URL
https://opencores.org/ocsvn/pit/pit/trunk
Subversion Repositories pit
[/] [pit/] [trunk/] [bench/] [verilog/] [wb_master_model.v] - Rev 19
Go to most recent revision | Compare with Previous | Blame | View Log
/////////////////////////////////////////////////////////////////////// //// //// //// WISHBONE rev.B2 Wishbone Master model //// //// //// //// //// //// Author: Richard Herveille //// //// richard@asics.ws //// //// www.asics.ws //// //// //// //// Downloaded from: http://www.opencores.org/projects/mem_ctrl //// //// //// /////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001 Richard Herveille //// //// richard@asics.ws //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY //// //// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED //// //// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS //// //// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR //// //// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, //// //// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES //// //// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE //// //// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR //// //// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF //// //// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT //// //// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT //// //// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE //// //// POSSIBILITY OF SUCH DAMAGE. //// //// //// /////////////////////////////////////////////////////////////////////// // CVS Log // // $Id: wb_master_model.v,v 1.4 2004/02/28 15:40:42 rherveille Exp $ // // $Date: 2004/02/28 15:40:42 $ // $Revision: 1.4 $ // $Author: rherveille $ // $Locker: $ // $State: Exp $ // // Change History: // `include "timescale.v" module wb_master_model #(parameter dwidth = 32, parameter awidth = 32) ( output reg cyc, output reg stb, output reg we, output reg [dwidth/8 -1:0] sel, output reg [awidth -1:0] adr, output reg [dwidth -1:0] dout, input [dwidth -1:0] din, input clk, input ack, input rst, // No Connect input err, // No Connect input rty // No Connect ); //////////////////////////////////////////////////////////////////// // // Local Wires // reg [dwidth -1:0] q; event cmp_error_detect; //////////////////////////////////////////////////////////////////// // // Memory Logic // initial begin //adr = 32'hxxxx_xxxx; //adr = 0; adr = {awidth{1'bx}}; dout = {dwidth{1'bx}}; cyc = 1'b0; stb = 1'bx; we = 1'hx; sel = {dwidth/8{1'bx}}; #1; $display("\nINFO: WISHBONE MASTER MODEL INSTANTIATED (%m)"); end //////////////////////////////////////////////////////////////////// // // Wishbone write cycle // task wb_write; input delay; integer delay; input [awidth -1:0] a; input [dwidth -1:0] d; begin // wait initial delay repeat(delay) @(posedge clk); // assert wishbone signal #1; adr = a; dout = d; cyc = 1'b1; stb = 1'b1; we = 1'b1; sel = {dwidth/8{1'b1}}; @(posedge clk); // wait for acknowledge from slave while(~ack) @(posedge clk); // negate wishbone signals #1; cyc = 1'b0; stb = 1'bx; adr = {awidth{1'bx}}; dout = {dwidth{1'bx}}; we = 1'hx; sel = {dwidth/8{1'bx}}; end endtask //////////////////////////////////////////////////////////////////// // // Wishbone read cycle // task wb_read; input delay; integer delay; input [awidth -1:0] a; output [dwidth -1:0] d; begin // wait initial delay repeat(delay) @(posedge clk); // assert wishbone signals #1; adr = a; dout = {dwidth{1'bx}}; cyc = 1'b1; stb = 1'b1; we = 1'b0; sel = {dwidth/8{1'b1}}; @(posedge clk); // wait for acknowledge from slave while(~ack) @(posedge clk); // negate wishbone signals d = din; // Grab the data on the posedge of clock #1; // Delay the clearing (hold time of the control signals cyc = 1'b0; stb = 1'bx; adr = {awidth{1'bx}}; dout = {dwidth{1'bx}}; we = 1'hx; sel = {dwidth/8{1'bx}}; d = din; end endtask //////////////////////////////////////////////////////////////////// // // Wishbone compare cycle (read data from location and compare with expected data) // task wb_cmp; input delay; integer delay; input [awidth -1:0] a; input [dwidth -1:0] d_exp; begin wb_read (delay, a, q); if (d_exp !== q) begin -> cmp_error_detect; $display("Data compare error at address %h. Received %h, expected %h at time %t", a, q, d_exp, $time); end end endtask endmodule
Go to most recent revision | Compare with Previous | Blame | View Log