006-04-02):# * Bumped version to 2.0a6# * Added indirection to .bbl dependencies to avoid rebuilding .bbl files# * Streamlined the diff invocation to eliminate an existence test# * Removed special shell quote escape variables# * Moved includes to a more prominent location# * Fixed .inputs.make to not contain .aux files# * Fixed embedding to use a file instead of always grepping.# * Added *.make.temp to the list of cleanable files# * Fixed Ruby. It should now be supported properly.# * Now differentiate between all, default, and buildable files.# * Fixed to bail out on serious errors.# * Revised the handling of includable files. Still working on it.# Chris Monson (2006-03-31):# * Bumped version to 2.0a5# * Fixed a bug with LaTeX error detection (there can be spaces)# * Added .bbl support, simplifying everything and making it more correct# * Refactored some tests that muddy the code# * Did a little cleanup of some shell loops that can safely be make loops# * Added support for graphviz .dot files# * Made _all_programs output easier to read# * Added the ruby support that has long been advertised# * Font embedding was screwed up for PostScript -- now implicit# * Changed the generation of -gray.gpi files to a single command# * Changed any make-generated file that is not included from .d to .make# Chris Monson (2006-03-30):# * Bumped version to 2.0a4# * Fixed a bug with very long graphics file names# * Added a todo entry for epsfig support# * Fixed a bug paper size bug: sometimes more than one entry appears# * Fixed DVI build echoing to display the number instead of process ID# * DVI files are now removed on first invocation if ANY file is missing# * Added a simple grayscale approach: if a file ends with -gray.gpi, it# is created from the corresponding .gpi file with a special# comment ##GRAY in its header, which causes coloring to be# turned off.# * Fixed a bug in the handling of .tex.sh files. For some reason I had# neglected to define file stems for scripted output.# * Removed a trailing ; from the %.graphics dependencies# * Added dvips embedding (I think it works, anyway)# Chris Monson (2006-03-29):# * Bumped version to 2.0a3# * Fixed error in make 3.79 with MAKEFILE_LIST usage# * Added the presumed filename to the _version output# * Added a vim macro for converting sed scripts to make commands# * Added gpi dependency support (plotting external files and loading gpi)# * Allow .gpi files to be ignored if called .include.gpi or .nobuild.gpi# * Fixed sed invocations where \+ was used. BSD sed uses \{1,\}.# Chris Monson (2006-03-28):# * Bumped version to 2.0a2# * Added SHELL_DEBUG and VERBOSE options# * Changed the default shell back to /bin/sh (unset, in other words)# * Moved .PHONY declarations closer to their targets# * Moved help text into its own define block to obtain better formatting# * Removed need for double-entry when adding a new program invocation# * Moved .SECONDARY declaration closer to its relevant occurrence# * Commented things more heavily# * Added help text about setting terminal and output in gnuplot# * Created more fine-grained clean targets# * Added a %.graphics target that generates all of %'s graphics# * Killed backward-compatible graphics generation (e.g., eps.gpi=gpi.eps)# * For now, we're just GPL 2, not 3. Maybe it will change later# * Made the version and svninfo into variables# Chris Monson (2006-03-27):# * Bumped version to 2.0a1# * Huge, sweeping changes -- automatic dependencies## IMPORTANT!## When adding to the following list, do not introduce any blank lines. The# list is extracted for documentation using sed and is terminated by a blank# line.## EXTERNAL PROGRAMS:# = ESSENTIAL PROGRAMS =# == Basic Shell Utilities ==CAT ?= catCP ?= cp -fDIFF ?= diffECHO ?= echoEGREP ?= egrepENV ?= envEXPR ?= exprMV ?= mv -fSED ?= sedSORT ?= sortTOUCH ?= touchUNIQ ?= uniqWHICH ?= whichXARGS ?= xargsSLEEP ?= sleep# == LaTeX (tetex-provided) ==BIBTEX ?= bibtexDVIPS ?= dvipsLATEX ?= latexPDFLATEX ?= pdflatexXELATEX ?= xelatexEPSTOPDF ?= epstopdfMAKEINDEX ?= makeindexXINDY ?= xindyKPSEWHICH ?= kpsewhichGS ?= gs# = OPTIONAL PROGRAMS =# == For MikTex under Cygwin, to get path names rightCYGPATH ?= cygpath# == Makefile Color Output ==TPUT ?= tput# == TeX Generation ==PERL ?= perlPYTHON ?= pythonRST2LATEX ?= rst2latex.pyLHS2TEX ?= lhs2tex# == EPS Generation ==CONVERT ?= convert # ImageMagickDOT ?= dot # GraphVizDOT2TEX ?= dot2tex # dot2tex - add options (not -o) as neededMPOST ?= mpost # MetaPostFIG2DEV ?= fig2dev # XFigGNUPLOT ?= gnuplot # GNUplotINKSCAPE ?= inkscape # Inkscape (svg support)XMGRACE ?= xmgrace # XMgracePNGTOPNM ?= pngtopnm # From NetPBM - step 1 for png -> epsPPMTOPGM ?= ppmtopgm # From NetPBM - (gray) step 2 for png -> epsPNMTOPS ?= pnmtops # From NetPBM - step 3 for png -> epsGUNZIP ?= gunzip # GZipped EPS# == Beamer Enlarged Output ==PSNUP ?= psnup# == Viewing Stuff ==VIEW_POSTSCRIPT ?= gvVIEW_PDF ?= xpdfVIEW_GRAPHICS ?= display# Xindy glossariesXINDYLANG ?= englishXINDYENC ?= utf8# If cygpath is present, then we create a path-norm function that uses it,# otherwise the function is just a no-op. Issue 112 has details.USE_CYGPATH := $(if $(shell $(WHICH) $(CYGPATH) 2>/dev/null),yes,)define path-norm$(if $(USE_CYGPATH),$(shell $(CYGPATH) -u "$1"),$1)endef# Command options for embedding fonts and postscript->pdf conversionPS_EMBED_OPTIONS ?= -dPDFSETTINGS=/prepress -dEmbedAllFonts=true -dSubsetFonts=true -dMaxSubsetPct=100PS_COMPATIBILITY ?= 1.4# If set to something, will cause temporary files to not be deleted immediatelyKEEP_TEMP ?=# Defaults for GPIDEFAULT_GPI_EPS_FONTSIZE ?= 22DEFAULT_GPI_PDF_FONTSIZE ?= 12# Style file for ReSTRST_STYLE_FILE ?= $(wildcard _rststyle_._include_.tex)# This ensures that even when echo is a shell builtin, we still use the binary# (the builtin doesn't always understand -n)FIXED_ECHO := $(if $(findstring -n,$(shell $(ECHO) -n)),$(shell which echo),$(ECHO))ECHO := $(if $(FIXED_ECHO),$(FIXED_ECHO),$(ECHO))define determine-gnuplot-output-extension$(if $(shell $(WHICH) $(GNUPLOT) 2>/dev/null),$(if $(findstring unknown or ambiguous, $(shell $(GNUPLOT) -e "set terminal pdf" 2>&1)),eps, pdf),none)endefGNUPLOT_OUTPUT_EXTENSION ?= $(strip $(call determine-gnuplot-output-extension))# Internal code should use this because of :=. This means that the potentially# expensive script invocation used to determine whether pdf is available will# only be run once.GPI_OUTPUT_EXTENSION := $(strip $(GNUPLOT_OUTPUT_EXTENSION))# Note, if the terminal *does* understand fsize, then we expect this call to# create a specific error here: "fsize: expecting font size". Otherwise, we# assume that fsize is not understood.GPI_FSIZE_SYNTAX := $(strip \$(if \$(filter pdf,$(GPI_OUTPUT_EXTENSION)),\$(if \$(findstring fsize: expecting font size,$(shell $(GNUPLOT) -e "set terminal pdf fsize" 2>&1)),\fsize FONTSIZE,\font ",FONTSIZE"),\FONTSIZE))# Directory into which we place "binaries" if it exists.# Note that this can be changed on the commandline or in Makefile.ini:## Command line:# make BINARY_TARGET_DIR=$HOME/pdfs myfile.pdf## Also, you can specify a relative directory (relative to the Makefile):# make BINARY_TARGET_DIR=pdfs myfile.pdf## Or, you can use Makefile.ini:## BINARY_TARGET_DIR := $(HOME)/bin_out#BINARY_TARGET_DIR ?= _out_RESTARTS := $(if $(MAKE_RESTARTS),$(MAKE_RESTARTS),0)# SH NOTES## On some systems, /bin/sh, which is the default shell, is not linked to# /bin/bash. While bash is supposed to be sh-compatible when invoked as sh, it# just isn't. This section details some of the things you have to stay away# from to remain sh-compatible.## * File pattern expansion does not work for {}# * [ "$x" = "$y" ] has to be [ x"$x" x"$y" ]# * &> for stderr redirection doesn't work, use 2>&1 instead## BSD SED NOTES## BSD SED is not very nice compared to GNU sed, but it is the most# commonly-invoked sed on Macs (being based on BSD), so we have to cater to# it or require people to install GNU sed. It seems like the GNU# requirement isn't too bad since this makefile is really a GNU makefile,# but apparently GNU sed is much less common than GNU make in general, so# I'm supporting it here.## Sad experience has taught me the following about BSD sed:## * \+ is not understood to mean \{1,\}# * \| is meaningless (does not branch)# * \n cannot be used as a substitution character# * ? does not mean \{0,1\}, but is literal# * a\ works, but only reliably for a single line if subsequent lines# have forward slashes in them (as is the case in postscript)## For more info (on the Mac) you can consult## man -M /usr/share/man re_format## And look for the word "Obsolete" near the bottom.## EXTERNAL PROGRAM DOCUMENTATION SCRIPT## $(call output-all-programs,[<output file>])define output-all-programs[ -f '$(this_file)' ] && \$(SED) \-e '/^[[:space:]]*#[[:space:]]*EXTERNAL PROGRAMS:/,/^$$/!d' \-e '/EXTERNAL PROGRAMS/d' \-e '/^$$/d' \-e '/^[[:space:]]*#/i\ '\-e 's/^[[:space:]]*#[[:space:]][^=]*//' \$(this_file) $(if $1,> '$1',) || \$(ECHO) "Cannot determine the name of this makefile."endef# If they misspell gray, it should still work.GRAY ?= $(call get-default,$(GREY),)## Utility Functions and Definitions### Transcript# For debug/testing purposes: writes a message to# filename.transcript.make for each command that was run, including# some human-readable justification for why it had to be run.# For example: "Running latex (log-file indicated that this is necessary)"# Set WRITE_TRANSCRIPT to something to activateWRITE_TRANSCRIPT ?=# Set reason for the next run call# $(call set-run-reason,message)set-run-reason = export run_reason="$1"# Log command to the transcript file# $(call set-run-reason,command,job_name)define transcript$(if $(WRITE_TRANSCRIPT), \$(ECHO) "Running $1 ($$run_reason)" >> $2.transcript.make; \export run_reason="", \$(sh_true))endef# Don't call this directly - it is here to avoid calling wildcard more than# once in remove-files.remove-files-helper = $(if $1,$(RM) $1,$(sh_true))# $(call remove-files,file1 file2)remove-files = $(call remove-files-helper,$(wildcard $1))# Removes all cleanable files in the given list# $(call clean-files,file1 file2 file3 ...)# Works exactly like remove-files, but filters out files in $(neverclean)clean-files = \$(call remove-files-helper,$(call cleanable-files,$(wildcard $1)))# Outputs all generated files to STDOUT, along with some others that are# created by these (e.g., .idx files end up producing .ilg and .ind files).# Discovered by reading *.fls OUTPUT lines and producing corresponding .ind# filenames as needed.## $(call get-generated-names,<source recorder file (*.fls)>)define get-generated-names[ -f '$1' ] && \$(SED) \-e '/^OUTPUT /{' \-e ' s///' \-e ' p' \-e ' s/\.idx/\.ind/p' \-e ' s/\.ind/\.ilg/p' \-e '}' \-e 'd' \'$1' \| $(SORT) | $(UNIQ)endef# This removes files without checking whether they are there or not. This# sometimes has to be used when the file is created by a series of shell# commands, but there ends up being a race condition: make doesn't know about# the file generation as quickly as the system does, so $(wildcard ...) doesn't# work right. Blech.# $(call remove-temporary-files,filenames)remove-temporary-files = $(if $(KEEP_TEMP),:,$(if $1,$(RM) $1,:))# Create an identifier from a file name# $(call cleanse-filename,filename)cleanse-filename = $(subst .,_,$(subst /,__,$1))# Escape dots# $(call escape-fname-regex,str)escape-fname-regex = $(subst /,\\/,$(subst .,\\.,$1))# Test that a file exists# $(call test-exists,file)test-exists = [ -e '$1' ]# $(call test-not-exists,file)test-not-exists = [ ! -e '$1' ]# $(call move-files,source,destination)move-if-exists = $(call test-exists,$1) && $(MV) '$1' '$2'# Copy file1 to file2 only if file2 doesn't exist or they are different# $(call copy-if-different,sfile,dfile)copy-if-different = $(call test-different,$1,$2) && $(CP) '$1' '$2'copy-if-exists = $(call test-exists,$1) && $(CP) '$1' '$2'move-if-different = $(call test-different,$1,$2) && $(MV) '$1' '$2'replace-if-different-and-remove = \$(call test-different,$1,$2) \&& $(MV) '$1' '$2' \|| $(call remove-files,'$1')# Note that $(DIFF) returns success when the files are the SAME....