Subversion Repositories ps2

#!/bin/csh -f
 
#//////////////////////////////////////////////////////////////////////
#////                                                              ////
#////  run_ps2_sim.scr                                             ////
#////                                                              ////
#////  This file is part of the "ps2" project                      ////
#////  http://www.opencores.org/cores/ps2/                         ////
#////                                                              ////
#////  Author(s):                                                  ////
#////      - mihad@opencores.org                                   ////
#////      - Miha Dolenc                                           ////
#////                                                              ////
#////  All additional information is avaliable in the README.txt   ////
#////  file.                                                       ////
#////                                                              ////
#////                                                              ////
#//////////////////////////////////////////////////////////////////////
#////                                                              ////
#//// Copyright (C) 2000 Miha Dolenc, mihad@opencores.org          ////
#////                                                              ////
#//// This source file may be used and distributed without         ////
#//// restriction provided that this copyright statement is not    ////
#//// removed from the file and that any derivative work contains  ////
#//// the original copyright notice and the associated disclaimer. ////
#////                                                              ////
#//// This source file is free software; you can redistribute it   ////
#//// and/or modify it under the terms of the GNU Lesser General   ////
#//// Public License as published by the Free Software Foundation; ////
#//// either version 2.1 of the License, or (at your option) any   ////
#//// later version.                                               ////
#////                                                              ////
#//// This source is distributed in the hope that it will be       ////
#//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
#//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
#//// PURPOSE.  See the GNU Lesser General Public License for more ////
#//// details.                                                     ////
#////                                                              ////
#//// You should have received a copy of the GNU Lesser General    ////
#//// Public License along with this source; if not, download it   ////
#//// from http://www.opencores.org/lgpl.shtml                     ////
#////                                                              ////
#//////////////////////////////////////////////////////////////////////
#//
#// CVS Revision History
#//
#// $Log: not supported by cvs2svn $
#// Revision 1.4  2003/07/01 12:34:04  mihad
#// Added an option to use constant values instead of RAM
#// in the translation table.
#//
#// Revision 1.3  2002/04/09 13:25:52  mihad
#// Added mouse interface and everything for its handling, cleaned up some unused code
#//
#// Revision 1.2  2002/02/20 15:20:11  mihad
#// Little/big endian changes incorporated
#//
#// Revision 1.1.1.1  2002/02/18 16:16:55  mihad
#// Initial project import - working
#//
#//
 
 
echo "-MESSAGES" > ./ncvlog.args
echo "-NOCOPYRIGHT" >> ./ncvlog.args
echo "-CDSLIB ../bin/cds.lib" >> ./ncvlog.args
echo "-HDLVAR ../bin/hdl.var" >> ./ncvlog.args
echo "-INCDIR ../../../bench/verilog" >> ./ncvlog.args
echo "-INCDIR ../../../rtl/verilog" >> ./ncvlog.args
echo '-DEFINE "PS2_NUM_OF_NORMAL_SCANCODES 85"' >> ./ncvlog.args
echo '-DEFINE "PS2_NUM_OF_EXTENDED_SCANCODES 38"' >> ./ncvlog.args
echo '-DEFINE "SIM"' >> ./ncvlog.args
 
set current_par = 0
set output_waveform = 0
set xilinx = 0
 
while ( $current_par < $# )
    @ current_par = $current_par + 1 
    switch ( $argv[$current_par] )
    case 'xilinx':
        echo '-DEFINE "XILINX"' >> ./ncvlog.args
        @ xilinx = 1
        breaksw
    case 'wave':
        @ output_waveform = 1
        breaksw
    default:
        echo 'Unknown option "'$argv[$current_par]'"!'
        exit
        breaksw
    endsw
end
 
echo "-LOGFILE ../log/ncvlog.log" >> ./ncvlog.args
 
foreach filename ( `cat ../bin/rtl_file_list` )
    echo "../../../rtl/verilog/"$filename >> ./ncvlog.args
end
 
foreach filename ( `cat ../bin/sim_file_list` )
    echo "../../../bench/verilog/"$filename >> ./ncvlog.args
end
 
if ( $xilinx ) then
    foreach filename ( `cat ../bin/xilinx_file_list` ) 
        echo "../../../../xilinx_blocks/"$filename >> ./ncvlog.args
    end
endif
 
ncvlog -f ./ncvlog.args
 
echo "-MESSAGES" > ./ncelab.args
echo "-NOCOPYRIGHT" >> ./ncelab.args
echo "-CDSLIB ../bin/cds.lib" >> ./ncelab.args
echo "-HDLVAR ../bin/hdl.var" >> ./ncelab.args
echo "-LOGFILE ../log/ncelab.log" >> ./ncelab.args
echo "-SNAPSHOT worklib.ps2_test_bench:rtl" >> ./ncelab.args
echo "-ACCESS +RWC" >> ./ncelab.args
echo "worklib.ps2_test_bench" >> ./ncelab.args
 
if ( $xilinx ) then
    echo "worklib.glbl" >> ./ncelab.args 
endif
 
ncelab -f ./ncelab.args
 
echo "-MESSAGES" > ./ncsim.args
echo "-NOCOPYRIGHT" >> ./ncsim.args
echo "-CDSLIB ../bin/cds.lib"  >> ./ncsim.args
echo "-HDLVAR ../bin/hdl.var"  >> ./ncsim.args
echo "-INPUT ./ncsim.tcl" >> ./ncsim.args
echo "-LOGFILE ../log/ncsim.log" >> ./ncsim.args
echo "worklib.ps2_test_bench:rtl" >> ./ncsim.args
 
if ( $output_waveform ) then
    echo "database -open waves -shm -into ../out/waves.shm" > ./ncsim.tcl
    echo "probe -create -database waves ps2_test_bench -shm -all -depth all" >> ./ncsim.tcl
    echo "run"  >> ./ncsim.tcl
else
    echo "run"  > ./ncsim.tcl
endif
 
echo "quit" >> ./ncsim.tcl
 
ncsim -f ./ncsim.args
 
set exit_line_nb = `sed -n '/exit/=' < ../log/ncsim.log`
 
#echo "$exit_line_nb"
 
set dead_line_nb = 0
 
if ( $exit_line_nb ) then
 
  @ dead_line_nb = $exit_line_nb - 1
  set exit_line=`sed -n $exit_line_nb's/exit/&/gp' < ../log/ncsim.log`
  set dead_line=`sed -n $dead_line_nb's/report/&/gp' < ../log/ncsim.log`
 
  echo "$dead_line"
  echo "$exit_line"
 
  echo "TEST: ps2"
  if ( "$dead_line" == "report (deaddead)" ) then
    if ( "$exit_line" == "exit (00000000)"   ) then
      echo "STATUS: passed"  #|tee -a ../log/run_sim.log 2>&1
    else
      echo "STATUS: failed"  #|tee -a ../log/run_sim.log 2>&1
    endif
  else
    echo "STATUS: failed"
  endif
 
endif
 
exit