URL
https://opencores.org/ocsvn/potato/potato/trunk
Subversion Repositories potato
[/] [potato/] [trunk/] [soc/] [pp_soc_gpio.vhd] - Rev 12
Go to most recent revision | Compare with Previous | Blame | View Log
-- The Potato Processor - A simple processor for FPGAs -- (c) Kristian Klomsten Skordal 2014 - 2015 <kristian.skordal@wafflemail.net> -- Report bugs and issues on <https://github.com/skordal/potato/issues> library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; --! @brief Generic Wishbone GPIO Module. --! The following registers are defined: --! * 0: Input values, one bit per GPIO (read-only) --! * 1: Output values, one bit per GPIO (read/write) --! * 2: Direction register, 0 means input, 1 means output. entity pp_soc_gpio is generic( NUM_GPIOS : natural := 32 ); port( clk : in std_logic; reset : in std_logic; -- GPIO interface: gpio : inout std_logic_vector(NUM_GPIOS - 1 downto 0); -- Wishbone interface: wb_adr_in : in std_logic_vector( 1 downto 0); wb_dat_in : in std_logic_vector(31 downto 0); wb_dat_out : out std_logic_vector(31 downto 0); wb_cyc_in : in std_logic; wb_stb_in : in std_logic; wb_we_in : in std_logic; wb_ack_out : out std_logic ); end entity pp_soc_gpio; architecture behaviour of pp_soc_gpio is signal direction_register : std_logic_vector(NUM_GPIOS - 1 downto 0); signal output_register : std_logic_vector(NUM_GPIOS - 1 downto 0); signal input_register : std_logic_vector(NUM_GPIOS - 1 downto 0); signal ack : std_logic := '0'; begin assert NUM_GPIOS > 0 and NUM_GPIOS <= 32 report "Only a number between 1 and 32 (inclusive) GPIOs are supported!" severity FAILURE; io_setup: for i in 0 to NUM_GPIOS - 1 generate gpio(i) <= 'Z' when direction_register(i) = '0' else output_register(i); input_register(i) <= gpio(i) when direction_register(i) = '0' else '0'; end generate; wb_ack_out <= ack and wb_cyc_in and wb_stb_in; wishbone: process(clk) begin if rising_edge(clk) then if reset = '1' then direction_register <= (others => '0'); output_register <= (others => '0'); wb_dat_out <= (others => '0'); ack <= '0'; else if wb_cyc_in = '1' and wb_stb_in = '1' and ack = '0' then if wb_we_in = '1' then case wb_adr_in is when b"01" => output_register <= wb_dat_in(NUM_GPIOS - 1 downto 0); when b"10" => direction_register <= wb_dat_in(NUM_GPIOS - 1 downto 0); when others => end case; ack <= '1'; else case wb_adr_in is when b"00" => wb_dat_out <= std_logic_vector(resize(unsigned(input_register), wb_dat_out'length)); when b"01" => wb_dat_out <= std_logic_vector(resize(unsigned(output_register), wb_dat_out'length)); when b"10" => wb_dat_out <= std_logic_vector(resize(unsigned(direction_register), wb_dat_out'length)); when others => end case; ack <= '1'; end if; elsif wb_stb_in = '0' then ack <= '0'; end if; end if; end if; end process wishbone; end architecture behaviour;
Go to most recent revision | Compare with Previous | Blame | View Log