# $(call test-different,sfile,dfile)test-different = ! $(DIFF) -q '$1' '$2' >/dev/null 2>&1test-exists-and-different = \$(call test-exists,$2) && $(call test-different,$1,$2)# Return value 1, or value 2 if value 1 is empty# $(call get-default,<possibly empty arg>,<default value if empty>)get-default = $(if $1,$1,$2)# Copy a file and log what's going on# $(call copy-with-logging,<source>,<target>)define copy-with-loggingif [ -d '$2/' ]; then \if $(CP) '$1' '$2/'; then \$(ECHO) "$(C_INFO)Copied '$1' to '$2/'$(C_RESET)"; \else \$(ECHO) "$(C_ERROR)Failed to copy '$1' to '$2/'$(C_RESET)"; \fi; \fiendef# Gives a reassuring message about the failure to find include files# $(call include-message,<list of include files>)define include-message$(strip \$(if $(filter-out $(wildcard $1),$1),\$(shell $(ECHO) \"$(C_INFO)NOTE: You may ignore warnings about the"\"following files:" >&2;\$(ECHO) >&2; \$(foreach s,$(filter-out $(wildcard $1),$1),$(ECHO) ' $s' >&2;)\$(ECHO) "$(C_RESET)" >&2)))endef# Characters that are hard to specify in certain placesspace := $(empty) $(empty)colon := \:comma := ,# Useful shell definitionssh_true := :sh_false := ! :# Clear out the standard interfering make suffixes.SUFFIXES:# Turn off forceful rm (RM is usually mapped to rm -f)ifdef SAFE_RMRM := rmendif# Turn command echoing back on with VERBOSE=1ifndef VERBOSEQUIET := @endif# Turn on shell debugging with SHELL_DEBUG=1# (EVERYTHING is echoed, even $(shell ...) invocations)ifdef SHELL_DEBUGSHELL += -xendif# Get the name of this makefile (always right in 3.80, often right in 3.79)# This is only really used for documentation, so it isn't too serious.ifdef MAKEFILE_LISTthis_file := $(firstword $(MAKEFILE_LIST))elsethis_file := $(wildcard GNUmakefile makefile Makefile)endif# Terminal color definitionsREAL_TPUT := $(if $(NO_COLOR),,$(shell $(WHICH) $(TPUT)))# $(call get-term-code,codeinfo)# e.g.,# $(call get-term-code,setaf 0)get-term-code = $(if $(REAL_TPUT),$(shell $(REAL_TPUT) $1),)black := $(call get-term-code,setaf 0)red := $(call get-term-code,setaf 1)green := $(call get-term-code,setaf 2)yellow := $(call get-term-code,setaf 3)blue := $(call get-term-code,setaf 4)magenta := $(call get-term-code,setaf 5)cyan := $(call get-term-code,setaf 6)white := $(call get-term-code,setaf 7)bold := $(call get-term-code,bold)uline := $(call get-term-code,smul)reset := $(call get-term-code,sgr0)## User-settable definitions#LATEX_COLOR_WARNING ?= magentaLATEX_COLOR_ERROR ?= redLATEX_COLOR_INFO ?= greenLATEX_COLOR_UNDERFULL ?= magentaLATEX_COLOR_OVERFULL ?= red boldLATEX_COLOR_PAGES ?= boldLATEX_COLOR_BUILD ?= cyanLATEX_COLOR_GRAPHIC ?= yellowLATEX_COLOR_DEP ?= greenLATEX_COLOR_SUCCESS ?= green boldLATEX_COLOR_FAILURE ?= red bold# Gets the real color from a simple textual definition like those above# $(call get-color,ALL_CAPS_COLOR_NAME)# e.g., $(call get-color,WARNING)get-color = $(subst $(space),,$(foreach c,$(LATEX_COLOR_$1),$($c)))## STANDARD COLORS#C_WARNING := $(call get-color,WARNING)C_ERROR := $(call get-color,ERROR)C_INFO := $(call get-color,INFO)C_UNDERFULL := $(call get-color,UNDERFULL)C_OVERFULL := $(call get-color,OVERFULL)C_PAGES := $(call get-color,PAGES)C_BUILD := $(call get-color,BUILD)C_GRAPHIC := $(call get-color,GRAPHIC)C_DEP := $(call get-color,DEP)C_SUCCESS := $(call get-color,SUCCESS)C_FAILURE := $(call get-color,FAILURE)C_RESET := $(reset)## PRE-BUILD TESTS## Check that clean targets are not combined with other targets (weird things# happen, and it's not easy to fix them)hascleangoals := $(if $(sort $(filter clean clean-%,$(MAKECMDGOALS))),1)hasbuildgoals := $(if $(sort $(filter-out clean clean-%,$(MAKECMDGOALS))),1)ifneq "$(hasbuildgoals)" ""ifneq "$(hascleangoals)" ""$(error $(C_ERROR)Clean and build targets specified together$(C_RESET)))endifendif## VARIABLE DECLARATIONS## Names of sed scripts that morph gnuplot files -- only the first found is usedGNUPLOT_SED := global-gpi.sed gnuplot.sedGNUPLOT_GLOBAL := global._include_.gpi gnuplot.globalifeq "$(strip $(BUILD_STRATEGY))" "latex"default_graphic_extension ?= epslatex_build_program ?= $(LATEX)build_target_extension ?= dvihyperref_driver_pattern ?= hdvipshyperref_driver_error ?= Using dvips: specify ps2pdf in the hyperref options.endififeq "$(strip $(BUILD_STRATEGY))" "pdflatex"default_graphic_extension ?= pdflatex_build_program ?= $(PDFLATEX)build_target_extension ?= pdfhyperref_driver_pattern ?= hpdf.*hyperref_driver_error ?= Using pdflatex: specify pdftex in the hyperref options (or leave it blank).endififeq "$(strip $(BUILD_STRATEGY))" "xelatex"default_graphic_extension ?= pdflatex_build_program ?= $(XELATEX)build_target_extension ?= pdfhyperref_driver_pattern ?= hdvipdf.*hyperref_driver_error ?= Using pdflatex: specify pdftex in the hyperref options (or leave it blank).endif# Files of interestall_files.tex ?= $(wildcard *.tex)all_files.tex.sh ?= $(wildcard *.tex.sh)all_files.tex.pl ?= $(wildcard *.tex.pl)all_files.tex.py ?= $(wildcard *.tex.py)all_files.rst ?= $(wildcard *.rst)all_files.lhs ?= $(wildcard *.lhs)all_files.mp ?= $(wildcard *.mp)all_files.fig ?= $(wildcard *.fig)all_files.gpi ?= $(wildcard *.gpi)all_files.dot ?= $(wildcard *.dot)all_files.xvg ?= $(wildcard *.xvg)all_files.svg ?= $(wildcard *.svg)all_files.png ?= $(wildcard *.png)all_files.jpg ?= $(wildcard *.jpg)all_files.jpeg ?= $(wildcard *.jpeg)all_files.eps.gz ?= $(wildcard *.eps.gz)all_files.eps ?= $(wildcard *.eps)# Utility function for obtaining all files not specified in $(neverclean)# $(call cleanable-files,file1 file2 file3 ...)# Returns the list of files that is not in $(wildcard $(neverclean))cleanable-files = $(filter-out $(wildcard $(neverclean)), $1)# Utility function for getting all .$1 files that are to be ignored# * files listed in $(includes.$1)# * files not listed in $(onlysources.$1) if it is definedignore_files = \$(includes.$1) \$(if $(onlysources.$1),$(filter-out $(onlysources.$1), $(all_files.$1)))# Patterns to never be allowed as source targetsignore_patterns := %._include_# Patterns allowed as source targets but not included in 'all' buildsnodefault_patterns := %._nobuild_ $(ignore_patterns)# Utility function for getting targets suitable building# $(call filter-buildable,suffix)filter-buildable = \$(filter-out $(call ignore_files,$1) \$(addsuffix .$1,$(ignore_patterns)),$(all_files.$1))# Utility function for getting targets suitable for 'all' builds# $(call filter-default,suffix)filter-default = \$(filter-out $(call ignore_files,$1) \$(addsuffix .$1,$(nodefault_patterns)),$(all_files.$1))# Top level sources that can be built even when they are not by defaultfiles.tex := $(call filter-buildable,tex)files.tex.sh := $(call filter-buildable,tex.sh)files.tex.pl := $(call filter-buildable,tex.pl)files.tex.py := $(call filter-buildable,tex.py)files.rst := $(call filter-buildable,rst)files.lhs := $(call filter-buildable,lhs)files.gpi := $(call filter-buildable,gpi)files.dot := $(call filter-buildable,dot)files.mp := $(call filter-buildable,mp)files.fig := $(call filter-buildable,fig)files.xvg := $(call filter-buildable,xvg)files.svg := $(call filter-buildable,svg)files.png := $(call filter-buildable,png)files.jpg := $(call filter-buildable,jpg)files.jpeg := $(call filter-buildable,jpeg)files.eps.gz := $(call filter-buildable,eps.gz)files.eps := $(call filter-buildable,eps)# Make all pstex targets secondary. The pstex_t target requires the pstex# target, and nothing else really depends on it, so it often gets deleted.# This avoids that by allowing *all* fig files to be pstex targets, which is# perfectly valid and causes no problems even if they're going to become eps# files in the end..SECONDARY: $(patsubst %.fig,%.pstex,$(files.fig))# Make all .tex targets secondary that result .rst and .lhs:.SECONDARY: $(patsubst %.rst,%.tex,$(files.rst)).SECONDARY: $(patsubst %.lhs,%.tex,$(files.lhs))# Top level sources that are built by default targetsdefault_files.tex := $(call filter-default,tex)default_files.tex.sh := $(call filter-default,tex.sh)default_files.tex.pl := $(call filter-default,tex.pl)default_files.tex.py := $(call filter-default,tex.py)default_files.rst := $(call filter-default,rst)default_files.lhs := $(call filter-default,lhs)default_files.gpi := $(call filter-default,gpi)default_files.dot := $(call filter-default,dot)default_files.mp := $(call filter-default,mp)default_files.fig := $(call filter-default,fig)default_files.xvg := $(call filter-default,xvg)default_files.svg := $(call filter-default,svg)default_files.png := $(call filter-default,png)default_files.jpg := $(call filter-default,jpg)default_files.jpeg := $(call filter-default,jpeg)default_files.eps.gz := $(call filter-default,eps.gz)default_files.eps := $(call filter-default,eps)# Utility function for creating larger lists of files# $(call concat-files,suffixes,[prefix])concat-files = $(foreach s,$1,$($(if $2,$2_,)files.$s))# Useful file groupingsall_files_source := $(call concat-files,tex,all)all_files_source_gen := $(call concat-files,rst rhs,all)all_files_scripts := $(call concat-files,tex.sh tex.pl tex.py,all).PHONY: $(all_files_scripts)default_files_source := $(call concat-files,tex,default)default_files_source_gen := $(call concat-files,rhs lhs,default)default_files_scripts := $(call concat-files,tex.sh tex.pl tex.py,default)files_source := $(call concat-files,tex)files_source_gen := $(call concat-files,rst lhs)files_scripts := $(call concat-files,tex.sh tex.pl tex.py)# Utility function for obtaining stems# $(call get-stems,suffix,[prefix])get-stems = $(sort $($(if $2,$2_,)files.$1:%.$1=%))# List of all stems (including ._include_ and ._nobuild_ file stems)all_stems.tex := $(call get-stems,tex,all)all_stems.tex.sh := $(call get-stems,tex.sh,all)all_stems.tex.pl := $(call get-stems,tex.pl,all)all_stems.tex.py := $(call get-stems,tex.py,all)all_stems.rst := $(call get-stems,rst,all)all_stems.lhs := $(call get-stems,lhs,all)all_stems.mp := $(call get-stems,mp,all)all_stems.fig := $(call get-stems,fig,all)all_stems.gpi := $(call get-stems,gpi,all)all_stems.dot := $(call get-stems,dot,all)all_stems.xvg := $(call get-stems,xvg,all)all_stems.svg := $(call get-stems,svg,all)all_stems.png := $(call get-stems,png,all)all_stems.jpg := $(call get-stems,jpg,all)all_stems.jpeg := $(call get-stems,jpeg,all)all_stems.eps.gz := $(call get-stems,eps.gz,all)all_stems.eps := $(call get-stems,eps,all)# List of all default stems (all default PDF targets):default_stems.tex := $(call get-stems,tex,default)default_stems.tex.sh := $(call get-stems,tex.sh,default)default_stems.tex.pl := $(call get-stems,tex.pl,default)default_stems.tex.py := $(call get-stems,tex.py,default)default_stems.rst := $(call get-stems,rst,default)default_stems.lhs := $(call get-stems,lhs,default)default_stems.mp := $(call get-stems,mp,default)default_stems.fig := $(call get-stems,fig,default)default_stems.gpi := $(call get-stems,gpi,default)default_stems.dot := $(call get-stems,dot,default)default_stems.xvg := $(call get-stems,xvg,default)default_stems.svg := $(call get-stems,svg,default)default_stems.png := $(call get-stems,png,default)default_stems.jpg := $(call get-stems,jpg,default)default_stems.jpeg := $(call get-stems,jpeg,default)default_stems.eps.gz := $(call get-stems,eps.gz,default)default_stems.eps := $(call get-stems,eps,default)# List of all stems (all possible bare PDF targets created here):stems.tex := $(call get-stems,tex)stems.tex.sh := $(call get-stems,tex.sh)stems.tex.pl := $(call get-stems,tex.pl)stems.tex.py := $(call get-stems,tex.py)stems.rst := $(call get-stems,rst)stems.lhs := $(call get-stems,lhs)stems.mp := $(call get-stems,mp)stems.fig := $(call get-stems,fig)stems.gpi := $(call get-stems,gpi)stems.dot := $(call get-stems,dot)stems.xvg := $(call get-stems,xvg)stems.svg := $(call get-stems,svg)stems.png := $(call get-stems,png)stems.jpg := $(call get-stems,jpg)stems.jpeg := $(call get-stems,jpeg)stems.eps.gz := $(call get-stems,eps.gz)stems.eps := $(call get-stems,eps)# Utility function for creating larger lists of stems# $(call concat-stems,suffixes,[prefix])concat-stems = $(sort $(foreach s,$1,$($(if $2,$2_,)stems.$s)))# The most likely to be source but not finished product go firstgraphic_source_extensions := mp \fig \gpi \xvg \svg \dot \eps.gzifeq "$(strip $(BUILD_STRATEGY))" "latex"graphic_source_extensions += png jpg jpeg epsgraphic_target_extensions := eps psendififeq "$(strip $(BUILD_STRATEGY))" "pdflatex"graphic_source_extensions += epsgraphic_target_extensions := pdf png jpg jpeg mps tifendififeq "$(strip $(BUILD_STRATEGY))" "xelatex"graphic_source_extensions += epsgraphic_target_extensions := pdf png jpg jpeg mps tifendifall_stems_source := $(call concat-stems,tex,all)all_stems_source_gen := $(call concat-stems,rst lhs,all)all_stems_script := $(call concat-stems,tex.sh tex.pl tex.py,all)all_stems_graphic := $(call concat-stems,$(graphic_source_extensions),all)all_stems_ss := $(sort $(all_stems_source) $(all_stems_source_gen) $(all_stems_script))all_stems_sg := $(sort $(all_stems_script) $(all_stems_source_gen))all_stems_ssg := $(sort $(all_stems_ss))default_stems_source := $(call concat-stems,tex,default)default_stems_source_gen := $(call concat-stems,rst lhs,default)default_stems_script := $(call concat-stems,tex.sh tex.pl tex.py,default)default_stems_ss := $(sort $(default_stems_source) $(default_stems_source_gen) $(default_stems_script))default_stems_sg := $(sort $(default_stems_script) $(default_stems_source_gen))default_stems_ssg := $(sort $(default_stems_ss))stems_source := $(call concat-stems,tex)stems_source_gen := $(call concat-stems,rst lhs)stems_script := $(call concat-stems,tex.sh tex.pl tex.py)stems_graphic := $(call concat-stems,$(graphic_source_extensions))stems_gg := $(sort $(stems_graphic))stems_ss := $(sort $(stems_source) $(stems_source_gen) $(stems_script))stems_sg := $(sort $(stems_script) $(stems_source_gen))stems_ssg := $(sort $(stems_ss))# Calculate names that can generate the need for an include file. We can't# really do this with patterns because it's too easy to screw up, so we create# an exhaustive list.allowed_source_suffixes := \pdf \ps \dvi \ind \nls \bbl \aux \aux.make \d \auxbbl.make \_graphics \_showallowed_source_patterns := $(addprefix %.,$(allowed_source_suffixes))allowed_graphic_suffixes := \pdf \eps \gpihead.make \gpi.dallowed_graphic_patterns := $(addprefix %.,$(allowed_graphic_suffixes))# All targets allowed to build documentsallowed_source_targets := \$(foreach suff,$(allowed_source_suffixes),\$(addsuffix .