OpenCores
URL https://opencores.org/ocsvn/potato/potato/trunk

Subversion Repositories potato

[/] [potato/] [trunk/] [src/] [pp_fifo.vhd] - Rev 64

Go to most recent revision | Compare with Previous | Blame | View Log

-- The Potato Processor - A simple processor for FPGAs
-- (c) Kristian Klomsten Skordal 2014 - 2015 <kristian.skordal@wafflemail.net>
-- Report bugs and issues on <http://opencores.org/project,potato,bugtracker>
 
library ieee;
use ieee.std_logic_1164.all;
 
--! @brief A generic FIFO module.
--! Adopted from the FIFO module in <https://github.com/skordal/smallthings>.
entity pp_fifo is
	generic(
		DEPTH : natural := 64;
		WIDTH : natural := 31
	);
	port(
		-- Control lines:
		clk   : in std_logic;
		reset : in std_logic;
 
		-- Status lines:
		full  : out std_logic;
		empty : out std_logic;
 
		-- Data in:
		data_in   : in  std_logic_vector(WIDTH - 1 downto 0);
		data_out  : out std_logic_vector(WIDTH - 1 downto 0);
		push, pop : in std_logic
	);
end entity pp_fifo;
 
architecture behaviour of pp_fifo is
 
	type memory_array is array(0 to DEPTH - 1) of std_logic_vector(WIDTH - 1 downto 0);
	shared variable memory : memory_array := (others => (others => '0'));
 
	subtype index_type is integer range 0 to DEPTH - 1;
	signal top, bottom : index_type;
 
	type fifo_op is (FIFO_POP, FIFO_PUSH);
	signal prev_op : fifo_op := FIFO_POP;
 
begin
 
	empty <= '1' when top = bottom and prev_op = FIFO_POP else '0';
	full <= '1' when top = bottom and prev_op = FIFO_PUSH else '0';
 
	read: process(clk)
	begin
		if rising_edge(clk) then
			if reset = '1' then
				bottom <= 0;
			else
				if pop = '1' then
					data_out <= memory(bottom);
					bottom <= (bottom + 1) mod DEPTH;
				end if;
			end if;
		end if;
	end process read;
 
	write: process(clk)
	begin
		if rising_edge(clk) then
			if reset = '1' then
				top <= 0;
			else
				if push = '1' then
					memory(top) := data_in;
					top <= (top + 1) mod DEPTH;
				end if;
			end if;
		end if;
	end process write;
 
	set_prev_op: process(clk)
	begin
		if rising_edge(clk) then
			if reset = '1' then
				prev_op <= FIFO_POP;
			else
				if push = '1' and pop = '1' then
					prev_op <= FIFO_POP;
				elsif push = '1' then
					prev_op <= FIFO_PUSH;
				elsif pop = '1' then
					prev_op <= FIFO_POP;
				end if;
			end if;
		end if;
	end process set_prev_op;
 
end architecture behaviour;
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.