$(suff),$(stems_ssg)))# All targets allowed to build graphicsallowed_graphic_targets := \$(foreach suff,$(allowed_graphic_suffixes),\$(addsuffix .$(suff),$(stems_gg)))# All targets that build multiple documents (like 'all')allowed_batch_source_targets := \all \all-pdf \all-ps \all-dvi \all-bbl \all-ind \all-gls \all-nls \show# All targets that build multiple graphics (independent of document)allowed_batch_graphic_targets := \all-graphics \all-pstex \all-dot2tex \show-graphics# Now we figure out which stuff is available as a make target for THIS RUN.real_goals := $(call get-default,$(filter-out _includes,$(MAKECMDGOALS)),\all)specified_source_targets := $(strip \$(filter $(allowed_source_targets) $(stems_ssg),$(real_goals)) \)specified_batch_source_targets := $(strip \$(filter $(allowed_batch_source_targets),$(real_goals)) \)specified_graphic_targets := $(strip \$(filter $(allowed_graphic_targets),$(real_goals)) \)specified_batch_graphic_targets := $(strip \$(filter $(allowed_batch_graphic_targets),$(real_goals)) \)specified_gpi_targets := $(patsubst %.gpi,%.$(default_graphic_extension),\$(filter $(patsubst %.$(default_graphic_extension),%.gpi,$(specified_graphic_targets)),\$(all_files.gpi)) \)# Determine which .d files need including from the information gained above.# This is done by first checking whether a batch target exists. If it does,# then all *default* stems are used to create possible includes (nobuild need# not apply for batch status). If no batch targets exist, then the individual# targets are considered and appropriate includes are taken from them.source_stems_to_include := \$(sort\$(if $(specified_batch_source_targets),\$(default_stems_ss),\$(foreach t,$(specified_source_targets),\$(foreach p,$(allowed_source_patterns),\$(patsubst $p,%,$(filter $p $(stems_ssg),$t)) \)) \))# Determine which .gpi.d files are needed using the above information. We# first check whether a batch target is specified, then check individual# graphics that may have been specified.graphic_stems_to_include := \$(sort\$(if $(specified_batch_graphic_targets),\$(default_stems.gpi),\$(foreach t,$(specified_gpi_targets),\$(foreach p,$(allowed_graphic_patterns),\$(patsubst $p,%,$(filter $p,$t)) \)) \))# All dependencies for the 'all' targetsall_pdf_targets := $(addsuffix .pdf,$(stems_ssg))all_ps_targets := $(addsuffix .ps,$(stems_ssg))all_dvi_targets := $(addsuffix .dvi,$(stems_ssg))all_tex_targets := $(addsuffix .tex,$(stems_sg))all_d_targets := $(addsuffix .d,$(stems_ssg))all_graphics_targets := $(addsuffix .$(default_graphic_extension),$(stems_gg))all_pstex_targets := $(addsuffix .pstex_t,$(stems.fig))all_dot2tex_targets := $(addsuffix .dot_t,$(stems.dot))all_known_graphics := $(sort $(all_graphics_targets) $(wildcard *.$(default_graphic_extension)))default_pdf_targets := $(addsuffix .pdf,$(default_stems_ss))ifeq "$(strip $(BUILD_STRATEGY))" "latex"default_ps_targets := $(addsuffix .ps,$(default_stems_ss))default_dvi_targets := $(addsuffix .dvi,$(default_stems_ss))pre_pdf_extensions := dvi psendif# Extensions generated by LaTeX invocation that can be removed when completerm_ext := \log *.log aux $(pre_pdf_extensions) ps pdf blg bbl out nav snm toc lof lot lol pfg \fls vrb idx ind ilg glg glo gls lox nls nlo nlg brf mtc* mlf* mlt* maf brf ist fmtbackup_patterns := *~ *.bak *.backup body.tmp head.tmpgraph_stem := _graph# All LaTeX-generated files that can be safely removedrm_tex := \$(foreach e,$(rm_ext),$(addsuffix .$e,$(all_stems_source))) \$(foreach e,$(rm_ext) tex,$(addsuffix .$e,$(all_stems_sg))) \$(addsuffix .log,$(all_ps_targets) $(all_pdf_targets)) \$(addsuffix .*.log,$(stems_graphic))# These are the files that will affect .gpi transformation for all .gpi files.## Use only the first one found. Backward compatible values are at the end.# Note that we use foreach, even though wildcard also returns a list, to ensure# that the order in the uppercase variables is preserved. Directory listings# provide no such guarantee, so we avoid relying on them.gpi_sed := $(strip \$(firstword $(foreach f,$(GNUPLOT_SED),$(wildcard $f))))gpi_global := $(strip \$(firstword $(foreach f,$(GNUPLOT_GLOBAL),$(wildcard $f))))## Functions used in generating output## Outputs all source dependencies to stdout. The first argument is the file to# be parsed, the second is a list of files that will show up as dependencies in# the new .d file created here.## $(call get-inputs,<parsed file>,<target files>)define get-inputs$(SED) \-e '/^INPUT/!d' \-e 's!^INPUT \(\./\)\{0,1\}!!' \-e 's/[[:space:]]/\\ /g' \-e 's/\(.*\)\.aux$$/\1.tex/' \-e '/\.tex$$/b addtargets' \-e '/\.cls$$/b addtargets' \-e '/\.sty$$/b addtargets' \-e '/\.pstex_t$$/b addtargets' \-e '/\.dot_t$$/b addtargets' \-e 'd' \-e ':addtargets' \-e 's!.*!$2: $$(call path-norm,&)!' \'$1' | $(SORT) | $(UNIQ)endef# $(call get-format,<tex file>,<target files>)define get-format$(SED) \-e '1!d' \-e '/^%&\([[:alnum:]]\{1,\}\)\( .*\)*$$/{' \-e ' s!!\1!' \-e ' h' \-e ' s/.*/# MISSING format "&.fmt" (comment forces rebuild of target file)/' \-e ' p' \-e ' g' \-e ' s!.*!$2: $$(call path-norm,&.fmt)!' \-e ' p' \-e '}' \-e 'd' \'$1'endef# $(call get-missing-inputs,<log file>,<target files>)define get-missing-inputs$(SED) \-e '$${' \-e ' /^$$/!{' \-e ' H' \-e ' s/.*//' \-e ' }' \-e '}' \-e '/^$$/!{' \-e ' H' \-e ' d' \-e '}' \-e '/^$$/{' \-e ' x' \-e ' s/^\(\n\)\(.*\)/\2\1/' \-e '}' \-e '/^::P\(P\{1,\}\)::/{' \-e ' s//::\1::/' \-e ' G' \-e ' h' \-e ' d' \-e '}' \-e '/^::P::/{' \-e ' s//::0::/' \-e ' G' \-e '}' \-e 'b start' \-e ':needonemore' \-e 's/^/::P::/' \-e 'G' \-e 'h' \-e 'd' \-e ':needtwomore' \-e 's/^/::PP::/' \-e 'G' \-e 'h' \-e 'd' \-e ':needthreemore' \-e 's/^/::PPP::/' \-e 'G' \-e 'h' \-e 'd' \-e ':start' \-e '/^! LaTeX Error: File `/{' \-e ' b needtwomore' \-e '}' \-e '/^::0::\(.*\)/{' \-e ' s//\1/' \-e ' /Default extension: /!d' \-e ' s/.*File `\([^'"'"']*\)'"'"' not found.*/\1/' \-e ' s/[[:cntrl:]]//' \-e ' /\.tex/!s/$$/.tex/' \-e ' s/[[:space:]]/\\ /g' \-e ' h' \-e ' s/.*/# MISSING input "&" - (presence of comment affects build)/' \-e ' p' \-e ' s/.*//' \-e ' x' \-e ' s!^.*!$2: $$(call path-norm,&)!' \-e ' p' \-e '}' \-e 'd' \'$1' | $(SORT) | $(UNIQ)endef# Get source file for specified graphics stem.## $(call graphics-source,<stem>)define graphics-source$(strip $(firstword \$(wildcard \$(addprefix $1.,\$(graphic_source_extensions))) \$1 \))endef# Get the target file for the specified graphics file/stem## $(call graphics-target,<stem>)define graphics-target$(strip $(if $(filter $(addprefix %.,$(graphic_target_extensions)),$1), $1,$(firstword $(patsubst $(addprefix %.,$(graphic_source_extensions) $(graphic_target_extensions)), %, $1).$(default_graphic_extension) $1.$(default_graphic_extension))))endef# Outputs all of the graphical dependencies to stdout. The first argument is# the stem of the source file being built, the second is a list of suffixes# that will show up as dependencies in the generated .d file.## Note that we try to escape spaces in filenames where possible. We have to do# it with three backslashes so that as the name percolates through the makefile# it eventually ends up with the proper escaping when the build rule is found.# Ugly, but it appears to work. Note that graphicx doesn't allow filenames# with spaces, so this could in many ways be moot unless you're using something# like grffile.## For pdflatex, we really need the missing file to be specified without an# extension, otherwise compilation barfs on the first missing file. Truly# annoying, but there you have it.## It turns out that the graphics errors, although they have lines with empty# space, are only made of two paragraphs. So, we just use some sed magic to# get everything into paragraphs, detect when it's a paragraph that interests# us, and double it up. Then we get the filename only if we're missing# extensions (a sign that it's graphicx complaining).## $(call get-graphics,<target file stem>)define get-graphics$(SED) \-e '/^File: \(.*\) Graphic file (type [^)]*)/{' \-e ' s//\1/' \-e ' s/\.e\{0,1\}ps$$//' \-e ' b addtargets' \-e '}' \-e '$${' \-e ' /^$$/!{' \-e ' H' \-e ' s/.*//' \-e ' }' \-e '}' \-e '/^$$/!{' \-e ' H' \-e ' d' \-e '}' \-e '/^$$/{' \-e ' x' \-e ' s/^\(\n\)\(.*\)/\2\1/' \-e '}' \-e '/^::P\(P\{1,\}\)::/{' \-e ' s//::\1::/' \-e ' G' \-e ' h' \-e ' d' \-e '}' \-e '/^::P::/{' \-e ' s//::0::/' \-e ' G' \-e '}' \-e 'b start' \-e ':needonemore' \-e 's/^/::P::/' \-e 'G' \-e 'h' \-e 'd' \-e ':needtwomore' \-e 's/^/::PP::/' \-e 'G' \-e 'h' \-e 'd' \-e ':needthreemore' \-e 's/^/::PPP::/' \-e 'G' \-e 'h' \-e 'd' \-e ':start' \-e '/^[^[:cntrl:]:]*:[[:digit:]]\{1,\}:[[:space:][:cntrl:]]*LaTeX[[:space:][:cntrl:]]*Error:[[:space:][:cntrl:]]*File `/{' \-e ' s/\n//g' \-e ' b needonemore' \-e '}' \-e '/^::0::.*: LaTeX Error: File `/{' \-e ' /\n\n$$/{' \-e ' s/^::0:://' \-e ' b needonemore' \-e ' }' \-e ' s/\n\{1,\}/ /g' \-e ' s/[[:space:]]\{1,\}/ /g' \-e ' s/^.*File `//' \-e ' /extensions: /{' \-e ' s/'"'"' not found\..*extensions: \([^[:space:]]*\).*/::::\1/' \-e ' b fileparsed' \-e ' }' \-e ' s/'"'"' not found\..*/::::/' \-e ' :fileparsed' \-e ' s/\.e\{0,1\}ps::::$$/::::/' \-e ' h' \-e ' s/\(.*\)::::\(.*\)/# MISSING stem "\1" - allowed extensions are "\2" - leave comment here - it affects the build/' \-e ' p' \-e ' g' \-e ' s/::::.*//' \-e ' b addtargets' \-e '}' \-e 'd' \-e ':addtargets' \-e 's/[[:space:]]/\\\\\\&/g' \-e 'h' \-e 's/.*/-include &.gpi.d/' \-e 'p' \-e 'g' \-e 's!.*!$1.d: $$$$(call graphics-source,&)!' \-e 'p' \-e 's/.*//' \-e 'x' \-e 's!.*!$1.$(build_target_extension) $1._graphics: $$$$(call graphics-target,&)!' \-e 'p' \-e 'd' \$1.logendef# Get some special comments out of the source file (e.g., paper size, beamer# usage, etc.)## $(call get-source-specials,<source file name>,<output file>)define get-source-specials$(SED) \-e '/^%%[[:space:]]*\([^%].*\)[[:space:]]*$$/{' \-e ' s//\1/' \-e ' s/[[:space:]]//g' \-e ' /BEAMER/{' \-e ' /BEAMERLARGE/!d' \-e ' s/.*/BEAMER/' \-e ' }' \-e ' p' \-e ' d' \-e '}' \-e '/\\documentclass[^{]*{.*}/b procclass' \-e '/\\documentclass/,/}/{' \-e ' s/%.*//' \-e ' H' \-e ' /}/{' \-e ' s/.*//' \-e ' x' \-e ' b procclass' \-e ' }' \-e ' d' \-e '}' \-e 'd' \-e ':procclass' \-e 's/\\documentclass//' \-e 's/[][]//g' \-e 's/{.*}//' \-e 's/[[:cntrl:][:space:]]*//g' \-e 's/,/ /g' \-e 's/^/ /' \-e 's/$$/ /' \-e '/.* \([[:alnum:]]\{1,\}\)paper .*/{' \-e ' h' \-e ' s//PAPERSIZE=\1/' \-e ' p' \-e ' g' \-e '}' \-e '/.* landscape .*/{' \-e ' h' \-e ' s//ORIENTATION=landscape/' \-e ' p' \-e ' g' \-e '}' \-e 'd' \$1 > '$2'endef# Checks for build failure due to pstex inclusion, and gives instructions.## $(call die-on-pstexs,<parsed file>)define die-on-pstexsif $(EGREP) -q '^! LaTeX Error: File .*\.pstex.* not found' $1; then \$(ECHO) "$(C_ERROR)Missing pstex_t file(s)$(C_RESET)"; \$(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \$(ECHO) "$(C_ERROR) make all-pstex$(C_RESET)"; \$(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \exit 1; \fiendef# Checks for the use of import.sty and bails - we don't support subdirectories## $(call die-on-import-sty,<log file>)define die-on-import-styif $(EGREP) -s '/import.sty\)' '$1'; then \$(ECHO) "$(C_ERROR)import.sty is not supported - included files must"; \$(ECHO) "$(C_ERROR)be in the same directory as the primary document$(C_RESET)"; \exit 1; \fiendef# Checks for build failure due to dot2tex, and gives instructions.## $(call die-on-dot2tex,<parsed file>)define die-on-dot2texif $(EGREP) -q ' LaTeX Error: File .*\.dot_t.* not found' $1; then \$(ECHO) "$(C_ERROR)Missing dot_t file(s)$(C_RESET)"; \$(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \$(ECHO) "$(C_ERROR) make all-dot2tex$(C_RESET)"; \$(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \exit 1; \fiendef# Checks for the existence of a .aux file, and dies with an error message if it# isn't there. Note that we pass the file stem in, not the full filename,# e.g., to check for foo.aux, we call it thus: $(call die-on-no-aux,foo)## $(call die-on-no-aux,<aux stem>)define die-on-no-auxif $(call test-not-exists,$1.aux); then \$(call colorize-latex-errors,$1.log); \$(ECHO) "$(C_ERROR)Error: failed to create $1.aux$(C_RESET)"; \exit 1; \fiendef# Outputs all index files to stdout. Arg 1 is the source file stem, arg 2 is# the list of targets for the discovered dependency.## $(call get-log-index,<log file stem>,<target files>)define get-log-index$(SED) \-e 's/^No file \(.*\.ind\)\.$$/TARGETS=\1/' \-e 's/^No file \(.*\.[gn]ls\)\.$$/TARGETS=\1/' \-e 's/[[:space:]]/\\&/g' \-e '/^TARGETS=/{' \-e ' h' \-e ' s!^TARGETS=!$2: !p' \-e ' g' \-e ' s!^TARGETS=\(.*\)!\1: $1.tex!p' \-e '}' \-e 'd' \'$1.log' | $(SORT) | $(UNIQ)endef# Outputs all bibliography files to stdout. Arg 1 is the source stem, arg 2 is# a list of targets for each dependency found.## The script kills all lines that do not contain bibdata. Remaining lines have# the \bibdata macro and delimiters removed to create a dependency list. A# trailing comma is added, then all adjacent commas are collapsed into a single# comma. Then commas are replaced with the string .bib[space], and the# trailing space is killed off. Finally, all filename spaces are escaped.# This produces a list of space-delimited .bib filenames, which is what the# make dep file expects to see.## Note that we give kpsewhich a bogus argument so that a failure of sed to# produce output will not cause an error.## $(call get-bibs,<aux file>,<targets>)define get-bibs$(SED) \-e '/^\\bibdata/!d' \-e 's/\\bibdata{\([^}]*\)}/\1,/' \-e 's/,\{2,\}/,/g' \-e 's/[[:space:]]/\\&/g' \-e 's/,/.bib /g' \-e 's/ \{1,\}$$//' \'$1' | $(XARGS) $(KPSEWHICH) '#######' | \$(SED) \-e 's!.*!$2: $$(call path-norm,&)!' | \$(SORT) | $(UNIQ)endef# Makes a an aux file that only has stuff relevant to the target in it# $(call make-auxtarget-file,<flattened-aux>,<new-aux>)define make-auxtarget-file$(SED) \-e '/^\\newlabel/!d' \$1 > $2endef# Makes an aux file that only has stuff relevant to the bbl in it# $(call make-auxbbl-file,<flattened-aux>,<new-aux>)define make-auxbbl-file$(SED) \-e '/^\\newlabel/d' \$1 > $2endef# Makes a .gpi.d file from a .gpi file# $(call make-gpi-d,<.gpi>,<.gpi.d>)define make-gpi-d$(ECHO) '# vim: ft=make' > $2; \$(ECHO) 'ifndef INCLUDED_$(call cleanse-filename,$2)' >> $2; \$(ECHO) 'INCLUDED_$(call cleanse-filename,$2) := 1' >> $2; \$(call get-gpi-deps,$1,$(addprefix $(2:%.gpi.d=%).,$(GPI_OUTPUT_EXTENSION) gpi.d)) >> $2; \$(ECHO) 'endif' >> $2;endef# Parse .gpi files for data and loaded dependencies, output to stdout## The sed script here tries to be clever about obtaining valid# filenames from the gpi file. It assumes that the plot command starts its own# line, which is not too difficult a constraint to satisfy.## This command script also generates 'include' directives for every 'load'# command in the .gpi file. The load command must appear on a line by itself# and the file it loads must have the suffix .gpi. If you don't want it to be# compiled when running make graphics, then give it a suffix of ._include_.gpi.## $(call get-gpi-deps,<gpi file>,<targets>)define get-gpi-deps$(SED) \-e '/^[[:space:]]*s\{0,1\}plot/,/[^\\]$$/{' \-e ' H' \-e ' /[^\\]$$/{' \-e ' s/.*//' \-e ' x' \-e ' s/\\\{0,1\}\n//g' \-e ' s/^[[:space:]]*s\{0,1\}plot[[:space:]]*\(\[[^]]*\][[:space:]]*\)*/,/' \-e ' s/[[:space:]]*\(['"'"'\'"'"''"'"'"][^'"'"'\'"'"''"'"'"]*['"'"'\'"'"''"'"'"]\)\{0,1\}[^,]*/\1/g' \-e ' s/,['"'"'\'"'"''"'"'"]-\{0,1\}['"'"'\'"'"''"'"'"]//g' \-e ' s/[,'"'"'\'"'"''"'"'"]\{1,\}/ /g' \-e ' s/.*:.*/$$(error Error: Filenames with colons are not allowed: &)/' \-e ' s!.*!$2: &!' \-e ' p' \-e ' }' \-e ' d' \-e '}' \-e 's/^[[:space:]]*load[[:space:]]*['"'"'\'"'"''"'"'"]\([^'"'"'\'"'"''"'"'"]*\.gpi\)['"'"'\'"'"''"'"'"].*$$/-include \1.d/p' \-e 'd' \'$1'endef# Colorizes real, honest-to-goodness LaTeX errors that can't be overcome with# recompilation.## Note that we only ignore file not found errors for things that we know how to# build, like graphics files.## Also note that the output of this is piped through sed again to escape any# backslashes that might have made it through. This is to avoid sending things# like "\right" to echo, which interprets \r as LF. In bash, we could just do# ${var//\\/\\\\}, but in other popular sh variants (like dash), this doesn't# work.## $(call colorize-latex-errors,<log file>)define colorize-latex-errors$(SED) \-e '$${' \-e ' /^$$/!{' \-e ' H' \-e ' s/.*//' \-e ' }' \-e '}' \-e '/^$$/!{' \-e ' H' \-e ' d' \-e '}' \-e '/^$$/{' \-e ' x' \-e ' s/^\(\n\)\(.*\)/\2\1/' \-e '}' \-e '/^::P\(P\{1,\}\)::/{' \-e ' s//::\1::/' \-e ' G' \-e ' h' \-e ' d' \-e '}' \-e '/^::P::/{' \-e ' s//::0::/' \-e ' G' \-e '}' \-e 'b start' \-e ':needonemore' \-e 's/^/::P::/' \-e 'G' \-e 'h' \-e 'd' \-e ':needtwomore' \-e 's/^/::PP::/' \-e 'G' \-e 'h' \-e 'd' \-e ':needthreemore' \-e 's/^/::PPP::/' \-e 'G' \-e 'h' \-e 'd' \-e ':start' \-e '/^! LaTeX Error: File /{' \-e ' s/\n//g' \-e ' b needtwomore' \-e '}' \-e 's/^[^[:cntrl:]:]*:[[:digit:]]\{1,\}:/!!! &/' \-e 's/^\(.*\n\)\([^[:cntrl:]:]*:[[:digit:]]\{1,\}: .*\)/\1!!! \2/' \-e '/^!!! .*[[:space:][:cntrl:]]LaTeX[[:space:][:cntrl:]]Error:[[:space:][:cntrl:]]*File /{' \-e ' s/\n//g' \-e ' b needonemore' \-e '}' \-e '/^::0::! LaTeX Error: File .*/{' \-e ' /\n\n$$/{' \-e ' s/^::0:://' \-e ' b needonemore' \-e ' }' \-e ' s/^::0::! //' \-e ' s/^\(.*not found.\).*Enter file name:.*\n\(.*[[:digit:]]\{1,\}\): Emergency stop.*/\2: \1/' \-e ' b error' \-e '}' \-e '/^::0::!!! .*LaTeX Error: File .*/{' \-e ' /\n\n$$/{' \-e ' s/^::0:://' \-e ' b needonemore' \-e ' }' \-e ' s/::0::!!! //' \-e ' /File .*\.e\{0,1\}ps'"'"' not found/b skip' \-e ' /could not locate.*any of these extensions:/{' \-e ' b skip' \-e ' }' \-e ' s/\(not found\.\).*/\1/' \-e ' s/^/!!! /' \-e ' b error' \-e '}' \-e '/^\(.* LaTeX Error: Missing .begin.document.\.\).*/{' \-e ' s//\1 --- Are you trying to build an include file?/' \-e ' b error' \-e '}' \-e '/.*\(!!! .*Undefined control sequence\)[^[:cntrl:]]*\(.*\)/{' \-e ' s//\1: \2/' \-e ' s/\nl\.[[:digit:]][^[:cntrl:]]*\(\\[^\\[:cntrl:]]*\).*/\1/' \-e ' b error' \-e '}' \-e '/^\(!pdfTeX error:.*\)s*/{' \-e ' b error' \-e '}' \-e '/.*\(!!! .*\)/{' \-e ' s//\1/' \-e ' s/[[:cntrl:]]//' \-e ' s/[[:cntrl:]]$$//' \-e ' /Cannot determine size of graphic .*(no BoundingBox)/b skip' \-e ' b error' \-e '}' \-e ':skip' \-e 'd' \-e ':error' \-e 's/^!\(!! \)\{0,1\}\(.*\)/$(C_ERROR)\2$(C_RESET)/' \-e 'p' \-e 'd' \'$1' | $(SED) -e 's/\\\\/\\\\\\\\/g'endef# Colorize Makeindex errorsdefine colorize-makeindex-errors$(SED) \-e '/^!! /{' \-e ' N' \-e ' s/^.*$$/$(C_ERROR)&$(C_RESET)/' \-e ' p' \-e '}' \-e 'd' \'$1'endef# Colorize xindy errors# $(call colorize-xindy-errors,<log file>)define colorize-xindy-errors$(SED) \-e 's/^xindy:.*/$(C_ERROR)&$(C_RESET)/p' \-e 'd' \'$1'endef# Colorize epstopdf errors## $(call colorize-epstopdf-errors,<log file>)define colorize-epstopdf-errors$(SED) \-e '/^Error:/,/^Execution stack:/{' \-e ' /^Execution stack:/d' \-e ' s/.*/$(C_ERROR)&$(C_RESET)/' \-e ' p' \-e '}' \-e 'd' \'$1'endef# Colorize GNUplot errors## $(call colorize-gnuplot-errors,<log file>)define colorize-gnuplot-errors$(SED) \-e '/, line [0-9]*:/!{' \-e ' H' \-e ' x' \-e ' s/.*\n\(.*\n.*\)$$/\1/' \-e ' x' \-e '}' \-e '/, line [0-9]*:/{' \-e ' H' \-e ' /unknown.*terminal type/{' \-e ' s/.*/--- Try changing the GNUPLOT_OUTPUT_EXTENSION variable to '"'"'eps'"'"'./' \-e ' H' \-e ' }' \-e ' /gpihead/{' \-e ' s/.*/--- This could be a Makefile bug - contact the maintainer./' \-e ' H' \-e ' }' \-e ' g' \-e ' s/.*/$(C_ERROR)&$(C_RESET)/' \-e ' p' \-e '}' \-e '/^gnuplot>/,/^$$/{' \-e ' s/^gnuplot.*/$(C_ERROR)&/' \-e ' s/^$$/$(C_RESET)/' \-e ' p' \-e '}' \-e 'd' \$1endef# Colorize GraphViz errors## $(call colorize-dot-errors,<log file>)define colorize-dot-errors$(SED) \-e 's/.*not found.*/$(C_ERROR)&$(C_RESET)/p' \-e '/^Error:/,/context:/s/.*/$(C_ERROR)&$(C_RESET)/p' \-e 's/^Warning:.*/$(C_WARNING)&$(C_RESET)/p' \-e 'd' \'$1'endef# Get all important .aux files from the top-level .aux file and merges them all# into a single file, which it outputs to stdout.# It does this by finding all \input commands and creating a new sed script# that reads those files inline when it encounters one.# It then runs that sed script, generating a flattened aux file, and# then it cleans up the flattened file by removing some crufty things.## $(call flatten-aux,<toplevel aux>,<output file>)define flatten-aux$(SED) \-e '/\\@input{\(.*\)}/{' \-e ' s//\1/' \-e ' s![.:]!\\&!g' \-e ' h' \-e ' s!.*!\\:\\\\@input{&}:{!' \-e ' p' \-e ' x' \-e ' s/\\././g' \-e ' s/.*/r &/p' \-e ' s/.*/d/p' \-e ' s/.*/}/p' \-e ' d' \-e '}' \-e 'd' \'$1' > "$1.$$$$.sed.make"; \$(SED) -f "$1.$$$$.sed.make" '$1' > "$1.$$$$.make"; \$(SED) \-e '/^\\relax/d' \-e '/^\\bibcite/d' \-e 's/^\(\\newlabel{[^}]\{1,\}}\).*/\1/' \"$1.$$$$.make" | $(SORT) > '$2'; \$(call remove-temporary-files,$1.$$$$.make $1.$$$$.sed.make)endef# Generate pdf from postscript## Note that we don't just call ps2pdf, since there are so many versions of that# script on various systems. Instead, we call the postscript interpreter# directly.## $(call ps2pdf,infile,outfile,[embed fonts])define ps2pdf$(GS) \-dSAFER -dCompatibilityLevel=$(PS_COMPATIBILITY) \$(if $3,$(PS_EMBED_OPTIONS)) \-q -dNOPAUSE -dBATCH \-sDEVICE=pdfwrite -sstdout=%stderr \'-sOutputFile=$2' \-dSAFER -dCompatibilityLevel=$(PS_COMPATIBILITY) \$(if $3,$(PS_EMBED_OPTIONS)) \-c .setpdfwrite \-f '$1'endef# Colorize LaTeX output.color_tex := \$(SED) \-e '$${' \-e ' /^$$/!{' \-e ' H' \-e ' s/.*//' \-e ' }' \-e '}' \-e '/^$$/!{' \-e ' H' \-e ' d' \-e '}' \-e '/^$$/{' \-e ' x' \-e ' s/^\n//' \-e ' /Output written on /{' \-e ' s/.*Output written on \([^(]*\) (\([^)]\{1,\}\)).*/Success! Wrote \2 to \1/' \-e ' s/[[:digit:]]\{1,\}/$(C_PAGES)&$(C_RESET)/g' \-e ' s/Success!/$(C_SUCCESS)&$(C_RESET)/g' \-e ' s/to \(.*\)$$/to $(C_SUCCESS)\1$(C_RESET)/' \-e ' b end' \-e ' }' \-e ' / *LaTeX Error:.*/{' \-e ' s/.*\( *LaTeX Error:.*\)/\1/' \-e ' b error' \-e ' }' \-e ' /^[^[:cntrl:]:]*:[[:digit:]]\{1,\}:/b error' \-e ' /.*Warning:.*/{' \-e ' s//$(C_WARNING)&$(C_RESET)/' \-e ' b end' \-e ' }' \-e ' /Underfull.*/{' \-e ' s/.*\(Underfull.*\)/$(C_UNDERFULL)\1$(C_RESET)/' \-e ' b end' \-e ' }' \-e ' /Overfull.*/{' \-e ' s/.*\(Overfull.*\)/$(C_OVERFULL)\1$(C_RESET)/' \-e ' b end' \-e ' }' \-e ' d' \-e ' :error' \-e ' s/.*/$(C_ERROR)&$(C_RESET)/' \-e ' b end' \-e ' :end' \-e ' G' \-e '}'# Colorize BibTeX output.color_bib := \$(SED) \-e 's/^Warning--.*/$(C_WARNING)&$(C_RESET)/' \-e 't' \-e '/---/,/^.[^:]/{' \-e ' H' \-e ' /^.[^:]/{' \-e ' x' \-e ' s/\n\(.*\)/$(C_ERROR)\1$(C_RESET)/' \-e ' p' \-e ' s/.*//' \-e ' h' \-e ' d' \-e ' }' \-e ' d' \-e '}' \-e '/(.*error.*)/s//$(C_ERROR)&$(C_RESET)/' \-e 'd'# Make beamer output big enough to print on a full page. Landscape doesn't# seem to work correctly.enlarge_beamer = $(PSNUP) -l -1 -W128mm -H96mm -pletter# $(call test-run-again,<source stem>)define test-run-again$(EGREP) '^(.*Rerun .*|No file $1\.[^.]+\.)$$' $1.log \| $(EGREP) -q -v '^(Package: rerunfilecheck.*Rerun checks for auxiliary files.*)$$'endef# This tests whether the build target commands should be run at all, from# viewing the log file.# $(call test-log-for-need-to-run,<source stem>)define test-log-for-need-to-run$(SED) \-e '/^No file $(call escape-fname-regex,$1)\.aux\./d' \$1.log \| $(EGREP) '^(.*Rerun .*|No file $1\.[^.]+\.|No file .+\.tex\.|LaTeX Warning: File.*)$$' \| $(EGREP) -q -v '^(Package: rerunfilecheck.*Rerun checks for auxiliary files.*)$$'endef# LaTeX invocations## Note that we use## -recorder: generates .fls files for things that are input and output# -jobname: to make sure that .fls files are named after the source that created them# -file-line-error: to make sure that we have good line information for error output# -interaction=batchmode: so that we don't stop on errors (we'll parse logs for that)## $(call latex,<tex file stem, e.g., $*>,[extra LaTeX args])define run-latex$(latex_build_program) -jobname='$1' -interaction=batchmode -file-line-error $(LATEX_OPTS) $(if $2,$2,) $1 > /dev/null; \$(call transcript,latex,$1)endef# $(call latex-color-log,<LaTeX stem>)latex-color-log = $(color_tex) $1.log# $(call run-makeindex,<input>,<output>,<log>,[.ist style file])define run-makeindexsuccess=1; \if ! $(MAKEINDEX) -q $1 -t $3 -o $2 $(if $4,-s $4,) > /dev/null || $(EGREP) -q '^!!' $3; \then \$(call colorize-makeindex-errors,$3); \$(RM) -f '$2'; \success=0; \$(call transcript,makeindex,$1); \fi; \[ "$$success" = "1" ] && $(sh_true) || $(sh_false);endef# $(call run-xindy,<input>,<output>,<module>,<log>)define run-xindysuccess=1; \if ! $(XINDY) -q -o $2 -L $(XINDYLANG) -C $(XINDYENC) -I xindy -M $3 -t $4 $1 > /dev/null || $(EGREP) -q '^xindy:' $4; then \$(call colorize-xindy-errors,$4); \$(RM) -f '$2'; \success=0; \$(call transcript,xindy,$1); \fi; \[ "$$success" = "1" ] && $(sh_true) || $(sh_false);endef# This runs the given script to generate output, and it uses MAKE_RESTARTS to# ensure that it never runs it more than once for a particular root make# invocation.## $(call run-script,<interpreter>,<input>,<output>)define run-script$(call test-not-exists,$2.cookie) && $(ECHO) "restarts=$(RESTARTS)" \> $2.cookie && $(ECHO) "level=$(MAKELEVEL)" >> $2.cookie; \restarts=`$(SED) -n -e 's/^restarts=//p' $2.cookie`; \level=`$(SED) -n -e 's/^level=//p' $2.cookie`; \if $(EXPR) $(MAKELEVEL) '<=' $$level '&' $(RESTARTS) '<=' $$restarts >/dev/null; then \$(call echo-build,$2,$3,$(RESTARTS)-$(MAKELEVEL)); \$1 '$2' '$3'; \$(ECHO) "restarts=$(RESTARTS)" > '$2.cookie'; \$(ECHO) "level=$(MAKELEVEL)" >> '$2.cookie'; \fiendef# BibTeX invocations## $(call run-bibtex,<tex stem>)run-bibtex = $(BIBTEX) $1 | $(color_bib); $(call transcript,bibtex,$1)# $(call convert-eps-to-pdf,<eps file>,<pdf file>,[gray])# Note that we don't use the --filter flag because it has trouble with bounding boxes that way.define convert-eps-to-pdf$(if $3,$(CAT) '$1' | $(call kill-ps-color) > '$1.cookie',$(CP) '$1' '$1.cookie'); \$(EPSTOPDF) '$1.cookie' --outfile='$2' > $1.log; \$(call colorize-epstopdf-errors,$1.log);endef# $(call default-gpi-fontsize,<output file>)## Find the default fontsize given the *output* file (it is based on the output extension)#default-gpi-fontsize = $(if $(filter %.pdf,$1),$(DEFAULT_GPI_PDF_FONTSIZE),$(DEFAULT_GPI_EPS_FONTSIZE))# $(call gpi-fontsize,<gpi file>,<output file>)## Find out what the gnuplot fontsize should be. Tries, in this order:# - ##FONTSIZE comment in gpi file# - ##FONTSIZE comment in global gpi file# - default fontsize based on output typedefine gpi-fontsize$(strip $(firstword \$(shell $(SED) -e 's/^\#\#FONTSIZE=\([[:digit:]]\{1,\}\)/\1/p' -e 'd' $1 $(strip $(gpi_global))) \$(call default-gpi-fontsize,$2)))endef# $(call gpi-monochrome,<gpi file>,[gray])define gpi-monochrome$(strip $(if $2,monochrome,$(if $(shell $(EGREP) '^\#\#[[:space:]]*GRAY[[:space:]]*$$' $1 $(gpi_global)),monochrome,color)))endef# $(call gpi-font-entry,<output file>,<fontsize>)## Get the font entry given the output file (type) and the font size. For PDF# it uses fsize or font, for eps it just uses the bare number.gpi-font-entry = $(if $(filter %.pdf,$1),$(subst FONTSIZE,$2,$(GPI_FSIZE_SYNTAX)),$2)# $(call gpi-terminal,<gpi file><output file>,[gray])## Get the terminal settings for a given gpi and its intended output filedefine gpi-terminal$(if $(filter %.pdf,$2),pdf enhanced,postscript enhanced eps) \$(call gpi-font-entry,$2,$(call gpi-fontsize,$1,$2)) \$(call gpi-monochrome,$1,$3)endef# $(call gpi-embed-pdf-fonts,<input file>,<output file>)#define gpi-embed-pdf-fonts$(GS) \-q \-dSAFER \-dNOPAUSE \-dBATCH \-sDEVICE=$(if $(filter pdf,$(GPI_OUTPUT_EXTENSION)),pdfwrite,pswrite) \-sOutputFile='$2' \-sstdout=%stderr \-dColorConversionStrategy=/LeaveColorUnchanged \-dCompatibilityLevel=1.5 \-dPDFSETTINGS=/prepress \-c .setpdfwrite \-f '$1'endef# $(call convert-gpi,<gpi file>,<output file>,[gray])#define convert-gpi$(ECHO) 'set terminal $(call gpi-terminal,$1,$2,$3)' > $1head.make; \$(ECHO) 'set output "$2"' >> $1head.make; \$(if $(gpi_global),$(CAT) $(gpi_global) >> $1head.make;,) \fnames='$1head.make $1';\$(if $(gpi_sed),\$(SED) -f '$(gpi_sed)' $$fnames > $1.temp.make; \fnames=$1.temp.make;,\) \success=1; \if ! $(GNUPLOT) $$fnames 2>$1.log; then \$(call colorize-gnuplot-errors,$1.log); \success=0; \elif [ x"$(suffix $2)" = x".pdf" ]; then \if ! $(call gpi-embed-pdf-fonts,$2,$2.embed.tmp.make); then \success=0; \else \$(call move-if-exists,$2.embed.tmp.make,$2); \fi; \fi; \$(if $(gpi_sed),$(call remove-temporary-files,$1.temp.make);,) \$(call remove-temporary-files,$1head.make); \[ "$$success" = "1" ] && $(sh_true) || $(sh_false);endef# Creation of .eps files from .png files## The intermediate step of PNM (using NetPBM) produces much nicer output than# ImageMagick's "convert" binary. I couldn't get the right combination of# flags to make it look nice, anyway.## To handle gray scale conversion, we pipe things through ppmtopgm in the# middle.## $(call convert-png,<png file>,<eps file>)define convert-png$(PNGTOPNM) "$1" \$(if $3,| $(PPMTOPGM),) \| $(PNMTOPS) -noturn \> "$2"endef# Creation of .eps files from .jpg/.jpeg files## Thanks to brubakee for this solution.## Uses Postscript level 2 to avoid file size bloat# $(call convert-jpg,<jpg file>,<eps file>)define convert-jpg$(CONVERT) $(if $3,-type Grayscale,) '$1' eps2:'$2'endef# Creation of .eps files from .fig files# $(call convert-fig,<fig file>,<output file>,[gray])convert-fig = $(FIG2DEV) -L $(if $(filter %.pdf,$2),pdf,eps) $(if $3,-N,) $1 $2# Creation of .pstex files from .fig files# $(call convert-fig-pstex,<fig file>,<pstex file>)convert-fig-pstex = $(FIG2DEV) -L pstex $1 $2 > /dev/null 2>&1# Creation of .pstex_t files from .fig files# $(call convert-fig-pstex-t,<fig file>,<pstex file>,<pstex_t file>)convert-fig-pstex-t = $(FIG2DEV) -L pstex_t -p $3 $1 $2 > /dev/null 2>&1# Creation of .dot_t files from .dot files# #(call convert-dot-tex,<dot file>,<dot_t file>)convert-dot-tex = $(DOT2TEX) '$1' > '$2'# Converts svg files into .eps files## $(call convert-svg,<svg file>,<eps/pdf file>,[gray])convert-svg = $(INKSCAPE) --without-gui $(if $(filter %.pdf,$2),--export-pdf,--export-eps)='$2' '$1'# Converts xvg files into .eps files## $(call convert-xvg,<xvg file>,<eps file>,[gray])convert-xvg = $(XMGRACE) '$1' -printfile - -hardcopy -hdevice $(if $3,-mono,) EPS > '$2'# Converts .eps.gz files into .eps files## $(call convert-epsgz,<eps.gz file>,<eps file>,[gray])convert-epsgz = $(GUNZIP) -c '$1' $(if $3,| $(call kill-ps-color)) > '$2'# Generates a .bb file from a .eps file (sometimes latex really wants this)## $(call eps-bb,<eps file>,<eps.bb file>)define eps-bb$(SED) \-e '/^%%Title:/p' \-e '/^%%Creator:/p' \-e '/^%%BoundingBox:/p' \-e '/^%%CreationDate:/p' \-e '/^%%EndComments/{' \-e ' d' \-e ' q' \-e '}' \-e 'd' \$1 > "$2"endef# Converts .eps files into .eps files (usually a no-op, but can make grayscale)## $(call convert-eps,<in file>,<out file>,[gray])convert-eps = $(if $3,$(call kill-ps-color) $1 > $2)# The name of the file containing special postscript commands for grayscalegray_eps_file := gray.eps.make# Changes sethsbcolor and setrgbcolor calls in postscript to always produce# grayscale. In general, this is accomplished by writing new versions of those# functions into the user dictionary space, which is looked up before the# global or system dictionaries (userdict is one of the permanent dictionaries# in postscript and is not read-only like systemdict).## For setrgbcolor, the weighted average of the triple is computed and the# triple is replaced with three copies of that average before the original# procedure is called: .299R + .587G + .114B## For sethsbcolor, the color is first converted to RGB, then to grayscale by# the new setrgbcolor operator as described above. Why is this done?# Because simply using the value component will tend to make pure colors# white, a very undesirable thing. Pure blue should not translate to white,# but to some level of gray. Conversion to RGB does the right thing. It's# messy, but it works.## From# http://en.wikipedia.org/wiki/HSV_color_space#Transformation_from_HSV_to_RGB,# HSB = HSV (Value = Brightness), and the formula used to convert to RGB is# as follows:## Hi = int(floor(6 * H)) mod 6# f = 6 * H - Hi# p = V(1-S)# q = V(1-fS)# t = V(1-(1-f)S)# if Hi = 0: R G B <-- V t p# if Hi = 1: R G B <-- q V p# if Hi = 2: R G B <-- p V t# if Hi = 3: R G B <-- p q V# if Hi = 4: R G B <-- t p V# if Hi = 5: R G B <-- V p q## The messy stack-based implementation is below# $(call create-gray-eps-file,filename)define create-gray-eps-file$(ECHO) -n -e '\/OLDRGB /setrgbcolor load def\n\/setrgbcolor {\n\.114 mul exch\n\.587 mul add exch\n\.299 mul add\n\dup dup\n\OLDRGB\n\} bind def\n\/OLDHSB /sethsbcolor load def\n\/sethsbcolor {\n\2 index % H V S H\n\6 mul floor cvi 6 mod % Hi V S H\n\3 index % H Hi V S H\n\6 mul % 6H Hi V S H\n\1 index % Hi 6H Hi V S H\n\sub % f Hi V S H\n\2 index 1 % 1 V f Hi V S H\n\4 index % S 1 V f Hi V S H\n\sub mul % p f Hi V S H\n\3 index 1 % 1 V p f Hi V S H\n\6 index % S 1 V p f Hi V S H\n\4 index % f S 1 V p f Hi V S H\n\mul sub mul % q p f Hi V S H\n\4 index 1 1 % 1 1 V q p f Hi V S H\n\5 index % f 1 1 V q p f Hi V S H\n\sub % (1-f) 1 V q p f Hi V S H\n\8 index % S (1-f) 1 V q p f Hi V S H\n\mul sub mul % t q p f Hi V S H\n\4 -1 roll pop % t q p Hi V S H\n\7 -2 roll pop pop % t q p Hi V\n\5 -2 roll % Hi V t q p\n\dup 0 eq\n\{1 index 3 index 6 index}\n\{\n\dup 1 eq\n\{3 index 2 index 6 index}\n\{\n\dup 2 eq\n\{4 index 2 index 4 index}\n\{\n\dup 3 eq\n\{4 index 4 index 3 index}\n\{\n\dup 4 eq\n\{2 index 5 index 3 index}\n\{\n\dup 5 eq\n\{1 index 5 index 5 index}\n\{0 0 0}\n\ifelse\n\}\n\ifelse\n\}\n\ifelse\n\}\n\ifelse\n\}\n\ifelse\n\}\n\ifelse % B G R Hi V t q p\n\setrgbcolor\n\5 {pop} repeat\n\} bind def\n'\> $1endef# This actually inserts the color-killing code into a postscript file# $(call kill-ps-color)define kill-ps-color$(SED) -e '/%%EndComments/r $(gray_eps_file)'endef# Converts graphviz .dot files into .eps files# Grayscale is not directly supported by dot, so we pipe it through fig2dev in# that case.# $(call convert-dot,<dot file>,<eps file>,<log file>,[gray])define convert-dot$(DOT) -Tps '$1' 2>'$3' $(if $4,| $(call kill-ps-color)) > $2; \$(call colorize-dot-errors,$3)endef# Convert DVI to Postscript# $(call make-ps,<dvi file>,<ps file>,<log file>,[<paper size>],[<beamer info>])make-ps = \$(DVIPS) -z -o '$2' $(if $(strip $4),-t$(strip $4),) '$1' \$(if $5,| $(enlarge_beamer)) > $3 2>&1# Convert Postscript to PDF# $(call make-pdf,<ps file>,<pdf file>,<log file>,<embed file>)make-pdf = \$(call ps2pdf,$1,$2,$(filter 1,$(shell $(CAT) '$4'))) > '$3' 2>&1# Display information about what is being done# $(call echo-build,<input file>,<output file>,[<run number>])echo-build = $(ECHO) "$(C_BUILD)= $1 --> $2$(if $3, ($3),) =$(C_RESET)"echo-graphic = $(ECHO) "$(C_GRAPHIC)= $1 --> $2 =$(C_RESET)"echo-dep = $(ECHO) "$(C_DEP)= $1 --> $2 =$(C_RESET)"# Display a list of something# $(call echo-list,<values>)echo-list = for x in $1; do $(ECHO) "$$x"; done## DEFAULT TARGET#.PHONY: allall: $(default_pdf_targets) ;.PHONY: all-pdfall-pdf: $(default_pdf_targets) ;ifeq "$(strip $(BUILD_STRATEGY))" "latex".PHONY: all-psall-ps: $(default_ps_targets) ;.PHONY: all-dviall-dvi: $(default_dvi_targets) ;endif## VIEWING TARGET#.PHONY: showshow: all$(QUIET)for x in $(default_pdf_targets); do \[ -e "$$x" ] && $(VIEW_PDF) $$x & \done## INCLUDES#source_includes := $(addsuffix .d,$(source_stems_to_include))graphic_includes := $(addsuffix .gpi.d,$(graphic_stems_to_include))# Check the version of the makefileifneq "" "$(filter 3.79 3.80,$(MAKE_VERSION))"$(warning $(C_WARNING)Your version of make is too old. Please upgrade.$(C_RESET))endif# Include only the dependencies usedifneq "" "$(source_includes)"include $(source_includes)$(call include-message,$(source_includes))endififneq "" "$(graphic_includes)"include $(graphic_includes)$(call include-message,$(graphic_includes))endif## MAIN TARGETS## Note that we don't just say %: %.pdf here - this can tend to mess up our# includes, which detect what kind of file we are asking for. For example,# asking to build foo.pdf is much different than asking to build foo when# foo.gpi exists, because we look through all of the goals for *.pdf that# matches *.gpi, then use that to determine which include files we need to# build.## Thus, we invoke make recursively with better arugments instead, restarting# all of the appropriate machinery..PHONY: $(default_stems_ss)$(default_stems_ss): %: %.pdf ;# This builds and displays the wanted file..PHONY: $(addsuffix ._show,$(stems_ssg))$(addsuffix ._show,$(stems_ssg)): %._show: %.pdf$(QUIET)$(VIEW_PDF) $< &ifeq "$(strip $(BUILD_STRATEGY))" "latex".SECONDARY: $(all_pdf_targets)%.pdf: %.ps %.embed.make$(QUIET)$(call echo-build,$<,$@)$(QUIET)$(call make-pdf,$<,$@.temp,$@.log,$*.embed.make); \if [ x"$$?" = x"0" ]; then \$(if $(VERBOSE),$(CAT) $@.log,:); \$(RM) -f '$@'; \$(MV) '$@.temp' '$@'; \$(TOUCH) '$@'; \$(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \else \$(CAT) $@.log; \$(call remove-temporary-files,'$@.temp'); \$(sh_false); \fi.SECONDARY: $(all_ps_targets)%.ps: %.dvi %.paper.make %.beamer.make$(QUIET)$(call echo-build,$<,$@)$(QUIET)$(call make-ps,$<,$@.temp,$@.log,\$(strip $(shell $(CAT) $*.paper.make)),\$(strip $(shell $(CAT) $*.beamer.make))); \if [ x"$$?" = x"0" ]; then \$(if $(VERBOSE),$(CAT) $@.log,:); \$(RM) -f '$@'; \$(MV) '$@.temp' '$@'; \$(TOUCH) '$@'; \$(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \else \$(CAT) $@.log; \$(call remove-temporary-files,'$@.temp'); \$(sh_false); \fiendif# Build the final target (dvi or pdf) file. This is a very tricky rule because# of the way that latex runs multiple times, needs graphics after the first run# (or maybe already has them), and relies on bibliographies or indices that may# not exist.## Check the log for fatal errors. If they exist, colorize and bail.## Create the .auxtarget.cookie file. (Needed for next time if not present)## If any of the following are true, we must rebuild at least one time:## * the .bbl was recently rebuilt## check a cookie, then delete it## * any of several output files was created or changed:## check $*.run.cookie, then delete it## * the .aux file changed in a way that necessitates attention## Note that if the .auxtarget.make file doesn't exist, this means# that we are doing a clean build, so it doesn't figure into the# test for running again.## compare against .auxtarget.make## move if different, remove if not## * the .log file has errors or warnings requiring at least one more run## We use a loop over a single item to simplify the process of breaking# out when we find one of the conditions to be true.## If we do NOT need to run latex here, then we move the $@.1st.make file# over to $@ because the target file has already been built by the first# dependency run and is valid.## If we do, we delete that cookie file and do the normal multiple-runs# routine.#ifeq "$(strip $(BUILD_STRATEGY))" "latex".SECONDARY: $(all_dvi_targets)endif%.$(build_target_extension): %.bbl %.aux %.$(build_target_extension).1st.make$(QUIET)\fatal=`$(call colorize-latex-errors,$*.log)`; \if [ x"$$fatal" != x"" ]; then \$(ECHO) "$$fatal"; \exit 1; \fi; \$(call make-auxtarget-file,$*.aux.make,$*.auxtarget.cookie); \run=0; \for i in 1; do \if $(call test-exists,$*.bbl.cookie); then \$(call set-run-reason,$*.bbl.cookie is present); \run=1; \break; \fi; \if $(call test-exists,$*.run.cookie); then \$(call set-run-reason,$*.run.cookie is present); \run=1; \break; \fi; \if $(call \test-exists-and-different,$*.auxtarget.cookie,$*.auxtarget.make);\then \$(call set-run-reason,$*.auxtarget.cookie differs from $*.auxtarget.make); \run=1; \break; \fi; \if $(call test-log-for-need-to-run,$*); then \$(call set-run-reason,$*.log indicated that this is necessary); \run=1; \break; \fi; \if $(call test-not-exists,$@.1st.make); then \$(call set-run-reason,$@.1st.make does not exist); \run=1; \break; \fi; \done; \$(call remove-temporary-files,$*.bbl.cookie $*.run.cookie); \$(MV) $*.auxtarget.cookie $*.auxtarget.make; \if [ x"$$run" = x"1" ]; then \$(call remove-files,$@.1st.make); \for i in 2 3 4 5; do \$(if $(findstring 3.79,$(MAKE_VERSION)),\$(call echo-build,$*.tex,$@,$(RESTARTS)-$$$$i),\$(call echo-build,$*.tex,$@,$(RESTARTS)-$$i)\); \$(call run-latex,$*); \$(CP) '$*.log' '$*.'$(RESTARTS)-$$i'.log'; \if $(call test-run-again,$*); then \$(call set-run-reason,rerun requested by $*.log); \else \break; \fi; \done; \else \$(MV) '$@.1st.make' '$@'; \fi; \$(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \$(call latex-color-log,$*)# Build the .bbl file. When dependencies are included, this will (or will# not!) depend on something.bib, which we detect, acting accordingly. The# dependency creation also produces the %.auxbbl.make file. BibTeX is a bit# finicky about what you call the actual files, but we can rest assured that if# a .auxbbl.make file exists, then the .aux file does, as well. The# .auxbbl.make file is a cookie indicating whether the .bbl needs to be# rewritten. It only changes if the .aux file changes in ways relevant to .bbl# creation.## Note that we do NOT touch the .bbl file if there is no need to# create/recreate it. We would like to leave existing files alone if they# don't need to be changed, thus possibly avoiding a rebuild trigger.%.bbl: %.auxbbl.make$(QUIET)\$(if $(filter %.bib,$^),\$(call echo-build,$(filter %.bib,$?) $*.aux,$@); \$(call set-run-reason,dependencies of $@ changed); \$(call run-bibtex,$*); \$(TOUCH) $@.cookie; \) \if $(EGREP) -q 'bibstyle.(apacite|apacann|chcagoa|[^}]*annot)' '$*.aux'; then \$(call echo-build,** annotated extra latex **,output ignored,$(RESTARTS)-1); \$(call run-latex,$*); \$(CP) '$*.log' '$*.$(RESTARTS)-annotated.log'; \$(if $(filter %.bib,$^),\$(call echo-build,** annotated extra bibtex ** $(filter %.bib,$?) $*.aux,$@); \$(call run-bibtex,$*); \$(TOUCH) $@.cookie; \) \$(call echo-build,** annotated extra latex **,output ignored,$(RESTARTS)-2); \$(call run-latex,$*); \fi# Create the index file - note that we do *not* depend on %.tex here, since# that unnecessarily restricts the kinds of indices that we can build to those# with exactly the same stem as the source file. Things like splitidx create# idx files with other names.## Therefore, we add the .tex dependency in the sourcestem.d file in the call to# get index file dependencies from the logs.%.ind: %.idx$(QUIET)$(call echo-build,$<,$@)$(QUIET)$(call run-makeindex,$<,$@,$*.ilg)# Create a glossary file from a .ist file%.gls: %.glo %.tex %.ist$(QUIET)$(call echo-build,$<,$@)$(QUIET)$(call run-makeindex,$<,$@,$*.glg,$*.ist)# Create a glossary file from a glossary input formatted for xindy%.gls: %.glo %.tex %.xdy$(QUIET)$(call echo-build,$<,$@)$(QUIET)$(call run-xindy,$<,$@,$*,$*.glg)# Create the glossary file from a nomenclature file%.gls: %.glo %.tex $(call path-norm,$(shell $(KPSEWHICH) nomencl.ist || $(ECHO) nomencl.ist))$(QUIET)$(call echo-build,$<,$@)$(QUIET)$(call run-makeindex,$<,$@,$*.glg,nomencl.ist)# Create the nomenclature file%.nls: %.nlo %.tex $(call path-norm,$(shell $(KPSEWHICH) nomencl.ist || $(ECHO) nomencl.ist))$(QUIET)$(call echo-build,$<,$@)$(QUIET)$(call run-makeindex,$<,$@,$*.nlg,nomencl.ist)# Precompile the format file%.fmt: %.tex$(QUIET)$(call echo-build,$<,$@)$(QUIET)\$(call run-latex,$*,-ini "&$(latex_build_program) $*.tex\dump"); \fatal=`$(call colorize-latex-errors,$*.log)`; \if [ x"$$fatal" != x"" ]; then \$(ECHO) "$$fatal"; \exit 1; \fi;# SCRIPTED LaTeX TARGETS## Keep the generated .tex files around for debugging if needed..SECONDARY: $(all_tex_targets)%.tex:: %.tex.sh$(QUIET)$(call run-script,$(SHELL),$<,$@)%.tex:: %.tex.py$(QUIET)$(call run-script,$(PYTHON),$<,$@)%.tex:: %.tex.pl$(QUIET)$(call run-script,$(PERL),$<,$@)%.tex:: %.rst $(RST_STYLE_FILE)$(QUIET)\$(call run-script,$(RST2LATEX)\--documentoptions=letterpaper\$(if $(RST_STYLE_FILE),--stylesheet=$(RST_STYLE_FILE),),$<,$@)%.tex:: %.lhs$(QUIET)\function run_lhs2tex() { $(LHS2TEX) -o "$$2" "$$1"; }; \$(call run-script,run_lhs2tex,$<,$@)## GRAPHICS TARGETS#.PHONY: all-graphicsall-graphics: $(all_graphics_targets);ifeq "$(strip $(BUILD_STRATEGY))" "latex".PHONY: all-pstexall-pstex: $(all_pstex_targets);endif.PHONY: all-dot2texall-dot2tex: $(all_dot2tex_targets);.PHONY: show-graphicsshow-graphics: all-graphics$(VIEW_GRAPHICS) $(all_known_graphics)$(gray_eps_file):$(QUIET)$(call echo-build,$^,$@)$(QUIET)$(call create-gray-eps-file,$@)ifeq "$(strip $(BUILD_STRATEGY))" "pdflatex"%.pdf: %.eps $(if $(GRAY),$(gray_eps_file))$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-eps-to-pdf,$<,$@,$(GRAY))ifeq "$(strip $(GPI_OUTPUT_EXTENSION))" "pdf"%.pdf: %.gpi %.gpi.d $(gpi_sed) $(gpi_global)$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-gpi,$<,$@,$(GRAY))endif%.pdf: %.fig$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-fig,$<,$@,$(GRAY))%.pdf: %.svg$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-svg,$<,$@,$(GRAY))endififeq "$(strip $(BUILD_STRATEGY))" "xelatex"%.pdf: %.eps $(if $(GRAY),$(gray_eps_file))$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-eps-to-pdf,$<,$@,$(GRAY))ifeq "$(strip $(GPI_OUTPUT_EXTENSION))" "pdf"%.pdf: %.gpi %.gpi.d $(gpi_sed) $(gpi_global)$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-gpi,$<,$@,$(GRAY))endif%.pdf: %.fig$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-fig,$<,$@,$(GRAY))endif# TODO: capture mpost output and display errors# TODO: figure out why pdf generation is erroring out (but working anyway)%.eps %.mps %.mpx %.log: %.mp$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(MPOST) $*$(QUIET)$(call move-if-exists,$*.mps,$*.eps)$(QUIET)$(call move-if-exists,$*.log,$*.log.make)$(QUIET)$(call move-if-exists,$*.mpx,$*.mpx.make)%.eps: %.gpi %.gpi.d $(gpi_sed) $(gpi_global)$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-gpi,$<,$@,$(GRAY))%.eps: %.fig$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-fig,$<,$@,$(GRAY))%.eps: %.dot $(if $(GRAY),$(gray_eps_file))$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-dot,$<,$@,$<.log,$(GRAY))%.eps: %.xvg $(if $(GRAY),$(gray_eps_file))$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-xvg,$<,$@,$(GRAY))ifneq "$(default_graphic_extension)" "pdf"# We have a perfectly good build rule for svg to pdf, so we eliminate this to# avoid confusing make (it sometimes chooses to go svg -> eps -> pdf).%.eps: %.svg $(if $(GRAY),$(gray_eps_file))$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-svg,$<,$@,$(GRAY))# Similarly for these, we don't need eps if we have supported extensions# already.%.eps: %.jpg $(if $(GRAY),$(gray_eps_file))$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-jpg,$<,$@,$(GRAY))%.eps: %.jpeg $(if $(GRAY),$(gray_eps_file))$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-jpg,$<,$@,$(GRAY))%.eps: %.png $(if $(GRAY),$(gray_eps_file))$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-png,$<,$@,$(GRAY))endif%.eps.bb: %.eps$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call eps-bb,$<,$@)%.eps: %.eps.gz $(if $(GRAY),$(gray_eps_file))$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-epsgz,$<,$@,$(GRAY))%.pstex: %.fig$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-fig-pstex,$<,$@,$(GRAY))%.pstex_t: %.fig %.pstex$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-fig-pstex-t,$<,$@,$*.pstex,$(GRAY))%.dot_t: %.dot$(QUIET)$(call echo-graphic,$^,$@)$(QUIET)$(call convert-dot-tex,$<,$@)## DEPENDENCY-RELATED TARGETS.## Generate all of the information needed to get dependencies# As a side effect, this creates a .dvi or .pdf file (depending on the build# strategy). We need to be sure to remove it if there are errors. Errors can# take several forms and all of them are found within the log file:# * There was a LaTeX error# * A needed file was not found# * Cross references need adjustment## Behavior:# This rule is responsible for generating the following:# %.aux# %.d# %.aux.make# %.(pdf|dvi).1st.make (the .pdf or .dvi output file, moved)## Steps:## Run latex# Move .pdf or .dvi somewhere else (make no judgements about success)# Flatten the .aux file into another file# Add source dependencies# Add graphic dependencies# Add bib dependencies## Create cookies for various suffixes that may represent files that# need to be read by LaTeX in order for it to function properly.## Note that if some of the dependencies are discovered because they turn# up missing in the log file, we really need the .d file to be reloaded.# Adding a sleep command helps with this. Otherwise make is extremely# nondeterministic, sometimes working, sometimes not.## Usually we can force this by simply removing the generated pdf file and# not creating a .1st.make file..#%.$(build_target_extension).1st.make %.d %.aux %.aux.make %.fls: %.tex$(QUIET)$(call echo-build,$<,$*.d $*.$(build_target_extension).1st.make,$(RESTARTS)-1)$(QUIET)\$(call set-run-reason,need to build .d and .$(build_target_extension).1st.make); \$(call run-latex,$*,-recorder) || $(sh_true); \$(CP) '$*.log' '$*.$(RESTARTS)-1.log'; \$(call die-on-import-sty,$*.log); \$(call die-on-dot2tex,$*.log); \$(call die-on-no-aux,$*); \$(call flatten-aux,$*.aux,$*.aux.make); \$(ECHO) "# vim: ft=make" > $*.d; \$(ECHO) ".PHONY: $*._graphics" >> $*.d; \$(call get-inputs,$*.fls,$(addprefix $*.,aux aux.make d $(build_target_extension))) >> $*.d; \$(call get-format,$<,$(addprefix $*.,fls aux aux.make d $(build_target_extension) $(build_target_extension).1st.make)) >> $*.d; \$(call get-missing-inputs,$*.log,$(addprefix $*.,aux aux.make d $(build_target_extension))) >> $*.d; \$(ECHO) ".SECONDEXPANSION:" >> $*.d; \$(call get-graphics,$*) >> $*.d; \$(call get-log-index,$*,$(addprefix $*.,aux aux.make)) >> $*.d; \$(call get-bibs,$*.aux.make,$(addprefix $*.,bbl aux aux.make)) >> $*.d; \$(EGREP) -q "# MISSING stem" $*.d && $(SLEEP) 1 && $(RM) $*.pdf; \$(EGREP) -q "# MISSING format" $*.d && $(RM) $*.pdf; \$(call move-if-exists,$*.$(build_target_extension),$*.$(build_target_extension).1st.make); \for s in toc out lot lof lol nav; do \if [ -e "$*.$$s" ]; then \if ! $(DIFF) -q $*.$$s $*.$$s.make >/dev/null 2>&1; then \$(TOUCH) $*.run.cookie; \fi; \$(CP) $*.$$s $*.$$s.make; \fi; \done# This is a cookie that is updated if the flattened aux file has changed in a# way that affects the bibliography generation..SECONDARY: $(addsuffix .auxbbl.make,$(stems_ssg))%.auxbbl.make: %.aux.make$(QUIET)\$(call make-auxbbl-file,$<,$@.temp); \$(call replace-if-different-and-remove,$@.temp,$@)# Build a dependency file for .gpi files. These often plot data files that# also reside in the directory, so if a data file changes, it's nice to know# about it. This also handles loaded .gpi files, whose filename should have# _include_. in it.%.gpi.d: %.gpi$(QUIET)$(call echo-build,$<,$@)$(QUIET)$(call make-gpi-d,$<,$@)# Get source specials, e.g., paper size and special %% comments.%.specials.make: %.tex$(QUIET)$(call get-source-specials,$<,$@)# Get info about whether to enlarge beamer postscript files (for use with# dvips, and requires a special comment in the source file)..SECONDARY: $(addsuffix .specials.make,$(all_stems_ss))%.beamer.make: %.specials.make$(QUIET)$(SED) -e 's/^BEAMER.*/BEAMER/p' -e 'd' '$<' > '$@'# Store the paper size for this document -- note that if beamer is used we set# it to the special BEAMER paper size. We only do this, however, if the# special comment exists, in which case we enlarge the output with psnup.## The paper size is extracted from a documentclass attribute.%.paper.make: %.specials.make$(QUIET)$(SED) -e 's/^PAPERSIZE=//p' -e 'd' '$<' > '$@'# Store embedding instructions for this document using a special comment%.embed.make: %.specials.make$(QUIET)$(EGREP) '^NOEMBED$$' $< \&& $(ECHO) '' > $@ \|| $(ECHO) '1' > $@;## HELPFUL PHONY TARGETS#.PHONY: _all_programs_all_programs:$(QUIET)$(ECHO) "== All External Programs Used =="$(QUIET)$(call output-all-programs).PHONY: _check_programs_check_programs:$(QUIET)$(ECHO) "== Checking Makefile Dependencies =="; $(ECHO)$(QUIET) \allprogs=`\($(call output-all-programs)) | \$(SED) \-e 's/^[[:space:]]*//' \-e '/^#/d' \-e 's/[[:space:]]*#.*//' \-e '/^=/s/[[:space:]]/_/g' \-e '/^[[:space:]]*$$/d' \-e 's/^[^=].*=[[:space:]]*\([^[:space:]]\{1,\}\).*$$/\\1/' \`; \spaces=' '; \for p in $${allprogs}; do \case $$p in \=*) $(ECHO); $(ECHO) "$$p";; \*) \$(ECHO) -n "$$p:$$spaces" | $(SED) -e 's/^\(.\{0,20\}\).*$$/\1/'; \loc=`$(WHICH) $$p`; \if [ x"$$?" = x"0" ]; then \$(ECHO) "$(C_SUCCESS)Found:$(C_RESET) $$loc"; \else \$(ECHO) "$(C_FAILURE)Not Found$(C_RESET)"; \fi; \;; \esac; \done.PHONY: _check_gpi_files_check_gpi_files:$(QUIET)$(ECHO) "== Checking all .gpi files for common errors =="; \$(ECHO); \for f in $(files.gpi); do \result=`$(EGREP) '^([^#]*set terminal |set output )' $$f`; \$(ECHO) -n "$$f: "; \if [ x"$$result" = x"" ]; then \$(ECHO) "$(C_SUCCESS)Okay$(C_RESET)"; \else \$(ECHO) "$(C_FAILURE)Warning: Problematic commands:$(C_RESET)";\$(ECHO) "$(C_ERROR)$$result$(C_RESET)"; \fi; \done; \$(ECHO).PHONY: _all_stems_all_stems:$(QUIET)$(ECHO) "== All Stems =="$(QUIET)$(call echo-list,$(sort $(default_stems_ss))).PHONY: _includes_includes:$(QUIET)$(ECHO) "== Include Stems =="$(QUIET)$(ECHO) "=== Sources ==="$(QUIET)$(call echo-list,$(sort $(source_includes)))$(QUIET)$(ECHO) "=== Graphics ==="$(QUIET)$(call echo-list,$(sort $(graphic_includes))).PHONY: _all_sources_all_sources:$(QUIET)$(ECHO) "== All Sources =="$(QUIET)$(call echo-list,$(sort $(all_files.tex))).PHONY: _dependency_graph_dependency_graph:$(QUIET)$(ECHO) "/* LaTeX Dependency Graph */"$(QUIET)$(call output-dependency-graph).PHONY: _show_dependency_graph_show_dependency_graph:$(QUIET)$(call output-dependency-graph,$(graph_stem).dot)$(QUIET)$(DOT) -Tps -o $(graph_stem).eps $(graph_stem).dot$(QUIET)$(VIEW_POSTSCRIPT) $(graph_stem).eps$(QUIET)$(call remove-temporary-files,$(graph_stem).*).PHONY: _sources_sources:$(QUIET)$(ECHO) "== Sources =="$(QUIET)$(call echo-list,$(sort $(files.tex))).PHONY: _source_gens_source_gens:$(QUIET)$(ECHO) "== Generated Sources =="$(QUIET)$(call echo-list,$(sort $(files_source_gen))).PHONY: _scripts_scripts:$(QUIET)$(ECHO) "== Scripts =="$(QUIET)$(call echo-list,$(sort $(files_scripts))).PHONY: _graphic_outputs_graphic_outputs:$(QUIET)$(ECHO) "== Graphic Outputs =="$(QUIET)$(call echo-list,$(sort $(all_graphics_targets))).PHONY: _env_env:ifdef .VARIABLES$(QUIET)$(ECHO) "== MAKE VARIABLES =="$(QUIET)$(call echo-list,$(foreach var,$(sort $(.VARIABLES)),'$(var)'))endif$(QUIET)$(ECHO) "== ENVIRONMENT =="$(QUIET)$(ENV)## CLEAN TARGETS## clean-generated is somewhat unique - it relies on the .fls file being# properly built so that it can determine which of the files was generated, and# which was not. Expect it to silently fail if the .fls file is missing.## This is used to, e.g., clean up index files that are generated by the LaTeX..PHONY: clean-generatedclean-generated:$(QUIET)$(call clean-files,$(foreach e,$(addsuffix .fls,$(all_stems_source)),\$(shell $(call get-generated-names,$e)))).PHONY: clean-depsclean-deps:$(QUIET)$(call clean-files,$(all_d_targets) *.make *.make.temp *.cookie).PHONY: clean-texclean-tex: clean-deps$(QUIET)$(call clean-files,$(rm_tex)).PHONY: clean-graphics# TODO: This *always* deletes pstex files, even if they were not generated by# anything.... In other words, if you create a pstex and pstex_t pair by hand# an drop them in here without the generating fig file, they will be deleted# and you won't get them back. It's a hack put in here because I'm not sure we# even want to keep pstex functionality, so my motivation is not terribly high# for doing it right.clean-graphics:$(QUIET)$(call clean-files,$(all_graphics_targets) *.gpi.d *.pstex *.pstex_t *.dot_t).PHONY: clean-backupsclean-backups:$(QUIET)$(call clean-files,$(backup_patterns) *.temp).PHONY: clean-auxiliaryclean-auxiliary:$(QUIET)$(call clean-files,$(graph_stem).*).PHONY: clean-nographicsclean-nographics: clean-tex clean-deps clean-backups clean-auxiliary ;.PHONY: cleanclean: clean-generated clean-tex clean-graphics clean-deps clean-backups clean-auxiliary ;## HELP TARGETS#.PHONY: helphelp:$(help_text).PHONY: versionversion:$(QUIET)\$(ECHO) "$(fileinfo) Version $(version)"; \$(ECHO) "by $(author)"; \## HELP TEXT#define help_text# $(fileinfo) Version $(version)## by $(author)## Generates a number of possible output files from a LaTeX document and its# various dependencies. Handles .bib files, \include and \input, and .eps# graphics. All dependencies are handled automatically by running LaTeX over# the source.## USAGE:## make [GRAY=1] [VERBOSE=1] [SHELL_DEBUG=1] <target(s)>## STANDARD OPTIONS:# GRAY:# Setting this variable forces all recompiled graphics to be grayscale.# It is useful when creating a document for printing. The default is# to allow colors. Note that it only changes graphics that need to be# rebuilt! It is usually a good idea to do a 'make clean' first.## VERBOSE:# This turns off all @ prefixes for commands invoked by make. Thus,# you get to see all of the gory details of what is going on.## SHELL_DEBUG:# This enables the -x option for sh, meaning that everything it does is# echoed to stderr. This is particularly useful for debugging# what is going on in $$(shell ...) invocations. One of my favorite# debugging tricks is to do this:## make -d SHELL_DEBUG=1 VERBOSE=1 2>&1 | less## KEEP_TEMP:# When set, this allows .make and other temporary files to stick around# long enough to do some debugging. This can be useful when trying to# figure out why gnuplot is not doing the right things, for example# (e.g., look for *head.make).## STANDARD AUXILIARY FILES:## Variables.ini (formerly Makefile.ini, which still works)## This file can contain variable declarations that override various# aspects of the makefile. For example, one might specify## neverclean := *.pdf *.ps# onlysources.tex := main.tex# LATEX_COLOR_WARNING := 'bold red uline'## And this would override the neverclean setting to ensure that pdf# and ps files always remain behind, set the makefile to treat all# .tex files that are not "main.tex" as includes (and therefore not# default targets). It also changes the LaTeX warning output to be# red, bold, and underlined.## There are numerous variables in this file that can be overridden in# this way. Search for '?=' to find them all.## The Variables.ini is imported before *anything else* is done, so go# wild with your ideas for changes to this makefile in there. It# makes it easy to test them before submitting patches.## If you're adding rules or targets, however, see Targets.ini below.## Targets.ini## This is included much later in the makefile, after all variables and# targets are defined. This is where you would put new make rules,# e.g.,## generated.tex: generating_script.weird_lang depA depB# ./generating_script.weird_lang > $$@## In this file, you have access to all of the variables that the# makefile creates, like $$(onlysources.tex). While accessing those can# be somewhat brittle (they are implementation details and may change),# it is a great way to test your ideas when submitting feature requests.## STANDARD ENVIRONMENT VARIABLES:## LATEX_COLOR_WARNING '$(LATEX_COLOR_WARNING)'# LATEX_COLOR_ERROR '$(LATEX_COLOR_ERROR)'# LATEX_COLOR_UNDERFULL '$(LATEX_COLOR_UNDERFULL)'# LATEX_COLOR_OVERFULL '$(LATEX_COLOR_OVERFULL)'# LATEX_COLOR_PAGES '$(LATEX_COLOR_PAGES)'# LATEX_COLOR_BUILD '$(LATEX_COLOR_BUILD)'# LATEX_COLOR_GRAPHIC '$(LATEX_COLOR_GRAPHIC)'# LATEX_COLOR_DEP '$(LATEX_COLOR_DEP)'# LATEX_COLOR_SUCCESS '$(LATEX_COLOR_SUCCESS)'# LATEX_COLOR_FAILURE '$(LATEX_COLOR_FAILURE)'## These may be redefined in your environment to be any of the following:## black# red# green# yellow# blue# magenta# cyan# white## Bold or underline may be used, as well, either alone or in combination# with colors:## bold# uline## Order is not important. You may want, for example, to specify:## export LATEX_COLOR_SUCCESS='bold blue uline'## in your .bashrc file. I don't know why, but you may want to.## STANDARD TARGETS:## all:# Make all possible documents in this directory. The documents are# determined by scanning for .tex and .tex.sh (described in more detail# later) and omitting any file that ends in ._include_.tex or# ._nobuild_.tex. The output is a set of .pdf files.## If you wish to omit files without naming them with the special# underscore names, set the following near the top of the Makefile,# or (this is recommended) within a Makefile.ini in the same directory:## includes.tex := file1.tex file2.tex## This will cause the files listed to be considered as include files.## If you have only few source files, you can set## onlysources.tex := main.tex## This will cause only the source files listed to be considered in# dependency detection. All other .tex files will be considered as# include files. Note that these options work for *any* source type,# so you could do something similar with includes.gpi, for example.# Note that this works for *any valid source* target. All of the# onlysources.* variables are commented out in the shipping version of# this file, so it does the right thing when they simply don't exist.# The comments are purely documentation. If you know, for example, that# file.mycoolformat is supported by this Makefile, but don't see the# "onlysources.mycoolformat" declared in the comments, that doesn't mean# you can't use it. Go ahead and set "onlysources.mycoolformat" and it# should do the right thing.## show:# Builds and displays all documents in this directory. It uses the# environment-overridable value of VIEW_PDF (currently $(VIEW_PDF)) to# do its work.## all-graphics:# Make all of the graphics in this directory.## all-pstex (only for BUILD_STRATEGY=latex):# Build all fig files into pstex and pstex_t files. Gray DOES NOT WORK.## all-gray-pstex (only for BUILD_STRATEGY=latex):# Build all fig files into grayscale pstex and pstex_t files.## all-dot2tex:# Build all dot files into tex files.## show-graphics:# Builds and displays all graphics in this directory. Uses the# environment-overridable value of VIEW_GRAPHICS (currently# $(VIEW_GRAPHICS)) to do its work.## clean:# Remove ALL generated files, leaving only source intact.# This will *always* skip files mentioned in the "neverclean" variable,# either in this file or specified in Makefile.ini:## neverclean := *.pdf *.ps## The neverclean variable works on all "clean" targets below, as well.## clean-graphics:# Remove all generated graphics files.## clean-backups:# Remove all backup files: $(backup_patterns)# (XFig and other editors have a nasty habit of leaving them around)# Also removes Makefile-generated .temp files## clean-tex:# Remove all files generated from LaTeX invocations except dependency# information. Leaves graphics alone.## clean-deps:# Removes all auto-generated dependency information.## clean-auxiliary:# Removes extra files created by various targets (like the dependency# graph output).## clean-nographics:# Cleans everything *except* the graphics files.## help:# This help text.## version:# Version information about this LaTeX makefile.## DEBUG TARGETS:## _all_programs:# A list of the programs used by this makefile.## _check_programs:# Checks your system for the needed software and reports what it finds.## _check_gpi_files:# Checks the .gpi files in the current directory for common errors, such# as specification of the terminal or output file inside of the gpi file# itself.## _dependency_graph:# Outputs a .dot file to stdout that represents a graph of LaTeX# dependencies. To see it, use the _show_dependency_graph target or# direct the output to a file, run dot on it, and view the output, e.g.:## make _dependency_graph > graph.dot# dot -T ps -o graph.eps graph.dot# gv graph.eps## _show_dependency_graph:# Makes viewing the graph simple: extracts, builds and displays the# dependency graph given in the _dependency_graph target using the value# of the environment-overridable VIEW_POSTSCRIPT variable (currently set# to $(VIEW_POSTSCRIPT)). The postscript viewer is used because it# makes it easier to zoom in on the graph, a critical ability for# something so dense and mysterious.## _all_sources:# List all .tex files in this directory.## _sources:# Print out a list of all compilable sources in this directory. This is# useful for determining what make thinks it will be using as the# primary source for 'make all'.## _scripts:# Print out a list of scripts that make knows can be used to generate# .tex files (described later).## _all_stems:# Print a list of stems. These represent bare targets that can be# executed. Listing <stem> as a bare target will produce <stem>.pdf.## _includes:# A list of .d files that would be included in this run if _includes# weren't specified. This target may be used alone or in conjunction# with other targets.## _graphic_outputs:# A list of all generated .eps files## _env:# A list of environment variables and their values. If supported by# your version of make, also a list of variables known to make.## FILE TARGETS:## %, %.pdf:# Build a PDF file from the corresponding %.tex file.## If BUILD_STRATEGY=pdflatex, then this builds the pdf directly.# Otherwise, it uses this old-school but effective approach:## latex -> dvips -> ps2pdf## The BUILD_STRATEGY can be overridden in Makefile.ini in the same# directory. The default is pdflatex.## Reasons for using latex -> dvips include the "psfrag" package, and the# generation of postscript instead of PDF. Arguments for using pdflatex# include "new and shiny" and "better supported." I can't argue with# either of those, and supporting them both didn't turn out to be that# difficult, so there you have it. Choices.## %._show:# A phony target that builds the pdf file and then displays it using the# environment-overridable value of VIEW_PDF ($(VIEW_PDF)).## %._graphics:# A phony target that generates all graphics on which %.pdf (or %.dvi)# depends.## %.ps (only for BUILD_STRATEGY=latex):# Build a Postscript file from the corresponding %.tex file.# This is done using dvips. Paper size is automatically# extracted from the declaration## \documentclass[<something>paper]## or it is the system default.## If using beamer (an excellent presentation class), the paper# size is ignored. More on this later.## %.dvi (only for BUILD_STRATEGY=latex):# Build the DVI file from the corresponding %.tex file.## %.ind:# Build the index for this %.tex file.## %.gls:# Build the nomenclature glossary for this %.tex file.## %.nls:# Build the (newer) nomenclature file for this %.tex file.## %.eps:# Build an eps file from one of the following file types:## .dot : graphviz# .gpi : gnuplot# .fig : xfig# .xvg : xmgrace# .svg : scalable vector graphics (goes through inkscape)# .png : png (goes through NetPBM)# .jpg : jpeg (goes through ImageMagick)# .eps.gz : gzipped eps## The behavior of this makefile with each type is described in# its own section below.## %.pstex{,_t} (only for BUILD_STRATEGY=latex):# Build a .pstex_t file from a .fig file.## FEATURES:## Optional Binary Directory:# If you create the _out_ directory in the same place as the makefile,# it will automatically be used as a dumping ground for .pdf (or .dvi,# .ps, and .pdf) output files.## Alternatively, you can set the BINARY_TARGET_DIR variable, either as a# make argument or in Makefile.ini, to point to your directory of# choice. Note that no pathname wildcard expansion is done in the# makefile, so make sure that the path is complete before going in# there. E.g., if you want to specify something in your home directory,# use $$HOME/ instead of ~/ so that the shell expands it before it gets# to the makefile.## External Program Dependencies:# Every external program used by the makefile is represented by an# ALLCAPS variable at the top of this file. This should allow you to# make judgments about whether your system supports the use of this# makefile. The list is available in the ALL_PROGRAMS variable and,# provided that you are using GNU make 3.80 or later (or you haven't# renamed this file to something weird like "mylatexmakefile" and like# invoking it with make -f) can be viewed using## make _all_programs## Additionally, the availability of these programs can be checked# automatically for you by running## make _check_programs## The programs are categorized according to how important they are and# what function they perform to help you decide which ones you really# need.## Colorized Output:# The output of commands is colorized to highlight things that are often# important to developers. This includes {underfull,overfull}# {h,v}boxes, general LaTeX Errors, each stage of document building, and# the number of pages in the final document. The colors are obtained# using 'tput', so colorization should work pretty well on any terminal.## The colors can be customized very simply by setting any of the# LATEX_COLOR_<CONTEXT> variables in your environment (see above).## Predecessors to TeX Files:# Given a target <target>, if no <target>.tex file exists but a# corresponding script or predecessor file exists, then appropriate# action will be taken to generate the tex file.## Currently supported script or predecessor languages are:## sh: %.tex.sh# perl: %.tex.pl# python: %.tex.py## Calls the script using the appropriate interpreter, assuming that# its output is a .tex file.## The script is called thus:## <interpreter> <script file name> <target tex file>## and therefore sees exactly one parameter: the name of the .tex# file that it is to create.## Why does this feature exist? I ran into this while working on# my paper dissertation. I wrote a huge bash script that used a# lot of sed to bring together existing papers in LaTeX. It# would have been nice had I had something like this to make my# life easier, since as it stands I have to run the script and# then build the document with make. This feature provides hooks# for complicated stuff that you may want to do, but that I have# not considered. It should work fine with included dependencies,# too.## Scripts are run every time make is invoked. Some trickery is# employed to make sure that multiple restarts of make don't cause# them to be run again.## reST: %.rst## Runs the reST to LaTeX converter to generate a .tex file# If it finds a file names _rststyle_._include_.tex, uses it as# the "stylesheet" option to rst2latex.## Note that this does not track sub-dependencies in rst files. It# assumes that the top-level rst file will change if you want a# rebuild.## literate Haskell: %.lhs## Runs the lhs2tex program to generate a .tex file.## Dependencies:## In general, dependencies are extracted directly from LaTeX output on# your document. This includes## * Bibliography information# * \include or \input files (honoring \includeonly, too)# * Graphics files inserted by the graphicx package## Where possible, all of these are built correctly and automatically.# In the case of graphics files, these are generated from the following# file types:## GraphViz: .dot# GNUPlot: .gpi# XFig: .fig# XMgrace: .xvg# SVG: .svg# PNG: .png# JPEG: .jpg# GZipped EPS: .eps.gz## If the file exists as a .eps already, it is merely used (and will not# be deleted by 'clean'!).## LaTeX and BibTeX are invoked correctly and the "Rerun to get# cross-references right" warning is heeded a reasonable number of# times. In my experience this is enough for even the most troublesome# documents, but it can be easily changed (if LaTeX has to be run after# BibTeX more than three times, it is likely that something is moving# back and forth between pages, and no amount of LaTeXing will fix# that).## \includeonly is honored by this system, so files that are not# specified there will not trigger a rebuild when changed.## Beamer:# A special TeX source comment is recognized by this makefile (only when# BUILD_STRATEGY=latex, since this invokes psnup):## %%[[:space:]]*BEAMER[[:space:]]*LARGE## The presence of this comment forces the output of dvips through psnup# to enlarge beamer slides to take up an entire letter-sized page. This# is particularly useful when printing transparencies or paper versions# of the slides. For some reason landscape orientation doesn't appear# to work, though.## If you want to put multiple slides on a page, use this option and then# print using mpage, a2ps, or psnup to consolidate slides. My personal# favorite is a2ps, but your mileage may vary.## When beamer is the document class, dvips does NOT receive a paper size# command line attribute, since beamer does special things with sizes.## GNUPlot Graphics:# When creating a .gpi file, DO NOT INCLUDE the "set terminal" or "set# output" commands! The makefile will include terminal information for# you. Besides being unnecessary and potentially harmful, including the# terminal definition in the .gpi file makes it harder for you, the one# writing the document, to preview your graphics, e.g., with## gnuplot -persist myfile.gpi## so don't do specify a terminal or an output file in your .gpi files.## When building a gpi file into an eps file, there are several features# available to the document designer:## Global Header:# The makefile searches for the files in the variable GNUPLOT_GLOBAL# in order:## ($(GNUPLOT_GLOBAL))## Only the first found is used. All .gpi files in the directory are# treated as though the contents of GNUPLOT_GLOBAL were directly# included at the top of the file.## NOTE: This includes special comments! (see below)## Font Size:# A special comment in a .gpi file (or a globally included file) of# the form## ## FONTSIZE=<number>## will change the font size of the GPI output. If font size is# specified in both the global file and the GPI file, the# specification in the individual GPI file is used.## Grayscale Output:# GNUplot files also support a special comment to force them to be# output in grayscale *no matter what*:## ## GRAY## This is not generally advisable, since you can always create a# grayscale document using the forms mentioned above. But, if your# plot simply must be grayscale even in a document that allows# colors, this is how you do it.## XFig Graphics:# No special handling is done with XFig, except when a global# grayscale method is used, e.g.## make GRAY=1 document## In these cases the .eps files is created using the -N switch to# fig2dev to turn off color output. (Only works with eps, not pstex# output)## GraphVis Graphics:# Color settings are simply ignored here. The 'dot' program is used# to transform a .dot file into a .eps file.## If you want, you can use the dot2tex program to convert dot files# to tex graphics. The default is to just call dot2tex with no# arguments, but you can change the DOT2TEX definition to include# options as needed (in your Makefile.ini).## Note that, as with pstex, the makefile cannot use latex's own# output to discover all missing dot_t (output) files, since anytime# TeX includes TeX, it has to bail when it can't find the include# file. It can therefore only stop on the first missing file it# discovers, and we can't get a large list of them out easily.## So, the makefile errors out if it's missing an included dot_t# file, then prompts the user to run this command manually:## make all-dot2tex## GZipped EPS Graphics:## A .eps.gz file is sometimes a nice thing to have. EPS files can get# very large, especially when created from bitmaps (don't do this if you# don't have to). This makefile will unzip them (not in place) to# create the appropriate EPS file.##endef## DEPENDENCY CHART:## digraph "g" {# rankdir=TB# size="9,9"# edge [fontsize=12 weight=10]# node [shape=box fontsize=14 style=rounded]## eps [# shape=Mrecord# label="{{<gpi> GNUplot|<epsgz> GZip|<dot> Dot|<fig> XFig}|<eps> eps}"# ]# pstex [label="%.pstex"]# pstex_t [label="%.pstex_t"]# tex_outputs [shape=point]# extra_tex_files [shape=point]# gpi_data [label="<data>"]# gpi_includes [label="_include_.gpi"]# aux [label="%.aux"]# fls [label="%.fls"]# idx [label="%.idx"]# glo [label="%.glo"]# ind [label="%.ind"]# log [label="%.log"]# tex_sh [label="%.tex.sh"]# rst [label="%.rst"]# tex [# shape=record# label="<tex> %.tex|<include> _include_.tex"# ]# include_aux [label="_include_.aux"]# file_bib [label=".bib"]# bbl [label="%.bbl"]# dvi [label="%.dvi"]# ps [label="%.ps"]# pdf [label="%.pdf"]# fig [label=".fig"]# dot [label=".dot"]# gpi [label=".gpi"]# eps_gz [label=".eps.gz"]## gpi_files [shape=point]## rst -> tex:tex [label="reST"]# tex_sh -> tex:tex [label="sh"]# tex_pl -> tex:tex [label="perl"]# tex_py -> tex:tex [label="python"]# tex -> tex_outputs [label="latex"]# tex_outputs -> dvi# tex_outputs -> aux# tex_outputs -> log# tex_outputs -> fls# tex_outputs -> idx# tex_outputs -> include_aux# aux -> bbl [label="bibtex"]# file_bib -> bbl [label="bibtex"]# idx -> ind [label="makeindex"]# glo -> gls [label="makeindex"]# nlo -> nls [label="makeindex"]# gls -> extra_tex_files# nls -> extra_tex_files# ind -> extra_tex_files# bbl -> extra_tex_files# eps -> extra_tex_files# extra_tex_files -> dvi [label="latex"]# gpi_files -> eps:gpi [label="gnuplot"]# gpi -> gpi_files# gpi_data -> gpi_files# gpi_includes -> gpi_files# eps_gz -> eps:epsgz [label="gunzip"]# fig -> eps:fig [label="fig2dev"]# fig -> pstex [label="fig2dev"]# fig -> pstex_t [label="fig2dev"]# pstex -> pstex_t [label="fig2dev"]# dot -> eps:dot [label="dot"]# dvi -> ps [label="dvips"]# include_aux -> bbl [label="bibtex"]# ps -> pdf [label="ps2pdf"]## edge [ color=blue label="" style=dotted weight=1 fontcolor=blue]# fls -> tex:include [label="INPUT: *.tex"]# fls -> file_bib [label="INPUT: *.aux"]# aux -> file_bib [label="\\bibdata{...}"]# include_aux -> file_bib [label="\\bibdata{...}"]# log -> gpi [label="Graphic file"]# log -> fig [label="Graphic file"]# log -> eps_gz [label="Graphic file"]# log -> dot [label="Graphic file"]# log -> idx [label="No file *.ind"]# log -> glo [label="No file *.gls"]# log -> nlo [label="No file *.nls"]# gpi -> gpi_data [label="plot '...'"]# gpi -> gpi_includes [label="load '...'"]# tex:tex -> ps [label="paper"]# tex:tex -> pdf [label="embedding"]# }### DEPENDENCY CHART SCRIPT## $(call output_dependency_graph,[<output file>])define output-dependency-graphif [ -f '$(this_file)' ]; then \$(SED) \-e '/^[[:space:]]*#[[:space:]]*DEPENDENCY CHART:/,/^$$/!d' \-e '/DEPENDENCY CHART/d' \-e '/^$$/d' \-e 's/^[[:space:]]*#//' \$(this_file) $(if $1,> '$1',); \else \$(ECHO) "Cannot determine the name of this makefile."; \fiendef#.PHONY: Targets.ini $(HOME)/.latex-makefile/Targets.ini-include Targets.ini-include $(HOME)/.latex-makefile/Targets.ini## vim: noet sts=0 sw=8 ts=8
Go to most recent revision | Compare with Previous | Blame | View Log